FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_dl.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dl.val                                                       |
| SOURCE  : "sap\dl.pdf"                                                   |
| LastModified : "2004-04-28"                                              |
| IdAndVersion : "8010.100.02.010"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:06 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : DL
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DL_VAL
#define P_DL_VAL


#define CDG_ENTER__P_DL_VAL

#define CDG_ENTER__FILENAME _P_DL_VAL
#define CDG_ENTER__P_DL_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DL_VAL__LAST_MODIFIED _2004_04_28
#define CDG_ENTER__P_DL_VAL__ID_AND_VERSION _8010_100_02_010

#define CDG_ENTER__P_DL_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_06_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DL_VAL

#undef CDG_ENTER__FILENAME

/* #include "p_8010_152_ps_include.val" */   /* Access values independent from the corresponding h-file. */

/* #include "p_8010_153_cause_include.val" */   /* Access values independent from the corresponding h-file. */

/* #include "p_8010_147_l1_include.val" */   /* Access values independent from the corresponding h-file. */


// VALTAB-FF: !TI_DUAL_MODE 
/*
 * Enum to value table VAL_l2_channel
 * CCDGEN:WriteEnum_Count==163
 */
#ifndef __T_DL_VAL_l2_channel__
#define __T_DL_VAL_l2_channel__
typedef enum
{
  DL_L2_CHANNEL_SACCH            = 0x1,           /* SACCH block                    */
  DL_L2_CHANNEL_SDCCH            = 0x2,           /* SDCCH block                    */
  DL_L2_CHANNEL_FACCH_H          = 0x3,           /* FACCH halfrate block           */
  DL_L2_CHANNEL_FACCH_F          = 0x4,           /* FACCH fullrate block           */
  DL_L2_CHANNEL_CCCH             = 0x5,           /* CCCH block                     */
  DL_L2_CHANNEL_NBCCH            = 0x6,           /* normal BCCH block              */
  DL_L2_CHANNEL_PCH              = 0x7,           /* PCH block                      */
  DL_L2_CHANNEL_EPCH             = 0x8,           /* extended PCH block             */
  DL_L2_CHANNEL_CBCH             = 0x9,           /* CBCH block                     */
  DL_L2_CHANNEL_EBCCH            = 0xa            /* extended BCCH                  */
}T_DL_VAL_l2_channel;
#endif

/*
 * Enum to value table VAL_sapi
 * CCDGEN:WriteEnum_Count==164
 */
#ifndef __T_DL_VAL_sapi__
#define __T_DL_VAL_sapi__
typedef enum
{
// VAL-FF: !TI_DUAL_MODE  
  DL_SAPI_0                      = 0x0,           /* SAPI 0                         */
// VAL-FF: !TI_DUAL_MODE  
  DL_SAPI_3                      = 0x3            /* SAPI 3                         */
}T_DL_VAL_sapi;
#endif

/*
 * Enum to value table VAL_indication
 * CCDGEN:WriteEnum_Count==165
 */
#ifndef __T_DL_VAL_indication__
#define __T_DL_VAL_indication__
typedef enum
{
  DL_ALL_DONE                    = 0x0,           /* no unacknowledges or unserved data requests */
  DL_UNSERVED                    = 0x1            /* unserved data requests         */
}T_DL_VAL_indication;
#endif

/*
 * Enum to value table VAL_mode
 * CCDGEN:WriteEnum_Count==166
 */
#ifndef __T_DL_VAL_mode__
#define __T_DL_VAL_mode__
typedef enum
{
  DL_NORMAL_RELEASE              = 0x0,           /* normal release procedure       */
  DL_LOCAL_END_RELEASE           = 0x1            /* local end release procedure    */
}T_DL_VAL_mode;
#endif

/*
 * Enum to value table VAL_cnf
 * CCDGEN:WriteEnum_Count==167
 */
#ifndef __T_DL_VAL_cnf__
#define __T_DL_VAL_cnf__
typedef enum
{
  DL_NO_CONFIRMATION             = 0x0            /* no confimation necessary       */
}T_DL_VAL_cnf;
#endif

/*
 * Enum to value table VAL_cs
 * CCDGEN:WriteEnum_Count==168
 */
#ifndef __T_DL_VAL_cs__
#define __T_DL_VAL_cs__
typedef enum
{
// VAL-FF: !TI_DUAL_MODE  
  DL_INFO_FIELD_MISMATCH         = 0x0            /* different information fields   */
}T_DL_VAL_cs;
#endif

/*
 * user defined constants
 */
#define DL_MAX_SDU_LEN                 (0x1)      
#define DL_N201_SACCH_A_B              (0x12)     
#define DL_N201_DCCH_A_B               (0x14)     
#define DL_N201_Bbis                   (0x17)     
#define DL_N201_SACCH_Bter             (0x15)     
#define DL_N201_DCCH_Bter              (0x17)     
#define DL_MAX_L2_FRAME_SIZE           (0x17)     
#define DL_SPD_PID                     (0x10)     

#include "CDG_LEAVE.h"


#endif