FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_8010_134_mmpm_sap.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_134_mmpm_sap.val                                        |
| SOURCE  : "sap\8010_134_mmpm_sap.pdf"                                    |
| LastModified : "2003-07-29"                                              |
| IdAndVersion : "8010.134.02.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:27:04 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : MMPM
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_134_MMPM_SAP_VAL
#define P_8010_134_MMPM_SAP_VAL


#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_134_MMPM_SAP_VAL
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__LAST_MODIFIED _2003_07_29
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__ID_AND_VERSION _8010_134_02_007

#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_04_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_134_MMPM_SAP_VAL

#undef CDG_ENTER__FILENAME

#include "p_8010_137_nas_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_152_ps_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_153_cause_include.val"   /* Access values independent from the corresponding h-file. */


/*
 * Enum to value table VAL_establish_cause
 * CCDGEN:WriteEnum_Count==26
 */
#ifndef __T_MMPM_VAL_establish_cause__
#define __T_MMPM_VAL_establish_cause__
typedef enum
{
  MMPM_CAUSE_ESTABL_ORIG_CONVERSATIONAL = 0x1,    /* Originating conversational call */
  MMPM_CAUSE_ESTABL_ORIG_STREAMING = 0x2,         /* Originating streaming call     */
  MMPM_CAUSE_ESTABL_ORIG_INTERACTIVE = 0x3,       /* Originating interactive call   */
  MMPM_CAUSE_ESTABL_ORIG_BACKGROUND = 0x4,        /* Originating background call    */
  MMPM_CAUSE_ESTABL_ORIG_HIGH_PRIO_SIGNALLING = 0x5, /* Originating high priority signalling */
  MMPM_CAUSE_ESTABL_ORIG_LOW_PRIO_SIGNALLING = 0x6 /* Originating low priority signalling */
}T_MMPM_VAL_establish_cause;
#endif

/*
 * Enum to value table VAL_reg_state
 * CCDGEN:WriteEnum_Count==27
 */
#ifndef __T_MMPM_VAL_reg_state__
#define __T_MMPM_VAL_reg_state__
typedef enum
{
  MMPM_RS_DEREGISTERED           = 0x0,           /* GMM context for SMS is removed */
  MMPM_RS_REGISTERED             = 0x1            /* GMM context for SMS is built   */
}T_MMPM_VAL_reg_state;
#endif

/*
 * user defined constants
 */
#define MMPM_MAX_N_PDU_NUMBER_LIST     (0x10)     

#include "CDG_LEAVE.h"


#endif