FreeCalypso > hg > fc-magnetite
view cdg-hybrid/cdginc/p_mphc.val @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 25 Jun 2020 03:17:43 +0000 |
| parents | e7a67accfad9 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mphc.val | | SOURCE : "sap\mphc.pdf" | | LastModified : "2003-04-03" | | IdAndVersion : "10.10.10.011" | | SrcFileTime : "Mon Sep 26 14:30:48 2005" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MPHC_VAL #define P_MPHC_VAL #define CDG_ENTER__P_MPHC_VAL #define CDG_ENTER__FILENAME _P_MPHC_VAL #define CDG_ENTER__P_MPHC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MPHC_VAL__LAST_MODIFIED _2003_04_03 #define CDG_ENTER__P_MPHC_VAL__ID_AND_VERSION _10_10_10_011 #define CDG_ENTER__P_MPHC_VAL__SRC_FILE_TIME _Mon_Sep_26_14_30_48_2005 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MPHC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_bs_pa_mfrms */ #define VAL_BS_PA_MFRMS___2 (0x2) /* 2 Multiframe Periods */ #define VAL_BS_PA_MFRMS___3 (0x3) /* 3 Multiframe Periods */ #define VAL_BS_PA_MFRMS___4 (0x4) /* 4 Multiframe Periods */ #define VAL_BS_PA_MFRMS___5 (0x5) /* 5 Multiframe Periods */ #define VAL_BS_PA_MFRMS___6 (0x6) /* 6 Multiframe Periods */ #define VAL_BS_PA_MFRMS___7 (0x7) /* 7 Multiframe Periods */ #define VAL_BS_PA_MFRMS___8 (0x8) /* 8 Multiframe Periods */ #define VAL_BS_PA_MFRMS___9 (0x9) /* 9 Multiframe Periods */ /* * Value constants for VAL_bcch_combined */ #define COMB_CCCH_NOT_COMB (0x0) /* CCCH not combined with SDCCH */ #define COMB_CCCH_COMB (0x1) /* CCCH combined with SDCCH */ /* * Value constants for VAL_ccch_group */ #define CCCH_GROUP_TS0 (0x0) /* equal to timeslot 0 */ #define CCCH_GROUP_TS2 (0x1) /* equal to timeslot 2 */ #define CCCH_GROUP_TS4 (0x2) /* equal to timeslot 4 */ #define CCCH_GROUP_TS6 (0x3) /* equal to timeslot 6 */ /* * Value constants for VAL_page_block_index */ /* * Value constants for VAL_page_mode */ #define PGM_NORMAL (0x0) /* Use normal paging */ #define PGM_EXTENDED (0x1) /* Use extended paging */ #define PGM_REORG (0x2) /* use reorganise paging */ /* * Value constants for VAL_modulus */ /* * Value constants for VAL_radio_freq */ // VALTAB-FF: !TI_DUAL_MODE /* * Value constants for VAL_l2_channel */ #define L2_CHANNEL_SACCH (0x1) /* SACCH block */ #define L2_CHANNEL_SDCCH (0x2) /* SDCCH block */ #define L2_CHANNEL_FACCH_H (0x3) /* FACCH halfrate block */ #define L2_CHANNEL_FACCH_F (0x4) /* FACCH fullrate block */ #define L2_CHANNEL_CCCH (0x5) /* CCCH block */ #define L2_CHANNEL_NBCCH (0x6) /* normal BCCH block */ #define L2_CHANNEL_PCH (0x7) /* PCH block */ #define L2_CHANNEL_EPCH (0x8) /* extended PCH block */ #define L2_CHANNEL_CBCH (0x9) /* CBCH block */ #define L2_CHANNEL_EBCCH (0xa) /* extended BCCH */ /* * Value constants for VAL_error_flag */ #define VALID_BLOCK (0x0) /* valid block received */ #define INVALID_BLOCK (0x1) /* invalid block received */ /* * Value constants for VAL_tc */ /* * Value constants for VAL_fn_offset */ /* * Value constants for VAL_time_alignment */ /* * Value constants for VAL_timing_validity */ #define TV_INVALID_TIMING_INFO (0x0) /* timing info shall not be used, do full FB and SB detection */ #define TV_APPROX_TIMING_INFO (0x1) /* timing info may be used, do full FB and SB detection */ #define TV_VALID_TIMING_INFO (0x2) /* read SB based based on timing info (only for ncell) */ /* * Value constants for VAL_search_mode */ #define SM_WIDE_MODE (0x0) /* wideband capture and open-loop afc algorithm */ #define SM_NARROW_MODE (0x1) /* narrowband capture and open-loop afc algorithm */ /* * Value constants for VAL_bsic */ /* * Value constants for VAL_tsc */ /* * Value constants for VAL_bcch_blocks_required */ #define SI_NBLOCK_0 (0x1) /* TC 0 normal */ #define SI_NBLOCK_1 (0x2) /* TC 1 normal */ #define SI_NBLOCK_2 (0x4) /* TC 2 normal */ #define SI_NBLOCK_3 (0x8) /* TC 3 normal */ #define SI_NBLOCK_4 (0x10) /* TC 4 normal */ #define SI_NBLOCK_5 (0x20) /* TC 5 normal */ #define SI_NBLOCK_6 (0x40) /* TC 6 normal */ #define SI_NBLOCK_7 (0x80) /* TC 7 normal */ #define SI_EBLOCK_0 (0x100) /* TC 0 extended */ #define SI_EBLOCK_1 (0x200) /* TC 1 extended */ #define SI_EBLOCK_2 (0x400) /* TC 2 extended */ #define SI_EBLOCK_3 (0x800) /* TC 3 extended */ #define SI_EBLOCK_4 (0x1000) /* TC 4 extended */ #define SI_EBLOCK_5 (0x2000) /* TC 5 extended */ #define SI_EBLOCK_6 (0x4000) /* TC 6 extended */ #define SI_EBLOCK_7 (0x8000) /* TC 7 extended */ #define NCELL_BCCH_SI_2 (0x2) /* PLMN Search */ #define NCELL_BCCH_SI_3_4 (0xcc) /* Ncell BCCH */ #define NCELL_BCCH_SI_2_3_4 (0xce) /* PLMN Search */ #define NCELL_BCCH_SI_3_7_8 (0x8844) /* Ncell BCCH */ /* * Value constants for VAL_channel_type */ #define CH_TCH_F (0x1) /* TCH/F */ #define CH_TCH_H (0x2) /* TCH/H */ #define CH_SDCCH_4 (0x3) /* SDCCH/4 */ #define CH_SDCCH_8 (0x4) /* SDCCH/8 */ /* * Value constants for VAL_timeslot_no */ /* * Value constants for VAL_h */ #define NO_HOPPING (0x0) /* no hopping */ #define HOPPING (0x1) /* hopping */ /* * Value constants for VAL_hsn */ /* * Value constants for VAL_maio */ /* * Value constants for VAL_cbch_select */ #define CBCH_READ_EXT (0x1) /* read extended CBCH */ #define CBCH_READ_NORM (0x0) /* read normal CBCH */ /* * Value constants for VAL_schedule_length */ #define CBCH_NO_SCHED (0x0) /* no scheduling provided */ /* * Value constants for VAL_tb_bitmap */ #define CBCH_NORM_BLOCK2 (0x1) /* norm block 2 */ #define CBCH_NORM_BLOCK3 (0x2) /* norm block 3 */ #define CBCH_NORM_BLOCK4 (0x4) /* norm block 4 */ #define CBCH_EXT_BLOCK2 (0x8) /* ext block 2 */ #define CBCH_EXT_BLOCK3 (0x10) /* ext block 3 */ #define CBCH_EXT_BLOCK4 (0x20) /* ext block 4 */ #define CBCH_NORM_BLOCK234 (0x7) /* request all blocks */ #define CBCH_EXT_BLOCK234 (0x38) /* all ext blocks */ /* * Value constants for VAL_normal_cbch */ #define CBCH_DONT_STOP (0x0) /* dont stop cbch */ #define CBCH_STOP (0x1) /* stop cbch */ /* * Value constants for VAL_txpwr */ /* * Value constants for VAL_powerclass_gsm */ #define POW_CLASS_1 (0x1) /* Class 1 */ #define POW_CLASS_2 (0x2) /* Class 2 */ #define POW_CLASS_3 (0x3) /* Class 3 */ #define POW_CLASS_4 (0x4) /* Class 4 */ #define POW_CLASS_5 (0x5) /* Class 5 */ /* * Value constants for VAL_dtx_allowed */ #define DTX_NOTALLOWED (0x0) /* DTX is not allowed */ #define DTX_ALLOWED (0x1) /* DTX is allowed */ /* * Value constants for VAL_pwrc */ #define PWRC_NOT_SET (0x0) /* PWRC is not set */ #define PWRC_SET (0x1) /* PWRC is set */ /* * Value constants for VAL_channel_mode */ #define CM_SIGNALLING_ONLY (0x0) /* signalling only */ #define CM_TCH_FS (0x1) /* TCH full rate speech */ #define CM_TCH_HS (0x2) /* TCH half rate speech */ #define CM_TCH_96 (0x3) /* TCH data 9600 */ #define CM_TCH_F_48 (0x4) /* TCH data full rate 4800 */ #define CM_TCH_H_48 (0x5) /* TCH data half rate 4800 */ #define CM_TCH_F_24 (0x6) /* TCH data full rate 2400 */ #define CM_TCH_H_24 (0x7) /* TCH data half rate 2400 */ #define CM_TCH_EFR (0x8) /* TCH */ #define CM_TCH_144 (0x9) /* TCH */ #define CM_TCH_AHS (0xa) /* TCH AMR half rate */ #define CM_TCH_AFS (0xb) /* TCH AMR full rate */ /* * Value constants for VAL_cipher_mode */ #define CI_NO_CIPHERING (0x0) /* ciphering off */ #define CI_CIPHERING (0x1) /* ciphering on */ /* * Value constants for VAL_a5_algorithm */ #define A5_1 (0x0) /* A5/1 algorithm */ #define A5_2 (0x1) /* A5/2 algorithm */ #define A5_3 (0x2) /* A5/3 algorithm */ #define A5_4 (0x3) /* A5/4 algorithm */ #define A5_5 (0x4) /* A5/5 algorithm */ #define A5_6 (0x5) /* A5/6 algorithm */ #define A5_7 (0x6) /* A5/7 algorithm */ /* * Value constants for VAL_cause */ #define HO_COMPLETE (0x0) /* success */ #define HO_TIMEOUT (0x1) /* timeout */ /* * Value constants for VAL_nci */ #define HO_TA_OUT_IGNORED (0x0) /* timing advance out of range is ignored */ #define HO_TA_OUT_NOT_IGNORED (0x1) /* timing advance out of range is not ignored */ /* * Value constants for VAL_timing_advance_valid */ #define HO_TA_NOT_VALID (0x0) /* timing advance information is not valid */ #define HO_TA_VALID (0x1) /* timing advance information is valid */ /* * Value constants for VAL_dtx_used */ #define DTX_NOT_USED (0x0) /* DTX was not used */ #define DTX_USED (0x1) /* DTX was used */ /* * Value constants for VAL_meas_valid */ #define MEAS_ARE_NOT_VALID (0x0) /* measurement values are not valid */ #define MEAS_ARE_VALID (0x1) /* measurement values are valid */ /* * Value constants for VAL_bcch_freq */ /* * Value constants for VAL_sub_channel */ #define SUB_CH_0 (0x0) /* sub channel 0 */ #define SUB_CH_1 (0x1) /* sub channel 1 */ /* * Value constants for VAL_frame_erasure */ #define TCH_LOOP_A (0x0) /* TCH loop A */ #define TCH_LOOP_B (0x1) /* TCH loop B */ #define TCH_LOOP_C (0x2) /* TCH loop C */ #define TCH_LOOP_D (0x3) /* TCH loop D */ #define TCH_LOOP_E (0x4) /* TCH loop E */ #define TCH_LOOP_F (0x5) /* TCH loop F */ #define TCH_LOOP_I (0x6) /* TCH loop I */ /* * Value constants for VAL_tested_device */ #define DAI_NO_TEST (0x0) /* no test */ #define DAI_S_DEC (0x1) /* speech decoder */ #define DAI_S_COD (0x2) /* speech coder */ #define DAI_ACOUSTIC (0x4) /* acoustic tests */ /* * Value constants for VAL_sleep_mode */ #define NO_SLEEP (0x0) /* no sleep mode */ #define SMALL_SLEEP (0x1) /* small sleep mode */ #define BIG_SLEEP (0x2) /* big sleep mode */ #define DEEP_SLEEP (0x3) /* deep sleep mode */ #define ALL_SLEEP (0x4) /* all sleep modes */ /* * Value constants for VAL_Clocks */ #define CL_ARMIO (0x1) /* ARMIO_CLK */ #define CL_RIFR (0x2) /* RIF_CLKR */ #define CL_RIFX (0x4) /* RIF_CLKX */ #define CL_RIF13 (0x10) /* RIF_CLK13 */ #define CL_NCLK (0x20) /* UWIRE_CLK */ #define CL_SIM (0x40) /* SIM_CLK */ #define CL_TSP (0x80) /* TSP_CLK */ #define CL_TIMER (0x100) /* TIMER_CLK */ #define CL_TPU (0x200) /* TPU_CLK */ #define CL_UART (0x400) /* UART_CLK */ #define CL_SW_CLOCK (0x800) /* SWITCH_IRQ_CLK */ /* * Value constants for VAL_sb_flag */ #define NO_SB_FOUND (0x0) /* synchron burst not found (fn_offset, time_alignment and bsic are not valid) */ #define SB_FOUND (0x1) /* synchron burst found (fn_offset, time_alignment and bsic are valid */ /* * Value constants for VAL_gprs_prio */ #define GPRS_PRIO_TOP (0x0) /* Higher than serving cell */ #define GPRS_PRIO_HIGH (0x1) /* Higher than normal ncell bcch reading */ #define GPRS_PRIO_NORM (0x2) /* Normal */ /* * Value constants for VAL_radio_band_config */ #define STD_900 (0x1) /* GSM 900 */ #define STD_EGSM (0x2) /* extended GSM */ #define STD_1900 (0x3) /* PCS 1900 */ #define STD_1800 (0x4) /* DCS 1800 */ #define STD_DUAL (0x5) /* GSM 900 / DCS 1800 */ #define STD_DUAL_EGSM (0x6) /* extended GSM / DCS 1800 */ #define STD_850 (0x7) /* GSM 850 */ #define STD_DUAL_US (0x8) /* GSM 850 / PCS 1900 */ /* * Value constants for VAL_initial_codec_mode */ #define CODEC_MODE_1 (0x0) /* lowest codec mode */ #define CODEC_MODE_2 (0x1) /* second lowest mode */ #define CODEC_MODE_3 (0x2) /* third lowest mode */ #define CODEC_MODE_4 (0x3) /* highest mode */ /* * Value constants for VAL_eodt_data_valid */ #define EOTD_NOT_PRES (0x0) /* EOTD data not present */ #define EOTD_PRES (0x1) /* EOTD data present */ /* * Value constants for VAL_eotd */ #define NC_MON (0x0) /* neighbour cell monitoring */ #define EOTD_MON (0x1) /* EOTD monitoring */ /* * Value constants for VAL_mode */ #define MODE_IDLE (0x0) /* idle */ #define MODE_DEDIC (0x1) /* dedicated or packet transfer */ /* * user defined constants */ #define BA_LIST_SIZE (0x21) #define MAX_NCELL_EOTD_L1 (0xc) #define MAX_NCELL (0x6) #define MAX_CARRIERS (0x224) #define BCCH_LIST_SIZE (0x20) #define MAX_MEAS_VALUES (0x8) #define MAX_L2_FRAME_SIZE (0x17) #define MAX_MA_CARRIER (0x40) #define MAX_SCHED_SIZE (0xa) #define ADC_LIST_SIZE (0x5) #include "CDG_LEAVE.h" #endif