FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_mdl.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_mdl.val                                                      |
| SOURCE  : "sap\mdl.pdf"                                                  |
| LastModified : "2002-04-19"                                              |
| IdAndVersion : "6147.111.97.101"                                         |
| SrcFileTime  : "Thu Nov 29 09:45:46 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_MDL_VAL
#define P_MDL_VAL


#define CDG_ENTER__P_MDL_VAL

#define CDG_ENTER__FILENAME _P_MDL_VAL
#define CDG_ENTER__P_MDL_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MDL_VAL__LAST_MODIFIED _2002_04_19
#define CDG_ENTER__P_MDL_VAL__ID_AND_VERSION _6147_111_97_101

#define CDG_ENTER__P_MDL_VAL__SRC_FILE_TIME _Thu_Nov_29_09_45_46_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_MDL_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_ch_type
 */
#define CH_TYPE_SACCH                  (0x0)      /* SACCH                          */
#define CH_TYPE_SDCCH                  (0x1)      /* SDCCH                          */
#define CH_TYPE_FACCH                  (0x2)      /* FACCH                          */
#define CH_TYPE_BCCH                   (0x3)      /* BCCH                           */
#define CH_TYPE_CCCH                   (0x4)      /* CCCH                           */
#define CH_TYPE_RACH                   (0x5)      /* RACH                           */
#define CH_TYPE_NBR_CEL_BCCH           (0x6)      /* Neighbour Cell BCCH            */

/*
 * Value constants for VAL_sapi
 */
#define SAPI_0                         (0x0)      /* SAPI 0                         */
#define SAPI_3                         (0x3)      /* SAPI 3                         */

/*
 * Value constants for VAL_cs
 */
#define CS_T200_EXP                    (0x0)      /* T200 expired (N200 + 1 times)  */
#define CS_REEST_REQ                   (0x1)      /* re-establishment request       */
#define CS_UNSOL_UA_RESP               (0x2)      /* unsolicited UA response        */
#define CS_UNSOL_DM_RESP               (0x3)      /* unsolicited DM response        */
#define CS_UNSOL_DM_RESP_MULT_FRM      (0x4)      /* unsolicited DM response, multiple frame established state */
#define CS_UNSOL_SUP_RESP              (0x5)      /* unsolicited supervisory response */
#define CS_SEQ_ERR                     (0x6)      /* sequence error                 */
#define CS_UFRM_W_INC_PARA             (0x7)      /* U frame with incorrect parameters */
#define CS_SFRM_W_INC_PARA             (0x8)      /* S frame with incorrect parameters */
#define CS_IFRM_W_INC_MBIT             (0x9)      /* I frame with incorrect use of M bit */
#define CS_IFRM_W_INC_LEN              (0xa)      /* I frame with incorrect length  */
#define CS_FRM_NOT_IMPL                (0xb)      /* frame not implemented          */
#define CS_SABM_MULT_FRM               (0xc)      /* SABM command, multiple frame established state */
#define CS_SABM_NO_INFO                (0xd)      /* SABM command with information field not allowed in this state */
#define CS_NR_SEQ_ERR                  (0xe)      /* sequence error, perform abnormal release */

#include "CDG_LEAVE.h"


#endif