FreeCalypso > hg > fc-selenite

comparison src/g23m-gsm/rr/cus_rr.h @ 1:d393cd9bb723

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
src/g23m-*: initial import from Magnetite
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 15 Jul 2018 04:40:46 +0000
parents
children
comparison
equal deleted inserted replaced
0:b6a5e36de839 1:d393cd9bb723
1 /*
2 +-----------------------------------------------------------------------------
3 | Project :
4 | Modul :
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : Custom dependent definitions for RR of the
18 | mobile station
19 +-----------------------------------------------------------------------------
20 */
21
22 #ifndef CUS_RR_H
23 #define CUS_RR_H
24
25 /*==== CONSTANTS ==================================================*/
26 /*
27 * TIMER_VALUES
28 *
29 * Description : The constants define the timer values
30 * for the RR timer TXXX depending on the various
31 * channel types and service access point identifiers.
32 * If your target system uses other units please
33 * change the values.
34 */
35
36 /*
37 * all values in milliseconds independent from the target
38 */
39 #define TRESELECT_VALUE 10000
40 #define TABORT_VALUE 10000
41 #define T3110_VALUE 500
42 #define T3110_SDCCH_VALUE 900
43 #define T3126_VALUE 2500
44 #define T3122_VALUE(a) (1000*(a))
45 #define T_PLMN_SEARCH_VALUE 60000
46
47 /* CSI-LLD section:4.1.3.2
48 * Search mode timer values in seconds
49 */
50 #define TFAST_CS_VALUE 240000
51 #define TNORMAL_CS_VALUE 240000
52
53
54 #define ONE_SEC 1000
55 #define TEN_SEC 10000
56 #define TWENTY_SEC 20000
57 #define THIRTY_SEC 30000
58 #define SIXTY_SEC 60000
59 #define TWO_MIN 120000
60 #define SIX_MIN 360000
61
62 #ifdef TI_PS_FF_AT_P_CMD_CTREG
63 #define T_TEN_SEC 1
64 #define T_TWENTY_SEC 2
65 #define T_THIRTY_SEC 3
66 #define T_SIXTY_SEC 6
67 #define T_TWO_MIN 12
68 #define T_SIX_MIN 36
69 #endif /* TI_PS_FF_AT_P_CMD_CTREG */
70 /*
71 * TIMER IDENTIFIER
72 *
73 * Description : The constants define the identifier of the
74 * timer resources of RR.
75 */
76
77 #define FOUR_FRAMES 4
78
79 #define T3110_NAME "T3110"
80 #define T3122_NAME "T3122"
81 #define T3126_NAME "T3126"
82 #define TRESELECT_NAME "TRESELECT"
83 #define TREG_NAME "TREG"
84 #define TABORT_NAME "TABORT"
85
86 /*
87 * MAX_RR_TIMER
88 *
89 * Description : The constant define the number of timer
90 * available in the timer pool.
91 */
92
93 #define MAX_RR_TIMER 6
94
95 /*
96 * PERIODS OF MEASUREMENT REPORTS
97 *
98 * Description : The constants defines the time between
99 * measurement reports in idle or dedicated
100 * mode as a multiple of 480 ms.
101 */
102 #define PERIODS_OF_480MS_DEDICATED 1
103 #define PERIODS_OF_480MS_IDLE 2
104
105 /*
106 * MEDIUM_RXLEV_THRESHOLD
107 *
108 * Description : The constant defines the RxLev threshold for reasonably
109 * strong carriers
110 */
111
112 #define MEDIUM_RXLEV_THRESHOLD 10
113
114 /*
115 * UPPER_RXLEV_THRESHOLD
116 *
117 * Description : The constant defines the Upper RxLev threshold for
118 * strong carriers
119 */
120
121 #define UPPER_RXLEV_THRESHOLD 20
122
123 /*
124 * MAX_LAI
125 *
126 * Description : The constant defines the length of the forbidden
127 * LAI list.
128 */
129
130 #define MAX_LAI 10
131
132 /*
133 * MAX_RR_STORED_PRIM
134 *
135 * Description : The constant defines the number of primitives stored
136 * in radio resource in parallel.
137 */
138
139
140 /*
141 * DG 1.8.2000
142 * #define MAX_RR_STORED_PRIM 5
143 * Forum G23M-0087, more than 5 prims to store
144 */
145
146 #define MAX_RR_STORED_PRIM 10
147
148
149 /*
150 * FRAME_OFFSET_ZERO
151 *
152 * Description : If the system ensures that the frame offset
153 * for RR message is 24 bits, that means DL
154 * start at offset zero, this option can be used
155 * for an optimized access to the SDU.
156 */
157
158 #undef FRAME_OFFSET_ZERO
159
160 /*
161 * C1 OFFSET
162 *
163 * Description : If no test sim card is inserted, this offset
164 * is added to the calculated c1 value. This
165 * ensures coverage for mobiles with a RF
166 * at the lower border of sensitivity.
167 */
168
169 #define C1_OFFSET 4
170
171 /*
172 * DELAY BEFORE RESET IN CASE NO CONFIGURATION DATA AVAILABLE
173 *
174 * Description : At system start the software tries to read configuration
175 * data from the flash [file system (FFS)] to allow behaviour
176 * fitting to a customer's configuration, e.g. in terms of
177 * HW suport (supported frequency bands, power class etc...)
178 * If no such data can be found the system will reset after
179 * the dalay specified below (unit is milliseconds). A customer
180 * might use this time to download the configuration to the
181 * flash.
182 * Introduced with ConQuest Issue 7510, project G23M.
183 */
184
185 #define DELAY_RESET_NO_CONFIG_DATA 30000
186
187 /*
188 * DELAY BETWEEN NON PARALLEL SEARCH IN LIMITED SERVICE IN ALL FREQ AREA
189 *
190 * Description : When MS enters Limited Service in all freqqurncy are,
191 * Non Parallel search must be used to get back to Full Service.
192 * The following constant identifies the time gap between Non
193 * Parallel search attempts in such a situation following TREG
194 * timer expiry. This time gap is used to allow time for emegency
195 * calls to the user.
196 */
197
198 #define DELAY_NON_PAR_SEARCH_LIM_SER TWO_MIN
199
200 /*
201 * VSI_CALLER
202 *
203 * Description : For multithread applications the constant VSI_CALLER
204 * must be defined to identify the calling thread of the
205 * VSI-Interface. This must be done correponding to the
206 * type of T_VSI_CALLER in VSI.H. The comma symbol is
207 * neccessary because the vsi-functions are called
208 * like this vsi_xxx (VSI_CALLER par2, par3 ...)
209 */
210
211 #ifdef OPTION_MULTITHREAD
212 #define VSI_CALLER rr_handle,
213 #define VSI_CALLER_SINGLE rr_handle
214 #else
215 #define VSI_CALLER
216 #define VSI_CALLER_SINGLE
217 #endif
218
219 #endif