FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_8010_142_smreg_sap.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_142_smreg_sap.val                                       |
| SOURCE  : "sap\8010_142_smreg_sap.pdf"                                   |
| LastModified : "2003-08-22"                                              |
| IdAndVersion : "8010.142.02.011"                                         |
| SrcFileTime  : "Thu Nov 29 09:28:36 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : SMREG
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_142_SMREG_SAP_VAL
#define P_8010_142_SMREG_SAP_VAL


#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_142_SMREG_SAP_VAL
#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__LAST_MODIFIED _2003_08_22
#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__ID_AND_VERSION _8010_142_02_011

#define CDG_ENTER__P_8010_142_SMREG_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_28_36_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_142_SMREG_SAP_VAL

#undef CDG_ENTER__FILENAME

#include "p_8010_152_ps_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_137_nas_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_153_cause_include.val"   /* Access values independent from the corresponding h-file. */


/*
 * Enum to value table VAL_pdp_type
 * CCDGEN:WriteEnum_Count==69
 */
#ifndef __T_SMREG_VAL_pdp_type__
#define __T_SMREG_VAL_pdp_type__
typedef enum
{
  SMREG_PDP_PPP                  = 0x1,           /* PDP type PPP                   */
  SMREG_PDP_EMPTY                = 0xf,           /* Dynamic address assignment in effect */
  SMREG_PDP_IPV4                 = 0x21,          /* IP version 4                   */
  SMREG_PDP_IPV6                 = 0x57           /* IP version 6                   */
}T_SMREG_VAL_pdp_type;
#endif

#include "CDG_LEAVE.h"


#endif