FreeCalypso > hg > fc-magnetite
view src/ui3/mfw/mfw_BtipsBmg.c @ 680:ee3ac8c617cb
armio.c: set GPIO2 output high initially
On TI-canonical platforms GPIO2 is DCD modem control output. In TI's
original code the AI_InitIOConfig() function called from Init_Target()
would configure GPIO2 as an output and set the initial output value to
low, but then the init code in uartfax.c called from Init_Serial_Flows()
would immediately change it to high, corresponding to DCD not asserted.
The result is a momentary asserted-state glitch on the DCD output.
The present change eliminates this glitch, setting DCD output to
not-asserted initially like it should be.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 25 Jun 2020 03:17:43 +0000 |
parents | e8ddbb0837ed |
children |
line wrap: on
line source
/* ========================================================= * Texas Instruments OMAP(TM) Platform Software * (c) Copyright Texas Instruments, Incorporated. All Rights Reserved. * * Use of this software is controlled by the terms and conditions found * in the license agreement under which this software has been supplied. * ========================================================== */ /* $Project name: Basic Bluetooth MMI $Project code: $Module: Bluetooth BMG MFW $File: Mfw_Btips.c $Revision: 1.0 $Author: Texas Instruments $Date: 26/06/07 ******************************************************************************** Description: This module provides the BTIPS BMG APPlication functionality. ******************************************************************************** $History: Mfw_Btips.c 26/06/07 Sasken original version $End *******************************************************************************/ /******************************************************************************* Include files *******************************************************************************/ #define ENTITY_MFW /* includes */ #include <string.h> #ifdef FF_MMI_BTIPS_APP /* BTIPS Includes */ #include "me.h" #include "osapi.h" #include "btl_common.h" #include "bthal_btdrv.h" #include "bthal_pm.h" #include "bttypes.h" #include "goep.h" #include "bpp.h" #include "Debug.h" /* BTL includes */ #include "btl_bmg.h" #endif #if defined (NEW_FRAME) #include "typedefs.h" #include "vsi.h" #include "pei.h" #include "custom.h" #include "gsm.h" #include "prim.h" #else #include "STDDEFS.H" #include "custom.h" #include "gsm.h" #include "vsi.h" #endif #include "mfw_mfw.h" #include "mfw_win.h" #include "mfw_icn.h" /* included for mfw_mnu.h */ #include "mfw_mnu.h" #include "mfw_tim.h" #include "mfw_kbd.h" #include "mfw_sat.h" /* included for MmiDummy.h, included for MmiMenu.h */ #include "Mfw_Btips.h" #include "Mfw_BtipsBmg.h" #ifdef FF_MMI_BTIPS_APP #define BTL_BMG_MAX_PIN_LEN 16 #define BTL_BMG_SEARCH_ALL 0 #define BTL_BMG_SEARCH_AUDIO_MAJOR 1 #define PME_APP_NAME "Locosto Phone" //extern BtlA2dpContext *btlA2dpContext ; //extern BtlFtpsContext *ftpsContext; /* Internal functions prototypes */ void btips_bmgCallback (const BtlBmgEvent *); extern UBYTE g_device_name[BT_MAX_REM_DEV_NAME]; extern BOOL g_Outgoing; static BtlBmgContext *mfwBtipsBmgContext; /*--------------------------------------------------------------------------- * mfw_btips_bmgGetDeviceName *--------------------------------------------------------------------------- * * Synopsis: Send PIN code. * * Return: TRUE if name is available. Else convert the BD_ADDR itself to a string. * */ BOOL mfw_btips_bmgGetDeviceName(const BD_ADDR *bdAddr, U8 *name) { BtStatus btStatus; BtlBmgDeviceRecord record; TRACE_FUNCTION("mfw_btips_bmgGetDeviceName"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr, &record); if(BT_STATUS_SUCCESS == btStatus) { strcpy(name, record.name); } else { bdaddr_ntoa(bdAddr, name); } return TRUE; } //26-07-07 /*--------------------------------------------------------------------------- * mfw_btips_bmgSetDeviceRecord *--------------------------------------------------------------------------- * * Synopsis: Send PIN code. * * Return: TRUE if name is available. Else convert the BD_ADDR itself to a string. * */ BOOL mfw_btips_bmgSetDeviceNameInRecord(const BD_ADDR *bdAddr, UBYTE *name) { BtStatus btStatus; BtlBmgDeviceRecord record; TRACE_FUNCTION("mfw_btips_bmgGetDeviceName"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr, &record); if(BT_STATUS_SUCCESS == btStatus) { OS_MemCopy(record.name, name, BT_MAX_REM_DEV_NAME); BTL_BMG_SetDeviceRecord(mfwBtipsBmgContext, &record); } else { bdaddr_ntoa(bdAddr, name); } return TRUE; } BOOL mfw_btips_bmgGetDeviceState (const BD_ADDR *bdAddr, BtRemDevState *state) { TRACE_FUNCTION("mfw_btips_bmgGetDeviceState"); BTL_BMG_GetRemDevState (mfwBtipsBmgContext, bdAddr, state); return TRUE; } /*--------------------------------------------------------------------------- * mfw_btips_bmgSendPin *--------------------------------------------------------------------------- * * Synopsis: Send PIN code. * * Return: TRUE if send PIN code is successful, FALSE otherwise. * */ BOOL mfw_btips_bmgSendPin (const BD_ADDR *bdAddr, const U8 *pin, const U8 len) { BtStatus btStatus; btStatus = BTL_BMG_PinReply(mfwBtipsBmgContext, bdAddr, pin, len, BPT_SAVE_TRUSTED); return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmgSendHciCommand *--------------------------------------------------------------------------- * * Synopsis: Send an HCI Command. * * Return: TRUE if command was sent successfully, FALSE otherwise. * */ BOOL mfw_btips_bmgSendHciCommand (const U16 hciCommand, const U8 parmsLen, const U8 *parms, const U8 event) { BtStatus btStatus; TRACE_FUNCTION_P1("mfw_btips_bmgSendHciCommand %x", hciCommand); btStatus = BTL_BMG_SendHciCommand(mfwBtipsBmgContext, hciCommand, parmsLen, parms, event); return mfw_btips_checkStatus(btStatus); } BOOL mfw_btips_bmgBond(const BD_ADDR *bdAddr, const U8 *pin, const U8 len) { BtStatus btStatus; btStatus = BTL_BMG_Bond(mfwBtipsBmgContext, bdAddr, pin, len, BPT_SAVE_TRUSTED); return mfw_btips_checkStatus(btStatus); } BOOL mfw_btips_bmgCancelBond(const BD_ADDR *bdAddr) { BtStatus btStatus; TRACE_FUNCTION("mfw_btips_bmgCancelBond"); btStatus = BTL_BMG_CancelBond(mfwBtipsBmgContext, bdAddr); return mfw_btips_checkStatus(btStatus); } BOOL mfw_btips_bmgGetCodMajorValue(U8* CODMajorStr, U32 *CODMajor) { BOOL result; #if 0 LINE_PARSER_ToLower(CODMajorStr); *CODMajor = COD_MAJOR_MISCELLANEOUS; result = TRUE; if (strcmp((const char*)CODMajorStr, "comp") == 0) { *CODMajor = COD_MAJOR_COMPUTER; } else if (strcmp((const char*)CODMajorStr, "phone") == 0) { *CODMajor = COD_MAJOR_PHONE; } else if (strcmp((const char*)CODMajorStr, "lan") == 0) { *CODMajor = COD_MAJOR_LAN_ACCESS_POINT; } else if (strcmp((const char*)CODMajorStr, "audio") == 0) { *CODMajor = COD_MAJOR_AUDIO; } else if (strcmp((const char*)CODMajorStr, "periph") == 0) { *CODMajor = COD_MAJOR_PERIPHERAL; } else if (strcmp((const char*)CODMajorStr, "imaging") == 0) { *CODMajor = COD_MAJOR_IMAGING; } else if (strcmp((const char*)CODMajorStr, "none") == 0) { *CODMajor = COD_MAJOR_MISCELLANEOUS; } else { result = FALSE; } #endif return result; } BOOL mfw_btips_bmgGetLAPValue(U8* lapStr, U32 *lap) { BOOL result; #if 0 LINE_PARSER_ToLower(lapStr); result = TRUE; if (strcmp((const char*)lapStr, "giac") == 0) { *lap = BT_IAC_GIAC; } if (strcmp((const char*)lapStr, "liac") == 0) { *lap = BT_IAC_LIAC; } else { result = FALSE; } #endif return result; } /*--------------------------------------------------------------------------- * mfw_btips_bmgSearch *--------------------------------------------------------------------------- * * Synopsis: Starts search process. * * Return: TRUE if search process is successfull, FALSE otherwise. * */ BOOL mfw_btips_bmgCancelSearch (void) { BtStatus btStatus = BT_STATUS_FAILED; TRACE_FUNCTION ("mfw_btips_bmgCancelSearch()"); btStatus = BTL_BMG_CancelSearch(mfwBtipsBmgContext); TRACE_FUNCTION_P1("MFW_BTIPS_BMG :BTL_BMG_CancelSearch returned btStatus: %s", pBT_Status(btStatus)); return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmgSearch *--------------------------------------------------------------------------- * * Synopsis: Starts search process. * * Return: TRUE if search process is successfull, FALSE otherwise. * */ BOOL mfw_btips_bmgSearch (BOOL searchType) { BtStatus status = BT_STATUS_FAILED; BtlBmgCodFilter CODFilter; BtlBmgCodFilter *CODFilterPtr = 0; // U8 lapStr[11]; BOOL performNameRequest = TRUE; U8 maxResp = 0; // U8 CODMajorStr[21]; // U32 CODMajor; TRACE_FUNCTION_P1 ("mfw_btips_bmgSearch TYPE = %d", searchType); switch(searchType) { case BTIPS_GENERIC_DEVICE_SEARCH: status = BTL_BMG_SearchByCod(mfwBtipsBmgContext, BTL_BMG_SEARCH_REGULAR, BT_IAC_GIAC, BT_INQ_TIME_GAP100, MAX_RESPONSES, 0, performNameRequest, SDP_SERVICE_NONE); break; case BTIPS_A2DP_DEVICE_SEARCH: CODFilter.codFilterMask = BTL_BMG_SEARCH_COD_FILTER_SERVICE_CLS|BTL_BMG_SEARCH_COD_FILTER_SERVICE_CLS; CODFilter.serviceClass = COD_RENDERING|COD_AUDIO; CODFilter.majorDeviceClass = COD_MAJOR_AUDIO; status = BTL_BMG_SearchByCod(mfwBtipsBmgContext, BTL_BMG_SEARCH_REGULAR, BT_IAC_GIAC, BT_INQ_TIME_GAP100, MAX_RESPONSES, &CODFilter, performNameRequest, SDP_SERVICE_NONE); break; case BTIPS_OPP_DEVICE_SEARCH: CODFilter.codFilterMask = BTL_BMG_SEARCH_COD_FILTER_SERVICE_CLS; CODFilter.serviceClass = COD_OBJECT_TRANSFER; status = BTL_BMG_SearchByCod(mfwBtipsBmgContext, BTL_BMG_SEARCH_REGULAR, BT_IAC_GIAC, BT_INQ_TIME_GAP100, MAX_RESPONSES, &CODFilter, performNameRequest, SDP_SERVICE_NONE); break; case BTIPS_HSHF_DEVICE_SEARCH: CODFilter.codFilterMask = BTL_BMG_SEARCH_COD_FILTER_MAJOR_DEV_CLS; CODFilter.majorDeviceClass = COD_MAJOR_AUDIO; status = BTL_BMG_SearchByCod(mfwBtipsBmgContext, BTL_BMG_SEARCH_REGULAR, BT_IAC_GIAC, BT_INQ_TIME_GAP100, MAX_RESPONSES, &CODFilter, performNameRequest, SDP_SERVICE_NONE); break; } mfw_BtipsReport(("MFW_BTIPS_BMG :BTL_BMG_SearchByCod returned status: %s", pBT_Status(status))); return mfw_btips_checkStatus(status); } /*--------------------------------------------------------------------------- * mfw_btips_bmgGetLocalDeviceName *--------------------------------------------------------------------------- * * Synopsis: Extract the currently set local name * * Return: * */ BOOL mfw_btips_bmgGetLocalDeviceName(U8 *name) { BtStatus btStatus; U8 len = 0; btStatus = BTL_BMG_GetLocalDeviceName(mfwBtipsBmgContext, name, &len); return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmgSetLocalDeviceName *--------------------------------------------------------------------------- * * Synopsis: Set local name (Send a null terminated string) of our device. * * Return: TRUE if setting local name is successfull, FALSE otherwise. * */ BOOL mfw_btips_bmgSetLocalDeviceName (U8 *name) { U8 len = 0; BtStatus btStatus = BT_STATUS_FAILED; len = (U8)(OS_StrLen((const char *)(name))); name[len]=0; btStatus = BTL_BMG_SetLocalDeviceName(mfwBtipsBmgContext, (U8 *)(name), len+1); return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmgSetPhoneVisibility *--------------------------------------------------------------------------- * * Synopsis: Set Accessibility of the BT device. * * Return: . * */ BOOL mfw_btips_bmgSetPhoneVisibility(BOOL status) { BtStatus btStatus; BtAccessibleMode modeNC; //BtAccessModeInfo infoNC; BtAccessibleMode modeC; //BtAccessModeInfo infoC; TRACE_FUNCTION("mfw_btips_bmgSetPhoneVisibility"); btStatus = BTL_BMG_GetAccessibleMode(mfwBtipsBmgContext, &modeNC, 0, &modeC, 0); TRACE_EVENT_P2("BTL_BMG_GetAccessibleMode %d, %d", modeNC, modeC); if(TRUE == status) { modeNC = BAM_GENERAL_ACCESSIBLE; modeC = BAM_GENERAL_ACCESSIBLE; } else { modeNC = BAM_CONNECTABLE_ONLY; modeC = BAM_CONNECTABLE_ONLY; } btStatus = BTL_BMG_SetAccessibleMode(mfwBtipsBmgContext, &modeNC, 0, &modeC, 0); TRACE_EVENT_P2("BTL_BMG_SetAccessibleMode %d, %d", modeNC, modeC); return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmgSetPhoneVisibility *--------------------------------------------------------------------------- * * Synopsis: Set Accessibility of the BT device. * * Return: . * */ BOOL mfw_btips_bmgGetPhoneVisibility(void) { BtStatus btStatus; BtAccessibleMode modeNC; BtAccessibleMode modeC; TRACE_FUNCTION("mfw_btips_bmgSetPhoneVisibility"); btStatus = BTL_BMG_GetAccessibleMode(mfwBtipsBmgContext, &modeNC, 0, &modeC, 0); if(modeNC == BAM_GENERAL_ACCESSIBLE) return TRUE; return FALSE; } /*--------------------------------------------------------------------------- * mfw_btips_bmgDeviceDelete *--------------------------------------------------------------------------- * * Synopsis: Delete a record with the given "bdAddr" from the device database. * * Return: . * */ BOOL mfw_btips_bmgDeviceDelete(const BD_ADDR *bdAddr) { BtStatus btStatus; btStatus = BTL_BMG_DeleteDeviceRecord(mfwBtipsBmgContext, bdAddr); mfw_BtipsReport(("BTL_BMG_GetNumberOfDeviceRecords() returned %s.\n", pBT_Status(btStatus))); return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmg_getPairedDevices *--------------------------------------------------------------------------- * * Synopsis: Enumerate the device database. * * Return: . * */ BOOL mfw_btips_bmg_getPairedDevices(Bmg_DeviceList *pairedDeviceList, U32 *count) { BtStatus btStatus; U32 index, numOfDevicesDB; BtlBmgDeviceRecord deviceRecord; *count = 0; TRACE_FUNCTION ("mfw_btips_bmg_getPairedDevices()"); /* Checks if the DB is empty or not*/ btStatus= BTL_BMG_GetNumberOfDeviceRecords(mfwBtipsBmgContext, &numOfDevicesDB); mfw_BtipsReport(("BTL_BMG_GetNumberOfDeviceRecords() returned %s.\n", pBT_Status(btStatus))); if(numOfDevicesDB!=0) { /*Current limitation is to have a display of only BT_MAX_DEVICE_LIST devices*/ for (index=0;index <numOfDevicesDB && index <= BT_MAX_DEVICE_LIST; index++) { btStatus=BTL_BMG_EnumDeviceRecords(mfwBtipsBmgContext, index, &deviceRecord); mfw_BtipsReport(("BTL_BMG_EnumDeviceRecords() returned %s for %d: %s", pBT_Status(btStatus), index, deviceRecord.name)); if (btStatus == BT_STATUS_SUCCESS) { OS_MemCopy((U8*)&pairedDeviceList[index].bdAddr, (U8*)&deviceRecord.bdAddr, sizeof(BD_ADDR)); strcpy(pairedDeviceList[index].name, deviceRecord.name); pairedDeviceList[index].myIndex = index; } } *count = index; return TRUE; } return mfw_btips_checkStatus(btStatus); } /*--------------------------------------------------------------------------- * mfw_btips_bmg_getConnectedDevices *--------------------------------------------------------------------------- * * Synopsis: Enumerate the device database. * * Return: . * */ BOOL mfw_btips_bmg_getConnectedDevices(Bmg_ConnectedDeviceList *ConnectedDeviceList, U32 *count) { BtStatus btStatus; U32 index;//, numOfDevicesDB; // BtlBmgDeviceRecord deviceRecord; U32 profile_count=0; BD_ADDR bdAddr; char name[BT_MAX_REM_DEV_NAME]; U32 ServiceID; *count = 0; TRACE_FUNCTION ("mfw_btips_bmg_getConnectedDevices()"); for (index=0;index <BTIPS_MAX_PROFILE_COUNT; index++) { btStatus = mfw_btips_bmg_getConnectedDevicesForProfile(index,&bdAddr,name,&ServiceID); if (btStatus) { memset(&ConnectedDeviceList[*count].name,0,BT_MAX_REM_DEV_NAME*sizeof(UBYTE)); memset(&ConnectedDeviceList[*count].bdAddr,0,sizeof(BD_ADDR)); OS_MemCopy((U8*)&ConnectedDeviceList[*count].bdAddr,(U8*)&bdAddr, sizeof(BD_ADDR)); strcpy(ConnectedDeviceList[*count].name, name); ConnectedDeviceList[*count].myIndex = *count; ConnectedDeviceList[*count].ServiceId= ServiceID; ServiceID = 0; (*count)++; } } return mfw_btips_checkStatus(btStatus); } U32 mfw_btips_bmg_getConnectedDevicesCount(void) { BtStatus btStatus; U32 index, count=0; BD_ADDR bdAddr; char name[BT_MAX_REM_DEV_NAME]; U32 ServiceID; TRACE_FUNCTION ("mfw_btips_bmg_getConnectedDevicesCount()"); for (index=0;index <BTIPS_MAX_PROFILE_COUNT; index++) { btStatus = mfw_btips_bmg_getConnectedDevicesForProfile(index,&bdAddr,name,&ServiceID); if (btStatus) { count++; } } return count; } BOOL mfw_btips_bmg_getConnectedDevicesForProfile(U32 profile_num, BD_ADDR *bdAddr, U8 *name, U32 *ServiceID) { BOOL status; switch(profile_num) { case BTIPS_SDP_SERVICE_A2DP: status = mfw_btips_a2dpGetConnectedDevice(bdAddr, name); if(TRUE ==status) *ServiceID = BTIPS_SDP_SERVICE_A2DP; TRACE_EVENT_P1("mfw_btips_bmg_getConnectedDevicesForProfile A2DP name =%s ",name); break; case BTIPS_SDP_SERVICE_VG: status=mfw_btips_vgGetConnectedDevice(bdAddr, name); if(TRUE ==status) *ServiceID = BTIPS_SDP_SERVICE_VG; TRACE_EVENT_P1("mfw_btips_bmg_getConnectedDevicesForProfile OPPC name =%s ",name); break; case BTIPS_SDP_SERVICE_OPPC: status=mfw_btips_oppcGetConnectedDevice(bdAddr, name); if(TRUE ==status) *ServiceID = BTIPS_SDP_SERVICE_OPPC; TRACE_EVENT_P1("mfw_btips_bmg_getConnectedDevicesForProfile OPPC name =%s ",name); break; case BTIPS_SDP_SERVICE_OPPS: status=mfw_btips_oppsGetConnectedDevice(bdAddr, name); if(TRUE ==status) *ServiceID = BTIPS_SDP_SERVICE_OPPS; TRACE_EVENT_P1("mfw_btips_bmg_getConnectedDevicesForProfile OPPS name =%s ",name); break; case BTIPS_SDP_SERVICE_FTPS: status=mfw_btips_ftpsGetConnectedDevice(bdAddr, name); if(TRUE ==status) *ServiceID = BTIPS_SDP_SERVICE_FTPS; TRACE_EVENT_P1("mfw_btips_bmg_getConnectedDevicesForProfile FTPS name =%s ",name); break; default: break; } return status; } #if 0 /*--------------------------------------------------------------------------- * APP_BMG_SetSecurityMode *--------------------------------------------------------------------------- * * Synopsis: Set the security level of our device. * * Return: TRUE if setting the security level is successfull, FALSE otherwise. * */ BOOL APP_BMG_SetSecurityMode (void) { BtStatus status = BT_STATUS_FAILED; U8 SecLevel; LINE_PARSER_GetNextU8(&SecLevel, FALSE); status = BTL_BMG_SetSecurityMode(mfwBtipsBmgContext, (SecLevel+1)); mfw_BtipsReport(("MFW_BTIPS_BMG :BTL_BMG_SetSecurityMode returned status: %s", pBT_Status(status))); if (status == BT_STATUS_SUCCESS) { return TRUE; } return FALSE; } /*--------------------------------------------------------------------------- * APP_BMG_SetSecurityMode *--------------------------------------------------------------------------- * * Synopsis: Get the security level of our device. * * Return: TRUE if getting the security level is successfull, FALSE otherwise. * */ BOOL APP_BMG_GetSecurityMode (void) { BtStatus status = BT_STATUS_FAILED; BtSecurityMode CurrentSecLevel; status = BTL_BMG_GetSecurityMode(mfwBtipsBmgContext, &CurrentSecLevel); mfw_BtipsReport(("MFW_BTIPS_BMG :APP_BMG_GetSecurityMode returned status: %s", pBT_Status(status))); if (status == BT_STATUS_SUCCESS) { mfw_BtipsReport(("MFW_BTIPS_BMG : Current security mode is: %d", (CurrentSecLevel-1))); return TRUE; } return FALSE; } #endif /*--------------------------------------------------------------------------- * APP_BMG_AuthorizeDeviceReply *--------------------------------------------------------------------------- * * Synopsis: Reply for authorization request of another device. * * Return: TRUE if Autorization reply is successfull, FALSE otherwise. * */ BOOL mfw_btips_bmgAuthorizeDeviceReply (BOOL auth, BD_ADDR *BdAddr) { BtStatus btStatus = BT_STATUS_FAILED; U8 AuthorizationType;//, BD_array[BDADDR_NTOA_SIZE]; AuthorizationType = auth? BTL_BMG_AUTHORIZED_NOT_TRUSTED: BTL_BMG_NOT_AUTHORIZED; // btStatus = BTL_BMG_AuthorizeDeviceReply(mfwBtipsBmgContext, &BdAddr, (BtlBmgAuthorizationType) (AuthorizationType)); if (btStatus == BT_STATUS_SUCCESS) { return TRUE; } return FALSE; } /*--------------------------------------------------------------------------- * mfw_btips_bmgInit *--------------------------------------------------------------------------- * * Synopsis: BMG application initialization. * * Return: NONE. * */ void mfw_btips_bmgInit (void) { BtStatus btStatus = BT_STATUS_FAILED; btStatus = BTL_BMG_Create(0, btips_bmgCallback, &mfwBtipsBmgContext); Assert(btStatus == BT_STATUS_SUCCESS); btStatus = BTL_BMG_SetEventForwardingMode(mfwBtipsBmgContext, BTL_BMG_EVENT_FORWARDING_ALL_EVENTS); Assert(btStatus == BT_STATUS_SUCCESS); #if 0 btStatus = BTL_BMG_SetClassOfDevice(mfwBtipsBmgContext, (COD_MAJOR_PHONE | COD_MINOR_PHONE_CELLULAR)); Assert(btStatus == BT_STATUS_SUCCESS); #endif mfw_BtipsReport(("BMGA_Init() complete.\n")); } /*--------------------------------------------------------------------------- * mfw_btips_bmgDeinit *--------------------------------------------------------------------------- * * Synopsis: BMG application deinitialization. * * Return: NONE. * */ void mfw_btips_bmgDeinit(void) { BtStatus btStatus = BT_STATUS_FAILED; btStatus = BTL_BMG_Destroy(&mfwBtipsBmgContext); Assert(btStatus == BT_STATUS_SUCCESS); mfw_BtipsReport(("BMGA_Deinit() complete.\n")); } /*--------------------------------------------------------------------------- * btips_bmgCallback *--------------------------------------------------------------------------- * * Synopsis: Callback function to handle BMG profile events invoked in BTS context. * * Return: NONE. * */ void btips_bmgCallback (const BtlBmgEvent *bmgEvent) { const BtEvent *event = bmgEvent->event; BtStatus btStatus = BT_STATUS_FAILED; char bdAddr[BDADDR_NTOA_SIZE]; char *name; T_BTIPS_MMI_IND btips_mmi_ind; TRACE_FUNCTION_P1("btips_bmgCallback: %s", pME_Event(event->eType)); btips_mmi_ind.mfwBtipsEventType = MFW_BTIPS_BMG_EVENT; btips_mmi_ind.data.bmgBtEvent.eventType = event->eType; btips_mmi_ind.data.bmgBtEvent.errCode =event->errCode; switch (event->eType) { case BTEVENT_LINK_CONNECT_IND: btStatus = BTL_BMG_GetRemoteDeviceName(mfwBtipsBmgContext, &event->p.remDev->bdAddr); break; case BTEVENT_HCI_INITIALIZED: btStatus = BTL_BMG_SetLocalDeviceName(mfwBtipsBmgContext, (U8 *)PME_APP_NAME, (U8)(sizeof(PME_APP_NAME))); mfw_BtipsReport(("MFW_BTIPS_BMG :BTL_BMG_SetLocalDeviceName returned status: %s", pBT_Status(btStatus))); btStatus = BTL_BMG_SetDefaultLinkPolicy(mfwBtipsBmgContext, ((BLP_MASTER_SLAVE_SWITCH|BLP_HOLD_MODE|BLP_SNIFF_MODE|BLP_PARK_MODE|BLP_SCATTER_MODE)&(~BLP_MASK)), ((BLP_MASTER_SLAVE_SWITCH|BLP_HOLD_MODE|BLP_SNIFF_MODE|BLP_PARK_MODE|BLP_SCATTER_MODE)&(~BLP_MASK))); mfw_BtipsReport(("MFW_BTIPS_BMG :BTL_BMG_SetDefaultLinkPolicy returned status: %s", pBT_Status(btStatus))); btStatus = BTL_BMG_SetSecurityMode(mfwBtipsBmgContext, BSM_SEC_LEVEL_2); mfw_BtipsReport(("MFW_BTIPS_BMG :BTL_BMG_SetSecurityMode returned status: %s", pBT_Status(btStatus))); btipsNotifyMFW(btips_mmi_ind); break; case BTEVENT_HCI_DEINITIALIZED: btipsNotifyMFW(btips_mmi_ind); break; case BTEVENT_HCI_FAILED: btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_PAIRING_COMPLETE: TRACE_EVENT_P2("Pairing with %s complete. status %s.\n", bdaddr_ntoa( &event->p.remDev->bdAddr, bdAddr), pHC_Status(event->errCode)); OS_MemCopy((U8*)&btips_mmi_ind.data.bmgBtEvent.bdAddr, (U8*)&event->p.remDev->bdAddr, sizeof(BD_ADDR)); btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_BOND_RESULT: if (event->errCode != BEC_NO_ERROR) { TRACE_EVENT_P2("Bond attempt to %s failed. Reason %s.", bdaddr_ntoa(&event->p.bdAddr, bdAddr), pHC_Status(event->errCode)); } else { TRACE_EVENT_P1("Bond to %s ended successfully", bdaddr_ntoa(&event->p.bdAddr, bdAddr)); } OS_MemCopy((U8*)&btips_mmi_ind.data.bmgBtEvent.bdAddr, (U8*)&event->p.bdAddr, sizeof(BD_ADDR)); btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_BOND_CANCELLED: btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_PIN_REQ: if (event->errCode == BT_STATUS_SUCCESS) { T_BTIPS_MMI_IND btipsMmiInd = {0}; BtlBmgDeviceRecord record; btStatus=BTL_BMG_GetRemoteDeviceName(mfwBtipsBmgContext, &event->p.remDev->bdAddr); TRACE_EVENT_P1("BTEVENT_PIN_REQ btStatus %d",btStatus); /* Prompt the user for a PIN code */ mfw_BtipsReport(("Please Enter PIN Code for %s", bdaddr_ntoa(&event->p.remDev->bdAddr, bdAddr))); } else { /* Cancel the PIN code request */ mfw_BtipsReport ((("BMG: Pin code couldn't be displayed because of an error"))); } OS_MemCopy((U8*)&btips_mmi_ind.data.bmgBtEvent.bdAddr, (U8*)&event->p.remDev->bdAddr, sizeof(BD_ADDR)); btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_AUTHORIZATION_REQ: TRACE_EVENT_P1("Authorization request received from %s",bdaddr_ntoa(&event->p.remDev->bdAddr, bdAddr)); break; case BTEVENT_INQUIRY_RESULT: mfw_BtipsReport(("Inquiry result arrived, BD address: %s", bdaddr_ntoa(&event->p.inqResult.bdAddr, bdAddr))); break; case BTEVENT_SEARCH_COMPLETE: case BTEVENT_SEARCH_CANCELLED: TRACE_EVENT_P1("Search %s ", ((event->eType == BTEVENT_SEARCH_COMPLETE) ? ("completed") : ("cancelled"))); btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_INQUIRY_COMPLETE: case BTEVENT_INQUIRY_CANCELED: TRACE_EVENT_P1("Inquiry %s ", ((event->eType == BTEVENT_INQUIRY_COMPLETE) ? ("completed") : ("cancelled"))); //btipsNotifyMFW(&btips_mmi_ind); break; case BTEVENT_NAME_RESULT: if (event->errCode == BEC_NO_ERROR) { OS_MemCopy((U8*)&btips_mmi_ind.data.bmgBtEvent.bdAddr, (U8*)&event->p.meToken->p.name.bdAddr, sizeof(BD_ADDR)); if (event->p.meToken->p.name.io.out.len == 0) { name = "Unknown"; strcpy(btips_mmi_ind.data.bmgBtEvent.p.deviceName, bdaddr_ntoa(&event->p.meToken->p.name.bdAddr, bdAddr)); } else { name = (char *)(event->p.meToken->p.name.io.out.name); if (name) { } else { TRACE_EVENT("BTEVENT_NAME_RESULT Name = NULL"); } strcpy(btips_mmi_ind.data.bmgBtEvent.p.deviceName, name); } TRACE_EVENT_P2("Received name %s for device %s", name, bdaddr_ntoa(&event->p.meToken->p.name.bdAddr, bdAddr)); btipsNotifyMFW(&btips_mmi_ind); } else { /* Record that the name request failed. Next time we'll skip it. */ mfw_BtipsReport(("BMG: Name request for %s failed, status %s.\n", bdaddr_ntoa(&event->p.meToken->p.name.bdAddr, bdAddr), pHC_Status(event->errCode))); } break; case BTEVENT_DISCOVER_SERVICES_RESULT : btips_mmi_ind.data.bmgBtEvent.p.discoveredServicesMask = event->p.discoveredServices.discoveredServicesMask; bdaddr_ntoa(&event->p.discoveredServices.bdAddr, bdAddr); OS_MemCopy((U8*)&btips_mmi_ind.data.bmgBtEvent.bdAddr , (U8*)&event->p.discoveredServices.bdAddr, sizeof(BD_ADDR)); btips_mmi_ind.data.bmgBtEvent.p.discoveredServicesMask = event->p.discoveredServices.discoveredServicesMask; TRACE_EVENT_P2("Discover Services %x for %s",event->p.discoveredServices.discoveredServicesMask, bdAddr); btipsNotifyMFW(&btips_mmi_ind); break; default: break; } } /************************************************************************ BMG in ACI Context Module Start ************************************************************************/ void mfw_btips_bmgCallback( T_BTIPS_MMI_IND * para) { MfwBtBmgEvent bmgBtEvent = para->data.bmgBtEvent; TRACE_FUNCTION_P1("mfw_btips_bmgCallback - %s", pME_Event(bmgBtEvent.eventType)); switch(bmgBtEvent.eventType) { case BTEVENT_HCI_DEINITIALIZED: break; case BTEVENT_HCI_INITIALIZED: mfw_btips_bmgSetPhoneVisibility(TRUE); break; case BTEVENT_HCI_FAILED: mfw_btips_signal(E_BTIPS_POWERON_FAILURE, NULL); break; case BTEVENT_PAIRING_COMPLETE: mfw_btips_signal(E_BTIPS_BMG_PAIRING_COMPLETE, para); break; case BTEVENT_BOND_RESULT: mfw_btips_signal(E_BTIPS_BMG_BOND_COMPLETE, para); break; case BTEVENT_BOND_CANCELLED: mfw_btips_signal(E_BTIPS_BMG_BOND_CANCELLED, NULL); break; case BTEVENT_PIN_REQ: if (bmgBtEvent.errCode == BT_STATUS_SUCCESS) { mfw_btips_signal(E_BTIPS_INCOMING_PIN_REQ, para); } break; case BTEVENT_NAME_RESULT: TRACE_EVENT_P1("Received name for device %s", bmgBtEvent.p.deviceName); mfw_btips_signal(E_BTIPS_BMG_NAME_RESULT, para); break; case BTEVENT_SEARCH_COMPLETE: mfw_btips_signal(E_BTIPS_BMG_SEARCH_COMPLETE, NULL); break; case BTEVENT_SEARCH_CANCELLED: mfw_btips_signal(E_BTIPS_BMG_SEARCH_CANCELLED, NULL); break; case BTEVENT_INQUIRY_COMPLETE: break; case BTEVENT_INQUIRY_CANCELED: break; case BTEVENT_DISCOVER_SERVICES_RESULT: TRACE_FUNCTION("mfw_btips_bmgCallback BTEVENT_DISCOVER_SERVICES_RESULT"); mfw_btips_signal(E_BTIPS_BMG_DEVICE_SERVICES, para); break; default: break; } } BOOL mfw_btips_bmgDeviceSetConnectPermissionAllow(const BD_ADDR *bdAddr,BOOL permission ) { BtlBmgDeviceRecord record; BtStatus btStatus = BT_STATUS_FAILED; TRACE_FUNCTION("mfw_btips_bmgDeviceSetConnectPermissionAllow()"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr, &record); TRACE_EVENT_P1("BTL_BMG_FindDeviceRecord in mfw_btips_bmgDeviceSetConnectPermissionAllow returned - %d", btStatus); if(BT_STATUS_SUCCESS == btStatus) { record.trusted = TRUE; record.trustedPerService= SDP_SERVICE_OPP|SDP_SERVICE_DUN|SDP_SERVICE_FTP|SDP_SERVICE_A2DP|SDP_SERVICE_HFP; //Not sure if this is the way to set the bits in the mask field btStatus = BTL_BMG_SetDeviceRecord(mfwBtipsBmgContext, &record); TRACE_EVENT_P1("BTL_BMG_SetDeviceRecord in mfw_btips_bmgDeviceSetConnectPermissionAllow returned - %d", btStatus); } return mfw_btips_checkStatus(btStatus); } BOOL mfw_btips_bmgDeviceSetConnectPermissionAsk(const BD_ADDR *bdAddr,BOOL permission) { BtlBmgDeviceRecord record; BtStatus btStatus = BT_STATUS_FAILED; TRACE_FUNCTION("mfw_btips_bmgDeviceSetConnectPermissionAsk()"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr,&record); TRACE_EVENT_P1("BTL_BMG_FindDeviceRecord in mfw_btips_bmgDeviceSetConnectPermissionAsk returned - %d", btStatus); if(BT_STATUS_SUCCESS == btStatus) { record.trusted = FALSE; record.trustedPerService= 0; //Not sure if this is the way to set the bits in the mask field btStatus = BTL_BMG_SetDeviceRecord(mfwBtipsBmgContext, &record); TRACE_EVENT_P1("BTL_BMG_SetDeviceRecord in mfw_btips_bmgDeviceSetConnectPermissionAsk returned - %d", btStatus); } return mfw_btips_checkStatus(btStatus); } BOOL mfw_btips_bmgSetRemoteDeviceName( const BD_ADDR *bdAddr, U8 *name) { BtStatus btStatus = BT_STATUS_FAILED; BtlBmgDeviceRecord record; TRACE_FUNCTION("mfw_btips_bmgSetRemoteDeviceName()"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr,&record); if(BT_STATUS_SUCCESS == btStatus) { strcpy(record.name, name); btStatus = BTL_BMG_SetDeviceRecord(mfwBtipsBmgContext, &record); } return mfw_btips_checkStatus(btStatus); } //vamsee /* Get the Services Supported by the Remote Device*/ U32 mfw_btips_bmgDeviceGetServices(const BD_ADDR *bdAddr) { BtlBmgDeviceRecord record; BtStatus btStatus = BT_STATUS_FAILED; TRACE_FUNCTION("mfw_btips_bmgDeviceGetServices()"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr, &record); TRACE_EVENT_P1("Record Services %x",record.services); return record.services; } BOOL mfw_btips_bmg_DiscoverServices(const BD_ADDR *bdAddr, SdpServicesMask sdpServicesMask) { BtStatus btStatus; TRACE_EVENT_P1("mfw_btips_bmg_DiscoverServices Discover %x",sdpServicesMask); btStatus = BTL_BMG_DiscoverServices(mfwBtipsBmgContext, bdAddr, sdpServicesMask); return mfw_btips_checkStatus(btStatus); } BOOL mfw_btips_bmgSetDeviceRecord( const BD_ADDR *bdAddr, U32 sdpSericesMask) { BtStatus btStatus = BT_STATUS_FAILED; BtlBmgDeviceRecord record; TRACE_FUNCTION("mfw_btips_bmgSetDeviceRecord()"); btStatus = BTL_BMG_FindDeviceRecord(mfwBtipsBmgContext, bdAddr,&record); if(BT_STATUS_SUCCESS == btStatus) { TRACE_EVENT_P1("mfw_btips_bmgSetDeviceRecord() %x",sdpSericesMask); record.services = sdpSericesMask; TRACE_EVENT_P1("Record Services %x",record.services); btStatus = BTL_BMG_SetDeviceRecord(mfwBtipsBmgContext, &record); } return mfw_btips_checkStatus(btStatus); } /************************************************************************ BMG in ACI Context Module End ************************************************************************/ #endif