+
−/* 
+
−+----------------------------------------------------------------------------- 
+
−|  Project :  GSM-PS (6147)
+
−|  Modul   :  CMH_MMS
+
−+----------------------------------------------------------------------------- 
+
−|  Copyright 2002 Texas Instruments Berlin, AG 
+
−|                 All rights reserved. 
+
−| 
+
−|                 This file is confidential and a trade secret of Texas 
+
−|                 Instruments Berlin, AG 
+
−|                 The receipt of or possession of this file does not convey 
+
−|                 any rights to reproduce or disclose its contents or to 
+
−|                 manufacture, use, or sell anything it may describe, in 
+
−|                 whole, or in part, without the specific written consent of 
+
−|                 Texas Instruments Berlin, AG. 
+
−+----------------------------------------------------------------------------- 
+
−|  Purpose :  This module provides the set functions related to the
+
−|             protocol stack adapter for mobility management.
+
−+----------------------------------------------------------------------------- 
+
−*/ 
+
−
+
−#ifndef CMH_MMS_C
+
−#define CMH_MMS_C
+
−#endif
+
−
+
−#include "aci_all.h"
+
−
+
−/*==== INCLUDES ===================================================*/
+
−#include "aci_cmh.h"
+
−
+
−#include "rtc.h"
+
−
+
−#ifdef DTI
+
−#include "dti.h"      /* functionality of the dti library */
+
−#include "dti_conn_mng.h"
+
−#endif
+
−
+
−#include "aci_mem.h"
+
−
+
−#ifdef FAX_AND_DATA
+
−/* #include "aci_fd.h" */
+
−#endif    /* of #ifdef FAX_AND_DATA */
+
−
+
−#include "psa.h"
+
−#include "psa_sim.h"
+
−#include "psa_mm.h"
+
−#include "cmh.h"
+
−#include "cmh_sim.h"
+
−#include "cmh_mm.h"
+
−
+
−#include "psa_cc.h"
+
−#include "cmh_cc.h"
+
−
+
−#ifdef GPRS
+
−  #include "gaci.h"
+
−  #include "gaci_cmh.h"
+
−  #include "psa_gmm.h"
+
−  #include "cmh_gmm.h"
+
−#endif
+
−
+
−#ifndef _SIMULATION_
+
−/***************************/
+
−/* TEMPORARY until NVM     */
+
−/* just to get FFs !!!! */
+
−#ifndef GPRS
+
−#define DONT_LET_FFSH_DEF_GPRS
+
−#endif
+
−
+
−#include "ffs/ffs.h"
+
−
+
−#include "rx.h"
+
−
+
−#include "rtc.h"
+
−
+
−#ifdef FF_TIMEZONE
+
−#include "rv/rv_general.h"
+
−#include "rtc/rtc_tz.h"
+
−#endif
+
−
+
−/* check whether latter has defined GPRS !!! */
+
−#ifdef DONT_LET_FFSH_DEF_GPRS
+
−#undef GPRS
+
−#endif
+
−
+
−#undef DONT_LET_FFSH_DEF_GPRS
+
−/***************************/
+
−#endif /* _SIMULATION_ */
+
−
+
−
+
−/*==== CONSTANTS ==================================================*/
+
−
+
−/*==== EXPORT =====================================================*/
+
−
+
−/*==== VARIABLES ==================================================*/
+
−
+
−/*==== FUNCTIONS ==================================================*/
+
−EXTERN void wake_up_rr (void);
+
−
+
−#ifndef _SIMULATION_
+
−LOCAL void rx_Cb (drv_SignalID_Type *signal_params);
+
−LOCAL UCHAR rx_sequence_Cb (void* arg);
+
−#endif /* _SIMULATION_ */
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentBAND          |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %BAND AT command
+
−            which is responsible for configuring the way the mobile
+
−            deals with multiband.
+
−
+
−            <bandMode>: band switch mode.
+
−            <bandType>: band selection by user: coded in bitfield as following.            
+
−            Bit set to 1 if band is set, 0 otherwise...
+
−       
+
−     BITS:  |    5   |   4   |    3    |    2    |    1   |      
+
−            | GSM850 | E_GSM | GSM1900 | GSM1800 | GSM900 |
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentBAND(T_ACI_CMD_SRC   srcId,
+
−                                    T_ACI_BAND_MODE bandMode,
+
−                                    UBYTE           bandType)
+
−{
+
−  UBYTE ManufacturerBands;
+
−  UBYTE ubyte_dummy;
+
−
+
−  TRACE_FUNCTION("sAT_PercentBAND()");
+
−
+
−  /* check command source */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  /* Check Parameter bandMode */
+
−  switch( bandMode )
+
−  {
+
−  case( BAND_MODE_Auto ):
+
−    bandType = 0x00;    /* scan all */
+
−    break;
+
−
+
−  case( BAND_MODE_Manual ):
+
−    /* Check Parameter bandType */
+
−    cmhMM_getBandSettings(&ubyte_dummy, &ManufacturerBands);
+
−
+
−    if( !cmhMM_isBandAllowed(bandType, ManufacturerBands) )
+
−    {
+
−      TRACE_EVENT_P1("Band combination %d is not supported by this hardware", bandType);
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−    }
+
−    break;
+
−  
+
−  default:
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  if( !cmhMM_writeSetBand(bandType) )
+
−    return(AT_FAIL);
+
−
+
−  /* switch off radio */
+
−  if( CFUNfun EQ CFUN_FUN_Full )
+
−  {
+
−    /* if mobile is on, proceed a soft switch off
+
−     and then switch back on */
+
−    mmEntStat.curCmd = AT_CMD_BAND;
+
−
+
−    return( sAT_PlusCFUN( srcId,
+
−                          CFUN_FUN_Disable_TX_RX_RF,
+
−                          CFUN_RST_NotPresent) );
+
−  }
+
−  else
+
−  {
+
−    /* new configuration has been written to Flash and that's it ! */
+
−    return( AT_CMPL);
+
−  }
+
−}
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PlusCOPS             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the +COPS AT command
+
−            which is responsible for selection and deselection of an
+
−            network operator.
+
−
+
−            <mode>:   registration mode.
+
−            <format>: format of operator selection
+
−            <oper>:   operator string
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_COPS_MOD mode,
+
−                                   T_ACI_COPS_FRMT format,
+
−                                   CHAR * oper )
+
−{
+
−
+
−  T_MM_CMD_PRM * pMMCmdPrm;  /* points to MM command parameters */
+
−
+
−
+
−  T_ACI_NRG_RGMD regMode; /*NRG Registration mode */
+
−  T_ACI_NRG_FRMT regFormat; 
+
−  T_ACI_NRG_SVMD  svrMode;
+
−
+
−
+
−  TRACE_FUNCTION ("sAT_PlusCOPS()");
+
−
+
−
+
−  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
−  mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode;
+
−  
+
−/*
+
−  *  check MM entity status
+
−  */
+
−  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+
−
+
−    return( AT_BUSY );
+
−
+
−
+
−/*
+
−  *convert  format to NRG type and set the COPS format value.
+
−  */
+
−
+
−
+
−if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt;
+
−
+
−  
+
−  switch( format )
+
−  {
+
−    case(    COPS_FRMT_NotPresent): 
+
−    regFormat = NRG_FRMT_NotPresent; 
+
−    break;
+
−    case(   COPS_FRMT_Numeric ): 
+
−    regFormat =NRG_FRMT_Numeric ; 
+
−    break;
+
−    case( COPS_FRMT_Short):
+
−    regFormat = NRG_FRMT_Short; 
+
−    break;
+
−    case( COPS_FRMT_Long):
+
−    regFormat = NRG_FRMT_Long; 
+
−    break;
+
−    default:
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−  }
+
−
+
−pMMCmdPrm -> COPSfrmt = format;
+
−
+
−
+
−
+
−/*
+
−  * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required.
+
−  * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(),  is set. 
+
−  */
+
−
+
−
+
−if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode;
+
−
+
−switch( mode )
+
−  {
+
−    case( COPS_MOD_NotPresent   ): 
+
−    regMode = NRG_RGMD_NotPresent; 
+
−    svrMode = NRG_SVMD_NotPresent;
+
−    break;
+
−    case(  COPS_MOD_Auto  ): 
+
−    regMode =NRG_RGMD_Auto ; 
+
−    svrMode = NRG_SVMD_Full;    /* Only Full Service makes sense for Automatic Mode */
+
−    break;
+
−    case(  COPS_MOD_Man):
+
−    regMode = NRG_RGMD_Manual; 
+
−    svrMode = NRG_SVMD_Full;   /* Only Full Service makes sense for Manual Mode */ 
+
−    break;
+
−    case(  COPS_MOD_Dereg):
+
−    regMode = NRG_RGMD_Dereg; 
+
−    svrMode = NRG_SVMD_Limited;    
+
−    break;
+
−    case(   COPS_MOD_Both ): 
+
−    regMode = NRG_RGMD_Both; 
+
−    svrMode = NRG_SVMD_Full;  /* Only Full Service makes sense for the Both Mode */
+
−    break;
+
−    case(COPS_MOD_SetOnly):  /*This mode can be fully handled in this function */
+
−       /* DO NOT SET mmShrdPrm.COPSmode !!! */
+
−      pMMCmdPrm -> COPSfrmt = format;
+
−      return AT_CMPL;
+
−    default:
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−  }
+
−
+
−mmShrdPrm.COPSmode = mode;
+
−
+
−
+
−
+
−/*Set the value of the current command executed */
+
−mmEntStat.curCmd  = AT_CMD_COPS;  
+
−
+
−return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper);
+
−  
+
−}
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentCOPS             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %COPS AT command
+
−            which is responsible for selection and deselection of an
+
−            network operator. %COPS will add, in principle, 
+
−            the following functionality to the standard AT command +COPS: 
+
−           
+
−            -Possibility to query the "service status" in which the phone is currently registered; 
+
−              the possible values will be "full service", "limited service" or  "no service".
+
−            -Possibility to select the "last registered" operator using  %COPS=1. 
+
−
+
−
+
−            <mode>:   registration mode.
+
−            <format>: format of operator selection
+
−            <oper>:   operator string
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_COPS_MOD mode,
+
−                                   T_ACI_COPS_FRMT format,
+
−                                   CHAR * oper )
+
−{
+
−
+
−  T_MM_CMD_PRM * pMMCmdPrm;  /* points to MM command parameters */
+
−
+
−
+
−  T_ACI_NRG_RGMD regMode; /*NRG Registration mode */
+
−  T_ACI_NRG_FRMT regFormat; 
+
−  T_ACI_NRG_SVMD  svrMode;
+
−
+
−
+
−  TRACE_FUNCTION ("sAT_PercentCOPS()");
+
−
+
−
+
−  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
−  mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode;
+
−  
+
−/*
+
−  *  check MM entity status
+
−  */
+
−  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+
−
+
−    return( AT_BUSY );
+
−
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * convert  format to NRG type
+
− *-------------------------------------------------------------------
+
− */
+
−
+
−
+
−if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt;
+
−
+
−  
+
−  switch( format )
+
−  {
+
−    case(    COPS_FRMT_NotPresent): 
+
−    regFormat = NRG_FRMT_NotPresent; 
+
−    break;
+
−    case(   COPS_FRMT_Numeric ): 
+
−    regFormat =NRG_FRMT_Numeric ; 
+
−    break;
+
−    case( COPS_FRMT_Short):
+
−    regFormat = NRG_FRMT_Short; 
+
−    break;
+
−    case( COPS_FRMT_Long):
+
−    regFormat = NRG_FRMT_Long; 
+
−    break;
+
−    default:
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−  }
+
−
+
−pMMCmdPrm -> COPSfrmt = format;
+
−
+
−
+
−/*
+
−  * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required.
+
−  * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(),  is set. 
+
−  */
+
−
+
−
+
−if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode;
+
−
+
−switch( mode )
+
−  {
+
−    case( COPS_MOD_NotPresent   ): 
+
−    regMode = NRG_RGMD_NotPresent; 
+
−    svrMode = NRG_SVMD_NotPresent;
+
−    break;
+
−    case(  COPS_MOD_Auto  ): 
+
−    regMode =NRG_RGMD_Auto ; 
+
−    svrMode = NRG_SVMD_Full;    
+
−    break;
+
−    case(  COPS_MOD_Man):
+
−    regMode = NRG_RGMD_Manual; 
+
−    svrMode = NRG_SVMD_Full;    
+
−    break;
+
−    case(  COPS_MOD_Dereg):
+
−    regMode = NRG_RGMD_Dereg; 
+
−    svrMode = NRG_SVMD_Limited;    
+
−    break;
+
−    case(   COPS_MOD_Both ): 
+
−    regMode = NRG_RGMD_Both; 
+
−    svrMode = NRG_SVMD_Full; 
+
−    break;
+
−    case(COPS_MOD_SetOnly):  /*This mode can be fully handled in this function */
+
−       /* DO NOT SET mmShrdPrm.COPSmode !!! */
+
−      pMMCmdPrm -> COPSfrmt = format;
+
−      return AT_CMPL;
+
−    default:
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−  }
+
−
+
−mmShrdPrm.COPSmode = mode;
+
−
+
−
+
−  
+
−
+
−/* Set the value of the current command executed */
+
−mmEntStat.curCmd  = AT_CMD_P_COPS;  
+
−
+
−return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper);
+
−  
+
−}
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PlusWS46             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the +WS46 AT
+
−            command which is responsible to select wireless network.
+
−
+
−            <mode>: network mode.
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusWS46   (T_ACI_CMD_SRC srcId,
+
−                                    T_ACI_WS46_MOD mode )
+
−{
+
−
+
−  TRACE_FUNCTION ("sAT_PlusWS46()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * process the value parameter
+
− *-------------------------------------------------------------------
+
− */
+
−  if( mode NEQ ACI_NumParmNotPresent )
+
−  {
+
−    if( mode NEQ WS46_MOD_Gsm )
+
−    {
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−    }
+
−  }
+
−
+
−  return( AT_CMPL );
+
−}
+
−
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : tAT_PercentALS           |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %ALS AT command
+
−            which is responsible for testing if ALS mode is present.
+
−            (always if an E-Plus Sim-card is detected or the if the CSP
+
−            field is present on the inserted Sim-card and enables
+
−            ALS mode).
+
−
+
−            
+
−*/
+
−GLOBAL T_ACI_RETURN tAT_PercentALS  ( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *ALSmode )
+
−
+
−{ 
+
−  TRACE_FUNCTION ("tAT_PercentALS()");
+
−
+
−  if( !cmh_IsVldCmdSrc( srcId ) )
+
−  {
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−#if defined(FF_BAT) && defined(_SIMULATION_)
+
−  /* test command %ALS is not used anymore by BAT.lib, change CMD MODE only for host tests */
+
−  if(aci_cmd_src_mode_get(srcId) EQ CMD_MODE_BAT)
+
−  {
+
−    aci_cmd_src_mode_set((UBYTE)srcId, CMD_MODE_ATI);
+
−  }
+
−#endif /* FF_BAT && _SIMULATION_ */  
+
−
+
−  /* E-Plus SIM-Card inserted (mcc=0x262, mnc=0x03) ? */
+
−  if (cmhSIM_plmn_is_hplmn(0x262, 0x03F))
+
−  {
+
−    *ALSmode = ALS_MOD_SPEECH | ALS_MOD_AUX_SPEECH;
+
−    return (AT_CMPL);
+
−  }
+
−
+
−  simEntStat.curCmd = AT_CMD_ALS;
+
−  simEntStat.entOwn = simShrdPrm.owner = srcId;
+
−
+
−  ccShrdPrm.als_cmd = ALS_CMD_TEST;
+
−  *ALSmode = ALS_MOD_NOTPRESENT;
+
−
+
−  cmhCC_checkALS_Support();
+
−  return (AT_EXCT);
+
−}
+
−
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentNRG           |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %NRG AT command
+
−            which is responsible for the setting of registration mode
+
−            and service mode.
+
−
+
−            <regMode>: registration mode.
+
−            <srvMode>: service mode.
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentNRG( T_ACI_CMD_SRC  srcId,
+
−                                    T_ACI_NRG_RGMD regMode,
+
−                                    T_ACI_NRG_SVMD srvMode,
+
−                                    T_ACI_NRG_FRMT oprFrmt,
+
−                                    CHAR          *opr)
+
−{
+
−  T_MM_CMD_PRM * pMMCmdPrm;  /* points to MM command parameters */
+
−
+
− 
+
−  TRACE_FUNCTION ("sAT_PercentNRG()");
+
−
+
−
+
−  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
−
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check MM entity status
+
− *-------------------------------------------------------------------
+
− */
+
−  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+
−
+
−    return( AT_BUSY );
+
−
+
−
+
−
+
−
+
− /*
+
− *-------------------------------------------------------------------
+
− * process the oprFrmt,svrMode and regMode parameters
+
− *-------------------------------------------------------------------
+
− */
+
−  switch( oprFrmt )
+
−  {
+
−    case( NRG_FRMT_NotPresent ):
+
−      oprFrmt = pMMCmdPrm -> NRGoprFrmt;
+
−      break;
+
−    case( NRG_FRMT_Long  ):
+
−    case( NRG_FRMT_Short ):
+
−    case( NRG_FRMT_Numeric ):
+
−      break;
+
−    default:
+
−      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−      return( AT_FAIL );
+
−  }   
+
−
+
−  if( srvMode EQ NRG_SVMD_NotPresent ) 
+
−    srvMode=pMMCmdPrm->NRGregMode;
+
−
+
−  if( regMode EQ NRG_RGMD_NotPresent ) 
+
−    regMode=pMMCmdPrm->NRGregMode;
+
−
+
−
+
−
+
−/* Set the value of the current command executed */
+
−  mmEntStat.curCmd  = AT_CMD_NRG;  
+
−
+
−
+
−  return cmhMM_OperatorSelect(srcId,regMode,srvMode,oprFrmt,opr);
+
−}
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                  |
+
−| STATE   : code                    ROUTINE : sAT_PercentCSQ             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the function for Signal Quality 
+
−  Param:
+
−  srcId:    command ID;
+
−  CSQmode:  enable(1) or disable(0) CSQ
+
−
+
−  Shen,Chao
+
−  Juni.13th, 2003
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentCSQ( T_ACI_CMD_SRC  srcId,
+
−                                    T_ACI_CSQ_MODE CSQmode)
+
−{
+
−
+
−  T_MM_CMD_PRM  * pMMCmdPrm;  /* points to MM command parameters */
+
−
+
−  if( !cmh_IsVldCmdSrc( srcId ) )
+
−  {
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
−
+
−  switch(CSQmode)
+
−  {
+
−    case( CSQ_Enable):
+
−    {
+
−      if ( pMMCmdPrm->CSQworkStat == CSQ_Enable )
+
−      {
+
−        TRACE_EVENT("CSQ is already enabled");
+
−      }
+
−      else
+
−      {
+
−        cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Enable;
+
−        if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) &&
+
−            (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam != CMER_INDICATOR_2) )
+
−        { /* rx_Init() not yet called from CIND service */
+
−#ifndef _SIMULATION_
+
−          rx_Init(rx_Cb);
+
−#endif /* _SIMULATION_ */
+
−        }
+
−      }
+
−      break;
+
−    }
+
−
+
−    case(CSQ_Disable):
+
−    {
+
−      if ( pMMCmdPrm->CSQworkStat == CSQ_Enable )
+
−      {
+
−        cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Disable;
+
−        if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) &&
+
−            (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam != CMER_INDICATOR_2)  )
+
−        { /* CIND service inactive -> no more reading the signal strength necessary */
+
−#ifndef _SIMULATION_
+
−        rx_Init(NULL);
+
−#endif /* _SIMULATION_ */
+
−        }
+
−      }
+
−      break;
+
−    }
+
−    default:
+
−      return(AT_FAIL);
+
−  }
+
−  return( AT_CMPL);
+
−}
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                |
+
−| STATE   : code                    ROUTINE : sAT_Plus CIND          |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the function to setup the indications toward
+
−            terminal
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusCIND( T_ACI_CMD_SRC  srcId,
+
−                                       T_ACI_CIND_SIGNAL_TYPE  sCindSgnalSettings,
+
−                                       T_ACI_CIND_SMSFULL_TYPE sCindSmsFullSettings )
+
−{
+
−  T_ACI_MM_CIND_VAL_TYPE  *pMMCindPrm;
+
−  T_ACI_MM_CMER_VAL_TYPE  *pMMCmerPrm;
+
−  T_ACI_CIND_SIGNAL_TYPE   sOldSignalSetting;
+
−  T_ACI_CIND_SMSFULL_TYPE  sOldSmsFullSetting;
+
−
+
−  TRACE_EVENT( "sAT_PlusCIND()" );
+
−
+
−  if( !cmh_IsVldCmdSrc( srcId ) )
+
−  {
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
+
−  pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
+
−
+
−  if( sCindSgnalSettings   == CIND_SIGNAL_INDICATOR_INVALID || 
+
−      sCindSmsFullSettings == CIND_SMSFULL_INDICATOR_INVALID )
+
−  {
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  sOldSignalSetting            = pMMCindPrm->sCindSignalParam;
+
−  sOldSmsFullSetting           = pMMCindPrm->sCindSmsFullParam;
+
−  pMMCindPrm->sCindSignalParam  = sCindSgnalSettings;
+
−  pMMCindPrm->sCindSmsFullParam = sCindSmsFullSettings;
+
−
+
−  /* ----------------- signal strength setting part ------------------------ */
+
−  if( sOldSignalSetting <= CIND_SIGNAL_INDICATOR_LVL0 )
+
−  { /* the old (previews) signal setting is off */
+
−    if( (sCindSgnalSettings > CIND_SIGNAL_INDICATOR_LVL0) && 
+
−        (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) && 
+
−        (pMMCmerPrm->sCmerIndParam != CMER_INDICATOR_2) )
+
−    { /* greather LVL0 --> rx_Init must be initialize... */
+
−#ifndef _SIMULATION_
+
−      rx_Init(rx_Cb);
+
−#endif /* _SIMULATION_ */
+
−    }
+
−  }
+
−  else
+
−  { /* the old (previews) signal setting is on */
+
−    if( (sCindSgnalSettings == CIND_SIGNAL_INDICATOR_LVL0) &&
+
−        (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) &&
+
−        (pMMCmerPrm->sCmerIndParam != CMER_INDICATOR_2) )
+
−    { /* LVL0 --> rx_Init must be reset... */
+
−#ifndef _SIMULATION_
+
−        rx_Init(NULL);
+
−#endif /* _SIMULATION_ */
+
−    }
+
−  }
+
−  return(AT_CMPL);
+
−}
+
−
+
−/* 
+
−+--------------------------------------------------------------------+
+
−| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                |
+
−| STATE   : code                    ROUTINE : sAT_Plus CMER          |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the function to setup the buffer control for the 
+
−            indications toward terminal equipment
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusCMER( T_ACI_CMD_SRC  srcId,
+
−                                       T_ACI_CMER_MODE_TYPE sCmerModeSettings,
+
−                                       T_ACI_CMER_IND_TYPE sCmerIndicationSettings,
+
−                                       T_ACI_CMER_BFR_TYPE sCmerBfrSettings )
+
−{
+
−  T_ACI_MM_CMER_VAL_TYPE  *pMMCmerPrm;
+
−  T_ACI_MM_CIND_VAL_TYPE  *pMMCindPrm;
+
−  T_ACI_CMER_IND_TYPE      sOldCmerIndSetting;
+
−
+
−  TRACE_EVENT( "sAT_PlusCMER()" );
+
−
+
−  if( !cmh_IsVldCmdSrc( srcId ) )
+
−  {
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
+
−  pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
+
−
+
−  sOldCmerIndSetting        = pMMCmerPrm->sCmerIndParam;
+
−  if( sCmerModeSettings != CMER_MODE_INVALID )
+
−  {
+
−    pMMCmerPrm->sCmerModeParam = sCmerModeSettings;
+
−  }
+
−  if( sCmerIndicationSettings != CMER_INDICATOR_INVALID )
+
−  {
+
−    pMMCmerPrm->sCmerIndParam  = sCmerIndicationSettings;
+
−  }
+
−  if( sCmerBfrSettings != CMER_BFR_INVALID )
+
−  {
+
−    pMMCmerPrm->sCmerBfrParam  = sCmerBfrSettings;
+
−  }
+
−
+
−  /* ---------------- maybe switch on all indication settings ------------- */
+
−  if( sOldCmerIndSetting != CMER_INDICATOR_2 )
+
−  { /* the old (previews) indicator setting is 'off' */
+
−    if( (sCmerIndicationSettings == CMER_INDICATOR_2) && 
+
−        (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) && 
+
−        (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
+
−    { /* all indications must be show --> rx_Init must be initialize... */
+
−#ifndef _SIMULATION_
+
−      rx_Init(rx_Cb);
+
−#endif /* _SIMULATION_ */
+
−    }
+
−  }
+
−  else
+
−  { /* the old (previews) signal setting is on */
+
−    if( (sCmerIndicationSettings != CMER_INDICATOR_2) &&
+
−        (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) &&
+
−        (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
+
−    { /* LVL0 --> rx_Init must be reset... */
+
−#ifndef _SIMULATION_
+
−        rx_Init(NULL);
+
−#endif /* _SIMULATION_ */
+
−    }
+
−  }
+
−
+
−  return(AT_CMPL);
+
−}
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                  |
+
−| STATE   : code                    ROUTINE : sAT_PercentCSQ             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the callback function for Signal Quality 
+
−  Param:
+
−  signal_params   callback function name
+
−
+
−  Shen,Chao
+
−  Juni.13th, 2003
+
−*/
+
−
+
−#ifndef _SIMULATION_
+
−LOCAL void rx_Cb (drv_SignalID_Type *signal_params)
+
−{
+
−    rx_Status_Type *para = NULL;
+
−
+
−    TRACE_EVENT("rx_Cb()");
+
−
+
−    ACI_MALLOC(para,sizeof(rx_Status_Type));
+
−
+
−    para->actLevel = ((rx_Status_Type *) signal_params->UserData)->actLevel;
+
−    para->gsmLevel = ((rx_Status_Type *) signal_params->UserData)->gsmLevel;
+
−    para->rxQuality = ((rx_Status_Type *) signal_params->UserData)->rxQuality;
+
−        
+
−    if (!cmh_set_delayed_call (rx_sequence_Cb, (void *)para))
+
−    {
+
−      TRACE_EVENT("Error, can not set the delayed resequence callback for %CSQ");
+
−      ACI_MFREE(para);
+
−      return ;
+
−    }
+
−
+
−    TRACE_EVENT("delayed requence call back requested: 100 ms");
+
−    cmh_start_delayed_call (20);
+
−
+
−    return;   
+
−    
+
−}
+
−#endif /* _SIMULATION_ */
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : ACI/MMI          MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentCSQ             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the delayed callback function for Signal Quality 
+
−  Shen,Chao
+
−  Juni.13th, 2003
+
−*/
+
−#ifndef _SIMULATION_
+
−LOCAL UCHAR rx_sequence_Cb (void* arg)
+
−{
+
−  int  i;
+
−  UBYTE rssi;
+
−  UBYTE ber;
+
−  T_ACI_CIND_SIGNAL_TYPE sSignalStrength;
+
−  T_ACI_MM_CIND_VAL_TYPE sIndValues;
+
−
+
−  struct rx_Status_Type* tmp_p = (struct rx_Status_Type*) arg;
+
−  
+
−  TRACE_EVENT("rx_sequence_Cb()");
+
−
+
−  sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
+
−
+
−  if ( tmp_p->gsmLevel EQ 0xFF OR tmp_p->gsmLevel EQ 0 )
+
−  {
+
−    rssi = ACI_RSSI_FAULT;
+
−    sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
+
−  }
+
−  else if ( tmp_p->gsmLevel > 59 )
+
−  {
+
−    rssi = 31;
+
−  }
+
−  else
+
−  {
+
−    rssi = ( tmp_p->gsmLevel / 2 ) + 2;
+
−  }
+
−
+
−  if ( tmp_p->rxQuality EQ RX_QUAL_UNAVAILABLE )
+
−  {
+
−    ber = ACI_BER_FAULT;
+
−  }
+
−  else
+
−  {
+
−    ber = tmp_p->rxQuality;
+
−  }  
+
−
+
−  for( i = CMD_SRC_LCL; i < CMD_SRC_MAX; i++)
+
−  {
+
−    if (cmhPrm[i].mmCmdPrm.CSQworkStat EQ CSQ_Enable)
+
−    {
+
−      R_AT (RAT_CSQ, i) (rssi,ber,tmp_p->actLevel);
+
−    }
+
−    /* ==================== process the service of +CIEV ========================== */
+
−    sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
+
−    if( tmp_p->gsmLevel >= 11 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL1; };
+
−    if( tmp_p->gsmLevel >= 21 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL2; };
+
−    if( tmp_p->gsmLevel >= 32 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL3; };
+
−    if( tmp_p->gsmLevel >= 42 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL4; };
+
−    if( tmp_p->gsmLevel >= 52 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL5; };
+
−    sIndValues.sCindSignalParam = sSignalStrength;
+
−    sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
+
−    if( ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam > CIND_SIGNAL_INDICATOR_LVL0) &&
+
−         (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam >= sIndValues.sCindSignalParam) &&
+
−          (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam == CMER_INDICATOR_2)) || 
+
−        ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam < sIndValues.sCindSignalParam) &&
+
−          (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam == CMER_INDICATOR_1)) )
+
−    {
+
−      TRACE_EVENT("send +CIEV");
+
−      R_AT (RAT_CIEV, i) ( sIndValues, cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings );
+
−    }
+
−  }
+
−
+
−  if (!cmh_set_delayed_call (NULL, NULL))
+
−  { /* reset this callback pointer -> will be set again via rx_Cb */
+
−    TRACE_EVENT("Can not reset the delayed resequence callback for %CSQ");
+
−    return FALSE;
+
−  }
+
−  ACI_MFREE(tmp_p);
+
−
+
−  return TRUE;    
+
−}
+
−#endif /* _SIMULATION_ */
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentCHPL          |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %CHPL AT command
+
−            which will return the list of entries in EF_HPLMNwAcT.
+
−
+
−            <mode>:   registration mode.
+
−            <format>: format of operator selection
+
−            <oper>:   operator string
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentCHPL ( T_ACI_CMD_SRC srcId,
+
−                                      T_ACI_OPER_NTRY *oper )
+
−{
+
−  T_OPER_ENTRY   plmnDesc;
+
−  BOOL           found;
+
−  SHORT          mccBuf;
+
−  SHORT          mncBuf;
+
−
+
−  TRACE_FUNCTION ("sAT_PlusCHPL()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check whether SIM is ready 
+
− *-------------------------------------------------------------------
+
− */
+
−  if (!cmhSMS_checkSIM ())
+
−  {
+
−    return AT_FAIL;
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PercentCHPL(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−  if(!cmhMM_GetActingHPLMN(&mccBuf, &mncBuf))/* Enhancement Acting HPLMN*/
+
−  {
+
−    cmhSIM_GetHomePLMN (&mccBuf, &mncBuf);
+
−  }
+
−
+
−  found = cmhMM_FindPLMN (&plmnDesc, mccBuf, mncBuf, NOT_PRESENT_16BIT, FALSE);
+
−  if (!found)
+
−  {
+
−    TRACE_EVENT_P2("sAT_PercentCHPL(): MCC/MN not found in database (0x%X, 0x%X", mccBuf, mncBuf);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal);
+
−    return( AT_FAIL );
+
−  }
+
−
+
−  strcpy (oper->longName, plmnDesc.longName);
+
−  strcpy (oper->shrtName, plmnDesc.shrtName);
+
−  oper->mcc = plmnDesc.mcc;
+
−  oper->mnc = plmnDesc.mnc;
+
−  oper->pnn = plmnDesc.pnn;
+
−  oper->long_len = plmnDesc.long_len;
+
−  oper->shrt_len = plmnDesc.shrt_len;
+
−
+
−  return (AT_CMPL);
+
−}
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PlusCTZR             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the +CTZR AT command
+
−            which will set the status of CTZRmode, indicating whether time
+
−            zone change rep[orting is enabled or disabled.
+
−
+
−            <on/off>:   Indicates whether time zone reporting is enabled or disabled.
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_CTZR_MODE mode)
+
−{
+
−  TRACE_FUNCTION ("sAT_PlusCTZR()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * process the mode parameter
+
− *-------------------------------------------------------------------
+
− */
+
−  switch (mode)
+
−  {
+
−    case CTZR_MODE_OFF:
+
−    case CTZR_MODE_ON:
+
−       cmhPrm[srcId].mmCmdPrm.CTZRMode = mode;
+
−       break;
+
−
+
−    default:
+
−       TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid mode: %d", mode);
+
−       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−       return( AT_FAIL );
+
−  }
+
−  
+
−  return( AT_CMPL );
+
−}
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PlusCTZU             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the +CTZU AT command
+
−            which will set the status of CTZUmode, indicating whether automatic time
+
−            zone update is enabled or disabled.
+
−
+
−            <on/off>:   Indicates whether automatic time zone update is enabled or disabled.
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_CTZU_MODE mode)
+
−{
+
−  TRACE_FUNCTION ("sAT_PlusCTZU()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * process the mode parameter
+
− *-------------------------------------------------------------------
+
− */
+
−  switch (mode)
+
−  {
+
−    case CTZU_MODE_OFF:
+
−    case CTZU_MODE_ON:
+
−       cmhPrm[srcId].mmCmdPrm.CTZUMode = mode;
+
−       break;
+
−
+
−    default:
+
−       TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid mode: %d", mode);
+
−       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−       return( AT_FAIL );
+
−  }
+
−  
+
−  return( AT_CMPL );
+
−}
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT :                       MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PlusCCLK             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the +CCLK AT command
+
−            which will set the real time clock of the ME
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_RTC_DATE *date_s,
+
−                                   T_ACI_RTC_TIME *time_s,
+
−                                   int timeZone
+
−                                 )
+
−{
+
−#ifndef _SIMULATION_
+
−  UBYTE  ret;
+
−#endif /* _SIMULATION_ */
+
−
+
−  TRACE_FUNCTION ("sAT_PlusCCLK()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PlusCCLK(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * Set the time in the RTC 
+
− *-------------------------------------------------------------------
+
− */
+
−#ifndef _SIMULATION_
+
−  ret = rtc_set_time_date( (T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s);
+
−
+
−  switch (ret)
+
−  {
+
−    case 0:                     /* RVF_OK. Date and time set ok*/
+
−#ifndef FF_TIMEZONE
+
−      return( AT_CMPL );
+
−#else  /* FF_TIMEZONE */
+
−      ret = RTC_SetCurrentTZ(timeZone); /* Set current timezone now time and date are set.*/
+
−      switch (ret)
+
−      {
+
−        case 0:                /* RVF_OK. RTC current TZ set ok*/
+
−          return( AT_CMPL );
+
−
+
−        default:
+
−          TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR1: %d", ret);  /* RTC setting failed */
+
−          return( AT_FAIL );
+
−      }
+
−#endif /* FF_TIMEZONE */
+
−
+
−    default:     /* RVF_NOT_READY or RVF_INTERNAL ERROR or RVF_INVALID_PARAMETER */
+
−      TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR2: %d", ret);  /* Date and time setting failed */
+
−      return( AT_FAIL );
+
−  }
+
−#else /* _SIMULATION_ */
+
−  return( AT_CMPL );
+
−#endif /* _SIMULATION_ */
+
−
+
−}
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentCTZV             |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %CTZV AT command
+
−            which will set the status of PCTZVmode, indicating whether time and date report
+
−            is enabled or disabled.
+
−
+
−            <on/off>:   Indicates whether time and date report is enabled or disabled.
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_PCTZV_MODE mode)
+
−{
+
−  TRACE_FUNCTION ("sAT_PercentCTZV()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * process the mode parameter
+
− *-------------------------------------------------------------------
+
− */
+
−  switch (mode)
+
−  {
+
−    case PCTZV_MODE_OFF:
+
−    case PCTZV_MODE_ON:
+
−       cmhPrm[srcId].mmCmdPrm.PCTZVMode = mode;
+
−       break;
+
−
+
−    default:
+
−       TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid mode: %d", mode);
+
−       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−       return( AT_FAIL );
+
−  }
+
−  
+
−  return( AT_CMPL );
+
−}
+
−
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentCNIV                |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the %CNIV AT command
+
−            which will set the status of CNIVmode, indicating whether time and date report
+
−            is enabled or disabled.
+
−
+
−            <on/off>:   Indicates whether time and date report is enabled or disabled.
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
+
−                                   T_ACI_CNIV_MODE mode)
+
−{
+
−  TRACE_FUNCTION ("sAT_PercentCNIV()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * process the mode parameter
+
− *-------------------------------------------------------------------
+
− */
+
−  switch (mode)
+
−  {
+
−    case CNIV_MODE_OFF:
+
−    case CNIV_MODE_ON:
+
−       cmhPrm[srcId].mmCmdPrm.CNIVMode = mode;
+
−       break;
+
−
+
−    default:
+
−       TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid mode: %d", mode);
+
−       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−       return( AT_FAIL );
+
−  }
+
−  
+
−  return( AT_CMPL );
+
−}
+
−
+
−/*
+
−+--------------------------------------------------------------------+
+
−| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+
−| STATE   : code                  ROUTINE : sAT_PercentCWUP          |
+
−+--------------------------------------------------------------------+
+
−
+
−  PURPOSE : This is the functional counterpart to the +CWUP AT command
+
−                   which will force RR to trigger a power campaign.
+
−
+
−*/
+
−
+
−GLOBAL T_ACI_RETURN sAT_PercentCWUP ( T_ACI_CMD_SRC srcId, T_ACI_CWUP_TYPE type )
+
−{
+
−  TRACE_FUNCTION ("sAT_PercentCWUP()");
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check command source
+
− *-------------------------------------------------------------------
+
− */
+
−  if(!cmh_IsVldCmdSrc (srcId))
+
−  {
+
−    TRACE_EVENT_P1("sAT_PercentCWUP(): Invalid source: %d", srcId);
+
−    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+
−    return( AT_FAIL );
+
−  }
+
−
+
−/*
+
− *-------------------------------------------------------------------
+
− * check entity status
+
− *-------------------------------------------------------------------
+
− */
+
−  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+
−  {
+
−    TRACE_EVENT("sAT_PercentCWUP(): MM is busy");    
+
−    return( AT_BUSY );
+
−  }
+
−
+
−  wake_up_rr();
+
−  
+
−  return( AT_CMPL );
+
−}
+
−
+
−
+
−/*==== EOF ========================================================*/