FreeCalypso > hg > fc-magnetite
view src/cs/layer1/include/l1_signa.h @ 702:9394305d4ff5 default tip
etm_audio.c: fix off-by-one error in auw of FIR coefficients
This fix was already made in FC Tourmaline a while back, but it is also
the kind of bugfix that deserves to be backported to Magnetite and
Selenite as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 31 Oct 2022 00:14:44 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_SIGNA.H * * Filename l1_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_L1C 0 #define P_DLL ( P_L1C + 1 ) // Messages Test/PWRMNGT <-> L1A #if (OP_L1_STANDALONE == 1) /* Message used for hardware dynamic configuration */ #define TST_HW_CONFIG_REQ ( ( P_L1C << 8 ) | 116) #endif #define TST_TEST_HW_REQ ( ( P_L1C << 8 ) | 1 ) #define TST_TEST_HW_CON ( ( P_L1C << 8 ) | 2 ) #define TST_TIMESTAMP_MSG ( ( P_L1C << 8 ) | 3 ) #define TST_SLEEP_REQ ( ( P_L1C << 8 ) | 4 ) // Messages L3 <-> L1A #define MPHC_RXLEV_REQ ( ( P_L1C << 8 ) | 11 ) #define MPHC_RXLEV_IND ( ( P_L1C << 8 ) | 12 ) #define MPHC_STOP_RXLEV_REQ ( ( P_L1C << 8 ) | 13 ) #define MPHC_STOP_RXLEV_CON ( ( P_L1C << 8 ) | 14 ) #define MPHC_NETWORK_SYNC_REQ ( ( P_L1C << 8 ) | 15 ) #define MPHC_NETWORK_SYNC_IND ( ( P_L1C << 8 ) | 16 ) #define MPHC_STOP_NETWORK_SYNC_REQ ( ( P_L1C << 8 ) | 17 ) #define MPHC_STOP_NETWORK_SYNC_CON ( ( P_L1C << 8 ) | 18 ) #define MPHC_NEW_SCELL_REQ ( ( P_L1C << 8 ) | 19 ) #define MPHC_NEW_SCELL_CON ( ( P_L1C << 8 ) | 20 ) #define MPHC_START_CCCH_REQ ( ( P_L1C << 8 ) | 21 ) #define MPHC_STOP_CCCH_REQ ( ( P_L1C << 8 ) | 22 ) #define MPHC_STOP_CCCH_CON ( ( P_L1C << 8 ) | 23 ) #define MPHC_SCELL_NBCCH_REQ ( ( P_L1C << 8 ) | 24 ) #define MPHC_SCELL_EBCCH_REQ ( ( P_L1C << 8 ) | 25 ) #define MPHC_STOP_SCELL_BCCH_REQ ( ( P_L1C << 8 ) | 26 ) #define MPHC_STOP_SCELL_BCCH_CON ( ( P_L1C << 8 ) | 27 ) #define MPHC_NCELL_BCCH_REQ ( ( P_L1C << 8 ) | 28 ) #define MPHC_NCELL_BCCH_IND ( ( P_L1C << 8 ) | 29 ) #define MPHC_STOP_NCELL_BCCH_REQ ( ( P_L1C << 8 ) | 30 ) #define MPHC_STOP_NCELL_BCCH_CON ( ( P_L1C << 8 ) | 31 ) #define MPHC_NCELL_SYNC_REQ ( ( P_L1C << 8 ) | 32 ) #define MPHC_NCELL_SYNC_IND ( ( P_L1C << 8 ) | 33 ) #define MPHC_STOP_NCELL_SYNC_REQ ( ( P_L1C << 8 ) | 34 ) #define MPHC_STOP_NCELL_SYNC_CON ( ( P_L1C << 8 ) | 35 ) #define MPHC_RXLEV_PERIODIC_REQ ( ( P_L1C << 8 ) | 36 ) #define MPHC_RXLEV_PERIODIC_IND ( ( P_L1C << 8 ) | 37 ) #define MPHC_STOP_RXLEV_PERIODIC_REQ ( ( P_L1C << 8 ) | 38 ) #define MPHC_STOP_RXLEV_PERIODIC_CON ( ( P_L1C << 8 ) | 39 ) #define MPHC_CONFIG_CBCH_REQ ( ( P_L1C << 8 ) | 40 ) #define MPHC_CBCH_SCHEDULE_REQ ( ( P_L1C << 8 ) | 41 ) #define MPHC_CBCH_UPDATE_REQ ( ( P_L1C << 8 ) | 42 ) #define MPHC_CBCH_INFO_REQ ( ( P_L1C << 8 ) | 43 ) #define MPHC_STOP_CBCH_REQ ( ( P_L1C << 8 ) | 44 ) #define MPHC_STOP_CBCH_CON ( ( P_L1C << 8 ) | 45 ) #define MPHC_RA_REQ ( ( P_L1C << 8 ) | 46 ) #define MPHC_RA_CON ( ( P_L1C << 8 ) | 47 ) #define MPHC_STOP_RA_REQ ( ( P_L1C << 8 ) | 48 ) #define MPHC_STOP_RA_CON ( ( P_L1C << 8 ) | 49 ) #define MPHC_DATA_IND ( ( P_L1C << 8 ) | 50 ) #define MPHC_IMMED_ASSIGN_REQ ( ( P_L1C << 8 ) | 51 ) #define MPHC_CHANNEL_ASSIGN_REQ ( ( P_L1C << 8 ) | 52 ) #define MPHC_ASYNC_HO_REQ ( ( P_L1C << 8 ) | 53 ) #define MPHC_SYNC_HO_REQ ( ( P_L1C << 8 ) | 54 ) #define MPHC_PRE_SYNC_HO_REQ ( ( P_L1C << 8 ) | 55 ) #define MPHC_PSEUDO_SYNC_HO_REQ ( ( P_L1C << 8 ) | 56 ) #define MPHC_STOP_DEDICATED_REQ ( ( P_L1C << 8 ) | 57 ) #define MPHC_STOP_DEDICATED_CON ( ( P_L1C << 8 ) | 128 ) #define MPHC_CHANGE_FREQUENCY_CON ( ( P_L1C << 8 ) | 58 ) #define MPHC_ASYNC_HO_CON ( ( P_L1C << 8 ) | 59 ) #define MPHC_CHANNEL_ASSIGN_CON ( ( P_L1C << 8 ) | 60 ) #define MPHC_CHANNEL_MODE_MODIFY_CON ( ( P_L1C << 8 ) | 61 ) #define MPHC_HANDOVER_FAIL_CON ( ( P_L1C << 8 ) | 62 ) #define MPHC_IMMED_ASSIGN_CON ( ( P_L1C << 8 ) | 63 ) #define MPHC_PRE_SYNC_HO_CON ( ( P_L1C << 8 ) | 64 ) #define MPHC_SET_CIPHERING_CON ( ( P_L1C << 8 ) | 65 ) #define MPHC_SYNC_HO_CON ( ( P_L1C << 8 ) | 66 ) #define MPHC_TA_FAIL_IND ( ( P_L1C << 8 ) | 67 ) #define MPHC_HANDOVER_FINISHED ( ( P_L1C << 8 ) | 68 ) #define MPHC_CHANGE_FREQUENCY ( ( P_L1C << 8 ) | 69 ) #define MPHC_CHANNEL_MODE_MODIFY_REQ ( ( P_L1C << 8 ) | 70 ) #define MPHC_HANDOVER_FAIL_REQ ( ( P_L1C << 8 ) | 71 ) #define MPHC_SET_CIPHERING_REQ ( ( P_L1C << 8 ) | 72 ) #define MPHC_MEAS_REPORT ( ( P_L1C << 8 ) | 73 ) #define MPHC_UPDATE_BA_LIST ( ( P_L1C << 8 ) | 74 ) #define MPHC_NCELL_FB_SB_READ ( ( P_L1C << 8 ) | 75 ) #define MPHC_NCELL_SB_READ ( ( P_L1C << 8 ) | 76 ) #define MPHC_NCELL_BCCH_READ ( ( P_L1C << 8 ) | 77 ) // Messages L1S -> L1A #define L1C_VALID_MEAS_INFO ( ( P_L1C << 8 ) | 80 ) #define L1C_FB_INFO ( ( P_L1C << 8 ) | 81 ) #define L1C_SB_INFO ( ( P_L1C << 8 ) | 82 ) #define L1C_SBCONF_INFO ( ( P_L1C << 8 ) | 83 ) #define L1C_BCCHS_INFO ( ( P_L1C << 8 ) | 84 ) #define L1C_BCCHN_INFO ( ( P_L1C << 8 ) | 85 ) #define L1C_NP_INFO ( ( P_L1C << 8 ) | 86 ) #define L1C_EP_INFO ( ( P_L1C << 8 ) | 87 ) #define L1C_ALLC_INFO ( ( P_L1C << 8 ) | 88 ) #define L1C_RXLEV_PERIODIC_DONE ( ( P_L1C << 8 ) | 89 ) #define L1C_CB_INFO ( ( P_L1C << 8 ) | 90 ) #define L1C_RA_DONE ( ( P_L1C << 8 ) | 91 ) #define L1C_SACCH_INFO ( ( P_L1C << 8 ) | 92 ) #define L1C_MEAS_DONE ( ( P_L1C << 8 ) | 93 ) #define L1C_DEDIC_DONE ( ( P_L1C << 8 ) | 94 ) #define L1C_HANDOVER_FINISHED ( ( P_L1C << 8 ) | 95 ) #define L1C_REDEF_DONE ( ( P_L1C << 8 ) | 96 ) #define L1C_STOP_DEDICATED_DONE ( ( P_L1C << 8 ) | 129 ) // Messages O&M <-> L1A #define OML1_CLOSE_TCH_LOOP_REQ ( ( P_L1C << 8 ) | 97 ) #define OML1_OPEN_TCH_LOOP_REQ ( ( P_L1C << 8 ) | 98 ) #define OML1_START_DAI_TEST_REQ ( ( P_L1C << 8 ) | 99 ) #define OML1_STOP_DAI_TEST_REQ ( ( P_L1C << 8 ) | 100 ) #define OML1_CLOSE_TCH_LOOP_CON ( ( P_L1C << 8 ) | 101 ) #define OML1_OPEN_TCH_LOOP_CON ( ( P_L1C << 8 ) | 102 ) #define OML1_START_DAI_TEST_CON ( ( P_L1C << 8 ) | 103 ) #define OML1_STOP_DAI_TEST_CON ( ( P_L1C << 8 ) | 104 ) // Message Custom I/F <- L1S #define CST_ADC_RESULT ( ( P_L1C << 8 ) | 105 ) // Messages for trace #define L1_STATS_REQ ( ( P_L1C << 8 ) | 107 ) #define L1_DUMMY_FOR_SIM ( ( P_L1C << 8 ) | 108 ) #define TRACE_DSP_DEBUG ( ( P_L1C << 8 ) | 106 ) #define TRACE_CONFIG ( ( P_L1C << 8 ) | 123 ) #define TRACE_CONDENSED_PDTCH ( ( P_L1C << 8 ) | 124 ) #define TRACE_INFO ( ( P_L1C << 8 ) | 125 ) #define QUICK_TRACE ( ( P_L1C << 8 ) | 126 ) #define TRACE_DSP_AMR_DEBUG ( ( P_L1C << 8 ) | 127 ) #define MPHC_NETWORK_LOST_IND ( ( P_L1C << 8 ) | 110 ) // Messages MMI <-> L1A #define MMI_ADC_REQ ( ( P_L1C << 8 ) | 111 ) #define MMI_STOP_ADC_REQ ( ( P_L1C << 8 ) | 112 ) #define MMI_STOP_ADC_CON ( ( P_L1C << 8 ) | 113 ) #define L1_TEST_HW_INFO ( ( P_L1C << 8 ) | 119 ) // Multi-band selection E-GSM900/DCS1800/PCS1900/GSM850 #define MPHC_INIT_L1_REQ ( ( P_L1C << 8 ) | 114 ) #define MPHC_INIT_L1_CON ( ( P_L1C << 8 ) | 115 ) // MEssage RR -> L1A for Enhanced meas. #if (L1_12NEIGH ==1) #define MPHC_NCELL_LIST_SYNC_REQ ( ( P_L1C << 8 ) | 122 ) #endif // Messages L2 <-> L1A #define PH_DATA_IND ( ( P_DLL << 8 ) | 109 )