--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/cs/layer1/tpu_drivers/source/tpudrv.h	Sun Jul 15 04:39:26 2018 +0000
@@ -0,0 +1,247 @@
+/************* Revision Controle System Header *************
+ *                  GSM Layer 1 software 
+ *
+ *        Filename tpudrv.h
+ *  Copyright 2003 (C) Texas Instruments  
+ *
+ ************* Revision Controle System Header *************/
+
+/*
+ * Device addresses - GCS000
+ */ 
+// GSM 1.5 : TPU / TSP addresses 
+//-------------------------------------
+
+#if ((CHIPSET ==2) || (CHIPSET == 3) || (CHIPSET == 4))
+  #define TPU_ADDR      0xFFFE0000l            // Hercule / Ulysse / Samson
+
+  #define TPU_RAM       (TPU_ADDR + 0x1400)
+
+  #define TPU_REG       (TPU_ADDR + 0x1000)
+  #define TSP_REG       (TPU_ADDR + 0x0800)
+  #define TPU_TIM       (TPU_ADDR + 0x2000)
+
+#elif ((CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7)  || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+  #define TPU_ADDR      0xFFFF0000l            // Strobe 1 address
+
+  #define TPU_RAM       0xFFFF9000l            // TPU RAM
+
+  #define TPU_REG       (TPU_ADDR + 0x1000)    // TPU register
+  #define TSP_REG       0xFFFE0800l            // TSP register
+  #define TPU_TIM       0xFFFE2000l            // ULPD register
+
+#endif
+
+
+/*
+ * Macros for defining TPU instructions
+ */ 
+#define TPU_SLEEP             0
+#define TPU_MOVE(addr,data)   (0x8000 | ((data)<<5) | (addr))
+#define TPU_AT(time)          (0x2000 | (((time + 5000) % 5000)))
+#define TPU_FAT(time)         (0x2000 | (time))  // Fast version without modulo
+#define TPU_SYNC(time)        (0x6000 | (time))
+#define TPU_WAIT(time)        (0xA000 | (time))
+#define TPU_OFFSET(time)      (0x4000 | (time))
+#define MOD5000(a)            (((a) + 5000) % 5000)
+
+
+/*
+ * TSP registers - defined in GCS004 - Time Serial Port
+ */ 
+/*
+ *  in TPU address space
+ */
+// GSM 1.5 : TSP_TX_REG_1/2/3/4 instead of TSP_TX_U/M/L
+//           added TSP_SPI_SET1/2/3 to ctrl up to 5 periph. 
+//-----------------------------------------------------
+  #define TSP_CTRL1       0x00
+  #define TSP_CTRL2       0x01
+  #define TSP_TX_REG_1    0x04
+  #define TSP_TX_REG_2    0x03
+  #define TSP_TX_REG_3    0x02
+  #define TSP_TX_REG_4    0x05
+  #define TSP_ACT         0x06
+  #define TSP_ACTX        0x07
+  #define TSP_GAUGING_EN  0x11
+  #define TSP_SPI_SET1    0x09
+  #define TSP_SPI_SET2    0x0A 
+  #define TSP_SPI_SET3    0x0B
+  #define TPU_IT_DSP_PG   0x10
+  #define TSP_GAUGING_EN  0x11
+
+/*
+ *  in ARM address space - defined in HYP004
+ */
+  #define TSP_RX_LSB   (TSP_REG + 0x00)
+
+  #define TSP_RX_MSB   (TSP_REG + 0x02)
+
+  #define TSP_TX_LSB   (TSP_REG + 0x0c)
+
+  #define TSP_TX_MSB   (TSP_REG + 0x0a)
+
+
+/*
+ * TSP registers bit definitions
+ */ 
+  #define TC1_DEVICE0   0x00
+  #define TC1_DEVICE1   0x20
+  #define TC1_DEVICE2   0x40
+  #define TC1_DEVICE3   0x60
+  #define TC1_DEVICE4   0x80
+  #define TC2_RD        0x01
+  #define TC2_WR        0x02
+  #define TC2_EDGE_TRIG 0x40
+  #define TC2_RISING    0x80
+  #define TSP_CLK_RISE  0x01
+  #define TSP_ENA_POS   0x02
+  #define TSP_ENA_EDGE  0x04
+  #define GAUGING_START 0x01
+  #define GAUGING_STOP  0x00
+  #define TSP_ENA_POS_MSB 0x20
+
+
+
+/*
+ * TPU registers - defined in HYP002
+ */ 
+// GSM 1.5 : TPU reg are 16-bit access
+//---------------------------------------
+#define TPU_CTRL          (TPU_REG + 0x00)
+#define TPU_INT_CTRL      (TPU_REG + 0x02)
+#define TPU_INT_STAT      (TPU_REG + 0x04)
+#define TPU_OFFSET_REG    (TPU_REG + 0x0C)
+#define TPU_SYNCHRO_REG   (TPU_REG + 0x0E)
+#define TPU_DSP_PG        (TPU_REG + 0x20)
+
+
+
+ 
+
+/*
+ * TPU control register bits
+ */ 
+// GSM 1.5 : TPU bits changed
+//---------------------------------------
+#define TPU_CTRL_RESET     0x0001 
+#define TSP_CTRL_RESET     0x0080
+#define TPU_CTRL_T_PAGE    0x0002
+#define TPU_CTRL_T_ENBL    0x0004
+#define TPU_CTRL_D_ENBL    0x0010       // WARNING THIS BIT DOES NOT EXIST IN HYPERION
+#define TPU_CTRL_SPI_RST   0x0080
+#define TPU_CTRL_WAIT      0x0200
+#define TPU_CTRL_CLK_EN    0x0400
+#if (CHIPSET == 7)  || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)
+  #define TPU_CTRL_FULL_WRITE 0x0800
+#endif
+
+
+
+
+/* 
+ * TPU interrupt control register bits
+ */
+
+
+/* WARNING BUG IN HYPERION. */
+/* READING TPU_INT_CRTL, TPU_INT_ITP_M BIT CONTENTS AFFECTS THE TPU_INT_ITD_M VALUE. */ 
+
+#define TPU_INT_ITF_M      0x0001
+#define TPU_INT_ITP_M      0x0002         
+#define TPU_INT_ITD_M      0x0004
+#define TPU_INT_ITD_F      0x0008        // WARNING THIS BIT DOES NOT EXIST IN HYPERION
+
+#define INT_FRAME   4       /* TPU frame interrupt */   
+#define INT_PAGE    5       /* TPU page interrupt */        
+#define INT_TSP 3       /* TSP interrupt */ 
+
+
+
+#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
+    // BB signals connected to serial link1
+    #define BULON    0x80     // bit6
+    #define BULCAL   0x40     // bit5
+    #define BULENA   0x20     // bit4
+    #define BDLON    0x10     // bit3
+    #define BDLCAL   0x08     // bit2
+    #define BDLENA   0x04     // bit1
+    #define STARTADC 0x02     // bit0
+#endif
+
+
+/* 
+ * GSM RF programming times in quarter bits
+ */
+/**************************************************************************/
+/**************************************************************************/
+/****************************** W A R N I N G !!! *************************/
+/******* This values are fine tuned for LAYER 1 . DO NOT MODIFY !!! *******/
+/****** FOR ANY MODIFICATION , PLEASE CONTACT Texas Instruments Inc. ******/
+/**************************************************************************/
+/**************************************************************************/
+
+
+/**************************************/
+/* TPU Macros: prototypes functions   */
+/**************************************/
+// TPU macros.
+//------------
+void l1dmacro_reset_hw        (UWORD32 servingCellOffset);
+void l1dmacro_init_hw         (void);
+void l1dmacro_init_hw_light   (void);
+void l1dmacro_idle            (void);                       
+void l1dmacro_rx_synth        (SYS_UWORD16  radio_freq);
+void l1dmacro_tx_synth        (SYS_UWORD16  radio_freq);
+void l1dmacro_agc             (SYS_UWORD16  radio_freq, WORD8 gain, UWORD8 lna);
+void l1dmacro_afc             (SYS_UWORD16 afc_value, UWORD8 win_id);
+void l1dmacro_rx_ms           (SYS_UWORD16 radio_freq);
+void l1dmacro_rx_fb           (SYS_UWORD16 radio_freq);
+void l1dmacro_rx_fb26         (SYS_UWORD16 radio_freq);
+void l1dmacro_offset          (UWORD32     offset_value, 
+                               WORD32      relative_time);
+void l1dmacro_synchro         (UWORD32 when, UWORD32 value);
+void l1dmacro_rx_sb           (SYS_UWORD16 radio_freq);
+void l1dmacro_rx_nb           (SYS_UWORD16 radio_freq);
+void l1dmacro_tx_nb           (SYS_UWORD16 radio_freq, UWORD8 txpwr, UWORD8 adc_active);
+void l1dmacro_tx_ra           (SYS_UWORD16 radio_freq, UWORD8 txpwr, UWORD8 adc_active);
+void l1dmacro_adc_read_tx     (UWORD32 when);
+void l1dmacro_adc_read_rx     (void);
+void l1dmacro_set_frame_it    (void);
+
+void l1pdmacro_it_dsp_gen(WORD16 time);
+
+#if TESTMODE
+  void l1dmacro_rx_cont (SYS_UWORD16 radio_freq, UWORD8 txpwr);
+  void l1dmacro_tx_cont (SYS_UWORD16 radio_freq, UWORD8 txpwr);
+  void l1dmacro_stop_cont (void);
+#endif
+
+/*
+ * TPU prototypes
+ */ 
+void TP_PageIntHandler  (void);
+void TP_FrameIntHandler (void);
+void TP_PageIntHandler  (void);
+void TP_FrameIntHandler (void);
+void TPU_Reset(SYS_UWORD16 on);
+void TSP_Reset(SYS_UWORD16 on);
+void TPU_ClkEnable(SYS_UWORD16 on);
+void TP_Reset(SYS_UWORD16 on);
+void TP_Enable(SYS_UWORD16 on);
+BOOL TPU_check_IT_DSP(void);
+
+
+/*
+ * TPUDRV global variables
+ */ 
+#ifdef TPUDRV_C
+#define TP_GLOBAL 
+#else
+#define TP_GLOBAL extern
+#endif
+
+TP_GLOBAL volatile UWORD32 TP_PageInt;
+TP_GLOBAL volatile UWORD32 TP_FrameInt;
+
+