FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_mmcm.val @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mmcm.val | | SOURCE : "sap\mmcm.pdf" | | LastModified : "2004-02-12" | | IdAndVersion : "6147.104.97.103" | | SrcFileTime : "Thu Nov 29 09:45:56 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : MMCM * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MMCM_VAL #define P_MMCM_VAL #define CDG_ENTER__P_MMCM_VAL #define CDG_ENTER__FILENAME _P_MMCM_VAL #define CDG_ENTER__P_MMCM_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MMCM_VAL__LAST_MODIFIED _2004_02_12 #define CDG_ENTER__P_MMCM_VAL__ID_AND_VERSION _6147_104_97_103 #define CDG_ENTER__P_MMCM_VAL__SRC_FILE_TIME _Thu_Nov_29_09_45_56_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MMCM_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_ch_mode */ #define MMCM_CHM_SIG_ONLY (0x0) /* signalling only */ #define MMCM_CHM_SPEECH (0x1) /* speech full rate or half rate version 1 */ #define MMCM_CHM_SPEECH_V2 (0x21) /* speech full rate or half rate version 2 */ #define MMCM_CHM_SPEECH_V3 (0x41) /* speech full rate or half rate version 3 */ #define MMCM_CHM_DATA_9_6 (0x3) /* data 9.6 kBit/s */ #define MMCM_CHM_DATA_4_8 (0xb) /* data 4.8 kBit/s */ #define MMCM_CHM_DATA_2_4 (0x13) /* data 2.4 kBit/s */ #define MMCM_CHM_DATA_14_4 (0xf) /* data 2.4 kBit/s */ /* * Value constants for VAL_ch_type */ #define MMCM_CH_SDCCH (0x0) /* SDCCH channel */ #define MMCM_CH_TCH_F (0x1) /* TCH Fullrate */ #define MMCM_CH_TCH_H (0x2) /* TCH Halfrate */ /* * Value constants for VAL_estcs */ #define MMCM_ESTCS_SERV_REQ_MM (0x400) /* service requested by MM (Location updating or detach) */ #define MMCM_ESTCS_EMERGE (0x4a0) /* emergency call */ #define MMCM_ESTCS_CAL_REEST (0x4c0) /* call reestablishment */ #define MMCM_ESTCS_MOB_ORIG_SPCH (0x4e0) /* mobile originated speech call by CC */ #define MMCM_ESTCS_MOB_ORIG_DATA (0x4e1) /* mobile originated data call by CC */ #define MMCM_ESTCS_MOB_ORIG_DATA_HR_SUFF (0x4e2) /* mobile originated data call by CC, halfrate channel sufficient */ /* * Value constants for VAL_cause */ #define MMCM_MMCS_IMSI_IN_HLR (0x402) /* IMSI unknown in HLR */ #define MMCM_MMCS_ILLEGAL_MS (0x403) /* Illegal MS */ #define MMCM_MMCS_IMSI_IN_VLR (0x404) /* IMSI unknown in VLR */ #define MMCM_MMCS_IMEI_NOT_ACCEPTED (0x405) /* IMEI not accepted */ #define MMCM_MMCS_ILLEGAL_ME (0x406) /* Illegal ME */ #define MMCM_MMCS_PLMN_NOT_ALLOWED (0x40b) /* PLMN not allowed */ #define MMCM_MMCS_LA_NOT_ALLOWED (0x40c) /* Location Area not allowed */ #define MMCM_MMCS_ROAMING_NOT_ALLOWED (0x40d) /* Roaming not allowed in this location area */ #define MMCM_MMCS_NETWORK_FAILURE (0x411) /* Network failure */ #define MMCM_MMCS_CONGESTION (0x416) /* Congestion */ #define MMCM_MMCS_SERVICE_NOT_SUPPORTED (0x420) /* Service option not supported */ #define MMCM_MMCS_SERVICE_NOT_SUBSCRIBED (0x421) /* Requested service option not subscribed */ #define MMCM_MMCS_SERVICE_ORDER (0x422) /* Service option temporarily out of order */ #define MMCM_MMCS_IDENTIFIY (0x426) /* Call cannot be identified */ #define MMCM_MMCS_RETRY_IN_NEW_CELL (0x430) /* retry upon entry into a new cell (mapped 0x0430..0x043f -> 0x0430) */ #define MMCM_MMCS_INCORRECT_MESSAGE (0x45f) /* Semantically incorrect message */ #define MMCM_MMCS_INVALID_MAND_MESSAGE (0x460) /* Invalid mandatory information */ #define MMCM_MMCS_MESSAGE_TYPE_NOT_IMPLEM (0x461) /* Message type non-existent or not implemented */ #define MMCM_MMCS_MESSAGE_TYPE_INCOMPAT (0x462) /* Message type not compatible with the protocol state */ #define MMCM_MMCS_IE_NOT_IMPLEM (0x463) /* Information element non-existent or not implemented */ #define MMCM_MMCS_CONDITIONAL_IE (0x464) /* Conditional IE error */ #define MMCM_MMCS_MESSAGE_INCOMPAT (0x465) /* Message not compatible with the protocol state */ #define MMCM_MMCS_UNSPECIFIED (0x46f) /* Protocol error, unspecified */ #define MMCM_MMCS_SUCCESS (0xc400) /* No error, successful operation (MM) */ #define MMCM_MMCS_NO_REGISTRATION (0xc480) /* MS is not registered or deregistration started */ #define MMCM_MMCS_TIMER_RECOVERY (0xc481) /* time-out in MM during establishment */ #define MMCM_MMCS_NO_REESTABLISH (0xc482) /* Cell does not support call reestablishment */ #define MMCM_MMCS_INT_PREEM (0xc483) /* Preemptive release, e.g. MO-MT clash in MM */ #define MMCM_MMCS_PLMN_NOT_IDLE_MODE (0xc484) /* reject, not in idle mode (MMR_PLMN_IND) */ #define MMCM_MMCS_AUTHENTICATION_REJECTED (0xc488)/* AUTHENTICATION REJECT received */ #define MMCM_MMCS_SIM_REMOVED (0xc489) /* A valid SIM is not present */ #define MMCM_MMCS_INT_NOT_PRESENT (0xc4ff) /* No error cause (MM) */ /* * Value constants for VAL_ti */ #define MMCM_VAL_TI___7 (0x7) /* reserved */ #define MMCM_VAL_TI___F (0xf) /* reserved */ /* * Value constants for VAL_org_entity */ #define MMCM_ORG_ENTITY_CC (0x0) /* originating entity is CC */ #define MMCM_ORG_ENTITY_SS (0x1) /* originating entity is SS */ #define MMCM_ORG_ENTITY_SMS (0x2) /* originating entity is SMS */ /* * user defined constants */ #define MMCM_MM_CAUSE (0x4) #define MMCM_TI_BERLIN (0x1) #include "CDG_LEAVE.h" #endif