view components/alr-sotovik @ 680:ee3ac8c617cb

armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents 30203d5aeb74
children
line wrap: on
line source

# Building alr.lib from the ALR source we got
# with our copy of TCS211 from Sotovik

CFLAGS="-me -mt -o -pw2 -x -mw"
CPPFLAGS=

make_version alr
cfile_plain alr_version.c

# Defines

CPPFLAGS=-DCCDTABLES_EXTERN
CPPFLAGS="$CPPFLAGS -DOPTION_MULTITHREAD"
CPPFLAGS="$CPPFLAGS -DNEW_FRAME"
CPPFLAGS="$CPPFLAGS -DNEW_ENTITY"
CPPFLAGS="$CPPFLAGS -D_TARGET_"
CPPFLAGS="$CPPFLAGS -DSHARED_VSI"
CPPFLAGS="$CPPFLAGS -DALR"
CPPFLAGS="$CPPFLAGS -DFF_HOMEZONE"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SAT_ICON"
CPPFLAGS="$CPPFLAGS -DFF_MMI_SMS_DYNAMIC"
CPPFLAGS="$CPPFLAGS -DFF_CPHS"
CPPFLAGS="$CPPFLAGS -D_TMS470"
CPPFLAGS="$CPPFLAGS -DUART"
CPPFLAGS="$CPPFLAGS -DFF_ATI"
CPPFLAGS="$CPPFLAGS -DFF_EM_MODE"
CPPFLAGS="$CPPFLAGS -DAT_INTERPRETER"
CPPFLAGS="$CPPFLAGS -DUSE_L1FD_FUNC_INTERFACE"

if [ "$SRVC" != 0 ]
then
	CPPFLAGS="$CPPFLAGS -DFAX_AND_DATA"
	if [ "$SRVC" = 1 ]
	then
		CPPFLAGS="$CPPFLAGS -DFF_FAX"
	fi
	CPPFLAGS="$CPPFLAGS -DUSE_L2FD_FUNC_INTERFACE"
fi

CPPFLAGS="$CPPFLAGS -DSRVC=$SRVC"
CPPFLAGS="$CPPFLAGS -DMMI=$MMI"

if [ "$MMI" = 0 ]
then
	CPPFLAGS="$CPPFLAGS -DACI"
elif [ "$MMI" = 2 ]
then
	CPPFLAGS="$CPPFLAGS -DMFW"
fi

CPPFLAGS="$CPPFLAGS -DPHONEBOOK_EXTENSION"

if [ "$GPRS" = 1 ]
then
	CPPFLAGS="$CPPFLAGS -DGPRS"
fi

CPPFLAGS="$CPPFLAGS -DHAS_FLASH_EPROM"
CPPFLAGS="$CPPFLAGS -DFF_MULTIBAND"
CPPFLAGS="$CPPFLAGS -DALR=1"
CPPFLAGS="$CPPFLAGS -DCHIPSET=$CHIPSET"
CPPFLAGS="$CPPFLAGS -DNWARN"

# Includes

SRCDIR=$SRC/aci2/alr

CPPFLAGS="$CPPFLAGS -I$SRC/$CONDAT/com/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$CONDAT/com/include"
CPPFLAGS="$CPPFLAGS -I../../$CDGINC"
CPPFLAGS="$CPPFLAGS -I$SRCDIR"
CPPFLAGS="$CPPFLAGS -I.."
CPPFLAGS="$CPPFLAGS -I../config"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/system"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/services"

# Source modules

cfile_str2ind $SRCDIR/alr_cs.c
cfile_str2ind $SRCDIR/alr_csf.c
cfile_str2ind $SRCDIR/alr_main.c
cfile_str2ind $SRCDIR/alr_nc.c
cfile_str2ind $SRCDIR/alr_pch.c
cfile_str2ind $SRCDIR/alr_pei.c
cfile_str2ind $SRCDIR/alr_rach.c
cfile_str2ind $SRCDIR/alr_sc.c
cfile_str2ind $SRCDIR/alr_dedi.c
cfile_str2ind $SRCDIR/alr_mmi.c
cfile_str2ind $SRCDIR/alr_cbch.c
cfile_str2ind $SRCDIR/alr_trc.c
cfile_str2ind $SRCDIR/alr_tim.c
cfile_str2ind $SRCDIR/alr_em.c

if [ "$GPRS" = 1 ]
then
	cfile_str2ind $SRCDIR/alr_gprs.c
fi