FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_gmmrr.val @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_gmmrr.val | | SOURCE : "sap\gmmrr.pdf" | | LastModified : "2003-09-02" | | IdAndVersion : "8441.101.03.025" | | SrcFileTime : "Thu Nov 29 09:42:28 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_GMMRR_VAL #define P_GMMRR_VAL #define CDG_ENTER__P_GMMRR_VAL #define CDG_ENTER__FILENAME _P_GMMRR_VAL #define CDG_ENTER__P_GMMRR_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_GMMRR_VAL__LAST_MODIFIED _2003_09_02 #define CDG_ENTER__P_GMMRR_VAL__ID_AND_VERSION _8441_101_03_025 #define CDG_ENTER__P_GMMRR_VAL__SRC_FILE_TIME _Thu_Nov_29_09_42_28_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_GMMRR_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_old_tlli */ #define GMMRR_TLLI_INVALID (0xffffffff)/* TLLI invalid (see GSM 3.03) */ /* * Value constants for VAL_service_state */ #define GMMRR_SERVICE_NONE (0x0) /* No service */ #define GMMRR_SERVICE_LIMITED (0x1) /* Limited service */ #define GMMRR_SERVICE_FULL (0x2) /* Full service */ #define GMMRR_SERVICE_UNKNOWN (0x3) /* Service unknown */ /* * Value constants for VAL_net_mode */ #define GMMRR_NET_MODE_I (0x0) /* Network operation mode I, only one Paging channel for both: PCCCH or CCCH */ #define GMMRR_NET_MODE_II (0x1) /* Network operation mode II, Paging only on CCCH */ #define GMMRR_NET_MODE_III (0x2) /* Network operation mode III, Paging on CCCH for CS and either on CCCH or on PCCCH for GPRS, if PCCH allocated in the cell */ /* * Value constants for VAL_standby_cause */ #define GMMRR_TIMEOUT_OF_T3314 (0x1) /* GMM enters state STANDBY because of timeout of READY timer T3314 */ #define GMMRR_RESET_OF_T3314 (0x2) /* GMM enters state STANDBY because GMM receives a message witrh timer_value 0 */ #define GMMRR_FORCE_TO_STANDBY (0x3) /* GMM receives a message indicating FORCE TO STANDBY */ /* * Value constants for VAL_old_ptmsi */ #define GMMRR_TMSI_INVALID (0xffffffff)/* P-TMSI or TMSI invalid (see GSM 3.03) */ /* * Value constants for VAL_v_mid */ #define V_MID_NOT_PRES (0x0) /* not present */ #define V_MID_PRES (0x1) /* present */ /* * Value constants for VAL_id_type */ #define TYPE_NO_ID (0x0) /* no identity */ #define TYPE_IMSI (0x1) /* IMSI */ #define TYPE_TMSI (0x4) /* TMSI */ /* * Value constants for VAL_response */ #define VAL_RESPONSE___DEF (0x0) /* The call is confirmed */ #define GMMRR_CS_PAGE_REJ (0x0) /* The call is rejected */ #define GMMRR_CS_PAGE_CNF (0x1) /* The call is confirmed */ /* * Value constants for VAL_page_id */ #define VAL_PAGE_ID___DEF (0x0) /* P-TMSI */ #define GMMRR_IMSI (0x0) /* IMSI */ #define GMMRR_PTMSI (0x1) /* P-TMSI */ /* * Value constants for VAL_mobile_class */ #define VAL_MOBILE_CLASS___DEF (0x0) /* Combined GPRS attach */ #define GMMRR_CLASS_A (0x1) /* Combined GPRS */ #define GMMRR_CLASS_B (0x2) /* GPRS and GSM */ #define GMMRR_CLASS_BC (0x3) /* Combined GPRS if possible, otherwise GSM only */ #define GMMRR_CLASS_BG (0x4) /* Combined GPRS if possible, otherwise GPRS only */ #define GMMRR_CLASS_CC (0x5) /* reserved. (GSM-only) */ #define GMMRR_CLASS_CG (0x6) /* GPRS-only */ /* * Value constants for VAL_susp_gprs */ #define VAL_SUSP_GPRS___DEF (0x0) /* Suspend GPRS */ #define GMMRR_NOT_SUSP_GPRS (0x0) /* Do not suspend GPRS */ #define GMMRR_SUSP_GPRS (0x1) /* Suspend GPRS */ /* * Value constants for VAL_split_pg_cycle */ #define GMMRR_NO_DRX (0x2c0) /* Non DRX mode */ /* * Value constants for VAL_lac */ #define VAL_LAC___DEF (0x0) /* lac */ #define GMMRR_LA_INVALID (0xfffe) /* la invalid */ /* * Value constants for VAL_rac */ #define GMMRR_RAC_INVALID (0xff) /* routing area code invalid */ /* * Value constants for VAL_gmmrr_non_drx_timer */ #define DRX_NO (0x0) /* no non-DRX mode after transfer state */ #define DRX_1_SEC (0x1) /* max. 1 sec non-DRX mode after transfer */ #define DRX_2_SEC (0x2) /* max. 2 sec non-DRX mode after transfer */ #define DRX_4_SEC (0x3) /* max. 4 sec non-DRX mode after transfer */ #define DRX_8_SEC (0x4) /* max. 8 sec non-DRX mode after transfer */ #define DRX_16_SEC (0x5) /* max. 16 sec non-DRX mode after transfer */ #define DRX_32_SEC (0x6) /* max. 32 sec non-DRX mode after transfer */ #define DRX_64_SEC (0x7) /* max. 64 sec non-DRX mode after transfer */ /* * Value constants for VAL_gmmrr_susp_cause */ #define GMMRR_ABNORMAL_RELEASE (0x0) /* GRR should release immediately the running TBF */ #define GMMRR_NORMAL_RELEASE (0x1) /* GRR should wait until TBF is released */ /* * Value constants for VAL_spgc_ccch_supp */ #define GMMRR_SPGC_CCCH_SUPP_NO (0x0) /* Split paging cycle on CCCH is not supported by the mobile station */ #define GMMRR_SPGC_CCCH_SUPP_YES (0x1) /* Split paging cycle on CCCH is supported by the mobile station */ /* * Value constants for VAL_cu_cause */ #define GMMRR_RA_DEFAULT (0x0) /* GRR should not perform Cell Update Access */ #define GMMRR_RA_CU (0x1) /* GRR should perforn Random Access with cause Cell Update */ /* * Value constants for VAL_rt */ #define RT_GSM (0x0) /* GSM */ #define RT_GPRS (0x1) /* GSM/GPRS */ #define RT_EDGE (0x2) /* GSM/GPRS/EDGE */ #define RT_UMTS_FDD (0x3) /* UMTS FDD */ /* * user defined constants */ #define MAX_DIGITS (0x10) #define SIZE_MCC (0x3) #define SIZE_MNC (0x3) #include "CDG_LEAVE.h" #endif