FreeCalypso > hg > fc-magnetite

view cdg3/sap/rrgrr.sap @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents c15047b3d00d
children
line wrap: on
line source

<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with SAPE SAP Editor -->
<SAP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="sap.xsd">
    <DocInfoSection>
        <DocName DocType="SAP">rrgrr</DocName>
        <DocNum Number="112" Project="8441"/>
        <Description>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The Protocol Stacks are used to define the functionality of the GSM protocols for interfaces. The GSM specifications are normative when used to describe the functionality of interfaces, but the stacks and the subdivision of protocol layers does not imply or restrict any implementation.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The protocol stack for GPRS consists of several entities. Each entity has one ore more service access points, over which the entity provides a service for the upper entity.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">Figure 1-1: Architecture of the GSM/GPRS protocol stack</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The information units passed via the SAPs are called primitives and consists of an operation code and several parameters. See the Users Guide for details.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The entities of the GPRS protocol stack are:</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.1 GRR (RLC/MAC) - Radio Link Control/Medium Access Control</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">This layer contains two functions: The Radio Link Control function provides a radio-solution-dependent reliable link. The Medium Access Control function controls the access signalling (request and grant) procedures for the radio channel, and the mapping of LLC frames onto the GSM physical channel.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.2 LLC - Logical Link Control</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The LLC entity provides multiple highly reliable logical links for asynchronous data transfer between the MS and the network. It supports variable-length information frames, acknowledged and unacknowledged data transfer, flow and sequence control, error detection and recovery, notification of unrecoverable errors, user identity confidentiality, and ciphering of user and signaling data.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.3 GMM - GPRS Mobility Management</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The GMM entity provides procedures for the mobility of the MS, such as informing the network of its present location, and user identity confidentiality. It manages the GMM context (attach, detach, routing area updating), supports security functions such as authentication of user and MS, controls ciphering of data, and initiates the response to paging messages.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.4 SM - Session Management</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The main function of the session management (SM) is to support PDP context handling of the user terminal. Session Management activates, modifies and deletes the contexts for packet data protocols (PDP). Session Management services are provided at the SMREG-SAP and the SNSM-SAP for anonymous and non-anonymous access. The non-anonymous and anonymous access procedures for PDP context activation and PDP context deactivation are available at the SMREG-SAP. In addition there exists a PDP context modification for non-anonymous PDP contexts.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.5 SNDCP - Subnetwork Dependant Convergence Protocol</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">SNDCP carries out all functions related to transfer of Network layer Protocol Data Units (N-PDUs) over GPRS in a transparent way. SNDCP helps to improve channel efficiency by means of compression techniques. The set of protocol entities above SNDCP consists of commonly used network protocols. They all use the same SNDCP entity, which then performs multiplexing of data coming from different sources to be sent using the service provided by the LLC layer.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.6 GACI - GPRS Application Control Interface</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The GACI is the GPRS extension of the ACI. It is specified in GSM 07.07 and 07.60. It is responsible for processing of the GPRS related AT Commands to setup, activate and deactivate the PDP context parameter. It also provides functionality for the interworking between GMM/SM/SNDCP and a packet oriented protocol like PPP.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.7 USART - Universal Synchronous Asynchronous Receiver Transmitter Driver</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The USART is a hardware component that facilitates a connection between the mobile station and terminal equipment (e.g. a PC). This interface uses some of the circuits described in V.24.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The data exchange provided by this unit is serial and asynchronous (synchronous communication is not in the scope of this document). A driver that uses interrupts to manage a circular buffer for the sending and receiving direction is necessary in order to use this component in the GPRS. The driver has to be able to perform flow control.</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">1.8 TOM - Tunnelling of Messages</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The TOM entity is present if and only if HS136 is supported (the feature flag FF_HS136 is enabled).</XHTMLElement>
            </DocElement>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">The main function of TOM is to tunnel non-GSM signalling messages between the MS and the SGSN. The only non-GSM signalling which is currently supported by TOM is for the EGPRS-136 system (according to TIA/EIA-136-376). Data transfer in both uplink and downlink direction is possible. Two different priorities (high, low) of signalling data transfer are supported. TOM uses the unacknowledged mode of LLC and the acknowledged mode of GRR (RLC/MAC).</XHTMLElement>
            </DocElement>
        </Description>
        <DocHistory>
            <DocVersion Number="001" Year="99"/>
            <Date Day="16" Month="6" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Initial</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="002" Year="99"/>
            <Date Day="16" Month="6" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>RRGRR_PACKET_MEASUREMENT_ORDER_IND added</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="003" Year="99"/>
            <Date Day="21" Month="7" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>SI15 removed</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="004" Year="99"/>
            <Date Day="22" Month="7" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>RRGRR_RR_EST_REQ and pointer to data structures added.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="005" Year="99"/>
            <Date Day="6" Month="10" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>MS data structure added and pointer to data changed into SDU</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="006" Year="99"/>
            <Date Day="7" Month="10" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>RRGRR_STATE_IND changed to RRGRR_STATE_REQ; OpCodes changed; descriptions extended...</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="007" Year="99"/>
            <Date Day="12" Month="10" Year="1999"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>RRGRR_CELL_INFO_IND added</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="008" Year="99"/>
            <Date Day="14" Month="10" Year="1999"/>
            <Author>DB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Removed dummy parameter.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="009" Year="99"/>
            <Date Day="28" Month="2" Year="2000"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>RRGRR_SI_STATE_IND added; parameters for RRGRR_SI_READ_REQ added</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="010" Year="99"/>
            <Date Day="1" Month="3" Year="2000"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>RRGRR_ACCESS_CLASS_IND, RRGRR_RR_EST_RECEIVED_IND, RRGRR_RR_EST_REQ, RRGRR_RR_EST_ALLOWED_REQ added.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="011" Year="99"/>
            <Date Day="2" Month="6" Year="2000"/>
            <Author>SL</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Several changes due to packet access procedure over CCCH</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="012" Year="99"/>
            <Date Day="5" Month="7" Year="2000"/>
            <Author>ROZ</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>r_bit added for assignment prims</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="013" Year="99"/>
            <Date Day="5" Month="12" Year="2000"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Synchronisation to the serving/neighbour cell, cell reselection primitives etc.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="014" Year="99"/>
            <Date Day="27" Month="6" Year="2001"/>
            <Author>ID</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add lac in serving cell info</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="015" Year="99"/>
            <Date Day="20" Month="7" Year="2001"/>
            <Author>VK</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Introduce RRGRR_RESUMED_TBF_REQ, align format, use Condat AG</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="016" Year="99"/>
            <Date Day="22" Month="11" Year="2001"/>
            <Author>VK</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add GPRS Extended Measurement</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="017" Year="99"/>
            <Date Day="28" Month="3" Year="2002"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add BS_PA_MFRMS to serving cell info</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="018" Year="99"/>
            <Date Day="11" Month="4" Year="2002"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add information regarding the current location of the mobile equipment to the parameter serving cell information</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="019" Year="99"/>
            <Date Day="23" Month="4" Year="2002"/>
            <Author>ANS</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>rai in rrgrr_gprs_data_req added</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="020" Year="99"/>
            <Date Day="23" Month="4" Year="2002"/>
            <Author>RAS</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Merge from gprs_1.3.2 to g23m</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="021" Year="02"/>
            <Date Day="4" Month="6" Year="2002"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Remove RRGRR_MEAS_IND and any dependencies.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="022" Year="02"/>
            <Date Day="1" Month="7" Year="2002"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Remove primitives RRGRR_STOP_CHANNEL_REQUEST_REQ and RRGRR_STOP_CHANNEL_REQUEST_IND</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="023" Year="02"/>
            <Date Day="1" Month="7" Year="2002"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add constant REP_TYPE_RES</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="024" Year="02"/>
            <Date Day="21" Month="8" Year="2002"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add some references and constants in context with the interface for the GPRS extended measurements</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="025" Year="03"/>
            <Date Day="2" Month="1" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Rename ext_meas into xmeas</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="026" Year="03"/>
            <Date Day="13" Month="1" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Add/update references</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="027" Year="03"/>
            <Date Day="12" Month="3" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Rework of the GPRS Cell Selection parameters</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="028" Year="03"/>
            <Date Day="28" Month="4" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Remove ABORT_ACCESS</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="029" Year="03"/>
            <Date Day="7" Month="8" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND, remove RRGRR_STOP_ALL_ACTIVITIES and RRGRR_STOP_ALL_ACTIVITIES_CNF, update cell information structure.</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="030" Year="03"/>
            <Date Day="2" Month="9" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Remove RRGRR_SI_STATE_IND and RRGRR_UPDATED_SI_IND</Comment>
        </DocHistory>
        <DocHistory>
            <DocVersion Number="031" Year="03"/>
            <Date Day="19" Month="11" Year="2003"/>
            <Author>SAB</Author>
            <DocStatus State="BEING_PROCESSED"/>
            <Comment>Increase array size of measurement results for NC measurement reporting.</Comment>
        </DocHistory>
        <DocRef>
            <RefId>[1]</RefId>
            <RefTitle>GSM 05.02 version 8.0.0 Release 1999Digital cellular telecommunications system (Phase 2+);Multiplexing and multiple access on the radio path</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[2]</RefId>
            <RefTitle>GSM 04.60 version 6.3.0 Release 1997Digital cellular telecommunications system (Phase 2+);General Packet Radio Service (GPRS);Mobile Station (MS) - Base Station System (BSS) interface;Radio Link Control/ Medium Access Control (RLC/MAC) protocol</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[3]</RefId>
            <RefTitle>GSM 04.08 version 6.3.0 Release 1997Digital cellular telecommunications system (Phase 2+);Mobile radio interface layer 3 specification</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[4]</RefId>
            <RefTitle>GSM 03.64 version 6.1.0 Release 1997Digital cellular telecommunications system (Phase 2+);General Packet Radio Service (GPRS);Overall description of the GPRS radio interface; Stage 2</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[5]</RefId>
            <RefTitle>GSM 03.60 version 6.3.1 Release 1997Digital cellular telecommunications system (Phase 2+);General Packet Radio Service (GPRS);Service description; Stage 2</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[6]</RefId>
            <RefTitle>GSM 04.07 version 6.3.0 Release 1997Digital cellular telecommunications system (Phase 2+);Mobile radio interface signalling layer 3; General aspects</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[7]</RefId>
            <RefTitle>GSM 04.64 version 6.3.0 Release 1997Digital cellular telecommunications system (Phase 2+);General Packet Radio Service (GPRS);Mobile Station - Serving GPRS Support Node (MS-SGSN)Logical Link Control (LLC) layer specification</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[8]</RefId>
            <RefTitle>GSM 05.08 version 6.4.0 Release 1997Digital cellular telecommunications system (Phase 2+);Radio subsystem link control</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[9]</RefId>
            <RefTitle>GSM 05.10 version 6.3.0 Release 1997Digital cellular telecommunications system (Phase 2+);Radio subsystem synchronization</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[10]</RefId>
            <RefTitle>GSM 03.20 TS 100 929: July 1998 (GSM 03.20 version 6.0.1)Security related network functions, ETSI</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[11]</RefId>
            <RefTitle>Draft GSM 03.22: August 1998 (GSM 03.22 version 6.1.0)Functions related to Mobile Station (MS) in idle mode and group receive mode, ETSI</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[12]</RefId>
            <RefTitle>GSM 04.65 V6.3.0: Subnetwork Dependant Convergence Protocol ETSI, March 1999</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[13]</RefId>
            <RefTitle>ITU-T V42bis ITU-T, Recommendation V.42 bis 1990</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[14]</RefId>
            <RefTitle>GSM 09.60 GPRS Tunneling Protocol (GTP) across the Gn and Gp Interface</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[15]</RefId>
            <RefTitle>RFC 1661 IETF STD 51 July 1994The Point-to-Point Protocol (PPP)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[16]</RefId>
            <RefTitle>RFC 1662 IETF STD 51 July 1994PPP in HDLC-like Framing</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[17]</RefId>
            <RefTitle>RFC 1570 January 1994PPP LCP Extensions</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[18]</RefId>
            <RefTitle>RFC 1989 August 1996PPP Link Quality Monitoring</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[19]</RefId>
            <RefTitle>RFC 1332 May 1992The PPP Internet Protocol Control Protocol (IPCP)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[20]</RefId>
            <RefTitle>RFC 1877 December 1995PPP IPCP Extensions for Name Server Addresses</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[21]</RefId>
            <RefTitle>RFC 2153 May 1997PPP Vendor Extensions</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[22]</RefId>
            <RefTitle>RFC 1334 October 1992PPP Authentication Protocols (for Password Authentication Protocol only)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[23]</RefId>
            <RefTitle>RFC 1994 August 1996PPP Challenge Handshake Authentication Protocol (CHAP)</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[24]</RefId>
            <RefTitle>TIA/EIA-136-370Packet-Data Services - Enhanced General Packet Radio for TIA/EIA-136 (EGPRS-136) - Overview, Telecommunications Industry Association</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[25]</RefId>
            <RefTitle>TIA/EIA-136-376Packet-Data Services - EGPRS-136 Mobility Management, Telecommunications Industry Association</RefTitle>
        </DocRef>
        <DocRef>
            <RefId>[26]</RefId>
            <RefTitle>TIA/EIA-136-972Packet-Data Services - Stage 2 Description, Telecommunications Industry Association</RefTitle>
        </DocRef>
    </DocInfoSection>
    <ConstantsSection>
        <Description>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">This section contains all constants that are defined for the RRGRR SAP</XHTMLElement>
            </DocElement>
        </Description>
        <Constant>
            <Alias>RRGRR_MAX_ARFCN_NCELL_SYNC_REQ</Alias>
            <Value ValueType="DEC">12</Value>
            <Comment>maximum number of frequencies to be synchronised for cell re-selection and EOTD</Comment>
        </Constant>
        <Constant>
            <Alias>RRGRR_MAX_ARFCN_EXT_MEAS</Alias>
            <Value ValueType="DEC">64</Value>
            <Comment>maximum number of frequencies during Extended Measurement</Comment>
        </Constant>
        <Constant>
            <Alias>RRGRR_MEAS_REP_LIST_SIZE</Alias>
            <Value ValueType="DEC">7</Value>
            <Version>!REL99 OR !TI_PS_FF_EMR</Version>
            <Comment>Measurement report list size (1 serving and 6 neighbour cells)</Comment>
        </Constant>
        <Constant>
            <Alias>RRGRR_BA_LIST_SIZE</Alias>
            <Value ValueType="DEC">32</Value>
            <Comment>BA list size</Comment>
        </Constant>
        <Constant>
            <Alias>SIZE_MCC</Alias>
            <Value ValueType="DEC">3</Value>
            <Comment>maximum number of BCD digits of the mobile country code</Comment>
        </Constant>
        <Constant>
            <Alias>SIZE_MNC</Alias>
            <Value ValueType="DEC">3</Value>
            <Comment>maximum number of BCD digits of the mobile network code</Comment>
        </Constant>
        <Constant>
            <Alias>RRGRR_MAX_RSLT_NCELL_SYNC_IND</Alias>
            <Value ValueType="DEC">12</Value>
            <Version>REL99 AND TI_PS_FF_EMR</Version>
            <Comment>maximum number of results of synchronisation attempts for cell re-selection</Comment>
        </Constant>
        <Constant>
            <Alias>RRGRR_MAX_RSLT_NCELL_SYNC_IND</Alias>
            <Value ValueType="DEC">6</Value>
            <Version>!REL99 OR !TI_PS_FF_EMR</Version>
            <Comment>maximum number of results of synchronisation attempts for cell re-selection</Comment>
        </Constant>
        <Constant>
            <Alias>RRGRR_MEAS_REP_LIST_SIZE</Alias>
            <Value ValueType="DEC">33</Value>
            <Version>REL99 AND TI_PS_FF_EMR</Version>
            <Comment>Measurement report list size (1 serving and 32 neighbour cells)</Comment>
        </Constant>
        <Constant>
            <Alias>MAX_NUM_OF_RTD_VALUES</Alias>
            <Value ValueType="DEC">3</Value>
            <Comment>Maximum number of RTD values for an ARFCN</Comment>
        </Constant>
        <History>
            <Date Day="18" Month="6" Year="1999"/>
            <Author>ID</Author>
            <Comment>Initial</Comment>
        </History>
        <History>
            <Date Day="2" Month="2" Year="2001"/>
            <Author>SAB</Author>
            <Comment>Add RRGRR_MAX_ARFCN_FOR_BSIC</Comment>
        </History>
        <History>
            <Date Day="1" Month="4" Year="2001"/>
            <Author>MPA</Author>
            <Comment>Add BA_LIST_SIZE</Comment>
        </History>
        <History>
            <Date Day="24" Month="1" Year="2002"/>
            <Author>SAB</Author>
            <Comment>Add RRGRR_MEAS_REP_LIST_SIZE</Comment>
        </History>
        <History>
            <Date Day="23" Month="4" Year="2002"/>
            <Author>ANS</Author>
            <Comment>SIZE_MCC and SIZE_MNC included</Comment>
        </History>
        <History>
            <Date Day="4" Month="11" Year="2002"/>
            <Author>SAB</Author>
            <Comment>RRGRR_MAX_ARFCN_NCELL_SYNC_REQ and RRGRR_MAX_RSLT_NCELL_SYNC_IND included, RRGRR_MAX_ARFCN_FOR_BSIC removed</Comment>
        </History>
        <History>
            <Date Day="19" Month="11" Year="2003"/>
            <Author>SAB</Author>
            <Comment>Increase RRGRR_MEAS_REP_LIST_SIZE</Comment>
        </History>
    </ConstantsSection>
    <PrimitivesSection PrimIDType="BIT16" SAPid="45">
        <Description>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION"> This section contains all primitives that are defined for the RRGRR SAP</XHTMLElement>
            </DocElement>
        </Description>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates whether GPRS service is supported in the serving cell and/or that the SI13 was received.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_GPRS_SI13_IND</Name>
                <PrimID Direction="DOWNLINK" Number="0"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cause</Name>
                </ItemLink>
                <Comment>Cause</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>si_states</Name>
                </ItemLink>
                <Comment>State of SI</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>serving_cell_info</Name>
                </ItemLink>
                <Comment>Cell information</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sdu</Name>
                </ItemLink>
                <Comment>Sdu to SI13 message</Comment>
            </PrimItem>
            <History>
                <Date Day="16" Month="6" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="25" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>read_in and cr_par added. These parameters are needed in case of cell reselection procedure</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add cell information</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Remove parameter &lt;cr_par&gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that the packet paging request was received. This information is in paging request type 1,2 or 3. This primitive indicates whether the paging type was IMSI or P-TMSI (GPRS TMSI).</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_PACKET_PAGING_IND</Name>
                <PrimID Direction="DOWNLINK" Number="2"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>pg_type</Name>
                </ItemLink>
                <Comment>Paging type</Comment>
            </PrimItem>
            <History>
                <Date Day="21" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="20" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Primitive name changed to RRGRR_PACKET_PAGING_REQUEST</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR to send a channel request.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_CHANNEL_REQ</Name>
                <PrimID Direction="UPLINK" Number="0"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>req_data</Name>
                </ItemLink>
                <Comment>Channel Request Data</Comment>
            </PrimItem>
            <History>
                <Date Day="21" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that the IMMEDIATE_ASSIGNMENT (IA) was received.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_IA_IND</Name>
                <PrimID Direction="DOWNLINK" Number="3"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>fn</Name>
                </ItemLink>
                <Comment>Frame Number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>r_bit</Name>
                </ItemLink>
                <Comment>Retry Bit</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sdu</Name>
                </ItemLink>
                <Comment>Sdu to message</Comment>
            </PrimItem>
            <History>
                <Date Day="21" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that the IMMEDIATE_ASSIGNMENT EXTENDED was received.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_IAEXT_IND</Name>
                <PrimID Direction="DOWNLINK" Number="4"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ia_index</Name>
                </ItemLink>
                <Comment>Index of IA</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>fn</Name>
                </ItemLink>
                <Comment>Frame Number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>r_bit</Name>
                </ItemLink>
                <Comment>Retry Bit</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sdu</Name>
                </ItemLink>
                <Comment>Sdu to message</Comment>
            </PrimItem>
            <History>
                <Date Day="21" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that the ASSIGNMENT REJECT was received..</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_ASSIGNMENT_REJ_IND</Name>
                <PrimID Direction="DOWNLINK" Number="5"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>wait_ind</Name>
                </ItemLink>
                <Comment>wait indication</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>r_bit</Name>
                </ItemLink>
                <Comment>Retry Bit</Comment>
            </PrimItem>
            <History>
                <Date Day="17" Month="6" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>DB</Author>
                <Comment>Removed dummy parameter.</Comment>
            </History>
            <History>
                <Date Day="2" Month="5" Year="2000"/>
                <Author>ID</Author>
                <Comment>SDU added</Comment>
            </History>
            <History>
                <Date Day="31" Month="5" Year="2000"/>
                <Author>SL</Author>
                <Comment>SDU removed; wait indication added</Comment>
            </History>
            <History>
                <Date Day="5" Month="7" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Retry Bit added</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that a CTRL Message on DCCH for RR was received.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_DATA_IND</Name>
                <PrimID Direction="DOWNLINK" Number="6"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>fn</Name>
                </ItemLink>
                <Comment>Frame Number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sdu</Name>
                </ItemLink>
                <Comment>Sdu to message</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR to send a ctrl Block on DCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_DATA_REQ</Name>
                <PrimID Direction="UPLINK" Number="2"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sdu</Name>
                </ItemLink>
                <Comment>Sdu to message</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that an IA for downlink assignment was received.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_IA_DOWNLINK_IND</Name>
                <PrimID Direction="DOWNLINK" Number="8"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>fn</Name>
                </ItemLink>
                <Comment>Frame Number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>r_bit</Name>
                </ItemLink>
                <Comment>Retry Bit</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sdu</Name>
                </ItemLink>
                <Comment>Sdu to message</Comment>
            </PrimItem>
            <History>
                <Date Day="21" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR that the monitoring of CCCH should be started. The parameter indicates if a GMM procedure(GPRS Attach) is active where DRX mode is not allowed.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_START_MON_CCCH_REQ</Name>
                <PrimID Direction="UPLINK" Number="3"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>pag_mode</Name>
                </ItemLink>
                <Comment>Paging Mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>split_pg</Name>
                </ItemLink>
                <Comment>Split paging cycle</Comment>
            </PrimItem>
            <History>
                <Date Day="17" Month="6" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>DB</Author>
                <Comment>Removed dummy parameter.</Comment>
            </History>
            <History>
                <Date Day="10" Month="5" Year="2001"/>
                <Author>Can</Author>
                <Comment>Add pag_mode.</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR that the monitoring of CCCH should be stopped. This is only a signal, no parameters needed.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_STOP_MON_CCCH_REQ</Name>
                <PrimID Direction="UPLINK" Number="4"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>is_pbcch_present</Name>
                </ItemLink>
                <Comment>PBCCH indicator</Comment>
            </PrimItem>
            <History>
                <Date Day="17" Month="6" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>DB</Author>
                <Comment>Removed dummy parameter.</Comment>
            </History>
            <History>
                <Date Day="12" Month="7" Year="2001"/>
                <Author>ID</Author>
                <Comment>add is_pbcch_present</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR that a new cell should be selected.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_CR_REQ</Name>
                <PrimID Direction="UPLINK" Number="5"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cr_type</Name>
                </ItemLink>
                <Comment>Cell re-selection mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>channel number</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>bsic</Comment>
            </PrimItem>
            <History>
                <Date Day="21" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="25" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>replace sdu with parameters</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>Change the name of the primitive</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR to read SI. This primitive contains the parameter which indicates to the SI to read on BCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_START_MON_BCCH_REQ</Name>
                <PrimID Direction="UPLINK" Number="6"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>si_to_read</Name>
                </ItemLink>
                <Comment>SI to read</Comment>
            </PrimItem>
            <History>
                <Date Day="17" Month="6" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>DB</Author>
                <Comment>Removed dummy parameter.</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR a RR connection establishment was received on paging channel (PCCCH or PACCH). RR has to start RR connection as if it has received a connection establishment on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RR_EST_REQ</Name>
                <PrimID Direction="UPLINK" Number="7"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>non_gprs</Name>
                </ItemLink>
                <Comment>Non-GPRS parameters</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ch_needed</Name>
                </ItemLink>
                <Comment>Channel needed field</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ident_type</Name>
                </ItemLink>
                <Comment>Identity Type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>emlpp_prio</Name>
                </ItemLink>
                <Comment>eMLPP_PRIORITY</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>susp_req</Name>
                </ItemLink>
                <Comment>GPRS Suspension request</Comment>
            </PrimItem>
            <History>
                <Date Day="22" Month="7" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>DB</Author>
                <Comment>Removed dummy parameter.</Comment>
            </History>
            <History>
                <Date Day="20" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>GPRS suspension request added</Comment>
            </History>
            <History>
                <Date Day="8" Month="10" Year="2001"/>
                <Author>MPA</Author>
                <Comment>add identity type</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the RR whether an establishment of RR connection is allowed or not. This primitive is an answer to the RRGRR_RR_EST_IND primitive.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RR_EST_RSP</Name>
                <PrimID Direction="UPLINK" Number="8"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rr_est</Name>
                </ItemLink>
                <Comment>RR establishment allowence</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>susp_req</Name>
                </ItemLink>
                <Comment>GPRS Suspension request</Comment>
            </PrimItem>
            <History>
                <Date Day="1" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="25" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>_REQ changed to _RSP.</Comment>
            </History>
            <History>
                <Date Day="25" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>GPRS Supsension Request added</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to the GRR that an RR connection establishment was received from the network via paging. It is only a trigger.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RR_EST_IND</Name>
                <PrimID Direction="DOWNLINK" Number="13"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="29" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="29" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>This primitive can be received in all stages, not only in packet access procedure. Name of the primitive changed to ..._RR_EST_IND.</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive activates RR. RR acts as if the MS is only GSM service mobile. Monitor CCCH and BCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_ACTIVATE_REQ</Name>
                <PrimID Direction="UPLINK" Number="10"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>non_gprs</Name>
                </ItemLink>
                <Comment>Non-GPRS parameters</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>susp_req</Name>
                </ItemLink>
                <Comment>GPRS Suspension request</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rac</Name>
                </ItemLink>
                <Comment>Routing area code</Comment>
            </PrimItem>
            <History>
                <Date Day="28" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="2" Month="5" Year="2000"/>
                <Author>ID</Author>
                <Comment>non_gprs added, susp_req added</Comment>
            </History>
            <History>
                <Date Day="3" Month="7" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add RAC</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is used by GRR to provide RR with GPRS specific data.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_GPRS_DATA_REQ</Name>
                <PrimID Direction="UPLINK" Number="12"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>old_ptmsi</Name>
                </ItemLink>
                <Comment>Packet TMSI</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>new_ptmsi</Name>
                </ItemLink>
                <Comment>Packet TMSI</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>tlli</Name>
                </ItemLink>
                <Comment>TLLI</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>p_chan_req_des</Name>
                </ItemLink>
                <Comment>Packet Channel Request Description</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_meas_results</Name>
                </ItemLink>
                <Comment>GPRS Measurement Results</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>mac_req</Name>
                </ItemLink>
                <Comment>MAC Mode Requested</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cs_req</Name>
                </ItemLink>
                <Comment>Channel Coding Scheme Requested</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rai</Name>
                </ItemLink>
                <Comment>Last valid routing area identifier</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="9" Year="2000"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Elements for Packet Access Procedure on DCCH inserted</Comment>
            </History>
            <History>
                <Date Day="3" Month="3" Year="2003"/>
                <Author>ID</Author>
                <Comment>add cand_ptmsi</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is used by GRR to order RR to stop the dedicated channel. It is only a trigger.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_SUSPEND_DCCH_REQ</Name>
                <PrimID Direction="UPLINK" Number="13"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to GRR that RR has stopped the dedicated channel. It is only a trigger.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_SUSPEND_DCCH_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="16"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="26" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is used by GRR to order RR to reactivate the 'old' dedicated channel.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RECONNECT_DCCH_REQ</Name>
                <PrimID Direction="UPLINK" Number="14"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>reconn_cause</Name>
                </ItemLink>
                <Comment>why can't the procedure continue; ref to ASSIGNMENT FAILURE message</Comment>
            </PrimItem>
            <History>
                <Date Day="25" Month="7" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to GRR that RR has reactivated the 'old' dedicated channel.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RECONNECT_DCCH_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="17"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>reconn_state</Name>
                </ItemLink>
                <Comment>result of the reconnection procedure; may indicate Lower Layer Failure</Comment>
            </PrimItem>
            <History>
                <Date Day="25" Month="7" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to RR the successful establishment of a TBF at GRR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RESUMED_TBF_REQ</Name>
                <PrimID Direction="UPLINK" Number="1"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="20" Month="7" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to GRR the successful release of the DCCH at RR (after TFB establishment at GRR).</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_RESUMED_TBF_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="7"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="20" Month="7" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to GRR that RR has stopped the DCCH activities.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_STOP_DCCH_IND</Name>
                <PrimID Direction="DOWNLINK" Number="18"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>stop_cause</Name>
                </ItemLink>
                <Comment>Stop Cause</Comment>
            </PrimItem>
            <History>
                <Date Day="16" Month="10" Year="2000"/>
                <Author>LE</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Cell Reselection procedure has been started on RR side</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_CR_IND</Name>
                <PrimID Direction="DOWNLINK" Number="19"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cr_type</Name>
                </ItemLink>
                <Comment>Cell re-selection mode</Comment>
            </PrimItem>
            <History>
                <Date Day="13" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="18" Month="3" Year="2002"/>
                <Author>ID</Author>
                <Comment>MPA add cr_type</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is used to request the synchronisation of up to six neighbour cells for cell re-selection and additional six neighbour cells for EOTD. The list of channel numbers contains the strongest neighbour cells according to the BA(GPRS) list. Any change in that list will be indicated to RR by an additional RRGRR_NCELL_SYNC_REQ. The constant value RRGRR_INVALID_ARFCN is used to mark the end of the list in case it contains less entries than the maximum.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_NCELL_SYNC_REQ</Name>
                <PrimID Direction="UPLINK" Number="15"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Control>[RRGRR_MAX_ARFCN_NCELL_SYNC_REQ]</Control>
                <Version>!TI_PS_FF_RTD</Version>
                <Comment>List of Channel Numbers</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sync_type</Name>
                </ItemLink>
                <Comment>Primitive Item</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ncell_sync_list</Name>
                </ItemLink>
                <Control>[RRGRR_MAX_ARFCN_NCELL_SYNC_REQ]</Control>
                <Version>REL99 AND TI_PS_FF_RTD</Version>
                <Comment>List of neighbourcell that needs to be synchronised.</Comment>
            </PrimItem>
            <History>
                <Date Day="4" Month="11" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">For every neighbour cell in the RRGRR_NCELL_SYNC_REQ the entity RR attempts to synchronise to it and to decode the BSIC. As soon as the synchronisation results for those neighbour cells which are used for cell re-selection are available RR will send it using the primitive RRGRR_NCELL_SYNC_IND. The indication may contain as many results as requested by RRGRR_NCELL_SYNC_REQ or less depending of the synchronisation algorithm applied in RR. That's why RR may send more than one indication to forward every result to GRR. Re-attempts for synchronisation will be managed by RR autonomously. Any change in synchronisation status will be indicated without request from GRR side. The constant value RRGRR_INVALID_ARFCN is used to mark the end of the list in case it contains less entries than the maximum.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_NCELL_SYNC_IND</Name>
                <PrimID Direction="DOWNLINK" Number="21"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sync_result</Name>
                </ItemLink>
                <Control>[RRGRR_MAX_RSLT_NCELL_SYNC_IND]</Control>
                <Comment>Results of Neighbour Cell Synchronisation</Comment>
            </PrimItem>
            <History>
                <Date Day="4" Month="11" Year="2000"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is used for synchronisation to a given frequency. For example, if we have new PBCCH, so we have to first of all synchronise the MS to the give frequency of PBCCH before starting reading process of PBCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_SYNC_REQ</Name>
                <PrimID Direction="UPLINK" Number="16"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>Frequency</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>Bsic</Comment>
            </PrimItem>
            <History>
                <Date Day="10" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="24" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>cell_type added</Comment>
            </History>
            <History>
                <Date Day="27" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>fn_offset and time_alignment added</Comment>
            </History>
            <History>
                <Date Day="30" Month="8" Year="2002"/>
                <Author>SAB</Author>
                <Comment>parts of the description removed</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is indicates whether synchronisation was successfully or not.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_SYNC_IND</Name>
                <PrimID Direction="DOWNLINK" Number="22"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sync_res</Name>
                </ItemLink>
                <Comment>Synchronisation Result</Comment>
            </PrimItem>
            <History>
                <Date Day="10" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="24" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>cell_type added</Comment>
            </History>
            <History>
                <Date Day="30" Month="8" Year="2002"/>
                <Author>SAB</Author>
                <Comment>cell_type removed</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive updates the BA list in RR after GRR has received a PMO/PCO.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_UPDATE_BA_REQ</Name>
                <PrimID Direction="UPLINK" Number="18"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cell_type</Name>
                </ItemLink>
                <Comment>cell type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>nc_mode</Name>
                </ItemLink>
                <Comment>NC mode</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>add_freq_list</Name>
                </ItemLink>
                <Control>[RRGRR_BA_LIST_SIZE]</Control>
                <Comment>ba list added</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rm_freq_list</Name>
                </ItemLink>
                <Control>[RRGRR_BA_LIST_SIZE]</Control>
                <Comment>ba list removed</Comment>
            </PrimItem>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="24" Month="4" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Replace literal '32' by constant 'RRGRR_BA_LIST_SIZE'</Comment>
            </History>
            <History>
                <Date Day="17" Month="5" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Change type of rm_freq_list from UBYTE to STRUCT</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive requests the results of the measurements ordered by the network.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_MEAS_REP_REQ</Name>
                <PrimID Direction="UPLINK" Number="19"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>meas_cause</Name>
                </ItemLink>
                <Comment>measurement repot</Comment>
            </PrimItem>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive contains the results of the measurements ordered by the network. The first reported cell is the serving cell, subsequent cells are neighbor cells.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_MEAS_REP_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="23"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>meas_res</Name>
                </ItemLink>
                <Control>[RRGRR_MEAS_REP_LIST_SIZE]</Control>
                <Comment>meas report</Comment>
            </PrimItem>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="24" Month="1" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Change size of array</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to GRR that RR has succesfully established the TBF.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_TBF_ESTABLISHED_REQ</Name>
                <PrimID Direction="UPLINK" Number="20"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates to RR to start the CR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_CR_RSP</Name>
                <PrimID Direction="UPLINK" Number="21"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive indicates MS identities to GRR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_MS_ID_IND</Name>
                <PrimID Direction="DOWNLINK" Number="25"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>tmsi</Name>
                </ItemLink>
                <Comment>T M S I</Comment>
            </PrimItem>
            <History>
                <Date Day="5" Month="11" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_EXT_MEAS_REQ is used to initiate the Extended Measurement procedure according to 3GPP TS 04.60, section 5.6.2 and 3GPP TS 05.08, section 10.1.5.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_EXT_MEAS_REQ</Name>
                <PrimID Direction="UPLINK" Number="22"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn_idx</Name>
                </ItemLink>
                <Control>[1..RRGRR_MAX_ARFCN_EXT_MEAS]</Control>
                <Comment>Frequency Channel Numbers</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>call_ref</Name>
                </ItemLink>
                <Comment>Call reference ID</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>report_type</Name>
                </ItemLink>
                <Comment>Reporting type</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ncc_permitted</Name>
                </ItemLink>
                <Comment>Permitted cells indication</Comment>
            </PrimItem>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_EXT_MEAS_CNF is used to signal the result of the Extended Measurement procedure.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_EXT_MEAS_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="10"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>xmeas_res</Name>
                </ItemLink>
                <Control>[0..RRGRR_MAX_ARFCN_EXT_MEAS]</Control>
                <Comment>Frequency Channel Numbers; array length = 0 if procedure was stopped</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>call_ref</Name>
                </ItemLink>
                <Comment>Call reference ID</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>xmeas_cause</Name>
                </ItemLink>
                <Comment>Result state</Comment>
            </PrimItem>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="3" Month="7" Year="2002"/>
                <Author>VK</Author>
                <Comment>rename ext_meas into xmeas</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_EXT_MEAS_STOP_REQ is used to stop the Extended Measurement procedure.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_EXT_MEAS_STOP_REQ</Name>
                <PrimID Direction="UPLINK" Number="23"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_STOP_TASK_REQ primitive is used to stop a specific task of the RR entity. The task is specified as parameter of the primitive.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_STOP_TASK_REQ</Name>
                <PrimID Direction="UPLINK" Number="24"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>task</Name>
                </ItemLink>
                <Comment>Task</Comment>
            </PrimItem>
            <History>
                <Date Day="17" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_STOP_TASK_CNF primitive is used to confirm that a specific task of the RR entity is stopped. The task is specified as parameter of the RRGRR_STOP_TASK_REQ primitive.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_STOP_TASK_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="9"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="17" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_START_TASK_REQ primitive is used to stop a specific task of the RR entity. The task is specified as parameter of the primitive.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_START_TASK_REQ</Name>
                <PrimID Direction="UPLINK" Number="25"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>state</Name>
                </ItemLink>
                <Comment>State</Comment>
            </PrimItem>
            <History>
                <Date Day="12" Month="6" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_START_TASK_CNF primitive is used to confirm that a specific task of the RR entity is stopped. The task is specified as parameter of the RRGRR_STOP_TASK_REQ primitive.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_START_TASK_CNF</Name>
                <PrimID Direction="DOWNLINK" Number="26"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="12" Month="6" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_STANDBY_STATE_IND primitive is to indicate the entering of standby state.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_STANDBY_STATE_IND</Name>
                <PrimID Direction="UPLINK" Number="26"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="12" Month="6" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="3" Month="7" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Primitive renamed</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The RRGRR_READY_STATE_IND primitive is to indicate the entering of ready state.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_READY_STATE_IND</Name>
                <PrimID Direction="UPLINK" Number="27"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
            </PrimDef>
            <History>
                <Date Day="3" Month="7" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">RRGRR_CBCH_INFO_IND : This primitive is for passing CBCH configuration received in PSI 8 message to RR. RR will configure L1 with this information. PSI 8 is a R99 message. This primitive would be sent from GRR to RR only when the following conditions are satisfied : 1. mobile is in R99 cell. 2. PBCCH is present in the cell.</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">If PSI 8 is not broadcast in an R99 network, or if none of the instances of PSI 8 have CBCH info, then absence of CBCH would be indicated in this primitive.</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive will not be sent to RR in a R97 network. </XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_CBCH_INFO_IND</Name>
                <PrimID Direction="UPLINK" Number="28"/>
                <PrimUsage>
                    <Sender>GRR</Sender>
                    <Receiver>RR</Receiver>
                </PrimUsage>
                <Version>REL99</Version>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mph</DocName>
                    <Name>cbch</Name>
                </ItemLink>
                <Comment>cell broadcast channel information.</Comment>
            </PrimItem>
            <History>
                <Date Day="22" Month="01" Year="2007"/>
                <Author>x0017708</Author>
                <Comment>added as part of "CBCH config on PBCCH" feature.</Comment>
            </History>
        </Primitive>
        <Primitive>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This primitive is sent by RR to indicate enhanced measurement parameters to GRR. These parameters are received by RR in SI-2quater.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimDef>
                <Name>RRGRR_SI2QUATER_IND</Name>
                <PrimID Direction="DOWNLINK" Number="27"/>
                <PrimUsage>
                    <Sender>RR</Sender>
                    <Receiver>GRR</Receiver>
                </PrimUsage>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
            </PrimDef>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mph</DocName>
                    <Name>rep_type</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Primitive Item</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">mph</DocName>
                    <Name>enh_para_struct</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Primitive Item</Comment>
            </PrimItem>
            <PrimItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>nc_para_struct</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Primitive Item</Comment>
            </PrimItem>
            <History>
                <Date Day="23" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>Initial</Comment>
            </History>
        </Primitive>
    </PrimitivesSection>
    <PrimStructElementsSection>
        <Description>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">Parameters shall be part of the primitives described above and if applied the parameters shall contain the values specified here. These values are selected to correspond to element values used in the air interface protocol.</XHTMLElement>
            </DocElement>
        </Description>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains serving cell information.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>serving_cell_info</Name>
                <Comment>Cell information</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_rxlev_access_min</Name>
                </ItemLink>
                <Comment>GPRS_RXLEV_ACCESS_MIN</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_ms_txpwr_max_cch</Name>
                </ItemLink>
                <Comment>GPRS_MS_TXPWR_MAX_CCH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bcch_arfcn</Name>
                </ItemLink>
                <Comment>Frequency of BCCH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bcch_bsic</Name>
                </ItemLink>
                <Comment>BSIC of BCCH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ac_class</Name>
                </ItemLink>
                <Comment>Access class for RACH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>pwr_offset</Name>
                </ItemLink>
                <Comment>Power offset</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rr_cell_env</Name>
                </ItemLink>
                <Comment>Cell Environment</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>limited</Name>
                </ItemLink>
                <Comment>Limited service</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bs_pa_mfrms</Name>
                </ItemLink>
                <Comment>BS_PA_MFRMS</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Control>[RRGRR_BA_LIST_SIZE]</Control>
                <Comment>BA List</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ba_ind</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>BA-IND of the BA(BCCH)</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="12" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Frequency of BCCH added</Comment>
            </History>
            <History>
                <Date Day="31" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Access class for RACH added</Comment>
            </History>
            <History>
                <Date Day="30" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Power offset added</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>add plmn and la forbidden</Comment>
            </History>
            <History>
                <Date Day="27" Month="6" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add lac</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add bcch_bsic</Comment>
            </History>
            <History>
                <Date Day="17" Month="1" Year="2002"/>
                <Author>ID</Author>
                <Comment>add limited</Comment>
            </History>
            <History>
                <Date Day="25" Month="3" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add bs_pa_mfrms</Comment>
            </History>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add parameter rr_cell_env, remove parameter lac</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Add parameter &lt;gprs_rxlev_access_min&gt;, rename parameter &lt;ms_txpwr_max_ccch&gt; to &lt;gprs_ms_txpwr_max_cch&gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND - add parameter BA list, remove la_forb and plmn_forb</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains a service data unit.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>sdu</Name>
                <Comment>service data unit</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>l_buf</Name>
                </ItemLink>
                <Comment>length of content in bit</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>o_buf</Name>
                </ItemLink>
                <Comment>offset of content in bit</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>buf</Name>
                </ItemLink>
                <Control>[1]</Control>
                <Comment>buffer content</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="6" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains states of the SI.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>si_states</Name>
                <Comment>States of the SI</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>si1_state</Name>
                </ItemLink>
                <Comment>State of SI1</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>si3_state</Name>
                </ItemLink>
                <Comment>State of SI3</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>si13_state</Name>
                </ItemLink>
                <Comment>State of SI13</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="28" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>non_gprs</Name>
                <Comment>Non-GPRS parameters</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_non_gprs</Name>
                </ItemLink>
                <Comment>Valid flag for non GPRS</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>att</Name>
                </ItemLink>
                <Comment>Attach/detach allowed</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_T3212</Name>
                </ItemLink>
                <Comment>Valid flag for T3212</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>T3212</Name>
                </ItemLink>
                <Comment>T3212 value</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>neci</Name>
                </ItemLink>
                <Comment>Half rate support</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>pwrc</Name>
                </ItemLink>
                <Comment>Power control indicator</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>dtx</Name>
                </ItemLink>
                <Comment>DTX indicator</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>radio_link_timeout</Name>
                </ItemLink>
                <Comment>Supervisory timer for RR connection</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bs_ag_blks_res</Name>
                </ItemLink>
                <Comment>Number of blocks reserved for access grant</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ccch_conf</Name>
                </ItemLink>
                <Comment>Physical channel configuration for CCCH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bs_pa_mfrms</Name>
                </ItemLink>
                <Comment>51 MFs between paging</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>max_retrans</Name>
                </ItemLink>
                <Comment>Maximum number of retransmissions</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>tx_integer</Name>
                </ItemLink>
                <Comment>Number of slots to spread transmission</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ec</Name>
                </ItemLink>
                <Comment>Emergency call allowed</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_ms_txpwr_max_cch</Name>
                </ItemLink>
                <Comment>GPRS_MS_TXPWR_MAX_CCH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ecsc</Name>
                </ItemLink>
                <Version>REL99</Version>
                <Comment>Early Classmark sending flag in PSI2</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &lt;ms_txpwr_max_ccch&gt; to &lt;gprs_ms_txpwr_max_cch&gt;</Comment>
            </History>
            <History>
                <Date Day="20" Month="04" Year="2006"/>
                <Author>xparapgu</Author>
                <Comment>Added ECSC parameter</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains possible future extension IE.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>ext_ie</Name>
                <Comment>Possible future extension</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>ext_len</Name>
                </ItemLink>
                <Comment>Extension length</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>spare_bit</Name>
                </ItemLink>
                <Control>[8]</Control>
                <Comment>Spare bit (val(ext_len)+1)</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The optional eMLPP_PRIORITY field relates to a Mobile Station Identity and may only be present when the page relates to a paging request to trigger RR connection establishment. The eMLPP_PRIORITY field is coded as the Priority field defined in the P1 Rest Octets information element in GSM 04.08.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>emlpp_prio</Name>
                <Comment>eMLPP_PRIORITY</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_emlpp</Name>
                </ItemLink>
                <Comment>Valid flag</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>emlpp</Name>
                </ItemLink>
                <Comment>Value of emlpp_prio</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="18" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>p_chan_req_des</Name>
                <Comment>Requested channel characteristics</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>mo_mt</Name>
                </ItemLink>
                <Comment>MO/MT FALG</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>prio</Name>
                </ItemLink>
                <Comment>Priority</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rlc_mode_req</Name>
                </ItemLink>
                <Comment>RLC Mode</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>llc_type</Name>
                </ItemLink>
                <Comment>LLC Frame Type</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>req_bwd</Name>
                </ItemLink>
                <Comment>Requested Bandwidth</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rlc_octets</Name>
                </ItemLink>
                <Comment>RLC Octet Count</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the results of the GPRS-specific measurements by the MS. This IE is only used</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>gprs_meas_results</Name>
                <Comment>GPRS Measurement Results</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>c_value</Name>
                </ItemLink>
                <Comment>C_Value</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rxqual</Name>
                </ItemLink>
                <Comment>Rx Quality</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sign_var</Name>
                </ItemLink>
                <Comment>Signal Variance</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Result structure of synchronisation request.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>sync_result</Name>
                <Comment>Results of Synchronisation Attempts</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>Channel Number</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>sb_flag</Name>
                </ItemLink>
                <Comment>Error Cause</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>Base Station Identity Code</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="6" Month="9" Year="1999"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="13" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial copied from MPA</Comment>
            </History>
            <History>
                <Date Day="4" Month="11" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Renaming of the element from bsic_result to sync_result.</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the frequencies which have to be added to the BA list in RR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>add_freq_list</Name>
                <Comment>BA list</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>ARFCN</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>BSIC</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_cr_par</Name>
                </ItemLink>
                <Comment>Valid Flag for GPRS Cell Selection Parameter</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cr_par</Name>
                </ItemLink>
                <Comment>GPRS Cell Selection Parameter</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="30" Month="4" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add valid flag for cell re-selection parameter</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Change long name for parameter &lt;v_cr_par&gt; and &lt;cr_par&gt;</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter identifies the channel which should be removed.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>rm_freq_list</Name>
                <Comment>frequencies to be removed</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>Channel Number</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>BSIC</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="17" Month="5" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Change type from UBYTE to STRUCT, no longer the index but the Channel number itself and the BSIC will be listed</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the results of the measurements ordered by the network.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>meas_res</Name>
                <Comment>measurements ordered by the network</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>ARFCN</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>BSIC</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rxlev</Name>
                </ItemLink>
                <Comment>RX Value</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element contains the Channel Number ARFCN and an index which refers to the ARFCN. This element is used in Extended in the Measurement procedure.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>arfcn_idx</Name>
                <Comment>Channel number and a associated index</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>Radio Frequency Number</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>idx</Name>
                </ItemLink>
                <Comment>Index to the ARFCN</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>initial</Comment>
            </History>
            <History>
                <Date Day="13" Month="8" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add references</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This field contains the result of the Extended Measurement procedure for one ARFCN.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>xmeas_res</Name>
                <Comment>results of the extended measurement</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn_idx</Name>
                </ItemLink>
                <Comment>Radio Frequency Number and index</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rxlev</Name>
                </ItemLink>
                <Comment>field strength</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>bsic</Name>
                </ItemLink>
                <Comment>Base Station Identification Code</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>initial</Comment>
            </History>
            <History>
                <Date Day="13" Month="8" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add references</Comment>
            </History>
            <History>
                <Date Day="3" Month="7" Year="2002"/>
                <Author>VK</Author>
                <Comment>rename ext_meas into xmeas</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter defines the PLMN identification.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>plmn</Name>
                <Comment>PLMN identification</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_plmn</Name>
                </ItemLink>
                <Comment>Valid Flag</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>mcc</Name>
                </ItemLink>
                <Control>[SIZE_MCC]</Control>
                <Comment>Mobile Country Code</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>mnc</Name>
                </ItemLink>
                <Control>[SIZE_MNC]</Control>
                <Comment>Mobile Network Code</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>Copied from GMMRR</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter identifies the Routing Area</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>rai</Name>
                <Comment>routing area identifier</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>plmn</Name>
                </ItemLink>
                <Comment>PLMN</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>lac</Name>
                </ItemLink>
                <Comment>Location Area Code</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rac</Name>
                </ItemLink>
                <Comment>Routing Area Code</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>Copied from GMMRR</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element defines the task itself and all additional parameter, which are needed to characterise the process of stopping it.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="UNION">
                <Name>task</Name>
                <Comment>Task</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_stop_ccch</Name>
                </ItemLink>
                <UnionTag>
                    <Name>RR_TASK_1</Name>
                </UnionTag>
                <Comment>Stop CCCH indicator</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_pim_pbcch</Name>
                </ItemLink>
                <UnionTag>
                    <Name>LEAVE_PIM_PBCCH</Name>
                </UnionTag>
                <Comment>Leave idle mode</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_pam_pbcch</Name>
                </ItemLink>
                <UnionTag>
                    <Name>LEAVE_PAM_PBCCH</Name>
                </UnionTag>
                <Comment>Leave access mode</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>v_ptm_pbcch</Name>
                </ItemLink>
                <UnionTag>
                    <Name>LEAVE_PTM_PBCCH</Name>
                </UnionTag>
                <Comment>Leave transfer mode</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="17" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter indicates the current location of the mobile equipment on a cell base.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>rr_cell_env</Name>
                <Comment>current location of the mobile equipment</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>plmn</Name>
                </ItemLink>
                <Comment>PLMN</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>lac</Name>
                </ItemLink>
                <Comment>Location Area Code</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cid</Name>
                </ItemLink>
                <Comment>Cell Identification</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains Network control parameters for measurements in GRR. These parameters are received from SI-2quater.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>nc_para_struct</Name>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Network control parameters</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>nco</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Network control order</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>is_valid</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Indicates whether following NC para are valid or not</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>nc_non_drx</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>NC-NON-DRX</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>nc_rep_per_i</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>NC Reporting period in PIM</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>nc_rep_per_t</Name>
                </ItemLink>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Primitive structure element item</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>R99 PEMR feature</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">GPRS cell selection parameters according to definition in GSM 04.60, Packet Measurement Order.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>cr_par</Name>
                <Comment>GPRS Cell Selection Parameter</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>cell_bar_access_2</Name>
                </ItemLink>
                <Comment>CELL_BAR_ACCESS_2</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>exc_acc</Name>
                </ItemLink>
                <Comment>EXC_ACC</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>same_ra_as_serving_cell</Name>
                </ItemLink>
                <Comment>SAME_RA_AS_SERVING_CELL</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_rxlev_access_min</Name>
                </ItemLink>
                <Comment>Primitive structure element item</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_ms_txpwr_max_cch</Name>
                </ItemLink>
                <Comment>GPRS_RXLEV_ACCESS_MIN</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_temporary_offset</Name>
                </ItemLink>
                <Comment>GPRS_MS_TXPWR_MAX_CCH</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_penalty_time</Name>
                </ItemLink>
                <Comment>GPRS_PENALTY_TIME</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>gprs_reselect_offset</Name>
                </ItemLink>
                <Comment>GPRS_RESELECT_OFFSET</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>priority_class</Name>
                </ItemLink>
                <Comment>PRIORITY_CLASS</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>hcs_thr</Name>
                </ItemLink>
                <Comment>HCS_THR</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>si13_location</Name>
                </ItemLink>
                <Comment>SI13_LOCATION</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>pbcch_location</Name>
                </ItemLink>
                <Comment>PBCCH_LOCATION</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>psi1_repeat_period</Name>
                </ItemLink>
                <Comment>PSI1_REPEAT_PERIOD</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="27" Month="10" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
        <PrimStructElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This list contains all the neighbour cell arfcn's  to be used by L1 for sychronisation. This list contains even the RTD value of the neighbour cell . </XHTMLElement>
                </DocElement>
            </Description>
            <PrimStructElemDef Type="STRUCT">
                <Name>ncell_sync_list</Name>
                <Version>REL99 AND TI_PS_FF_RTD</Version>
                <Comment>List of neighbourcell that needs to be synchronised.</Comment>
            </PrimStructElemDef>
            <PrimStructElemItem Presentation="MANDATORY">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>arfcn</Name>
                </ItemLink>
                <Comment>Primitive structure element item</Comment>
            </PrimStructElemItem>
            <PrimStructElemItem Presentation="OPTIONAL">
                <ItemLink>
                    <DocName DocType="SAP">rrgrr</DocName>
                    <Name>rtd</Name>
                </ItemLink>
                <Control>[0..MAX_NUM_OF_RTD_VALUES]</Control>
                <Comment>Primitive structure element item</Comment>
            </PrimStructElemItem>
            <History>
                <Date Day="13" Month="02" Year="2007"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </PrimStructElem>
    </PrimStructElementsSection>
    <PrimBasicElementsSection>
        <Description>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">Parameters shall be part of the primitives described above and if applied the parameters shall contain the values specified here. These values are selected to correspond to element values used in the air interface protocol.</XHTMLElement>
            </DocElement>
        </Description>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Cause indicates the support of GPRS.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>cause</Name>
                <Type>U8</Type>
                <Comment>Cause</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_cause</Name>
            </ValuesLink>
            <History>
                <Date Day="16" Month="6" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains serving cell information.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>bcch_arfcn</Name>
                <Type>U16</Type>
                <Comment>Frequency of BCCH</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Frequency of BCCH added</Comment>
            </History>
            <History>
                <Date Day="31" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Access class for RACH added</Comment>
            </History>
            <History>
                <Date Day="30" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Power offset added</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>add plmn and la forbidden</Comment>
            </History>
            <History>
                <Date Day="27" Month="6" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add lac</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add bcch_bsic</Comment>
            </History>
            <History>
                <Date Day="17" Month="1" Year="2002"/>
                <Author>ID</Author>
                <Comment>add limited</Comment>
            </History>
            <History>
                <Date Day="25" Month="3" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add bs_pa_mfrms</Comment>
            </History>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add parameter rr_cell_env, remove parameter lac</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Add parameter &amp;lt;gprs_rxlev_access_min&amp;gt;, rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND - add parameter BA list, remove la_forb and plmn_forb</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains serving cell information.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>bcch_bsic</Name>
                <Type>U8</Type>
                <Comment>BSIC of BCCH</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Frequency of BCCH added</Comment>
            </History>
            <History>
                <Date Day="31" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Access class for RACH added</Comment>
            </History>
            <History>
                <Date Day="30" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Power offset added</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>add plmn and la forbidden</Comment>
            </History>
            <History>
                <Date Day="27" Month="6" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add lac</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add bcch_bsic</Comment>
            </History>
            <History>
                <Date Day="17" Month="1" Year="2002"/>
                <Author>ID</Author>
                <Comment>add limited</Comment>
            </History>
            <History>
                <Date Day="25" Month="3" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add bs_pa_mfrms</Comment>
            </History>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add parameter rr_cell_env, remove parameter lac</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Add parameter &amp;lt;gprs_rxlev_access_min&amp;gt;, rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND - add parameter BA list, remove la_forb and plmn_forb</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains serving cell information.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ac_class</Name>
                <Type>U16</Type>
                <Comment>Access class for RACH</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Frequency of BCCH added</Comment>
            </History>
            <History>
                <Date Day="31" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Access class for RACH added</Comment>
            </History>
            <History>
                <Date Day="30" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Power offset added</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>add plmn and la forbidden</Comment>
            </History>
            <History>
                <Date Day="27" Month="6" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add lac</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add bcch_bsic</Comment>
            </History>
            <History>
                <Date Day="17" Month="1" Year="2002"/>
                <Author>ID</Author>
                <Comment>add limited</Comment>
            </History>
            <History>
                <Date Day="25" Month="3" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add bs_pa_mfrms</Comment>
            </History>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add parameter rr_cell_env, remove parameter lac</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Add parameter &amp;lt;gprs_rxlev_access_min&amp;gt;, rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND - add parameter BA list, remove la_forb and plmn_forb</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains serving cell information.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>pwr_offset</Name>
                <Type>U8</Type>
                <Comment>Power offset</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Frequency of BCCH added</Comment>
            </History>
            <History>
                <Date Day="31" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Access class for RACH added</Comment>
            </History>
            <History>
                <Date Day="30" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Power offset added</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>add plmn and la forbidden</Comment>
            </History>
            <History>
                <Date Day="27" Month="6" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add lac</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add bcch_bsic</Comment>
            </History>
            <History>
                <Date Day="17" Month="1" Year="2002"/>
                <Author>ID</Author>
                <Comment>add limited</Comment>
            </History>
            <History>
                <Date Day="25" Month="3" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add bs_pa_mfrms</Comment>
            </History>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add parameter rr_cell_env, remove parameter lac</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Add parameter &amp;lt;gprs_rxlev_access_min&amp;gt;, rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND - add parameter BA list, remove la_forb and plmn_forb</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains serving cell information.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>limited</Name>
                <Type>U8</Type>
                <Comment>Limited service</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="14" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Frequency of BCCH added</Comment>
            </History>
            <History>
                <Date Day="31" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Access class for RACH added</Comment>
            </History>
            <History>
                <Date Day="30" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Power offset added</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>add plmn and la forbidden</Comment>
            </History>
            <History>
                <Date Day="27" Month="6" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add lac</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add bcch_bsic</Comment>
            </History>
            <History>
                <Date Day="17" Month="1" Year="2002"/>
                <Author>ID</Author>
                <Comment>add limited</Comment>
            </History>
            <History>
                <Date Day="25" Month="3" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add bs_pa_mfrms</Comment>
            </History>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add parameter rr_cell_env, remove parameter lac</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Add parameter &amp;lt;gprs_rxlev_access_min&amp;gt;, rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
            <History>
                <Date Day="7" Month="8" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Merging of RRGRR_GPRS_IND and RRGRR_SI13_IND - add parameter BA list, remove la_forb and plmn_forb</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains a service data unit.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>l_buf</Name>
                <Type>U16</Type>
                <Comment>length of content in bit</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="6" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains a service data unit.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>o_buf</Name>
                <Type>U16</Type>
                <Comment>offset of content in bit</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="6" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains a service data unit.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>buf</Name>
                <Type>U8</Type>
                <Comment>buffer content</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="6" Month="10" Year="1999"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter indicates which SI should be read by the RR (TIL).</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>si_to_read</Name>
                <Type>U8</Type>
                <Comment>SI to read</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_si_to_read</Name>
            </ValuesLink>
            <History>
                <Date Day="28" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter contains possible values for SI1 states.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>si1_state</Name>
                <Type>U8</Type>
                <Comment>SI1 states</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_si1_state</Name>
            </ValuesLink>
            <History>
                <Date Day="28" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter contains possible values for SI3 states.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>si3_state</Name>
                <Type>U8</Type>
                <Comment>SI3 states</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_si3_state</Name>
            </ValuesLink>
            <History>
                <Date Day="28" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter contains possible values for SI13 states.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>si13_state</Name>
                <Type>U8</Type>
                <Comment>SI13 states</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_si13_state</Name>
            </ValuesLink>
            <History>
                <Date Day="28" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter contains the paging type.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>pg_type</Name>
                <Type>U8</Type>
                <Comment>The type of paging</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_pg_type</Name>
            </ValuesLink>
            <History>
                <Date Day="29" Month="2" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter indicates whether the RR connection establishment is allowed or not.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rr_est</Name>
                <Type>U8</Type>
                <Comment>Allowance of RR establishment</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_rr_est</Name>
            </ValuesLink>
            <History>
                <Date Day="1" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_non_gprs</Name>
                <Type>U8</Type>
                <Comment>Valid flag for non GPRS</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>att</Name>
                <Type>U8</Type>
                <Comment>Attach/detach allowed</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_T3212</Name>
                <Type>U8</Type>
                <Comment>Valid flag for T3212</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>T3212</Name>
                <Type>U8</Type>
                <Comment>T3212 value</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>neci</Name>
                <Type>U8</Type>
                <Comment>Half rate support</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>pwrc</Name>
                <Type>U8</Type>
                <Comment>Power control indicator</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>dtx</Name>
                <Type>U8</Type>
                <Comment>DTX indicator</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>radio_link_timeout</Name>
                <Type>U8</Type>
                <Comment>Supervisory timer for RR connection</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>bs_ag_blks_res</Name>
                <Type>U8</Type>
                <Comment>Number of blocks reserved for access grant</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ccch_conf</Name>
                <Type>U8</Type>
                <Comment>Physical channel configuration for CCCH</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>max_retrans</Name>
                <Type>U8</Type>
                <Comment>Maximum number of retransmissions</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>tx_integer</Name>
                <Type>U8</Type>
                <Comment>Number of slots to spread transmission</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ec</Name>
                <Type>U8</Type>
                <Comment>Emergency call allowed</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This flag is sent by network in non-GPRS cell options IE in PSI2. This indicates to the MS whether Early classmark sending is allowed in the cell or not.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ecsc</Name>
                <Type>U8</Type>
                <Version>REL99</Version>
                <Comment>Early Classmark sending flag in PSI2</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_ecsc</Name>
            </ValuesLink>
            <History>
                <Date Day="20" Month="04" Year="2006"/>
                <Author>xparapgu</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains non-gprs parameters to start a CS call in a cell where PBCCH is present.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_ext_ie</Name>
                <Type>U8</Type>
                <Comment>Valid flag for extension bits IE</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Rename parameter &amp;lt;ms_txpwr_max_ccch&amp;gt; to &amp;lt;gprs_ms_txpwr_max_cch&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains possible future extension IE.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ext_len</Name>
                <Type>U8</Type>
                <Comment>Extension length</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains possible future extension IE.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>spare_bit</Name>
                <Type>U8</Type>
                <Comment>Spare bit (val(ext_len)+1)</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="9" Month="3" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The channel needed field indicates which type of channel is needed for the mobile station for the transaction linked to the paging procedure. The field is coded according to following table:</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">0 Any channel</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">1 SDCCH</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">2 TCH/F (Full rate)</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">3 TCH/H or TCH/F (Dual rate)</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ch_needed</Name>
                <Type>U8</Type>
                <Comment>Channel needed field</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="18" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The optional eMLPP_PRIORITY field relates to a Mobile Station Identity and may only be present when the page relates to a paging request to trigger RR connection establishment. The eMLPP_PRIORITY field is coded as the Priority field defined in the P1 Rest Octets information element in GSM 04.08.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_emlpp</Name>
                <Type>U8</Type>
                <Comment>Valid flag</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="18" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The optional eMLPP_PRIORITY field relates to a Mobile Station Identity and may only be present when the page relates to a paging request to trigger RR connection establishment. The eMLPP_PRIORITY field is coded as the Priority field defined in the P1 Rest Octets information element in GSM 04.08.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>emlpp</Name>
                <Type>U8</Type>
                <Comment>Value of emlpp_prio</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="18" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">When a mobile station which is IMSI attached for GPRS services enters the dedicated mode, and when the mobile station limitations make it unable to handle both dedicated mode and either packet idle mode or packet transfer mode simultaneously, the mobile station shall perform the GPRS suspension procedure.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>susp_req</Name>
                <Type>U8</Type>
                <Comment>Send GPRS suspension request flag</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_susp_req</Name>
            </ValuesLink>
            <History>
                <Date Day="20" Month="4" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Channel Request Data as described in GSM04.08 chapter 9.1.8.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>req_data</Name>
                <Type>U8</Type>
                <Comment/>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This is the index of the valid parts of the Immediate Assignment Extended.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ia_index</Name>
                <Type>U8</Type>
                <Comment>indicates valid parts of the Imm Ass Ext msg</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The Frame Number is necessary in some primitives because of the fact that the reception time of immediate assignment in some case affects the behaviour of GRR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>fn</Name>
                <Type>U32</Type>
                <Comment>Frame Number</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This value is from the immediate assignment reject message.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>wait_ind</Name>
                <Type>U8</Type>
                <Comment>wait indication (T3122)</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="12" Year="1954"/>
                <Author>doc2xml</Author>
                <Comment>no history in source document</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The Retry Bit shall indicate whether the MS transmitted the CHANNEL REQUEST message one time or more than one time during its most recent channel access. The MS shall send the same value for the Retry Bit in each uplink RLC/MAC block of the TBF.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>r_bit</Name>
                <Type>U8</Type>
                <Comment>retry bit</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_r_bit</Name>
            </ValuesLink>
            <History>
                <Date Day="5" Month="7" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Contains the packet temporary IMSI for receiving packet pagings on the CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>old_ptmsi</Name>
                <Type>U32</Type>
                <Comment>Packet Temporary Mobile Subsciber Identity</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_old_ptmsi</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="9" Year="2000"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="3" Month="3" Year="2003"/>
                <Author>ID</Author>
                <Comment>add values</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Contains the packet temporary IMSI for receiving packet pagings on the CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>new_ptmsi</Name>
                <Type>U32</Type>
                <Comment>Packet Temporary Mobile Subsciber Identity</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_old_ptmsi</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="9" Year="2000"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="3" Month="3" Year="2003"/>
                <Author>ID</Author>
                <Comment>add values</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Contains the MAC Mode the MS would prefer to operate with.This IE is only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>mac_req</Name>
                <Type>U8</Type>
                <Comment>MAC mode request</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Contains the Coding Scheme the MS would prefer to operate with.This IE is only used in a Packet Access</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>cs_req</Name>
                <Type>U8</Type>
                <Comment>Channel Coding Schemme Request</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Contains the packet temporary logical link identifier for the packet transfer to be initiated.This IE is only</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>tlli</Name>
                <Type>U32</Type>
                <Comment>temporary logical link identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>mo_mt</Name>
                <Type>U8</Type>
                <Comment>MO/MT FALG</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>prio</Name>
                <Type>U8</Type>
                <Comment>Priority</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rlc_mode_req</Name>
                <Type>U8</Type>
                <Comment>RLC Mode</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>llc_type</Name>
                <Type>U8</Type>
                <Comment>LLC Frame Type</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>req_bwd</Name>
                <Type>U16</Type>
                <Comment>Requested Bandwidth</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains characteristics of the packet data channel requested by the MS.This IE is</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">only used in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rlc_octets</Name>
                <Type>U16</Type>
                <Comment>RLC Octet Count</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the results of the GPRS-specific measurements by the MS. This IE is only used</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>c_value</Name>
                <Type>U8</Type>
                <Comment>C_Value</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the results of the GPRS-specific measurements by the MS. This IE is only used</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rxqual</Name>
                <Type>U8</Type>
                <Comment>Rx Quality</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the results of the GPRS-specific measurements by the MS. This IE is only used</XHTMLElement>
                </DocElement>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">in a Packet Access Procedure on CCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>sign_var</Name>
                <Type>U8</Type>
                <Comment>Signal Variance</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="9" Year="2000"/>
                <Author>ROZ</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Stop Cause indicates the reason for stopping the SDCCH.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>stop_cause</Name>
                <Type>U8</Type>
                <Comment>Stop cause</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_stop_cause</Name>
            </ValuesLink>
            <History>
                <Date Day="16" Month="10" Year="2000"/>
                <Author>LE</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter identifies a channel number.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>arfcn</Name>
                <Type>U16</Type>
                <Comment>channel number</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_arfcn</Name>
            </ValuesLink>
            <History>
                <Date Day="24" Month="8" Year="1999"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="13" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial copied from MPA</Comment>
            </History>
            <History>
                <Date Day="2" Month="5" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add constant RRGRR_INVALID_ARFCN.</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the result of a data block read operation.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>sb_flag</Name>
                <Type>U8</Type>
                <Comment>synchronisation burst flag</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_sb_flag</Name>
            </ValuesLink>
            <History>
                <Date Day="24" Month="8" Year="1999"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="13" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial copied from MPA</Comment>
            </History>
            <History>
                <Date Day="4" Month="11" Year="2002"/>
                <Author>SAB</Author>
                <Comment>SB_UNKNOWN included</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the base station identity code.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>bsic</Name>
                <Type>U8</Type>
                <Comment>base station identification code</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_bsic</Name>
            </ValuesLink>
            <History>
                <Date Day="24" Month="8" Year="1999"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="13" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial copied from MPA</Comment>
            </History>
            <History>
                <Date Day="17" Month="5" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add c-macro RRGRR_INVALID_BSIC</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter indicates Cell re-selection mode.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>cr_type</Name>
                <Type>U8</Type>
                <Comment>Cell re-selection mode</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_cr_type</Name>
            </ValuesLink>
            <History>
                <Date Day="25" Month="10" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="30" Month="3" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add CONT_CR; change the name to cr_type</Comment>
            </History>
            <History>
                <Date Day="10" Month="4" Year="2001"/>
                <Author>ID</Author>
                <Comment>Add CR_CS</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates the result of synchronisation.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>sync_res</Name>
                <Type>U8</Type>
                <Comment>Indicates the result of synchronisation</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_sync_res</Name>
            </ValuesLink>
            <History>
                <Date Day="10" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates the type of the cell to be synchronized.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>cell_type</Name>
                <Type>U8</Type>
                <Comment>Ncell or Scell</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_cell_type</Name>
            </ValuesLink>
            <History>
                <Date Day="24" Month="11" Year="2000"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This structure contains the frequencies which have to be added to the BA list in RR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_cr_par</Name>
                <Type>U8</Type>
                <Comment>Valid Flag for GPRS Cell Selection Parameter</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="1" Month="4" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="30" Month="4" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add valid flag for cell re-selection parameter</Comment>
            </History>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Change long name for parameter &amp;lt;v_cr_par&amp;gt; and &amp;lt;cr_par&amp;gt;</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter indicates if Layer 1 shall work in PAGING REORG(Non-DRX Mode) or not.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>pag_mode</Name>
                <Type>U8</Type>
                <Comment>Paging Mode</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_pag_mode</Name>
            </ValuesLink>
            <History>
                <Date Day="10" Month="5" Year="2001"/>
                <Author>Can</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="21" Month="11" Year="2001"/>
                <Author>ID</Author>
                <Comment>add PAG_MODE_TRANSFER</Comment>
            </History>
            <History>
                <Date Day="28" Month="11" Year="2001"/>
                <Author>ID</Author>
                <Comment>change names and add _PTM_NP,_PIM_N</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The SPLIT PG CYCLE value is derived from the SPLIT PG CYCLE CODE and has values between 1 to 352, the value 704 is equivalent to no DRX mode.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>split_pg</Name>
                <Type>U16</Type>
                <Comment>Split paging cycle (the value, NOT the code)</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_split_pg</Name>
            </ValuesLink>
            <History>
                <Date Day="29" Month="5" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">RAC.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rac</Name>
                <Type>U8</Type>
                <Comment>routing are code</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_rac</Name>
            </ValuesLink>
            <History>
                <Date Day="3" Month="7" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>value added</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates whether PBCCH is present or not</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>is_pbcch_present</Name>
                <Type>U8</Type>
                <Comment>Indicates whether PBCCH is present or not</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="12" Month="7" Year="2001"/>
                <Author>ID</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates the outcome of reconnection procedure at RR</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>reconn_state</Name>
                <Type>U8</Type>
                <Comment>Indicates that the reconnection was successful or not</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_reconn_state</Name>
            </ValuesLink>
            <History>
                <Date Day="25" Month="7" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates why GRR requests the reconnection at RR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>reconn_cause</Name>
                <Type>U8</Type>
                <Comment>Cause for the reconnection, refer to causes sent with ASSIGNMENT FAILURE [3]</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_reconn_cause</Name>
            </ValuesLink>
            <History>
                <Date Day="25" Month="7" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="26" Month="9" Year="2001"/>
                <Author>SAB</Author>
                <Comment>Add more values</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the type of identity recognised during paging.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ident_type</Name>
                <Type>U8</Type>
                <Comment>Identity type</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_ident_type</Name>
            </ValuesLink>
            <History>
                <Date Day="8" Month="10" Year="2001"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Contains the packet TMSI.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>tmsi</Name>
                <Type>U32</Type>
                <Comment>temporary logical link identifier</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="5" Month="11" Year="2001"/>
                <Author>ID</Author>
                <Comment>initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The Reporting Type controls the Extended Measurement procedure.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>report_type</Name>
                <Type>U8</Type>
                <Comment>Extended Measurement reporting type</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_report_type</Name>
            </ValuesLink>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>initial</Comment>
            </History>
            <History>
                <Date Day="1" Month="7" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add constant REP_TYPE_RES</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The NCC Permitted field controls the result of the Extended Measurement procedure.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ncc_permitted</Name>
                <Type>U8</Type>
                <Comment>network colour code permission indicator</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The Call Reference ID is used in a Extended Measurement procedure to relate the measurement with the measurement request.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>call_ref</Name>
                <Type>U8</Type>
                <Comment>Call reference ID</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="22" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element indicates the state of the extended measurement results.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>xmeas_cause</Name>
                <Type>U8</Type>
                <Comment>indicates the state of the extended measurement results</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_xmeas_cause</Name>
            </ValuesLink>
            <History>
                <Date Day="23" Month="11" Year="2001"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="3" Month="7" Year="2002"/>
                <Author>VK</Author>
                <Comment>rename ext_meas into xmeas</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the location area code.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>lac</Name>
                <Type>U16</Type>
                <Comment>location area code</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_lac</Name>
            </ValuesLink>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>copied from GMMRR</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter defines the PLMN identification.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_plmn</Name>
                <Type>U8</Type>
                <Comment>Valid Flag</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>Copied from GMMRR</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter defines the PLMN identification.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>mcc</Name>
                <Type>U8</Type>
                <Comment>Mobile Country Code</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>Copied from GMMRR</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter defines the PLMN identification.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>mnc</Name>
                <Type>U8</Type>
                <Comment>Mobile Network Code</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="23" Month="4" Year="2002"/>
                <Author>ANS</Author>
                <Comment>Copied from GMMRR</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element indicates whether the CCCH shall be stopped or not.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_stop_ccch</Name>
                <Type>U8</Type>
                <Comment>Indicates whether CCCH shall be stopped</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_v_stop_ccch</Name>
            </ValuesLink>
            <History>
                <Date Day="17" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="26" Month="4" Year="2002"/>
                <Author>MPA</Author>
                <Comment>add INVALID_MSG</Comment>
            </History>
            <History>
                <Date Day="1" Month="7" Year="2002"/>
                <Author>SAB</Author>
                <Comment>add ABORT_ACCESS</Comment>
            </History>
            <History>
                <Date Day="2" Month="9" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add TASK_STOP_DUMMY_VALUE</Comment>
            </History>
            <History>
                <Date Day="28" Month="4" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Remove ABORT_ACCESS</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the cell identification.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>cid</Name>
                <Type>U16</Type>
                <Comment>cell identification</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="11" Month="4" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the receive signal strength level.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rxlev</Name>
                <Type>U8</Type>
                <Comment>receive signal strength level</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_rxlev</Name>
            </ValuesLink>
            <History>
                <Date Day="13" Month="8" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines an index.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>idx</Name>
                <Type>U8</Type>
                <Comment>index</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_idx</Name>
            </ValuesLink>
            <History>
                <Date Day="13" Month="8" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element indicates to RR the new state of GRR.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>state</Name>
                <Type>U8</Type>
                <Comment>Indicates to RR the state of GRR</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_state</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="6" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element indicates whether the CCCH shall be stopped or not. The same c-macro definitions as for "Stop CCCH Indicator" shall be used.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_pim_pbcch</Name>
                <Type>U8</Type>
                <Comment>pim</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="22" Month="7" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
            <History>
                <Date Day="3" Month="9" Year="2002"/>
                <Author>SAB</Author>
                <Comment>Add description</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element is not used.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_pam_pbcch</Name>
                <Type>U8</Type>
                <Comment>pam</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="22" Month="7" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This element is not used.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>v_ptm_pbcch</Name>
                <Type>U8</Type>
                <Comment>ptm</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="22" Month="7" Year="2002"/>
                <Author>MPA</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The parameter defines the configuration (point in time of transmission) of the Paging Channel at the Base Station in units of Multi Frames.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>bs_pa_mfrms</Name>
                <Type>U8</Type>
                <Comment>Paging Channel configuration</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="3" Month="7" Year="2002"/>
                <Author>VK</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This field combines the CELL_BAR_ACCESS and CELL_BAR_QUALIFY parameters and indicates the status for cell reselection, see GSM 05.08.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>cell_bar_access_2</Name>
                <Type>U8</Type>
                <Comment>CELL_BAR_ACCESS_2</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_cell_bar_access_2</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This field is used by the network to prevent mobiles from camping on the cell.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>exc_acc</Name>
                <Type>U8</Type>
                <Comment>EXC_ACC</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_exc_acc</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This field indicates whether the cell is in the same routing area as the serving cell.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>same_ra_as_serving_cell</Name>
                <Type>U8</Type>
                <Comment>SAME_RA_AS_SERVING_CELL</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_same_ra_as_serving_cell</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This field is used by the mobile station to apply a positive or negative offset and a hysteresis to the GPRS cell reselection criterion. Default value is 0 dB. If the field is omitted from the message, the default value shall be used by the mobile station.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>gprs_reselect_offset</Name>
                <Type>U8</Type>
                <Comment>GPRS_RESELECT_OFFSET</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_gprs_reselect_offset</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The GPRS_RXLEV_ACCESS_MIN field is coded as the binary representation of the 'RXLEV_ACCESS_MIN' defined in GSM 05.08. It is the minimum received level at the mobile station required for access to the system.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>gprs_rxlev_access_min</Name>
                <Type>U8</Type>
                <Comment>GPRS_RXLEV_ACCESS_MIN</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_gprs_rxlev_access_min</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The GPRS_MS_TXPWR_MAX_CCH field is coded as the binary representation of the 'power control level' in GSM 05.05 corresponding to the maximum TX power level a mobile station may use when accessing on a packet control channel. This value shall be used by the mobile station according to GSM 05.08.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>gprs_ms_txpwr_max_cch</Name>
                <Type>U8</Type>
                <Comment>GPRS_MS_TXPWR_MAX_CCH</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_gprs_ms_txpwr_max_cch</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The GPRS_TEMPORARY_OFFSET field indicates the negative offset to C32 that the mobile station shall use for duration of GPRS_PENALTY_TIME. It is used by the mobile station as part of its calculation of C32 for the cell reselection process.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>gprs_temporary_offset</Name>
                <Type>U8</Type>
                <Comment>GPRS_TEMPORARY_OFFSET</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_gprs_temporary_offset</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The GPRS_PENALTY_TIME defines the length of time for which GPRS_TEMPORARY_OFFSET is active.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>gprs_penalty_time</Name>
                <Type>U8</Type>
                <Comment>GPRS_PENALTY_TIME</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_gprs_penalty_time</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The PRIORITY_CLASS field contains the binary representation of the HCS priority for the cell.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>priority_class</Name>
                <Type>U8</Type>
                <Comment>PRIORITY_CLASS</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_priority_class</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The HCS_THR is the HCS signal strength threshold</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>hcs_thr</Name>
                <Type>U8</Type>
                <Comment>HCS_THR</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_hcs_thr</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The SI13_LOCATION field, if present, indicates the logical channel where the SYSTEM INFORMATION TYPE 13 is broadcast (see GSM 05.02).</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>si13_location</Name>
                <Type>U8</Type>
                <Comment>SI13 Location</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_si13_location</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The PBCCH_LOCATION field, if present, indicates the location of the PBCCH on the BCCH carrier (see GSM 05.02).</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>pbcch_location</Name>
                <Type>U8</Type>
                <Comment>PBCCH_LOCATION</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_pbcch_location</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">The PSI1_REPEAT_PERIOD field indicates the PSI repeat period.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>psi1_repeat_period</Name>
                <Type>U8</Type>
                <Comment>PSI1_REPEAT_PERIOD</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_psi1_repeat_period</Name>
            </ValuesLink>
            <History>
                <Date Day="12" Month="3" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates the NC mode configured by the network.</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>nc_mode</Name>
                <Type>U8</Type>
                <Comment>NC mode</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_nc_mode</Name>
            </ValuesLink>
            <History>
                <Date Day="8" Month="7" Year="2003"/>
                <Author>SAB</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION"/>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>meas_cause</Name>
                <Type>U8</Type>
                <Comment>Basic Element</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_meas_cause</Name>
            </ValuesLink>
            <History>
                <Date Day="16" Month="08" Year="2004"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION"/>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>sync_type</Name>
                <Type>U8</Type>
                <Comment>Sync Info indicating the Reconfirm Sync timer status</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>VAL_sync_type</Name>
            </ValuesLink>
            <History>
                <Date Day="11" Month="01" Year="2006"/>
                <Author>xjohnrak</Author>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Network control Order for cell measurements. NCO is not valid if the value received is NCO_EMPTY</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>nco</Name>
                <Type>U8</Type>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Network control order, values same as enum T_NC_ORDER in grr.h</Comment>
            </PrimBasicElemDef>
            <ValuesLink>
                <DocName DocType="SAP">rrgrr</DocName>
                <Name>Val_nco</Name>
            </ValuesLink>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>R99 PEMR feature</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates validity of an element</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>is_valid</Name>
                <Type>U8</Type>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Indicates whether NC parameters following are valid</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>R99 PEMR feature</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION"/>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>nc_non_drx</Name>
                <Type>U8</Type>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>minimum time the mobile station shall stay in non-DRX mode after an NC-measurement report </Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>R99 PEMR feature</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Time period for cell reselection measurement reporting for packet idle mode (I) </XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>nc_rep_per_i</Name>
                <Type>U8</Type>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Time period for cell reselection measurement reporting for packet idle mode (I) </Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>R99 PEMR feature</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Time period for cell reselection measurement reporting for packet transfer mode (T) </XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>nc_rep_per_t</Name>
                <Type>U8</Type>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Time period for cell reselection measurement reporting for packet transfer mode (T) </Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author>x0059970</Author>
                <Comment>R99 PEMR feature</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Indicates BA Ind used by RR for neighbor cell list</XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>ba_ind</Name>
                <Type>U8</Type>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>BA_IND used by RR for neighbor cell list</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="28" Month="10" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
        <PrimBasicElem>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">0,1 or more Real Time Difference values for each available neighbour cell arfcn.This is used for the neighbour cell synchronisation without acquiring the FB and SB of the neighbourcell. </XHTMLElement>
                </DocElement>
            </Description>
            <PrimBasicElemDef>
                <Name>rtd</Name>
                <Type>U16</Type>
                <Version>REL99 AND TI_PS_FF_RTD</Version>
                <Comment>Real time difference value for all the neighbour cells</Comment>
            </PrimBasicElemDef>
            <History>
                <Date Day="13" Month="02" Year="2007"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </PrimBasicElem>
    </PrimBasicElementsSection>
    <ValuesSection>
        <Description>
            <DocElement>
                <XHTMLElement Type="TEXT_SECTION">This section contains all sets of values that are defined for the RRGRR SAP</XHTMLElement>
            </DocElement>
        </Description>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_cause</Name>
                <Comment>values for cause</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>GPRS_NOT_SUPPORTED</Alias>
                <Comment>Serving cell does not support GPRS</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>GPRS_SUPPORTED</Alias>
                <Comment>Serving cell supports GPRS</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>GPRS_CELL_NOT_SUITABLE</Alias>
                <Comment>for GRR-controlled cell reselection</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_si_to_read</Name>
                <Comment>values for si_to_read</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>UNSPECIFIED_SI</Alias>
                <Comment>Update of unspecified SI message or SI messages</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>UPDATE_SI1</Alias>
                <Comment>Update of SI1 message</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>UPDATE_SI2_SI2BIS_OR_SI2TER</Alias>
                <Comment>Update of SI2, SI2 bis or SI2 ter message</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">3</Value>
                <Alias>UPDATE_SI3_SI4_SI7_OR_SI8</Alias>
                <Comment>Update of SI3, SI4, SI7 or SI8 message</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">4</Value>
                <Alias>UPDATE_SI9</Alias>
                <Comment>Update of SI9 message</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">5</Value>
                <Alias>COMPLETE_SI</Alias>
                <Comment>Read complete SI</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">255</Value>
                <Alias>UPDATE_SI13</Alias>
                <Comment>Update or read of SI13</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_si1_state</Name>
                <Comment>values for si1_state</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SI1_NOT_SEND</Alias>
                <Comment>SI not send</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SI1_RECEIVED</Alias>
                <Comment>SI received</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>SI1_NOT_RECEIVED</Alias>
                <Comment>SI not received</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_si3_state</Name>
                <Comment>values for si3_state</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SI3_NOT_SEND</Alias>
                <Comment>SI not send</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SI3_RECEIVED</Alias>
                <Comment>SI received</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>SI3_NOT_RECEIVED</Alias>
                <Comment>SI not received</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_si13_state</Name>
                <Comment>values for si13_state</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SI13_NOT_SEND</Alias>
                <Comment>SI not send</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SI13_RECEIVED</Alias>
                <Comment>SI received</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>SI13_NOT_RECEIVED</Alias>
                <Comment>SI not received</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_pg_type</Name>
                <Comment>values for pg_type</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>RRGRR_IMSI</Alias>
                <Comment>MS is paged by IMSI</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>RRGRR_PTMSI</Alias>
                <Comment>MS is paged by PTMSI (GPRS TMSI)</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_rr_est</Name>
                <Comment>values for rr_est</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>RR_EST_NOT_ALLOWED</Alias>
                <Comment>RR establishment not allowed</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>RR_EST_ALLOWED</Alias>
                <Comment>RR establishment allowed</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION"/>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_ecsc</Name>
                <Version>REL99</Version>
                <Comment>values for ecsc</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>ECS_FORBIDDEN</Alias>
                <Comment>Early classmark sending forbidden in the cell</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>ECS_ALLOWED</Alias>
                <Comment>Early classmark sending allowed in the cell</Comment>
            </ValuesItem>
            <History>
                <Date Day="20" Month="04" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_susp_req</Name>
                <Comment>values for susp_req</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SUSPENSION_REQ_NOT_NEEDED</Alias>
                <Comment>RR need not send GPRS suspension request</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SUSPENSION_REQ_NEEDED</Alias>
                <Comment>RR has to send GPRS suspension request</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_r_bit</Name>
                <Comment>values for r_bit</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>CHAN_REQ_SENT_ONCE</Alias>
                <Comment>MS has sent channel request only once</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>CHAN_REQ_SENT_MORE</Alias>
                <Comment>MS has sent channel request twice or more</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_old_ptmsi</Name>
                <Comment>values for old_ptmsi</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FFFFFFFF</Value>
                <Alias>RRGRR_PTMSI_INVALID</Alias>
                <Comment>P-TMSI or TMSI invalid (see GSM 3.03)</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_stop_cause</Name>
                <Comment>values for stop_cause</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">3</Value>
                <Alias>CONTENTION_RESOLUTION_FAIL</Alias>
                <Comment>Establishment fails due to contention resolution</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">4</Value>
                <Alias>DL_ESTABLISHMENT_FAIL</Alias>
                <Comment>Layer 2 establishment failure</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_arfcn</Name>
                <Comment>values for arfcn</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FFFF</Value>
                <Alias>RRGRR_INVALID_ARFCN</Alias>
                <Comment>Used to mark a channel number entry as invalid.</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>1</MinValue>
                <MaxValue>124</MaxValue>
                <Comment>GSM 900 without extension band</Comment>
            </ValuesRange>
            <ValuesRange ValueType="DEC">
                <MinValue>1</MinValue>
                <MaxValue>174</MaxValue>
                <Comment>GSM 900 with extension band</Comment>
            </ValuesRange>
            <ValuesRange ValueType="DEC">
                <MinValue>512</MinValue>
                <MaxValue>810</MaxValue>
                <Comment>PCS 1900</Comment>
            </ValuesRange>
            <ValuesRange ValueType="DEC">
                <MinValue>512</MinValue>
                <MaxValue>885</MaxValue>
                <Comment>DCS 1800</Comment>
            </ValuesRange>
            <ValuesRange ValueType="DEC">
                <MinValue>1</MinValue>
                <MaxValue>498</MaxValue>
                <Comment>Dual band(GSM/DCS)</Comment>
            </ValuesRange>
            <ValuesRange ValueType="DEC">
                <MinValue>1</MinValue>
                <MaxValue>548</MaxValue>
                <Comment>Dual band(EGSM/DCS)</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_sb_flag</Name>
                <Comment>values for sb_flag</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>NO_SB_FOUND</Alias>
                <Comment>synchronisation burst not found</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SB_FOUND</Alias>
                <Comment>synchronisation burst found</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>SB_UNKNOWN</Alias>
                <Comment>status of synchronisation burst unknown</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_bsic</Name>
                <Comment>values for bsic</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">255</Value>
                <Alias>RRGRR_INVALID_BSIC</Alias>
                <Comment>Used to identify a BSIC entry as invalid</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>63</MaxValue>
                <Comment>base station identification code</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_cr_type</Name>
                <Comment>values for cr_type</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>CR_NEW</Alias>
                <Comment>RR has to reselect the given cell</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>CR_COMPLETE</Alias>
                <Comment>RR has to camp on this cell</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>CR_CONT</Alias>
                <Comment>Continue cell reselection.</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">3</Value>
                <Alias>CR_CS</Alias>
                <Comment>start cell selection process again</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">4</Value>
                <Alias>CR_NEW_NOT_SYNCED</Alias>
                <Comment>start cr for not syncd cell (ie. PCCO)</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">124</Value>
                <Alias>CR_SUSPENDED_IDLE</Alias>
                <Comment>start idle procedures</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">125</Value>
                <Alias>CR_REQ_CANDIDATE</Alias>
                <Comment>inform GRR that is has to start a CR</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">126</Value>
                <Alias>CR_NORMAL</Alias>
                <Comment>Do not abort TBF</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">127</Value>
                <Alias>CR_ABNORMAL</Alias>
                <Comment>Abort TBF</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_sync_res</Name>
                <Comment>values for sync_res</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SYNC_OK</Alias>
                <Comment>Synchronisation OK</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SYNC_FAILED</Alias>
                <Comment>Synchronisation failed</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_cell_type</Name>
                <Comment>values for cell_type</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SYNC_SCELL</Alias>
                <Comment>Synchronisation to serving cell</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SYNC_NCELL</Alias>
                <Comment>Synchronisation to neighbour cell</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_pag_mode</Name>
                <Comment>values for pag_mode</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>PAG_MODE_LAST_ONE</Alias>
                <Comment>RR shall use the last page (before pag_Reorg)</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>PAG_MODE_REORG</Alias>
                <Comment>RR shall use Paging reorg mode</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>PAG_MODE_PTM_NP</Alias>
                <Comment>RR shall use the NORMAL paging in packet transfer mode, start only CCCH</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">3</Value>
                <Alias>PAG_MODE_PIM_NP</Alias>
                <Comment>RR shall start only CCCH with REORG and change to NORMAL paging</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">255</Value>
                <Alias>PAG_MODE_DEFAULT</Alias>
                <Comment>RR shall use the default paging mode and goes to idle mode</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_split_pg</Name>
                <Comment>values for split_pg</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">704</Value>
                <Alias>RRGRR_NO_DRX</Alias>
                <Comment>Non DRX mode</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_rac</Name>
                <Comment>values for rac</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>RRGRR_RAC_INVALID</Alias>
                <Comment>routing area code invalid</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_reconn_state</Name>
                <Comment>values for reconn_state</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>RECONN_OK</Alias>
                <Comment>The reconnection to the 'old' channel was cuessful</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>RECONN_LOW_FAIL</Alias>
                <Comment>A Lower Layer Failure occured during the reconnection.</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_reconn_cause</Name>
                <Comment>values for reconn_cause</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="BIN">00000000</Value>
                <Alias>RECONN_NORM_EVENT</Alias>
                <Comment>Normal event</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00000001</Value>
                <Alias>RECONN_UNSPECIFIED</Alias>
                <Comment>Abnormal release, unspecified</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00000010</Value>
                <Alias>RECONN_CHN_UNACCEPTABLE</Alias>
                <Comment>Abnormal release, channel unacceptable</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00000011</Value>
                <Alias>RECONN_TIMER_EXPIRED</Alias>
                <Comment>Abnormal release, timer expired</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00000100</Value>
                <Alias>RECONN_NO_ACTIVITY</Alias>
                <Comment>Abnormal release, no activity on the radio path</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00000101</Value>
                <Alias>RECONN_PREEMPTIVE</Alias>
                <Comment>Preemptive release</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00001000</Value>
                <Alias>RECONN_TA_OUT_OF_RANGE</Alias>
                <Comment>Handover impossible, timing advance out of range</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00001001</Value>
                <Alias>RECONN_CHANNEL_MODE</Alias>
                <Comment>Channel mode unacceptable</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">00001010</Value>
                <Alias>RECONN_FREQ_NOT_IMPL</Alias>
                <Comment>Frequency not implemented</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01000001</Value>
                <Alias>RECONN_CALL_CLEARED</Alias>
                <Comment>Call already cleared</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01011111</Value>
                <Alias>RECONN_INCORRECT_SEMANTIC</Alias>
                <Comment>Semantically incorrect message</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01100000</Value>
                <Alias>RECONN_INVALID_INFO</Alias>
                <Comment>Invalid mandatory information</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01100001</Value>
                <Alias>RECONN_UNKNWN_MSG_TYPE</Alias>
                <Comment>Message type non-existent or not implemented</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01100010</Value>
                <Alias>RECONN_INCMPTBLE_MSG_TYPE</Alias>
                <Comment>Message type not compatible with protocol state</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01100100</Value>
                <Alias>RECONN_COND_IE_ERROR</Alias>
                <Comment>Conditional IE error</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01100101</Value>
                <Alias>RECONN_NO_CELL_ALLOC</Alias>
                <Comment>No cell allocation available</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="BIN">01101111</Value>
                <Alias>RECONN_PROT_UNSPECIFIED</Alias>
                <Comment>Protocol error unspecified</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_ident_type</Name>
                <Comment>values for ident_type</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>ID_IMSI</Alias>
                <Comment>Paged by IMSI</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">4</Value>
                <Alias>ID_TMSI</Alias>
                <Comment>Paged by TMSI</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">8</Value>
                <Alias>ID_PTMSI</Alias>
                <Comment>Paged by PTMSI</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_report_type</Name>
                <Comment>values for report_type</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">0</Value>
                <Alias>REP_TYPE_1</Alias>
                <Comment>synchronize to the 6 strongest carriers and provide their BSICs</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">1</Value>
                <Alias>REP_TYPE_2</Alias>
                <Comment>synchronize to carriers in decreasing field strength until the BSICs for 6 carriers with allowed NCC are fully decoded</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">2</Value>
                <Alias>REP_TYPE_3</Alias>
                <Comment>no synchronization, no BSICs are provided</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">3</Value>
                <Alias>REP_TYPE_RES</Alias>
                <Comment>reserved, ignore request for measurement data in this version</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_xmeas_cause</Name>
                <Comment>values for xmeas_cause</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>EXT_MEAS_OK</Alias>
                <Comment>The results of the Extended Measurment procedure are valid.</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>EXT_MEAS_RESET</Alias>
                <Comment>GRR has stopped the Extended Measurement procedure</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>EXT_MEAS_LEAVE_IDLE</Alias>
                <Comment>RR has entered a non-idle state and stopped the Extended Measurement procedure</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_lac</Name>
                <Comment>values for lac</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FFFE</Value>
                <Alias>RRGRR_LA_INVALID</Alias>
                <Comment>la invalid</Comment>
            </ValuesItem>
            <ValuesDefault>
                <Comment>lac</Comment>
            </ValuesDefault>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_v_stop_ccch</Name>
                <Comment>values for v_stop_ccch</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>DONT_STOP_CCCH</Alias>
                <Comment>Don't stop CCCH</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>STOP_CCCH</Alias>
                <Comment>Stop CCCH</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>INVALID_MSG</Alias>
                <Comment>The message was not assigned to MS</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">3</Value>
                <Alias>TASK_STOP_DUMMY_VALUE</Alias>
                <Comment>Dummy value, only used for GRR internal purposes</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_rxlev</Name>
                <Comment>values for rxlev</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">80</Value>
                <Alias>RRGRR_INVALID_RXLEV</Alias>
                <Comment>receive signal strength level not present</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_idx</Name>
                <Comment>values for idx</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>RRGRR_INVALID_IDX</Alias>
                <Comment>index not present</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_state</Name>
                <Comment>values for state</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>TASK_STATE_PIM</Alias>
                <Comment>Packet Idle Mode</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>TASK_STATE_PAM</Alias>
                <Comment>Packet Access Mode</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>TASK_STATE_PTM</Alias>
                <Comment>Packet Transfer Mode</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_cell_bar_access_2</Name>
                <Comment>values for cell_bar_access_2</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>CBA_2_NORMAL</Alias>
                <Comment>Status for cell reselection is set to normal</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>CBA_2_BARRED</Alias>
                <Comment>Status for cell reselection is set to barred</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_exc_acc</Name>
                <Comment>values for exc_acc</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>EXC_ACC_NORMAL</Alias>
                <Comment>Status for cell selection and reselection is set to normal</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>EXC_ACC_LIMITED</Alias>
                <Comment>The MS is only allowed to camp on the cell for limited service</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_same_ra_as_serving_cell</Name>
                <Comment>values for same_ra_as_serving_cell</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>DIFFERENT_RA_AS_SCELL</Alias>
                <Comment>The cell is in a routing area different from the serving cell</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SAME_RA_AS_SCELL</Alias>
                <Comment>The cell is in the same routing area as the serving cell</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_gprs_reselect_offset</Name>
                <Comment>values for gprs_reselect_offset</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">10</Value>
                <Alias>GPRS_RESEL_OFF_DEFAULT</Alias>
                <Comment>Default value (0 dB)</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_RESEL_OFF_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>31</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_gprs_rxlev_access_min</Name>
                <Comment>values for gprs_rxlev_access_min</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_RXLEV_ACCESS_MIN_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>63</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_gprs_ms_txpwr_max_cch</Name>
                <Comment>values for gprs_ms_txpwr_max_cch</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_MS_TXPWR_MAX_CCH_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>31</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_gprs_temporary_offset</Name>
                <Comment>values for gprs_temporary_offset</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_TEMPORARY_OFFSET_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>7</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_gprs_penalty_time</Name>
                <Comment>values for gprs_penalty_time</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_PENALTY_TIME_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>31</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_priority_class</Name>
                <Comment>values for priority_class</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_PRIORITY_CLASS_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>7</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_hcs_thr</Name>
                <Comment>values for hcs_thr</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>GPRS_HCS_THR_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>31</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_si13_location</Name>
                <Comment>values for si13_location</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SI13_LOC_BCCH_NORM</Alias>
                <Comment>SYSTEM INFORMATION TYPE 13 message is sent on BCCH norm</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SI13_LOC_BCCH_EXT</Alias>
                <Comment>SYSTEM INFORMATION TYPE 13 message is sent on BCCH ext</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>SI13_LOC_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_pbcch_location</Name>
                <Comment>values for pbcch_location</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>PBCCH_LOC_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>3</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_psi1_repeat_period</Name>
                <Comment>values for psi1_repeat_period</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">FF</Value>
                <Alias>PSI1_RPT_PRD_INVALID</Alias>
                <Comment>This value is used to indicate the absence of this parameter</Comment>
            </ValuesItem>
            <ValuesRange ValueType="DEC">
                <MinValue>0</MinValue>
                <MaxValue>15</MaxValue>
                <Comment>Value range of parameter</Comment>
            </ValuesRange>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_nc_mode</Name>
                <Comment>values for nc_mode</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>NC2_NOT_USED</Alias>
                <Comment>allow cell reselection</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>NC2_USED</Alias>
                <Comment>inhibit cell reselection</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>NC_MODE_RESET</Alias>
                <Comment>NC is reset to default</Comment>
            </ValuesItem>
            <History>
                <Date Day="28" Month="11" Year="2003"/>
                <Author>doc2XML</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">To send the Measurement report request to RR </XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_meas_cause</Name>
                <Comment>values for meas cause</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">0</Value>
                <Alias>NC_STOP_MEAS</Alias>
                <Comment> Stop the meas report</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">1</Value>
                <Alias>NC_START_MEAS</Alias>
                <Comment>Start Averaging of measurements</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">2</Value>
                <Alias>NC_REPORT_MEAS</Alias>
                <Comment>get the meas report from RR</Comment>
            </ValuesItem>
            <History>
                <Date Day="16" Month="08" Year="2004"/>
                <Author>nram</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION"/>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_sync_type</Name>
                <Comment>Reconfirm Sync Timer status</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>SYNC_INITIAL</Alias>
                <Comment>Sync request for new carrier</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>SYNC_RECONFIRM</Alias>
                <Comment>Reconfirm 10 sec Timer Expired</Comment>
            </ValuesItem>
            <History>
                <Date Day="11" Month="01" Year="2006"/>
                <Author>xjohnrak</Author>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">This parameter is used for measurements - SACCH rate reporting or Reduced reporting rate.</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>VAL_rep_rate</Name>
                <Comment>Values for reporting rate</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>NORMAL_REP_RATE</Alias>
                <Comment>Normal(SACCH)reporting rate</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>REDUCED_REP_RATE</Alias>
                <Comment>Reduced reporting rate</Comment>
            </ValuesItem>
            <History>
                <Date Day="24" Month="10" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Values for Invalid BSIC reporting.</XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>Val_inv_bsic</Name>
                <Comment>Invalid BSIC reporting</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>INV_BSIC_REPORTING_DISABLED</Alias>
                <Comment>Invalid BSIC reporting not enabled</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>INV_BSIC_REPORTING_ENABLED</Alias>
                <Comment>Invalid BSIC reporting not enabled</Comment>
            </ValuesItem>
            <History>
                <Date Day="24" Month="10" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION">Scaling order values as indicated by NW </XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>Val_scale_ord</Name>
                <Comment>scale order</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="HEX">00</Value>
                <Alias>SCALE_0dB</Alias>
                <Comment>Scaling by 0dB</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">01</Value>
                <Alias>SCALE_10dB</Alias>
                <Comment>Scaling by 10dB</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="HEX">02</Value>
                <Alias>SCALE_AUTO</Alias>
                <Comment>Automatic scaling</Comment>
            </ValuesItem>
            <History>
                <Date Day="24" Month="10" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </Values>
        <Values>
            <Description>
                <DocElement>
                    <XHTMLElement Type="TEXT_SECTION"> Values for Network control order. </XHTMLElement>
                </DocElement>
            </Description>
            <ValuesDef>
                <Name>Val_nco</Name>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Values</Comment>
            </ValuesDef>
            <ValuesItem>
                <Value ValueType="DEC">0</Value>
                <Alias>NCO_NC0</Alias>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Values Item</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">1</Value>
                <Alias>NCO_NC1</Alias>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Values Item</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">2</Value>
                <Alias>NCO_NC2</Alias>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Values Item</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">3</Value>
                <Alias>NCO_RESET</Alias>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Values Item</Comment>
            </ValuesItem>
            <ValuesItem>
                <Value ValueType="DEC">4</Value>
                <Alias>NCO_EMPTY</Alias>
                <Version>REL99 AND TI_PS_FF_EMR</Version>
                <Comment>Values Item</Comment>
            </ValuesItem>
            <History>
                <Date Day="25" Month="10" Year="2006"/>
                <Author/>
                <Comment>Initial</Comment>
            </History>
        </Values>
    </ValuesSection>
</SAP>