FreeCalypso > hg > fc-magnetite
view cdg-hybrid/msg/ss.mdf @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : ss.mdf ;*** Creation : Thu Jun 19 15:32:13 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : ss ;*** Document No. : 6147.601.97.104 ;*** Document Date : 2003-02-04 ;*** Document Status: BEING_PROCESSED ;*** Document Author: LG ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:21:24 2007" PRAGMA LAST_MODIFIED "2003-02-04" PRAGMA ID_AND_VERSION "6147.601.97.104" CONST L3MAX 251 ; maximum size of a L3 buffer CONST MAX_SS_VERSION 1 ; maximum length in SS version VALTAB VAL_ver VAL 0x00 SS_VERSION_PHASE2 "phase 2 service and error handling, ellipsis notation" VALTAB VAL_cs VAL 1 CAUSE_UNASSIGN "Unassigned (unallocated) Note 9 number" VAL 3 CAUSE_NO_ROUTE "No route to destination" VAL 6 CAUSE_CHAN_UNACCEPT "Channel unacceptable" VAL 8 CAUSE_BARRED "Operator determined barring" VAL 16 CAUSE_CALL_CLEAR "Normal call clearing" VAL 17 CAUSE_USER_BUSY "User busy" VAL 18 CAUSE_NO_RESPONSE "No user responding" VAL 19 CAUSE_ALERT_NO_ANSWER "User alerting, no answer" VAL 21 CAUSE_CALL_REJECT "Call rejected" VAL 22 CAUSE_NUM_CHANGED "Number changed" VAL 25 CAUSE_PREEMPTION "Pre-emption" VAL 26 CAUSE_USER_CLEAR "Non selected user clearing" VAL 27 CAUSE_DEST_ORDER "Destination out of order" VAL 28 CAUSE_NUM_FORMAT "Invalid number format (incomplete number)" VAL 29 CAUSE_FACILITY_REJECT "Facility rejected" VAL 30 CAUSE_STATUS_ENQUIRY "Response to STATUS ENQUIRY" VAL 31 CAUSE_UNSPECIFIED "Normal, unspecified" VAL 34 CAUSE_NO_CHAN_AVAIL "No circuit/channel available" VAL 38 CAUSE_NETWORK_ORDER "Network out of order" VAL 41 CAUSE_TEMP_FAIL "Temporary failure" VAL 42 CAUSE_SWITCH_CONGEST "Switching equipment congestion" VAL 43 CAUSE_INFO_DISCARD "Access information discarded" VAL 44 CAUSE_REQ_CHAN_UNAVAIL "requested circuit/channel not available" VAL 47 CAUSE_RESOURCE_UNAVAIL "Resources unavailable, unspecified" VAL 49 CAUSE_QOS_UNAVAIL "Quality of service unavailable" VAL 50 CAUSE_FACILITY_UNSUBSCRIB "Requested facility not subscribed" VAL 55 CAUSE_BARRED_IN_CUG "Incoming calls barred within the CUG" VAL 57 CAUSE_BEARER_CAP_AUTHORIZ "Bearer capability not authorized" VAL 58 CAUSE_BEARER_CAP_UNAVAIL "Bearer capability not presently available" VAL 63 CAUSE_SERVICE_UNAVAIL "Service or option not available, unspecified" VAL 65 CAUSE_BEARER_NOT_IMPLEM "Bearer service not implemented" VAL 68 CAUSE_ACM_MAX "ACM equal to or greater than ACMmax" VAL 69 CAUSE_FACILITY_NOT_IMPLEM "Requested facility not implemented" VAL 70 CAUSE_RESTICT_BEARER_CAP "Only restricted digital information bearer capability is available" VAL 79 CAUSE_SERVICE_NOT_IMPLEM "Service or option not implemented, unspecified" VAL 81 CAUSE_INVALID_TI "Invalid transaction identifier value" VAL 87 CAUSE_USER_NOT_IN_CUG "User not member of CUG" VAL 88 CAUSE_INCOMPAT_DEST "Incompatible destination" VAL 91 CAUSE_INVALID_TRANS_NET "Invalid transit network selection" VAL 95 CAUSE_INCORRECT_MESSAGE "Semantically incorrect message" VAL 96 CAUSE_INVALID_MAND_INFO "Invalid mandatory information" VAL 97 CAUSE_MESSAGE_TYPE_NOT_IMPLEM "Message type non-existent or not implemented" VAL 98 CAUSE_MESSAGE_TYPE_INCOMPAT "Message type not compatible with protocol state" VAL 99 CAUSE_INFO_ELEM_NOT_IMPLEM "Information element non existent or not implemented" VAL 100 CAUSE_COND_INFO_ELEM "Conditional IE error" VAL 101 CAUSE_MESSAGE_INCOMPAT "Message not compatible with protocol state" VAL 102 CAUSE_TIMER "Recovery on timer expiry" VAL 111 CAUSE_PROTOCOL "Protocol error, unspecified" VAL 127 CAUSE_INTERWORKING "Interworking, unspecified" VALTAB VAL_cs2 VAL 0 CS_Q931 "standardized coding as described in CCITT Rec. Q.931" VAL 1 CS_INTERNATIONAL "reserved for other international standards" VAL 2 CS_NATIONAL "national standard" VAL 3 CS_GSM_PLMN "standard defined for the GSM PLMNS as described in 10.86/GSM 04.08" VALTAB VAL_loc VAL DEF "reserved" VAL 0 LOC_USER "user" VAL 1 LOC_PRIV_NET_LOCAL_USER "private network serving the local user" VAL 2 LOC_PUB_NET_LOCAL_USER "public network serving the local user" VAL 3 LOC_TRANSIT_NET "transit network" VAL 4 LOC_PUB_NET_REMOTE_USER "public network serving the remote user" VAL 5 LOC_PRIV_NET_REMOTE_USER "private network serving the remote user" VAL 7 LOC_INTERNATIONAL_NET "international network" VAL 10 LOC_BEYOND_POINT "network beyond interworking point" VAR msg_type "Message Type" 8 VAR fac_info "Facility Information" 8 VAR ver "Version Content" 8 VAL @m_ss - VAL_ver@ VAR cs "Cause" 7 VAL @m_ss - VAL_cs@ VAR cs2 "Coding standard" 2 VAL @m_ss - VAL_cs2@ VAR loc "Location" 4 VAL @m_ss - VAL_loc@ VAR rec "Recommendation" 7 VAR diag "Diagnostics" 8 COMP ss_facility "SS facility" { fac_info [1..L3MAX] ; Facility Information } COMP ss_version "SS version" { ver [0.. MAX_SS_VERSION] ; ss version content } COMP ss_cause "Cause" { + cs2 ; Coding standard II .0 ; Spare - loc ; Location * rec ; Recommendation * cs ; Cause value diag [0..27] ; Diagnostics } MSG d_ss_facility downlink 0b00111010 ; SS Facility { GSM3_V msg_type ; Message Type GSM4_LV ss_facility ; SS facility } MSG u_ss_facility uplink 0b00111010 ; SS Facility { GSM3_V msg_type ; Message Type GSM4_LV ss_facility ; SS facility } MSG d_ss_register downlink 0b00111011 ; SS Register { GSM3_V msg_type ; Message Type GSM4_TLV ss_facility 0x1C ; SS facility } MSG u_ss_register uplink 0b00111011 ; SS Register { GSM3_V msg_type ; Message Type GSM4_TLV ss_facility 0x1C ; SS facility GSM4_TLV ss_version 0x7F ; SS version } MSG b_ss_rel_comp both 0b00101010 ; SS Release Complete { GSM3_V msg_type ; Message Type GSM4_TLV ss_cause 0x08 ; SS cause GSM4_TLV ss_facility 0x1C ; SS facility }