view cdg-hybrid/cdginc/p_fad.val @ 268:f5c10ec9c5fd

init.c: module passes compilation, Init_Drivers() and Init_Serial_Flows() functions are good, Init_Target() and Init_Unmask_IT() need further work
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 06 Aug 2017 09:21:57 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_fad.val                                                      |
| SOURCE  : "sap\fad.pdf"                                                  |
| LastModified : "2002-04-22"                                              |
| IdAndVersion : "8411.103.00.305"                                         |
| SrcFileTime  : "Thu Nov 29 09:41:22 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_FAD_VAL
#define P_FAD_VAL


#define CDG_ENTER__P_FAD_VAL

#define CDG_ENTER__FILENAME _P_FAD_VAL
#define CDG_ENTER__P_FAD_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_FAD_VAL__LAST_MODIFIED _2002_04_22
#define CDG_ENTER__P_FAD_VAL__ID_AND_VERSION _8411_103_00_305

#define CDG_ENTER__P_FAD_VAL__SRC_FILE_TIME _Thu_Nov_29_09_41_22_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_FAD_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_trans_rate
 */
#define R_BCS                          (0x12c)    /* rate 300 bit/s                 */
#define R_2400                         (0x960)    /* rate 2400 bit/s                */
#define R_4800                         (0x12c0)   /* rate 4800 bit/s                */
#define R_7200                         (0x1c20)   /* rate 7200 bit/s                */
#define R_9600                         (0x2580)   /* rate 9600 bit/s                */
#define R_12000                        (0x2ee0)   /* rate 12000 bit/s               */
#define R_14400                        (0x3840)   /* rate 14400 bit/s               */

/*
 * Value constants for VAL_mode
 */
#define MUX_OFF                        (0x0)      /* ignore                         */
#define MUX_BCS                        (0x1)      /* BCS data                       */
#define MUX_MSG                        (0x2)      /* MSG  data                      */

/*
 * Value constants for VAL_cause
 */
#define ERR_REM_FAD                    (0xcc00)   /* reserved                       */
#define ERR_REM_PREAMBLE               (0xcc11)   /* DATA received instead of PREAMBLE - Preamble too short */
#define ERR_REM_DATA_BCS               (0xcc12)   /* DATA received from remote modem during BCS phase */
#define ERR_REM_TRAIN_START            (0xcc13)   /* DATA received from remote modem at start of training */
#define ERR_REM_NO_TRAINING            (0xcc14)   /* DATA received from remote modem prior to training */
#define ERR_REM_TRAINING               (0xcc15)   /* DATA received from remote modem during training */
#define ERR_REM_MSG                    (0xcc16)   /* DATA received from remote modem while sending MSG data */
#define ERR_REM_PREAMBLE_SHORT         (0xcc17)   /* PREAMBLE received from remote station too short */
#define ERR_REM_PREAMBLE_LONG          (0xcc18)   /* PREAMBLE received from remote station too long */
#define ERR_REM_IDENT                  (0xcc19)   /* Incorrect identification from remote modem */
#define ERR_LOCAL_FAD                  (0xcc20)   /* reserved                       */
#define ERR_LOCAL_BCS_RATE             (0xcc21)   /* BCS rate requested by local modem (MSG phase) */
#define ERR_LOCAL_MSG_RATE             (0xcc22)   /* MSG rate requested by local modem (BCS phase) */
#define ERR_LOCAL_DATA_NULL            (0xcc23)   /* DATA request received from T30 in NULL state */
#define ERR_LOCAL_DATA_BCS             (0xcc24)   /* DATA request received from T30 while receiving BCS data */
#define ERR_LOCAL_DATA_TCF_SND         (0xcc25)   /* DATA request received from T30 while sending TCF  data */
#define ERR_LOCAL_DATA_TCF_RCV         (0xcc26)   /* DATA request received from T30 while receiving TCF  data */
#define ERR_LOCAL_DATA_MSG             (0xcc27)   /* DATA request received from T30 while receiving MSG data */
#define ERR_LOCAL_DATA_UNDEF           (0xcc28)   /* DATA request received from T30 - state unknown */
#define ERR_LOCAL_DATA_MSG_UFL         (0xcc29)   /* DATA request not received from T30 - MSG-REC underflow */
#define ERR_LOCAL_IDENT                (0xcc30)   /* Incorrect identification from local modem */
#define ERR_OWN_FAD                    (0xcc40)   /* reserved                       */
#define ERR_FAD_SUB_TRAIN              (0xcc41)   /* FAD in unknown substate during training */
#define ERR_FAD_SUB_TCF                (0xcc42)   /* FAD in unknown substate (TCF)  */
#define ERR_FAD_SUB_MSG                (0xcc43)   /* FAD in unknown substate (MSG)  */
#define ERR_GENERAL_FAD                (0xcc50)   /* reserved                       */
#define ERR_INVALID_DATA_RCV           (0xcc51)   /* invalid data received          */
#define ERR_EMPTY_BUFFER               (0xcc52)   /* send/receive buffer is empty   */
#define ERR_OVERFLOW_BCS_RCV           (0xcc52)   /* buffer  overflow while receiving BCS data */
#define ERR_NOT_SET                    (0xccff)   /* error not set                  */

/*
 * user defined constants
 */
#define DUMMY_FAD                      (0x0)      

#include "CDG_LEAVE.h"


#endif