FreeCalypso > hg > fc-rfcal-tools
comparison README @ 96:ea54469409d4
top README: refer to doc/General-flow
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 17 Jul 2017 19:07:50 +0000 |
parents | b443d0665c1f |
children |
comparison
equal
deleted
inserted
replaced
95:b68301b38ff2 | 96:ea54469409d4 |
---|---|
8 signal generator. If you don't have the necessary RF test equipment, the | 8 signal generator. If you don't have the necessary RF test equipment, the |
9 software alone cannot do anything useful for you. | 9 software alone cannot do anything useful for you. |
10 | 10 |
11 Because the present software is not intended or usable for end users, a fairly | 11 Because the present software is not intended or usable for end users, a fairly |
12 advanced level of skill and understanding is expected from the operator. The | 12 advanced level of skill and understanding is expected from the operator. The |
13 write-ups in the doc subdirectory provide some guidance, but you are expected | 13 write-ups in the doc subdirectory provide some guidance (doc/General-flow is a |
14 to study the source code for yourself to fill in the remaining details. | 14 good place to start), but you are expected to study the source code for yourself |
15 to fill in the remaining details. | |
15 | 16 |
16 The automated calibration software resides in the autocal and cmu200 | 17 The automated calibration software resides in the autocal and cmu200 |
17 subdirectories; the part in the cmu200 subdir is naturally specific to the R&S | 18 subdirectories; the part in the cmu200 subdir is naturally specific to the R&S |
18 CMU200, whereas the part in the autocal subdir is agnostic to the specific type | 19 CMU200, whereas the part in the autocal subdir is agnostic to the specific type |
19 of RF test equipment as long as it provides the needed functionality. If you | 20 of RF test equipment as long as it provides the needed functionality. If you |