view cdg-hybrid/cdginc/p_8010_136_simdrv_sap.val @ 680:ee3ac8c617cb

armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_136_simdrv_sap.val                                      |
| SOURCE  : "sap\8010_136_SIMDRV_SAP.pdf"                                  |
| LastModified : "2004-06-10"                                              |
| IdAndVersion : "8010.136.03.009"                                         |
| SrcFileTime  : "Thu Nov 29 09:27:56 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : SIMDRV
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: YES
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_136_SIMDRV_SAP_VAL
#define P_8010_136_SIMDRV_SAP_VAL


#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_136_SIMDRV_SAP_VAL
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__LAST_MODIFIED _2004_06_10
#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__ID_AND_VERSION _8010_136_03_009

#define CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_56_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_136_SIMDRV_SAP_VAL

#undef CDG_ENTER__FILENAME


/*
 * Enum to value table VAL_reset_return_val
 * CCDGEN:WriteEnum_Count==29
 */
#ifndef __T_SIMDRV_VAL_reset_return_val__
#define __T_SIMDRV_VAL_reset_return_val__
typedef enum
{
  SIMDRV_SIM_INSERTED            = 0x0,           /* A SIM is inserted and ATR/PPS was successful */
  SIMDRV_SIM_NOT_INSERTED        = 0x1,           /* No SIM inserted (hardware detected) */
  SIMDRV_INVALID_CARD            = 0x2,           /* Card is not responding or gives unintelligible answers, communications time out. */
  SIMDRV_ME_FAILURE              = 0x3,           /* Power management related problems, e.g. voltage selection */
  SIMDRV_IMPROPER_CALL_BACK      = 0x4,           /* simdrv_register function called with pointer improperly set, e.g. NULL. */
  SIMDRV_ME_READER_NOT_AVAILABLE = 0x5            /* The reader requested is not available */
}T_SIMDRV_VAL_reset_return_val;
#endif

/*
 * Enum to value table VAL_len
 * CCDGEN:WriteEnum_Count==31
 */
#ifndef __T_SIMDRV_VAL_len__
#define __T_SIMDRV_VAL_len__
typedef enum
{
  SIMDRV_VAL_LEN__RANGE_MIN      = 0x0,           /* minimum                        */
  SIMDRV_VAL_LEN__RANGE_MAX      = 0x100,         /* maximum                        */
  SIMDRV_LENGTH_UNKNOWN          = 0xffff         /* Indicating that the length expected is unknown. */
}T_SIMDRV_VAL_len;
#endif

/*
 * Enum to value table VAL_sw1_2
 * CCDGEN:WriteEnum_Count==33
 */
#ifndef __T_SIMDRV_VAL_sw1_2__
#define __T_SIMDRV_VAL_sw1_2__
typedef enum
{
  SIMDRV_ERR_NOCARD              = 0x1,           /* No SIM inserted (hardware detected) */
  SIMDRV_ERR_NOT_RESET           = 0x2,           /* A reset has not been performed on the driver with the requested Id. */
  SIMDRV_ERR_ME_FAIL             = 0x3,           /* Unrecoverable ME failure (for instance interrupt fails to occur) */
  SIMDRV_ERR_RETRY_FAIL          = 0x4,           /* ME/SIM communication failed after certain retries, SIM reset required */
  SIMDRV_ERR_PARAM_WRONG         = 0x5            /* A driver function is called with invalid parameters */
}T_SIMDRV_VAL_sw1_2;
#endif

/*
 * Enum to value table VAL_cla
 * CCDGEN:WriteEnum_Count==35
 */
#ifndef __T_SIMDRV_VAL_cla__
#define __T_SIMDRV_VAL_cla__
typedef enum
{
  SIMDRV_GSM_CLASS_BYTE          = 0xa0,          /* GSM Class byte according to [GSM 11.11 / 3GPP 51.011] */
  SIMDRV_UMTS_CLASS_BYTE         = 0x80,          /* UMTS Class byte according to [ETSI 102 221 10.1.2] */
  SIMDRV_UICC_CLASS_BYTE         = 0x0            /* UICC Class byte according to [ISO 7816-4] */
}T_SIMDRV_VAL_cla;
#endif

/*
 * Enum to value table VAL_ins
 * CCDGEN:WriteEnum_Count==37
 */
#ifndef __T_SIMDRV_VAL_ins__
#define __T_SIMDRV_VAL_ins__
typedef enum
{
  SIMDRV_INS_SELECT              = 0xa4,          /* Select Instruction             */
  SIMDRV_INS_STATUS              = 0xf2,          /* Status Instruction             */
  SIMDRV_INS_READ_BINARY         = 0xb0,          /* Read Binary Instruction        */
  SIMDRV_INS_UPDATE_BINARY       = 0xd6,          /* Update Binary Instruction      */
  SIMDRV_INS_READ_RECORD         = 0xb2,          /* Read Record Instruction        */
  SIMDRV_INS_UPDATE_RECORD       = 0xdc,          /* Update Record Instruction      */
  SIMDRV_INS_SEEK                = 0xa2,          /* Seek Instruction               */
  SIMDRV_INS_INCREASE            = 0x32,          /* Increase Instruction           */
  SIMDRV_INS_VERIFY_CHV          = 0x20,          /* Verify Chv Instruction         */
  SIMDRV_INS_CHANGE_CHV          = 0x24,          /* Change Chv Instruction         */
  SIMDRV_INS_DISABLE_CHV         = 0x26,          /* Disable Chv Instruction        */
  SIMDRV_INS_ENABLE_CHV          = 0x28,          /* Ensable Chv Instruction        */
  SIMDRV_INS_UNBLOCK_CHV         = 0x2c,          /* Unblock Chv Instruction        */
  SIMDRV_INS_INVALIDATE          = 0x4,           /* Invalidate Instruction         */
  SIMDRV_INS_REHABILITATE        = 0x44,          /* Rehabilitate Instruction       */
  SIMDRV_INS_AUTHENTICATE        = 0x88,          /* Run GSM Algorithm (2/2.5G) / Authenticate (3G) Instruction */
  SIMDRV_INS_TERMINAL_PROFILE    = 0x10,          /* Terminal Profile Instruction   */
  SIMDRV_INS_ENVELOPE            = 0xc2,          /* Envelope Instruction           */
  SIMDRV_INS_FETCH               = 0x12,          /* Fetch Instruction              */
  SIMDRV_INS_TERMINAL_RESPONSE   = 0x14,          /* Terminal Response Instruction  */
  SIMDRV_INS_GET_RESPONSE        = 0xc0           /* Get Response Instruction       */
}T_SIMDRV_VAL_ins;
#endif

/*
 * Enum to value table VAL_voltage_select
 * CCDGEN:WriteEnum_Count==39
 */
#ifndef __T_SIMDRV_VAL_voltage_select__
#define __T_SIMDRV_VAL_voltage_select__
typedef enum
{
  SIMDRV_REQ_VOLTAGE_SEL         = 0x0,           /* The SIM reader driver shall perform voltage selection */
  SIMDRV_OMIT_VOLTAGE_SEL        = 0x1            /* The SIM reader driver shall restart with the current voltage */
}T_SIMDRV_VAL_voltage_select;
#endif

/*
 * Enum to value table VAL_config_requested
 * CCDGEN:WriteEnum_Count==41
 */
#ifndef __T_SIMDRV_VAL_config_requested__
#define __T_SIMDRV_VAL_config_requested__
typedef enum
{
  SIMDRV_OMIT_CONFIG_CHARACTERISTICS = 0x0,       /* PS Shall not retrieve Configuration Characteristics */
  SIMDRV_REQUEST_CONFIG_CHARACTERISTICS = 0x1     /* PS Shall retrieve Configuration Characteristics */
}T_SIMDRV_VAL_config_requested;
#endif

/*
 * Enum to value table VAL_reader_id
 * CCDGEN:WriteEnum_Count==43
 */
#ifndef __T_SIMDRV_VAL_reader_id__
#define __T_SIMDRV_VAL_reader_id__
typedef enum
{
  SIMDRV_VAL_READER_ID__RANGE_MIN = 0x1,          /* minimum                        */
  SIMDRV_VAL_READER_ID__RANGE_MAX = 0x2           /* maximum                        */
}T_SIMDRV_VAL_reader_id;
#endif

/*
 * user defined constants
 */
#define SIMDRV_SIZE_ATR_INFO           (0x21)     
#define SIMDRV_MIN_RESULT              (0x1)      
#define SIMDRV_MAX_RESULT              (0x100)    
#define SIMDRV_MIN_DATA_SIZE           (0x1)      
#define SIMDRV_MAX_DATA_SIZE           (0xff)     
#define SIMDRV_MAX_READERS             (0x2)      

#include "CDG_LEAVE.h"


#endif