FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_dti2.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_dti2.val                                                     |
| SOURCE  : "sap\dti2.pdf"                                                 |
| LastModified : "2001-09-19"                                              |
| IdAndVersion : "8411.111.01.002"                                         |
| SrcFileTime  : "Thu Nov 29 09:40:38 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_DTI2_VAL
#define P_DTI2_VAL


#define CDG_ENTER__P_DTI2_VAL

#define CDG_ENTER__FILENAME _P_DTI2_VAL
#define CDG_ENTER__P_DTI2_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_DTI2_VAL__LAST_MODIFIED _2001_09_19
#define CDG_ENTER__P_DTI2_VAL__ID_AND_VERSION _8411_111_01_002

#define CDG_ENTER__P_DTI2_VAL__SRC_FILE_TIME _Thu_Nov_29_09_40_38_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_DTI2_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_version
 */
#define DTI_VERSION_10                 (0x1)      /* version 1.0                    */

/*
 * Value constants for VAL_cause
 */
#define DTI_CAUSE_NORMAL_CLOSE         (0x0)      /* connection is closed by the entity */
#define DTI_CAUSE_UNEXPECTED_PRIMITIVE (0x1)      /* unexpected primitive received  */
#define DTI_CAUSE_UNSUPPORTED_VERSION  (0x2)      /* negotiated version is not supported */

/*
 * Value constants for VAL_p_id
 */
#define DTI_PID_IP                     (0x21)     /* simple ip packet               */
#define DTI_PID_CTCP                   (0x2d)     /* Van Jacobson compressed TCP/IP header */
#define DTI_PID_UTCP                   (0x2f)     /* Van Jacobson uncompressed TCP/IP header */
#define DTI_PID_UOS                    (0x0)      /* unstructured octet stream      */

/*
 * Value constants for VAL_st_break_len
 */
#define DTI_BREAK_OFF                  (0x0)      /* No break detected              */

/*
 * Value constants for VAL_st_flow
 */
#define DTI_FLOW_ON                    (0x0)      /* flow control is inactive       */
#define DTI_FLOW_OFF                   (0x1)      /* flow control is active         */

/*
 * Value constants for VAL_st_line_sa
 */
#define DTI_SA_ON                      (0x0)      /* SA is inactive                 */
#define DTI_SA_OFF                     (0x1)      /* SA is active                   */

/*
 * Value constants for VAL_st_line_sb
 */
#define DTI_SB_ON                      (0x0)      /* SB is inactive                 */
#define DTI_SB_OFF                     (0x1)      /* SB is active                   */

#include "CDG_LEAVE.h"


#endif