FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_gsim.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsim.val                                                     |
| SOURCE  : "sap\gsim.pdf"                                                 |
| LastModified : "2003-02-04"                                              |
| IdAndVersion : "8441.113.99.004"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:12 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSIM_VAL
#define P_GSIM_VAL


#define CDG_ENTER__P_GSIM_VAL

#define CDG_ENTER__FILENAME _P_GSIM_VAL
#define CDG_ENTER__P_GSIM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSIM_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__P_GSIM_VAL__ID_AND_VERSION _8441_113_99_004

#define CDG_ENTER__P_GSIM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_12_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSIM_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_gu
 */
#define GSIM_GU_NA                     (0x0)      /* GPRS update status not applicable (i.e. this parameter shall be ignored) */
#define GSIM_GU1_UPDATED               (0x1)      /* last GPRS attach or RAU attempt successful */
#define GSIM_GU2_NOT_UPDATED           (0x2)      /* last GPRS attach or RAU attempt failed procedurally */
#define GSIM_GU3_ROAMING_NOT_ALLOWED   (0x3)      /* last GPRS attach or RAU attempt correctly performed, but negative answer from network received */

/*
 * Value constants for VAL_tmsi
 */
#define GSIM_TMSI_INVALID              (0xffffffff)/* P-TMSI invalid (see GSM 3.03)  */

/*
 * Value constants for VAL_ptmsi_signature_flag
 */
#define GSIM_PTMSI_SIG_DEL             (0x0)      /* P-TMSI Dignature shall be deleted */
#define GSIM_PTMSI_SIG_VALID           (0x1)      /* P-TMSI Signature is valid      */
#define GSIM_PTMSI_SIG_NA              (0x2)      /* P-TMSI Signature not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_gsim_cksn
 */
#define GSIM_CKSN_NA                   (0x0)      /* GPRS ciphering key sequence number not applicable (i.e. this parameter shall be ignored) */

/*
 * Value constants for VAL_sim_gprs_invalid
 */
#define GSIM_SIM_GPRS_NA               (0x0)      /* not applicable (i.e. this parameter shall be ignored) */
#define GSIM_SIM_GPRS_VALID            (0x1)      /* SIM is considered as valid for GPRS */
#define GSIM_SIM_GPRS_INVALID          (0x2)      /* SIM is considered as invalid for GPRS */

/*
 * user defined constants
 */
#define GSIM_PTMSI_NA                  (0xffffffff)
#define SIZE_SRES                      (0x4)      
#define SIZE_KC                        (0x8)      
#define SIZE_RAND                      (0x10)     
#define MAX_IMSI                       (0x9)      

#include "CDG_LEAVE.h"


#endif