FreeCalypso > hg > fc-magnetite

view components/audio @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents 838eeafb0051
children
line wrap: on
line source

# Building audio.lib

CFLAGS="-mn -mt -mw -me -pw2"
CPPFLAGS="-DTOOL_CHOICE=0 -D_TMS470"

# Includes

CPPFLAGS="$CPPFLAGS -I$SRC/cs/os/nucleus"
CPPFLAGS="$CPPFLAGS -I.."
CPPFLAGS="$CPPFLAGS -I../config"
CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/frame/cust_os"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/system"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rv"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/services"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/audio_cust0"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/audio_include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/cust0"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/hmacs"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/p_include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tm_include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tm_cust0"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/dyn_dwl_include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/include"
CPPFLAGS="$CPPFLAGS -I$SRC/cs/services/audio"

# Source modules

SRCDIR=$SRC/cs/services/audio

cfile_plain $SRCDIR/audio_env.c
cfile_plain $SRCDIR/audio_api.c
cfile_plain $SRCDIR/audio_error_hdlr.c
cfile_plain $SRCDIR/audio_task.c
cfile_plain $SRCDIR/audio_keybeep.c
cfile_plain $SRCDIR/audio_tones.c
cfile_plain $SRCDIR/audio_melody_E1.c
cfile_plain $SRCDIR/audio_melody_E2.c
cfile_plain $SRCDIR/audio_ffs.c
cfile_plain $SRCDIR/audio_vm.c
cfile_plain $SRCDIR/audio_vm_play.c
cfile_plain $SRCDIR/audio_vm_record.c
cfile_plain $SRCDIR/audio_compatibilities.c
cfile_plain $SRCDIR/audio_sr_enroll.c
cfile_plain $SRCDIR/audio_sr_update.c
cfile_plain $SRCDIR/audio_sr_reco.c
cfile_plain $SRCDIR/audio_sr.c
cfile_plain $SRCDIR/audio_mode.c
cfile_plain $SRCDIR/audio_mode_full_write.c
cfile_plain $SRCDIR/audio_mode_load.c
cfile_plain $SRCDIR/audio_mode_save.c
cfile_plain $SRCDIR/audio_mode_drivers.c
cfile_plain $SRCDIR/audio_mode_volume.c
cfile_plain $SRCDIR/audio_midi.c
cfile_plain $SRCDIR/audio_vm_amr.c
cfile_plain $SRCDIR/audio_vm_amr_play.c
cfile_plain $SRCDIR/audio_vm_amr_record.c
cfile_plain $SRCDIR/audio_driver.c