FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_dti.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti.val                                                      |
| SOURCE  : "sap\dti.pdf"                                                  |
| LastModified : "2000-06-29"                                              |
| IdAndVersion : "8411.110.00.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:22 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI_VAL
#define P_DTI_VAL


#define CDG_ENTER__P_DTI_VAL

#define CDG_ENTER__FILENAME _P_DTI_VAL
#define CDG_ENTER__P_DTI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI_VAL__LAST_MODIFIED _2000_06_29
#define CDG_ENTER__P_DTI_VAL__ID_AND_VERSION _8411_110_00_007

#define CDG_ENTER__P_DTI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_22_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_c_id
 */
#define DTI_NSAPI_0                    (0x0)      /* escape mechanism for future extensions */
#define DTI_NSAPI_1                    (0x1)      /* Point-To-Multipoint Multicast information */
#define DTI_NSAPI_2                    (0x2)      /* reserved for future use        */
#define DTI_NSAPI_3                    (0x3)      /* reserved for future use        */
#define DTI_NSAPI_4                    (0x4)      /* reserved for future use        */
#define DTI_NSAPI_5                    (0x5)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_6                    (0x6)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_7                    (0x7)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_8                    (0x8)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_9                    (0x9)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_10                   (0xa)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_11                   (0xb)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_12                   (0xc)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_13                   (0xd)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_14                   (0xe)      /* dynamically allocated NSAPI value */
#define DTI_NSAPI_15                   (0xf)      /* dynamically allocated NSAPI value */
#define DTI_C_ID_DEFAULT               (0x5)      /* Default value for c_id         */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_FRAME                  (0x0)      /* PPP frame                      */

/*
 * Value constants for VAL_op_ack
 */
#define OP_ACK                         (0x1)      /* acknowledged operation mode    */
#define OP_UNACK                       (0x0)      /* unacknowledged operation mode  */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

/*
 * Value constants for VAL_st_escape
 */
#define DTI_ESC_OFF                    (0x0)      /* No escape detected             */
#define DTI_ESC_ON                     (0x1)      /* Escape detected                */

#include "CDG_LEAVE.h"


#endif