FreeCalypso > hg > fc-magnetite

view cdg-hybrid/cdginc/p_mmreg.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_mmreg.val                                                    |
| SOURCE  : "sap\mmreg.pdf"                                                |
| LastModified : "2003-06-13"                                              |
| IdAndVersion : "6147.100.96.110"                                         |
| SrcFileTime  : "Thu Nov 29 09:46:52 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_MMREG_VAL
#define P_MMREG_VAL


#define CDG_ENTER__P_MMREG_VAL

#define CDG_ENTER__FILENAME _P_MMREG_VAL
#define CDG_ENTER__P_MMREG_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MMREG_VAL__LAST_MODIFIED _2003_06_13
#define CDG_ENTER__P_MMREG_VAL__ID_AND_VERSION _6147_100_96_110

#define CDG_ENTER__P_MMREG_VAL__SRC_FILE_TIME _Thu_Nov_29_09_46_52_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_MMREG_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_detach_cause
 */
#define CS_SIM_REM                     (0x0)      /* Consider SIM as removed or not valid */
#define CS_POW_OFF                     (0x1)      /* Power off and delete SIM data  */
#define CS_SOFT_OFF                    (0x2)      /* Power off and keep SIM data    */

/*
 * Value constants for VAL_mode
 */
#define MODE_AUTO                      (0x0)      /* automatic mode                 */
#define MODE_MAN                       (0x1)      /* manual mode                    */

/*
 * Value constants for VAL_service
 */
#define NREG_NO_SERVICE                (0x0)      /* no service available           */
#define NREG_LIMITED_SERVICE           (0x1)      /* limited service available      */

/*
 * Value constants for VAL_forb_ind
 */
#define FORB_PLMN_NOT_INCLUDED         (0x0)      /* Not member of the forbidden PLMN list */
#define FORB_PLMN_INCLUDED             (0x1)      /* Member of the forbidden PLMN list */

/*
 * Value constants for VAL_search_running
 */
#define SEARCH_NOT_RUNNING             (0x0)      /* Network search not running anymore */
#define SEARCH_RUNNING                 (0x1)      /* Network search still running   */

/*
 * Value constants for VAL_tz
 */
#define TIMEZONE_GMT                   (0x0)      /* GMT                            */
#define TIMEZONE_GMT_PLS_1HR           (0x40)     /* GMT + 1 hour                   */
#define TIMEZONE_GMT_PLS_2HR           (0x80)     /* GMT + 2 hours                  */
#define TIMEZONE_GMT_MIN_1HR           (0x48)     /* GMT - 1 hour                   */
#define TIMEZONE_GMT_MIN_2HR           (0x88)     /* GMT - 2 hours                  */

/*
 * Value constants for VAL_month
 */

/*
 * Value constants for VAL_second
 */

/*
 * Value constants for VAL_minute
 */

/*
 * Value constants for VAL_hour
 */

/*
 * Value constants for VAL_day
 */

/*
 * Value constants for VAL_year
 */

// VALTAB-FF: REL99 
// 
// Value constants for VAL_daylight_save_time
// 
// #define MMR_ADJ_NO                     (0x0)   /* No adjustment for Daylight Saving Time */
// #define MMR_TIME_ADJ_1                 (0x1)   /* +1 hour adjustment for Daylight Saving Time */
// #define MMR_TIME_ADJ_2                 (0x2)   /* +2 hours adjustment for Daylight Saving Time */

/*
 * Value constants for VAL_service_mode
 */
#define SERVICE_MODE_LIMITED           (0x0)      /* Search for limited service required */
#define SERVICE_MODE_FULL              (0x1)      /* Search for full service required */

/*
 * Value constants for VAL_cause
 */
#define MMCS_IMSI_IN_HLR               (0x402)    /* IMSI unknown in HLR            */
#define MMCS_ILLEGAL_MS                (0x403)    /* Illegal MS                     */
#define MMCS_IMSI_IN_VLR               (0x404)    /* IMSI unknown in VLR            */
#define MMCS_IMEI_NOT_ACCEPTED         (0x405)    /* IMEI not accepted              */
#define MMCS_ILLEGAL_ME                (0x406)    /* Illegal ME                     */
#define MMCS_PLMN_NOT_ALLOWED          (0x40b)    /* PLMN not allowed               */
#define MMCS_LA_NOT_ALLOWED            (0x40c)    /* Location Area not allowed      */
#define MMCS_ROAMING_NOT_ALLOWED       (0x40d)    /* Roaming not allowed in this location area */
#define MMCS_NO_SUITABLE_CELL_IN_LA    (0x40f)    /* Find another allowed location area in the same PLMN */
#define MMCS_NETWORK_FAILURE           (0x411)    /* Network failure                */
#define MMCS_CONGESTION                (0x416)    /* Congestion                     */
#define MMCS_SERVICE_NOT_SUPPORTED     (0x420)    /* Service option not supported   */
#define MMCS_SERVICE_NOT_SUBSCRIBED    (0x421)    /* Requested service option not subscribed */
#define MMCS_SERVICE_ORDER             (0x422)    /* Service option temporarily out of order */
#define MMCS_IDENTIFIY                 (0x426)    /* Call cannot be identified      */
#define MMCS_RETRY_IN_NEW_CELL         (0x430)    /* retry upon entry into a new cell (mapped 0x0430..0x043f -> 0x0430) */
#define MMCS_INCORRECT_MESSAGE         (0x45f)    /* Semantically incorrect message */
#define MMCS_INVALID_MAND_MESSAGE      (0x460)    /* Invalid mandatory information  */
#define MMCS_MESSAGE_TYPE_NOT_IMPLEM   (0x461)    /* Message type non-existent or not implemented */
#define MMCS_MESSAGE_TYPE_INCOMPAT     (0x462)    /* Message type not compatible with the protocol state */
#define MMCS_IE_NOT_IMPLEM             (0x463)    /* Information element non-existent or not implemented */
#define MMCS_CONDITIONAL_IE            (0x464)    /* Conditional IE error           */
#define MMCS_MESSAGE_INCOMPAT          (0x465)    /* Message not compatible with the protocol state */
#define MMCS_UNSPECIFIED               (0x46f)    /* Protocol error, unspecified    */
#define MMCS_SUCCESS                   (0xc400)   /* No error, successful operation (MM) */
#define MMCS_NO_REGISTRATION           (0xc480)   /* MS is not registered or deregistration started */
#define MMCS_TIMER_RECOVERY            (0xc481)   /* time-out in MM during establishment */
#define MMCS_NO_REESTABLISH            (0xc482)   /* Cell does not support call reestablishment */
#define MMCS_INT_PREEM                 (0xc483)   /* Preemptive release, e.g. MO-MT clash in MM */
#define MMCS_PLMN_NOT_IDLE_MODE        (0xc484)   /* reject, not in idle mode (MMR_PLMN_IND) */
#define MMCS_AUTHENTICATION_REJECTED   (0xc488)   /* AUTHENTICATION REJECT received */
#define MMCS_SIM_REMOVED               (0xc489)   /* A valid SIM is not present     */
#define MMCS_INT_NOT_PRESENT           (0xc4ff)   /* No error cause (MM)            */

/*
 * Value constants for VAL_ciph
 */
#define CIPH_OFF                       (0x0)      /* ciphering off                  */
#define CIPH_ON                        (0x1)      /* ciphering on                   */

/*
 * Value constants for VAL_bootup_act
 */
#define NORMAL_REG                     (0x0)      /* Normal Registration            */
#define QUICK_REG                      (0x1)      /* Fast Registration              */

/*
 * Value constants for VAL_bootup_cause
 */
#define REG_END                        (0x0)      /* end of registration            */
#define PWR_SCAN_START                 (0x1)      /* power scanning started         */

/*
 * user defined constants
 */
#define MAX_PLMN_ID                    (0xc)      
#define MMR_MAX_TEXT_LEN               (0x28)     
#define SIZE_MCC                       (0x3)      
#define SIZE_MNC                       (0x3)      
#define MM_ORIGINATING_ENTITY          (0x4)      

#include "CDG_LEAVE.h"


#endif