FreeCalypso > hg > fc-magnetite

view src/gpf2/misc/makefile @ 680:ee3ac8c617cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: set GPIO2 output high initially On TI-canonical platforms GPIO2 is DCD modem control output. In TI's original code the AI_InitIOConfig() function called from Init_Target() would configure GPIO2 as an output and set the initial output value to low, but then the init code in uartfax.c called from Init_Serial_Flows() would immediately change it to high, corresponding to DCD not asserted. The result is a momentary asserted-state glitch on the DCD output. The present change eliminates this glitch, setting DCD output to not-asserted initially like it should be.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 25 Jun 2020 03:17:43 +0000
parents cd37d228dae0
children
line wrap: on
line source

#######################  Makefile for GNU make    #####################
#
#           makefile to build misc.lib
#
#           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
#           targets:
#
#           misc.lib       functions which belong neither to frame nor to tif, somehow old files
#           clean          delete temp files
#
#######################################################################

OWN_MAKELEVEL=0


VPATH=$(OBJDIR)

#---------- Directories

ifeq ($(TARGET), nuc)
  ifeq ($(RUN_FLASH), 1)
    SECTION:=/fl
  endif

  ifeq ($(RUN_INT_RAM), 1)
    SECTION:=/ir
  endif
else
  SECTION:=
endif

ifdef TOOL_CHOICE
  TS:=/ts$(TOOL_CHOICE)
  tsTail  :=_ts$(TOOL_CHOICE)
else
  TS:=
endif

ifdef PATH_CC_1_22E 
 PATH:=$(PATH_CC_1_22E);$(PATH)
 C_DIR:=$(PATH_CC_1_22E)
endif

ifeq ($(TOOL_CHOICE), 3)
 COPTS= --align_structs=4 -pden -o -q
 ifndef PATH_CC_2_54 
   PATH_CC_2_54=C:/Dvpt_tools/Codegen/TMS4701x_2.54
   C_DIR=PATH_CC_2_54
 endif
 Path:=$(PATH_CC_2_54)/bin;$(Path)
 INCLUDES += -I"$(PATH_CC_2_54)/include"
endif

ifeq ($(TOOL_CHOICE), 5)
 COPTS= --align_structs=4 -pden -o -q
 ifndef PATH_CC_2_55 
   PATH_CC_2_55=C:\Dvpt_tools\Codegen\TMS4701x_2.55
#  C_DIR=PATH_CC_2_55
 endif
 Path:=$(PATH_CC_2_55)/bin;$(Path)
 INCLUDES += -I"$(PATH_CC_2_55)/include"
endif

ifeq ($(TOOL_CHOICE), 6)
  # --code_state=16 => -mt
  # --endian=little => -me
  # what is -ml?
  COPTS= -mv=5e --abi=ti_arm9_abi
  COPTS+= -pden -pdv -mf -ms -qq -disable_branch_chaining -pi
  COPTS+= -O=2
  ifndef PATH_CC_4_11 
    PATH_CC_4_11=C:\Dvpt_tools\Codegen\TMS4701x_4.11
#   C_DIR=PATH_CC_4_11
  endif
  Path:=$(PATH_CC_4_11)/bin;$(Path)
  INCLUDES += -I"$(PATH_CC_4_11)/include"
endif

ifeq "$(CLEARCASE_PRIMARY_GROUP)" ""
  CLRCAS=0
else
  ifeq "$(IN_VOB)" "FALSE"
    CLRCAS=0
  else
    CLRCAS=1
  endif
endif

ifeq ($(CLRCAS), 1)
  CHECKOUT = -cleartool co -nc
  CHECKIN = -cleartool ci -nc
else
  CHECKOUT = attrib -r
  CHECKIN = attrib +r
endif

# for created object files
# general directories
GPFDIR=..
INCDIR=../inc
ifeq ($(TARGET), nuc)
  OBJDIR=obj/$(TARGET)/$(PLATFORM)$(DB)$(PS)$(SECTION)$(TS)
else
  OBJDIR=obj/$(TARGET)$(DB)$(PS)
endif

# for stack calculation
GAWK=../tools/bin/gawk.exe
AWK_PROG=../BIN/cg$(tTail).awk

# Lint
LINT=lint-nt.exe
LINT_INC=-i/gpf/template/lint/
LINT_OPT_FILE=/gpf/template/lint/options.lnt

# for created libraries
ifeq ($(TARGET), win32)
  LIBDIR=../LIB/WIN32$(DEBUGDIR)
  BINDIR=../BIN$(DEBUGDIR)
else
  LIBDIR=../LIB
endif

#-------------------------globaly exported header files
INC_FILES=Tools.h

#-------------------------Suffixes for the name of the output file
#---------e.g. misc_tr_db.lib

ifeq ($(RUN_FLASH), 1)
   flTail :=_fl
else
   flTail:=
endif

ifeq ($(RUN_INT_RAM), 1)
   irTail :=_ir
else
   irTail:=
endif

ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), arm7)
    tTail :=_na7
  else
    ifeq ($(PLATFORM), arm9)
      tTail :=_na9
    else
      ifeq ($(PLATFORM), pc)
        tTail :=_npc
      endif
    endif
  endif
else
  ifeq ($(TARGET), nuc_ARM)
    tTail :=_ar
  else
    ifeq ($(TARGET), win32)
      tTail :=
    else
      ifeq ($(TARGET), psos)
        tTail :=_po
      else
   	ifeq ($(TARGET), vxworks)
	  tTail :=_vx
    	  ifeq ($(TOOL), gnu)
	    tlTail :=_gn
          else
	    tlTail :=_di
	  endif
    	  ifeq ($(CPU), PPC603)
	    cpTail :=_pp
	  endif
        else
          ifeq ($(TARGET), linuxpc)
            tTail :=_lpc
            OSENV=sus
            NO_LINT=1
          else
            ifeq ($(TARGET), rtlpc)
              tTail :=_rlp
              OSENV=sus
              NO_LINT=1
	      RTL_VERSION=2.0
	      RTL_DIR=/opt/rtldk-$(RTL_VERSION)/rtlinuxpro
	      include $(RTL_DIR)/rtl.mk
            else
              ifeq ($(TARGET), linuxarm)
                tTail :=_la9
                OSENV=sus
                NO_LINT=1
	      else
                ifeq ($(TARGET), solsparc)
                  tTail :=_ssp
                  OSENV=sus
                  NO_LINT=1
                endif
              endif
            endif
          endif
	endif
      endif
    endif
  endif
endif

ifeq ($(DEBUG), 1)
   DB=/db
   ifeq ($(TARGET), win32)
     DEBUGDIR=/debug
     dbTail :=
   else
     dbTail :=_db
   endif
else
   dbTail:=
   DB=
endif

XXX:=$(tTail)$(tlTail)$(cpTail)$(dbTail)$(irTail)$(flTail)$(tsTail)

_MISC_OBJS=printtofile.$(OBJTAIL) tok.$(OBJTAIL) tools.$(OBJTAIL) misc_version.$(OBJTAIL)

ifeq ($(OSENV), sus)
  MKDIR           = mkdir
else
  MKDIR           = gmkdir
endif
COPY            = cp
CLEARTOOL		= cleartool
ECHO			= @echo

#---------- Special settings for each target: for Nucleus
ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), arm7)

    ifeq ($(TOOL_CHOICE), )
     COPTS+= -mw -x -pw2 -q -o
    endif

    CC=cl470
    COPTS+= -me -mt

    ifeq ($(DEBUG), 1)
      ifeq ($(TOOL_CHOICE), )
        COPTS += -g
      else
        COPTS += -gt
      endif
      COPTS += -mn   
    endif

    ifeq ($(ASM_ONLY), 1)
      COPTS+= -q -n -x0 -fs $(OBJDIR) 
      MKLIB = $(GAWK) -f $(AWK_PROG) > $(MISC_LIB)
      OBJTAIL = asm
      MISC_LIB = $(OBJDIR)/misc$(XXX).pa
    else
      OBJTAIL = obj
      MKLIB=ar470  $(LFLAGS)
      MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)
      LINT_OPTS = $(LINT_INC) -I"$(subst \,/,$(C_DIR))" -u $(LINT_OPT_FILE)

    endif

    COPTS += -fr $(OBJDIR) -c

    ifeq ($(RUN_INT_RAM), 1)
      COPTS += -dRUN_INT_RAM
    endif

    ifeq ($(RUN_FLASH), 1)
      COPTS += -dRUN_FLASH
    endif

    INCLUDES+= -I"." -I"..\inc\NUC" -I"..\inc\NUC\ARM7" -I"..\inc"

    DEFINES += -d_TARGET_ -d_NUCLEUS_
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) # because of CDGINCDIR above
    DEFINELIST=$(subst -d,-D,$(DEFINES))
    COMMLFLAGS = -rq $@      # only one command is allowed and it is "r" for replace
    LFLAGS=$(COMMLFLAGS)
    LIBEXT=lib

    clean:
		@$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(SECTION)$(TS)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

  endif
endif         # nucleus & arm7

ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), arm9)

    CC=cl470

    COPTS+= -me -mt

    ifeq ($(DEBUG), 1)
      ifeq ($(TOOL_CHOICE), 6)
        COPTS += --symdebug:coff
      else
        # toolset 3 and 5
        COPTS += -gt
      endif
      COPTS += -mn   
    endif

    LINT_OPTS = $(LINT_INC) -I"$(subst \,/,$(C_DIR))" -u $(LINT_OPT_FILE)

    COPTS += -fr $(OBJDIR) -c

    ifeq ($(RUN_INT_RAM), 1)
      COPTS += -dRUN_INT_RAM
    endif

    ifeq ($(RUN_FLASH), 1)
      COPTS += -dRUN_FLASH
    endif

    INCLUDES+= -I"." -I"..\INC\NUC" -I"..\INC\NUC\ARM9" -I"..\INC"
    MKLIB=ar470 $(LFLAGS)
 
    DEFINES += -d_TARGET_ -d_NUCLEUS_
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) # because of CDGINCDIR above
    DEFINELIST=$(subst -d,-D,$(DEFINES))
    COMMLFLAGS = -rq $@      # only one command is allowed and it is "r" for replace
    LFLAGS=$(COMMLFLAGS)
    LIBEXT=lib
    OBJTAIL=obj
    MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

    clean:
		@$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(SECTION)$(TS)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

  endif
endif         # nucleus & arm9


#---------- Special settings for each target: for Nucleus_ARM
ifeq ($(TARGET), nuc_ARM)

   CC=perl "\G23M\Condat\INT\BIN\gti_compile.pl"
   COPTS= -me -mt -pw2 -q  -x -mw -o  # from condat_env.mak and os.mak for nucleus.lib

   ifeq ($(DEBUG), 1)
      COPTS += -g -mn
   endif
   COPTS += -fr $(OBJDIR) -fo $(OBJDIR)/$@ -c


#new    INCLUDES+= -I"..\inc\NUC" -I"..\inc\NUC\ARM7" -I"..\inc"
    INCLUDES+= -I"..\inc\NUC" -I"..\inc"
    DEFINES += -d_TARGET_ -d_NUCLEUS_
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) # because of CDGINCDIR above
    DEFINELIST=$(subst -d,-D,$(DEFINES))

   COMMLFLAGS = -rq $@      # only one command is allowed and it is "r" for replace
   LFLAGS=$(COMMLFLAGS)
   MKLIB=perl "\G23M\Condat\INT\BIN\gti_archive.pl" $(LFLAGS)
   LIBEXT=lib
   OBJTAIL=obj
   MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

    clean:
		@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

endif         # target: nucleus_ARM


#---------- Special settings for each target: for NucWin
ifeq ($(TARGET), nuc)
  ifeq ($(PLATFORM), pc)

    CC=cl
    COPTS += /c /nologo /W3 /GX /Zp1 /GZ

    ifeq ($(DEBUG), 1)
      COPTS += /MD /DEBUG  /Z7
      DEFINES += -D"_DEBUG"
    else
      COPTS += /MT
    endif

    COPTS += /FR"..\temp\nucwin"  /Fd"..\temp\nucwin" /Fo./$(OBJDIR)/

    INCLUDES += -I"..\inc\NUC" -I"..\inc\NUC\PC" -I"..\inc" \
                -I"$(GSMDIR)\CDGINC\cdginc_fd"

    DEFINES += -D"_NUCLEUS_"
    COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
    LINT_OPT_FILE += co-msc50.lnt
    LINT_OPTS = $(LINT_INC) -D_M_IX86 -I"NUC" -u $(LINT_OPT_FILE)
    INCLUDELIST=$(subst /I ,-I,$(INCLUDES))
    DEFINELIST=$(subst /D ,-D,$(DEFINES))
    COMMLFLAGS =  /nologo  /subsystem:console  /machine:I386

    LFLAGS=$(COMMLFLAGS)
    MKLIB=LIB /out:$@ $(LFLAGS)
    LIBEXT=lib
    OBJTAIL=obj
    MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

    clean:
		@$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

  endif
endif         # nucleus & pc



#---------- Special settings for each target: for Win32
ifeq ($(TARGET), win32)

   FRAMEXXX:=$(tTail)$(trTail)$(rtTail)$(dbTail)$(msTail)
   CC=cl
   COPTS += /c /nologo /W3 /GX /Zp1 /GZ

   COPTS += /FR"..\temp\win32"  /Fd"..\temp\win32" /Fo./$(OBJDIR)/

   INCLUDES += -I"..\inc\WIN32" -I"..\inc"

   INCLUDES += -I"..\lib\win32"

   LINT_OPT_FILE += co-msc50.lnt
   LINT_OPTS = $(LINT_INC) -D_WIN32 -D_M_IX86 -D_MSC_VER -I"WIN32" -u $(LINT_OPT_FILE)

   DLLFLAGS= /dll /implib:"$(LIBDIR)/misc$(XXX).lib" /def:"misc.def"

   COMMLFLAGS = $(DLLFLAGS)
   COMMLFLAGS += /nologo

   ifeq ($(DEBUG), 1)
     DEFINES += -D"_DEBUG"
     COPTS += /DEBUG /MDd /Zi
     COMMLFLAGS += /DEBUG /incremental:no /pdb:none
   else
     COPTS += /MD
   endif

   DEFINES += -D"_TOOLS_"
   COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES)
   INCLUDELIST=$(subst /I ,-I,$(INCLUDES))
   DEFINELIST=$(subst /D ,-D,$(DEFINES))

   LFLAGS=$(COMMLFLAGS)
   MKLIB=link.exe /out:$@ $(LFLAGS)
   LIBEXT = dll
   OBJTAIL=obj
   IMPLIB=$(LIBDIR)/misc$(XXX).lib
   MISC_LIB=$(BINDIR)/misc$(XXX).$(LIBEXT)


   clean:
	    $(RM) $(OBJDIR)/*.$(OBJTAIL)
	    $(RM) $(IMPLIB) $(MISC_LIB)


endif         # target: win32



#---------- Special settings for each target: for pSOS+
ifeq ($(TARGET), psos)

   CC=cc386
   COPTS_FILE:=c.opt

   -include $(PSS_BSP)/bsp.mk# board support settings e.g. MODEL, FPU

   ifeq ( FPU,H )
      FPUOPT = -VNDP
   else
      FPUOPT=
   endif

   COPTS1  =       -c -V$(MODEL) -VROM -VBSS -VANSI -VLONGNAME -VSPROTO -VQUIET -VDIAGNOSTICS
   COPTS2  =       $(FPUOPT)
   COPTS3  =       -I. -I$(PSS_ROOT)/include -I$(PSS_BSP)
   COPTS4  =        -I./ -I../inc/ -I../inc/psos/
   COPTS5  =       -DMODEL=$(MODEL) -VNOSIGNEDCHAR -D__CADUL__=1 -DPSOS=1 -D_PSOS_

   ifeq ($(DEBUG), 1)
      COPTS5 += -VXDB
   endif


   COPTS   =       @c.opt
   COPTS += -o $(OBJDIR)/$@
   COPTSNF = $(COPTS)
   LIBEXT = lib
   OBJTAIL=obj
   MKLIB= lib386 $@         # psos related libs will not be included here
   MISC_LIB=$(LIBDIR)/misc$(XXX).$(LIBEXT)

c.opt:  makefile
	@echo $(COPTS1) >  c.opt
	@echo $(COPTS2) >> c.opt
	@echo $(COPTS3) >> c.opt
	@echo $(COPTS4) >> c.opt
	@echo $(COPTS5) >> c.opt

   clean:
	@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
	@$(RM) $(MISC_LIB)
	@$(RM) *.opt

endif         # target: psos

#---------- Special settings for each target: for VxWorks GNU
ifeq ($(TARGET), vxworks)

    CC = ccppc

  ifeq ($(DEBUG), 1)
    COPTSNF  = -g
  else
    COPTSNF  = -O2
  endif
    COPTSNF += -c -mstrict-align -ansi -nostdinc -DRW_MULTI_THREAD -D_REENTRANT \
               -fvolatile -fno-builtin -fno-for-scope -DCPU=$(CPU) \
               -I$(WIND_BASE)/target/h -I. -I../inc -I../inc/$(TARGET) \
               -D_VXWORKS_

    COPTSNF += -o $(OBJDIR)/$@
    LIBEXT   = a
    OBJTAIL=obj
    MISC_LIB = $(LIBDIR)/misc$(XXX).$(LIBEXT)
    MKLIB      = arppc crus $(MISC_LIB)

  clean:
		@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)

endif
# target: vxworks

#---------- Special settings sus environment
ifeq ($(OSENV), sus)
   COPTS += -c -o$(OBJDIR)/$@
   INCLUDES += -I../inc/$(OSENV) -I../inc -I../FRAME -I../FRAME/$(OSENV) -I.
   INCLUDES +=  -I../CCD
   ifeq ($(MEMSUPER), 2)
     DEFINES += -DMEMORY_SUPERVISION -DOPTIMIZE_POOL
   endif
   ifeq ($(MEMSUPER), 1)
     DEFINES += -DMEMORY_SUPERVISION
   endif
   # the following should be adapted for other unix-like systems

   DEFINES += -DSHARED_VSI -DNEW_FRAME
   OBJTAIL = o
   LIBEXT= a
   ifeq ($(TARGET), rtlpc)
     DEFINES += -D_LINUX_
     COPTSNF = $(CFLAGS)
     MKLIB= i386-linux-ar ruv $@
     RANLIB= i386-linux-ranlib
     DEFINES += -D_RT_LINUX_
   else
     ifeq ($(TARGET), linuxarm)
       DEFINES += -D_LINUX_
       CC=arm-linux-gcc
       MKLIB= arm-linux-ar ruv $@
       RANLIB= arm-linux-ranlib
       DEFINES += -DGSP_TARGET
     else
       ifeq ($(TARGET), solsparc)
         DEFINES += -D_SOLARIS_
         CC=gcc
         MKLIB= ar ruv $@
         RANLIB= ranlib
       else
         DEFINES += -D_LINUX_
         CC=gcc
         MKLIB= ar ruv $@
         RANLIB= ranlib
       endif
     endif
   endif
   COPTSNF += $(COPTS) $(DEFINES) $(INCLUDES)
   MISC_LIB = $(LIBDIR)/libmisc$(XXX).$(LIBEXT)
   MKLIB= ar ruv $@
  clean:
		@$(RM) obj/$(TARGET)$(DB)/*.$(OBJTAIL)
		@$(RM) $(MISC_LIB)
endif

#########################  misc.lib    ##################################

MISC_OBJS=$(patsubst %.$(OBJTAIL),$(OBJDIR)/%.$(OBJTAIL),$(_MISC_OBJS))

asm: $(MISC_LIB) $(OBJDIR)

misc.$(LIBEXT): $(MISC_LIB)

$(OBJDIR) :
	$(MKDIR) -p $(OBJDIR)

$(MISC_LIB) : $(OBJDIR) $(COPTS_FILE) $(_MISC_OBJS)  makefile
#  OWN_MAKELEVEL == 0 if makefile called directly, == 1 if nested
ifneq ($(OWN_MAKELEVEL), 0)
	@echo checking out and touching using $(MAKE)
	$(CHECKOUT) $@ $(IMPLIB)
	touch -c $@ $(IMPLIB)
else
	gnumake MAKE=gnumake OWN_MAKELEVEL=1 $(subst \,/,$@ $<)
	@echo proceeding using $(MAKE)
	$(MKLIB)  $(MISC_OBJS)
  ifeq ($(OSENV), sus)
		$(RANLIB) $@
  endif
endif

$(_MISC_OBJS): %.$(OBJTAIL):	%.c
	$(RM) $(OBJDIR)/misc_version.$(OBJTAIL)
ifneq ($(NO_LINT), 1)
	$(LINT) $(LINT_OPTS) $(DEFINES) $(INCLUDES) $<
endif	
	$(CC) $(COPTSNF) $<

SRCFILES=$(patsubst %.$(OBJTAIL),%.c,$(_MISC_OBJS))
MISC_DEP=dep_misc_$(PROJECT)$(XXX).mk

help:
	$(ECHO) usage...
	$(ECHO) building:
	$(ECHO) "gnumake [DEBUG={1|0}] [ROUTING={1|0}] [MEMSUPER={1|0}] ..."
	$(ECHO) cleaning:
	$(ECHO) "gnumake clean [DEBUG={1|0}] [ROUTING={1|0}] [MEMSUPER={1|0}] ..."
	$(ECHO) ClearCase:
	$(ECHO) "gnumake checkin - not implemeted yet -"
	$(ECHO) "gnumake label LABEL=<label type> [FLOAT={1|0}] [DEBUG={1|0}] [ROUTING={1|0}] "
	$(ECHO) "        [MEMSUPER={1|0}] ..."
	$(ECHO) help:
	$(ECHO) "gnumake help"

DEPEND_DIRS=$(GPFDIR) $(LIBDIR) $(BINDIR) $(INCDIR)
EXPORT_FILES=$(IMPLIB) $(MISC_LIB)
INCLUDE_FILES=$(patsubst %,../inc/%,$(INC_FILES))

label:
	-$(CLEARTOOL) mklabel -recurse $(REPLACE) $(LABEL) . 2>> error.log
	-$(CLEARTOOL) mklabel $(REPLACE) $(LABEL) $(DEPEND_DIRS) \
	                      $(EXPORT_FILES) $(INCLUDE_FILES) 2>> error.log

depend: $(SRCFILES)
	@touch $(MISC_DEP)
	makedepend -b -f$(MISC_DEP) $^ -Y -o.$(OBJTAIL) $(INCLUDELIST) $(DEFINELIST)
	@$(RM) $(MISC_DEP).bak

-include $(MISC_DEP)