FreeCalypso > hg > fc-magnetite
view src/aci2/mfw/mfw_simi.h @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT: GSM-MFW (?) $Workfile:: mfw_simi.h $| | $Author:: Vo $Revision:: 1 $| | CREATED: 14.10.98 $Modtime:: 20.03.00 11:48 $| | STATE : code | +--------------------------------------------------------------------+ PURPOSE : Internal definitions for SIM management of MMI framework */ #ifndef DEF_MFW_SIMI_HEADER #define DEF_MFW_SIMI_HEADER #include "message.h" #include "prim.h" #include "aci_cmh.h" #define NO_ALLOCATED 0 #define ALLOCATED_AND_DEACTIVATED 2 #define ALLOCATED_AND_ACTIVATED 3 #define SIM_UBLK_ERROR 0 #define SIM_UBLK_OK 1 #define SIM_PIN2_FAILURE 17 #define SIM_PUK2_FAILURE 18 #define MFW_LEN_PLMN_NTRY 3 /* SIM configuration information */ typedef struct { UBYTE deper_key [16]; UBYTE phase; UBYTE oper_mode; /* SIM card functionality */ UBYTE pref_lang[5]; UBYTE access_acm; UBYTE access_acmmax; UBYTE access_puct; UBYTE sim_gidl1[5]; UBYTE sim_gidl2[5]; } T_MFW_SIM_CONFIG; /* * SIM Control Block */ typedef struct { T_MFW_EVENT emask; /* events of interest */ T_MFW_EVENT event; /* current event */ T_MFW_CB handler; T_MFW_SIM_PARA para; } T_MFW_SIM; EXTERN T_MFW_HND sim_install (T_MFW_HDR *w, T_MFW_HDR *h, T_MFW_SIM *sim); EXTERN T_MFW_RES sim_remove (T_MFW_HDR *h); EXTERN int sim_sign_exec (T_MFW_HDR * hdr, T_MFW_EVENT event, T_MFW_SIM_PARA *para); EXTERN void sim_spn_req (void); EXTERN void sim_ok_cfun (void); EXTERN void sim_error_cfun (UBYTE reason); EXTERN void sim_ok_cpin (void); EXTERN void sim_error_cpin (T_ACI_CME_ERR reason); EXTERN void sim_ok_cpinc (void); EXTERN void sim_error_cpinc (void); EXTERN void sim_ok_cpind (void); EXTERN void sim_error_cpind (void); EXTERN void sim_ok_cpine (void); EXTERN void sim_error_cpine (void); EXTERN UBYTE sim_check_service (UBYTE nr, UBYTE * serv_table); EXTERN T_MFW sim_status_check (void); EXTERN void decode_imsi (UBYTE simlck[], UBYTE imsi_id[LONG_NAME]); EXTERN void sim_mmi_parameter (T_SIM_ACTIVATE_CNF *sim_activate_cnf); EXTERN void sim_ss_unblock (UBYTE result, T_ACI_CME_ERR reason); EXTERN void sim_simlock_timeout (void); EXTERN T_MFW sim_simlock_status (UBYTE status); EXTERN UBYTE sim_cvtPINstatus (T_ACI_PVRF_STAT ps, UBYTE type); EXTERN void sim_gid1_cnf (SHORT error, UBYTE *data); EXTERN void sim_gid2_cnf (SHORT error, UBYTE *data); EXTERN void sim_pin_ident (UBYTE id); EXTERN T_MFW sim_check_imsi_digit (UBYTE pcm_imsi, UBYTE sim_imsi); EXTERN void sim_mmi_update_parameter(T_SIM_ACTIVATE_IND *sim_act_ind); EXTERN void sim_sat_file_update (USHORT dataId); EXTERN void sim_read_sst_cnf (SHORT error, UBYTE *data); EXTERN void sim_read_lp_cnf (SHORT error, T_ACI_LAN_SUP *CLang); #endif