--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/gpf/ccd/freq_list.c	Sun Jul 15 08:11:07 2018 +0000
@@ -0,0 +1,500 @@
+/*
++-----------------------------------------------------------------------------
+|  Project : CCD
+|  Modul   : freq_list.c
++-----------------------------------------------------------------------------
+|  Copyright 2004 Texas Instruments Deutschland GmbH
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Deutschland GmbH 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Deutschland GmbH. 
++-----------------------------------------------------------------------------
+|  Purpose :  Definition of decoding function for FREQ_LIST type
++-----------------------------------------------------------------------------
+*/
+
+#define FREQ_LIST_C
+
+/*
+ * standard definitions like GLOBAL, UCHAR, ERROR etc.
+ */
+#include "typedefs.h"
+#include "header.h"
+
+#include "string.h"
+
+/*
+ * Types and functions for bit access and manipulation
+ */
+#include "ccd_globs.h"
+#include "bitfun.h"
+
+/*
+ * Prototypes of ccd internal functions
+ */
+#include "ccd.h"
+
+/*
+ * Declaration of coder/decoder tables
+ */
+#include "ccdtable.h"
+/*
+ * Function prototypes of CCD-CCDDATA interface 
+ */
+#include "ccddata.h"
+
+
+#if !(defined (CCD_TEST))
+#include "vsi.h"
+#endif
+
+#ifndef RUN_INT_RAM
+/*
+ * Attention: in this file all static and global functions as well as
+ * the static data are controlled by one RUN_.. clause.
+ * The static data and functions are currently only used in the decode
+ * function, whereas encoding is not yet available.
+ */
+static U16 first;
+static U16 last;
+static U16 num;
+
+
+/*
+ * The W-parameter in the 256 range start from bit 7 of the
+ * information element. The following table indicate the number
+ * of W-parameters and their length in bits. A length of zero
+ * indicated the end of the table.
+ */
+static const T_W_PARAM param_256[10] =
+{
+ /*
+  *  length     count
+  */
+       10,        1,
+        8,        1,
+        7,        2,
+        6,        4,
+        5,        8,
+        4,       16,
+        3,       32,
+        2,       64,
+        1,      128,
+        0,        0
+};
+
+/*
+ * The W-parameter in the 128 range start from bit 7 of the
+ * information element. The following table indicate the number
+ * of W-parameters and their length in bits. A length of zero
+ * indicated the end of the table.
+*/
+
+static const T_W_PARAM param_128[9] =
+{
+ /*
+  *  length     count
+  */
+       10,        1,
+        7,        1,
+        6,        2,
+        5,        4,
+        4,        8,
+        3,       16,
+        2,       32,
+        1,       64,
+        0,        0
+};
+
+/*
+ * Compare results of the first channel with those of the others
+ * to find the dimensions.
+ */
+static void completeAddInfo (U8 *BitmapInStruct)
+{
+  *(U16*) (BitmapInStruct - 2) += num;
+  if (*(U16*) (BitmapInStruct - 6) > first)
+    *(U16*) (BitmapInStruct - 6) = first;
+  if (*(U16*) (BitmapInStruct - 4) < last)
+    *(U16*) (BitmapInStruct - 6) = last;
+}
+
+static void setFirstChanNr (U8 *BitmapInStruct, short w0)
+{
+  U16 bitposition;
+  bitposition = (w0 == 0) ? 0 : (U16)(BITOFFSET_LIST - w0);
+  BitmapInStruct[bitposition >> 3] |= ByteBitMask[bitposition & 7];
+  first = bitposition;
+  last = bitposition;
+  num = 1;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : CCD                    MODULE  : cdc_freq_list_decode    |
++--------------------------------------------------------------------+
+  PURPOSE : The function creates a frequency hopping list from one of
+            the following information elements according GSM 4.08:
+
+            cell channel description
+            frequency list
+            frequency short list
+            neighbour cell description
+
+            The format identifier of the information element is defined as:
+
+            FORMAT-ID, Format Identifier
+
+            Bit Bit Bit Bit Bit    format notation
+             8   7   4   3   2
+
+             0   0   X   X   X     bit map 0
+             1   0   0   X   X     1024 range
+             1   0   1   0   0     512 range
+             1   0   1   0   1     256 range
+             1   0   1   1   0     128 range
+             1   0   1   1   1     variable bit map
+
+            The space this IE takes in the C-structure is depicted in the
+            example below:
+            typedef struct
+            {
+              U16 first;
+              U16 last;
+              U16 num;
+              U8  bitmap[128];
+            } BMP_arfcn_list;
+            
+            The member bitmap stores a list of frequencies in a range of 
+            0 - 1023 (GSM), where some of the frequencies are not yet used.
+*/
+
+SHORT cdc_freq_list_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
+{
+  U8 *FirstByte = globs->bitbuf + globs->bytepos;
+  ULONG  cix_ref, num_prolog_steps, prolog_step_ref;
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "cdc_freq_list_decode()");
+#ifdef CCD_SYMBOLS
+  TRACE_CCD (globs, "decoding list %s with range 1024 format",
+                       ccddata_get_alias((USHORT) e_ref, 1));
+#else
+  TRACE_CCD (globs, "decoding list %d of range 1024 format", melem[e_ref].elemRef);
+#endif
+#endif
+
+  cix_ref = melem[e_ref].calcIdxRef;
+  num_prolog_steps = calcidx[cix_ref].numPrologSteps;
+  prolog_step_ref  = calcidx[cix_ref].prologStepRef;
+
+  /*
+   * if this element have a defined Prolog
+   * we have to process it before decoding the bitstream
+   */
+  if (num_prolog_steps)
+  {
+    ccd_performOperations (num_prolog_steps, prolog_step_ref, globs);
+  }
+  
+  globs->SeekTLVExt = FALSE;
+  globs->pstructOffs = melem[e_ref].structOffs;
+
+  /*
+   * Bitmap 0 format
+   * only for GSM 900 or GSM 850 bands !!!!
+   * std = STD_900, STD_EGSM, STD_DUAL, STD_DUAL_EGSM, STD_850, STD_DUAL_US
+   * No check of std for being PCS 1900 or DCS 1800 is implemented.
+   */
+  if ((*FirstByte & 0x80) == 0)
+  {
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "bitmap 0 format");
+#endif
+    /*
+     * Copy only the first 16 bytes. According to section 10.5.2.1b.2 of 
+     * GSM04.08, 124 bits are dedicated to ARFCN and two bits to the Format-ID.
+     * Two bits are spare.
+     */
+    FirstByte = globs->pstruct + globs->pstructOffs;
+    /* first bit */
+    *(U16 *) FirstByte = 896;//T_LIST_MAX_SIZE - 16;
+    /* last bit */
+    *(U16 *) (FirstByte+2) = T_LIST_MAX_SIZE;
+    /* number of entries */
+    *(U16 *) (FirstByte+4) = 124;
+    memcpy (FirstByte + T_LIST_MAX_SIZE - 10, //FirstByte + 6 + T_LIST_MAX_SIZE - 16,
+            globs->bitbuf + globs->bytepos, 16);
+  }
+  else
+  {
+    U16 ListLength = mvar[melem[e_ref].elemRef].bSize;
+    U8  *BitmapInStruct = globs->pstruct + globs->pstructOffs;
+    first = 0;
+    last = 0;
+    num = 0;
+    /*
+     * RANGE 128,
+     */
+    if ((*FirstByte & 0x8E) == 0x8C)
+    {
+      /*
+       * Use dynamic memory for calculation instead of global memory or stack.
+       */
+      short *w;
+      MALLOC (w, 129 * sizeof (U16));
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "range 128 format");
+#endif
+
+      /*
+       * The algorithm for several ranges is the same with different
+       * tables. The W-parameter start with bit 7. Skip over offset.
+       */
+      bf_incBitpos (7, globs);
+      cdc_decode_param (param_128, w, ListLength, globs);
+
+      /*
+       * W[0] contains the first channel number
+       */
+      setFirstChanNr (BitmapInStruct, w[0]);
+
+      /*
+       * Decode and set the remaining channel number according the
+       * algorithm described in GSM 4.08.
+       */
+      cdc_decode_frequencies (127, &w[1], w[0], FREQUENCY_LIST, globs);
+      completeAddInfo (BitmapInStruct);
+
+      /*
+       * free the dynamic allocated memory.
+       */
+      MFREE (w);
+    }
+    /*
+     * RANGE 256
+     */
+    if ((*FirstByte & 0x8E) == 0x8A)
+    {
+      /*
+       * Use dynamic memory for calculation instead of global memory or stack.
+       */
+      short *w;
+      MALLOC (w, 257 * sizeof (U16));
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "range 256 format");
+#endif
+
+      /*
+       * Decode the W-parameter. The W-parameter start with bit 7.
+       */
+      bf_incBitpos (7, globs);
+      cdc_decode_param (param_256, w, ListLength, globs);
+
+      /*
+       * W[0] contains the first channel number
+       */
+      setFirstChanNr (BitmapInStruct, w[0]);
+
+      /*
+       * decode and set the remaining channel number according the
+       * algorithm described in GSM 4.08.
+       */
+      cdc_decode_frequencies (255, &w[1], w[0], FREQUENCY_LIST, globs);
+      completeAddInfo (BitmapInStruct);
+
+      /*
+       * free the dynamic allocated memory.
+       */
+      MFREE (w);
+    }
+    /*
+     * RANGE 512
+     */
+    if ((*FirstByte & 0x8E) == 0x88)
+    {
+      /*
+       * Use dynamic memory for calculation instead of global memory or stack.
+       */
+      short *w;
+      MALLOC (w, 257 * sizeof (U16));
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "range 512 format");
+#endif
+
+      /*
+       * the algorithm for the several ranges is the same with different
+       * tables. The W-parameter start with bit 7. Skip over offset.
+       */
+      bf_incBitpos (7, globs);
+      cdc_decode_param (param_512, w, ListLength, globs);
+
+      /*
+       * W[0] contains the first channel number
+       */
+      setFirstChanNr (BitmapInStruct, w[0]);
+
+      /*
+       * decode and set the remaining channel number according the
+       * algorithm described in GSM 4.08.
+       */
+      cdc_decode_frequencies (511, &w[1], w[0], FREQUENCY_LIST, globs);
+      completeAddInfo (BitmapInStruct);
+
+      /*
+       * free the dynamic allocated memory.
+       */
+      MFREE (w);
+    }
+
+    if ((*FirstByte & 0x88) == 0x80)
+    {
+      /*
+       * RANGE 1024
+       *
+       * Use dynamic memory for calculation instead of global memory or stack.
+       */
+      U8 f0;
+      U8 offset;
+
+      short *w;
+      MALLOC (w, 257 * sizeof (U16));
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "range 1024 format");
+#endif
+
+      /*
+       * Get the f0 indicator. It indicates whether channel 0 is part
+       * of the frequency hopping list or not.
+       */
+      /* The following lines are equal to:
+       * ccd_decodeByte (FirstByte, (U16)(globs->byteoffs+5), 1, &f0);
+       */
+      offset = globs->byteoffs+5;
+      if (offset < 8)
+      {
+        f0 = FirstByte[0] << offset;
+        f0 &= 0x80;
+      }
+      else
+      {
+        U16 tmpvar;
+        tmpvar = *(U16*) FirstByte;
+        tmpvar <<= offset;
+        f0 = tmpvar & 0x8000;
+      }
+
+      /*
+       * The algorithm for the several ranges is the same with different
+       * tables. The W-parameter start with bit 6. Skip over offset.
+       */
+      bf_incBitpos (6, globs);
+      cdc_decode_param (param_1024, w, ListLength, globs);
+
+      /*
+       * If indicated add channel 0 to the list
+       */
+      if (f0)
+      {
+        /* The following is equal to setFirstChanNr(0); */
+        BitmapInStruct[0] |= 0x80;
+        num = 1;
+      }
+
+      /*
+       * decode and set the remaining channel number according the
+       * algorithm described in GSM 4.08.
+       */
+      cdc_decode_frequencies (1023, &w[0], 0, FREQUENCY_LIST, globs);
+      completeAddInfo (BitmapInStruct);
+
+      /*
+       * free the dynamic allocated memory.
+       */
+      MFREE (w);
+    }
+    /*
+     * RANGE variable
+     */
+    if ((*FirstByte & 0x8E) == 0x8E)
+    {
+      /*
+       * The format is similar to the bitmap 0 format. The
+       * calculation starts from a base channel number svalue
+       * instead of channel number 1.
+       */
+      U32  lvalue;
+      U16 svalue;
+      U32 i;
+      U16 bitposition;
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "range variable format");
+#endif
+
+      /* Get the first channel number. */
+      bf_incBitpos (7, globs);
+      lvalue = bf_getBits (10, globs);
+
+      /* Copy lvalue to svalue to set the correct channel. */
+      svalue = (U16)lvalue;
+      setFirstChanNr (BitmapInStruct, svalue);
+      first = svalue;
+      num = 1;
+      for (i = 1; i < 112; i++)
+      {
+        /*
+         * Get the value of the next bit.
+         * If the bit is set, set channel i+svalue
+         */
+        if (bf_readBit (globs))
+        {
+          U16   channel = (U16)for_modulo(i+svalue, 1024);
+
+          bitposition = (channel == 0) ? 0 : (U16)(BITOFFSET_LIST - channel);
+          BitmapInStruct[bitposition >> 3] |= ByteBitMask[bitposition & 7];
+          last = bitposition;
+          num++;
+        }
+      }
+      completeAddInfo (BitmapInStruct);
+    }
+  }
+
+  return 1;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : CCD                   MODULE  : cdc_freq_list_encode     |
++--------------------------------------------------------------------+
+
+  PURPOSE : Encoding function is not needed, since this message is 
+            sent from net to MS.
+            It could be only useful for testing procedure if there
+            were an encoder function at this place. 
+            This will be a future work.
+*/
+
+SHORT cdc_freq_list_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
+{
+
+#ifdef DEBUG_CCD
+  TRACE_CCD (globs, "cdc_freq_list_encode()");
+#endif
+#ifdef TARGET_WIN32
+  /* TBD */
+#endif
+
+  return 1;
+}
+#endif /* !RUN_INT_RAM */