FreeCalypso > hg > fc-rfcal-tools

comparison doc/Test-system-interface @ 36:d348d47f8a04

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
doc/Test-system-interface: added commands for Tx power level calibration
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 26 May 2017 16:00:06 +0000
parents bd62be88259d
children 20e2b4571cd6
comparison
equal deleted inserted replaced
35:5c0a6e536c70 36:d348d47f8a04
19 This command directs the RF test system to take a frequency offset measurement 19 This command directs the RF test system to take a frequency offset measurement
20 (vcxo-cal-setup must have been performed previously) and report it back to the 20 (vcxo-cal-setup must have been performed previously) and report it back to the
21 client in the response line. The hint argument after the freq-meas keyword will 21 client in the response line. The hint argument after the freq-meas keyword will
22 be sent by the VCXO calibration program (fc-rfcal-vcxo) to tell the RF test 22 be sent by the VCXO calibration program (fc-rfcal-vcxo) to tell the RF test
23 system what kind of frequency offset measurement is being made, i.e., which step 23 system what kind of frequency offset measurement is being made, i.e., which step
24 in the VCXO calibration sequence is being performed; the hint keywords remain 24 in the VCXO calibration sequence is being performed; see the fc-rfcal-vcxo
25 to be defined. 25 source for the hint keywords.
26
27 txpwr-cal-setup band arfcn
28
29 This command is sent to the TSID to prepare the RF test system for the Tx power
30 level calibration procedure. The first argument after the command keyword is
31 the band to be used (850, 900, 1800 or 1900) and the second argument is the
32 ARFCN in that band on which the DUT will be transmitting.
33
34 power-meas
35
36 This command directs the RF test system to take a power level measurement
37 (txpwr-cal-setup must have been performed previously) and report it back to the
38 client in the response line.
26 39
27 signal-gen-setup band 40 signal-gen-setup band
28 41
29 This command is sent to the TSID to prepare the RF test system for tests in 42 This command is sent to the TSID to prepare the RF test system for tests in
30 which the latter acts as a signal generator. The argument after the command 43 which the latter acts as a signal generator. The argument after the command
40 specified Tx power level in dBm. 53 specified Tx power level in dBm.
41 54
42 signal-gen-off 55 signal-gen-off
43 56
44 Turn off the signal generator. 57 Turn off the signal generator.
45
46 The commands for Tx power level calibration remain to be defined.