FreeCalypso > hg > fc-magnetite

view cdg3/cdginc-conservative/p_aci.val @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_aci.val                                                      |
| SOURCE  : "sap\aci.pdf"                                                  |
| LastModified : "2004-06-01"                                              |
| IdAndVersion : "8411.105.00.205"                                         |
| SrcFileTime  : "Thu Nov 29 09:29:50 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_ACI_VAL
#define P_ACI_VAL


#define CDG_ENTER__P_ACI_VAL

#define CDG_ENTER__FILENAME _P_ACI_VAL
#define CDG_ENTER__P_ACI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_ACI_VAL__LAST_MODIFIED _2004_06_01
#define CDG_ENTER__P_ACI_VAL__ID_AND_VERSION _8411_105_00_205

#define CDG_ENTER__P_ACI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_29_50_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_ACI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cmd_src
 */
#define CMD_SRC_INT                    (0x0)      /* Command from internal application */
#define CMD_SRC_EXT                    (0x1)      /* Command from external application */
#define CMD_SRC_UNKNOWN                (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_urt_stat
 */
#define URT_RDY_TO_SEND                (0x0)      /* URT is ready to accept new data */
#define URT_DATA_AVAIL                 (0x1)      /* URT has data available         */
#define URT_STAT_UNKNOWN               (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_cause
 */
#define ABT_ABORT_DATA                 (0x0)      /* Abort data mode                */
#define ABT_ABORT_CMD                  (0x1)      /* Abort current command          */

/*
 * Value constants for VAL_ackflg
 */
#define ACI_NAK                        (0x0)      /* Not Acknowledge                */
#define ACI_ACK                        (0x1)      /* Acknowledge                    */

/*
 * user defined constants
 */
#define MAX_CMD_LEN                    (0x17c)    
#define MAX_TRC_LEN                    (0x50)     
#define MAX_DATA_LEN                   (0xc8)     

#include "CDG_LEAVE.h"


#endif