--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-aci/aci/ati_bas.c	Sun Jul 15 04:40:46 2018 +0000
@@ -0,0 +1,3392 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-F&D (8411)
+|  Modul   :  ATI
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  AT Command Interpreter: basic functions.
++-----------------------------------------------------------------------------
+*/
+
+#ifndef ATI_BAS_C
+#define ATI_BAS_C
+
+#include "aci_all.h"
+
+#include <ctype.h>
+#include <string.h>
+
+#include "aci_cmh.h"
+#include "ati_cmd.h"
+#include "aci_cmd.h"
+#include "aci_io.h"
+#include "aci_cmd.h"
+#include "l4_tim.h"
+#include "line_edit.h"
+#include "aci_lst.h"
+
+#include "pcm.h"
+#include "audio.h"
+#include "aci.h"
+#include "rx.h"
+#include "pwr.h"
+#include "l4_tim.h"
+
+
+#ifdef GPRS
+#ifdef DTI
+#include "dti.h"
+#include "dti_conn_mng.h"
+#include "dti_cntrl_mng.h"
+#endif /* DTI */
+#include "gaci.h"
+#include "gaci_cmh.h"
+#include "gaci_cmd.h"
+#endif  /* GPRS */
+
+#include "aci_mem.h"
+#include "aci_prs.h"
+
+#include "ati_int.h"
+
+#ifndef _SIMULATION_
+#include "ffs\ffs.h"
+#endif
+
+#ifdef FF_ATI_BAT
+
+#include "typedefs.h"
+#include "gdd.h"
+#include "bat.h"
+
+#include "ati_bat.h"
+
+#endif /*FF_ATI_BAT*/
+
+#include "cl_imei.h"
+#include "ksd.h"
+#include "cmh_ss.h"
+
+#include "fc-target.cfg"
+#include "rv/rv_defined_swe.h"     // for RVM_FCHG_SWE
+#include "fchg/fchg_api.h"
+
+LOCAL T_ATI_RSLT aciPrcsPlusCG (UBYTE srcId, CHAR* cl, CHAR* ef);
+LOCAL T_ATI_RSLT setaciPrcsVolLevel ( CHAR* cl, UBYTE device );
+LOCAL T_ATI_RSLT tesaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device );
+LOCAL T_ATI_RSLT queaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device );
+
+EXTERN T_ATI_RSLT setatPlusCLIP (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCOLP (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPercentCREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCGREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPercentCGREG (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT setatPlusCCLK (char *cl, UBYTE srcId);
+EXTERN T_ATI_RSLT queatPlusCCLK (char *cl, UBYTE srcId);
+
+/* for atAndF */
+EXTERN void ati_cmd_reset(UBYTE srcId);
+
+
+GLOBAL const  T_ACI_AT_CMD atw_cmd_list [] = {AT_CMD_CGREG, AT_CMD_CLIP, AT_CMD_CLIR,
+                                                AT_CMD_COLP, AT_CMD_CREG, AT_CMD_ALS, AT_CMD_CGAATT,
+                                                AT_CMD_P_CGREG, AT_CMD_CPI, AT_CMD_P_CREG, AT_CMD_NONE};
+
+
+#define MAX_IDX_LTH (10)
+
+#define MAX_ATW_STORED_PROFILE 2 /*profile number for AT&W*/
+#define MAX_ATW_CMD_NAM_LEN 15     /*Max command name length in bytes, e.g. %CGAATT;*/
+#define MAX_ONE_ATW_PRO_LEN 50      /*Max profile length of 1 command  in bytes,so far %CGAATT has the longest */
+  /* profile length \CmdId\Total Len\token\1st Para length\1st para\token\2nd para length\2nd para\'\0'\ */
+#define STRING 1                        /*Token: string*/
+#define SIGNED_VALUE 2             /*Token: signed value*/
+#define UNSIGNED_VALUE 3         /*Token: unsigned value*/
+#define MAX_ATW_CHOSEN_CMD_NB  (sizeof(atw_cmd_list)/sizeof(T_ACI_AT_CMD) -1)
+/*Max number of AT commands can be chosen by user, -1 because the last entry is only an ending symbol*/
+
+
+/* for profile handling ATZ and AT&W */
+#ifdef _SIMULATION_
+LOCAL CHAR  atw_cmd_list_simu [(MAX_ATW_CMD_NAM_LEN) *( MAX_ATW_CHOSEN_CMD_NB) + 1] = {'\0'};
+LOCAL UBYTE atw_profile_simu [MAX_ATW_STORED_PROFILE][(MAX_ATW_CHOSEN_CMD_NB) * (MAX_ONE_ATW_PRO_LEN)+1]={{'\0'},{'\0'}};
+ /* simulates the profile arrays  for windows test*/
+#endif
+static UBYTE ATZprofile;
+
+GLOBAL const DBG_Memory dbg_mem_names[] =
+{
+  {"PRI",  P_DBGINFO_PrimPoolPartition},
+  {"MEM",  P_DBGINFO_DmemPoolPartition},
+  {"DAT",  P_DBGINFO_DataPoolPartition},
+  { 0,     P_DBGINFO_NotPresent       }
+};
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atBW               |
++--------------------------------------------------------------------+
+
+  PURPOSE : B command (only implemented to maintain compability)
+            W command (only implemented to maintain compability)
+*/
+
+GLOBAL T_ATI_RSLT atBW(char *cl, UBYTE srcId)
+{
+  SHORT i=0;
+  TRACE_FUNCTION("atB()");
+
+  while (*cl >= '0' AND *cl <= '9')
+  {
+    cl++;
+    i++;
+    if (i > 1)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+  }
+  return ATI_CMPL;
+}
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atE                |
++--------------------------------------------------------------------+
+
+  PURPOSE : E command (command echo setting)
+      F command (data echo setting)
+      L command (Speaker Volume)
+      M command (Speaker Mode)
+      Q command (result code supression)
+      V command (verbose response setting)
+      X command (Busy/Dial tone indication)
+*/
+
+GLOBAL T_ATI_RSLT atEFLMQVX(char *cl, UBYTE srcId)
+{
+  char  *end   = NULL;
+  UBYTE value  = 0;
+  CHAR  letter = *(cl - 1);
+  T_LEDIT line = {0xFF, 0xFF,  0xFF, 0xFF, 0xFF}; /* init with values which say: do not change */
+               /* S3      S4     S5   atE  smsEnd */
+  TRACE_FUNCTION("atEFLMQVX()");
+
+  TRACE_EVENT_P1 ("letter = %02X", letter);
+
+  value = (UBYTE)strtol(cl, &end, 10);
+  if(*end )
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+  switch(letter)
+  {
+  case('E'):
+    if (value > 1)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+    ati_user_output_cfg[srcId].atE = value;
+    /*
+     * line edit need this piece of information, as well
+     */
+    line.atE = ati_user_output_cfg[srcId].atE;
+    ledit_set_config (srcId, line);
+    return ATI_CMPL; /* return to prevent non used p at the end of this function */
+  case('F'):
+    break;
+  case('L'):
+    if (value > 3)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+    at.s1415.atL = value;
+    break;
+  case('M'):
+    if (value > 2)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+    at.s1415.atM = value;
+    break;
+  case('Q'):
+    if (value > 1)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+    ati_user_output_cfg[srcId].atQ = value;
+    break;
+  case('V'):
+    if (value > 1)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+    at.s1415.atV = value;
+    break;
+  case('X'):
+    if (value > 4)
+    {
+      cmdAtError(atError);
+      return ATI_FAIL;
+    }
+    ati_user_output_cfg[srcId].atX = value;
+    break;
+  default:
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PRIJECT : GSM-F&D (8411)              MIDULE  : ACI_CMD            |
+| STATE   : code                        RIUTINE : atI                |
++--------------------------------------------------------------------+
+
+  PURPOSE : I command (identification)
+*/
+
+GLOBAL T_ATI_RSLT atI(char *cl, UBYTE srcId)
+{
+  CHAR*             ef          = EF_INF0_ID;
+  pcm_FileInfo_Type fileInfo;
+  USHORT            value;
+  USHORT            maxRecords;
+  USHORT            i;
+
+  TRACE_FUNCTION("atI()");
+
+  parse (cl, "r", &value);
+  if (!cl)
+  {
+    value = 0;
+  }
+
+  /* 
+   * The switch case here is intended for values which are reserved for 
+   * the protocol stack manufacturer and cannot be overridden by values 
+   * in the PCM/FFS.
+   */
+  switch (value)
+  {
+    case 99:
+      io_sendMessage(srcId, "Texas Instruments", ATI_NORMAL_OUTPUT);
+      return ATI_CMPL;
+
+    default:
+      break;
+  }
+
+  if (pcm_GetFileInfo ((UBYTE*)ef, &fileInfo) NEQ DRV_OK)
+  {
+    cmdCmeError (CME_ERR_MemFail);
+    return ATI_FAIL;
+  }
+
+  if (pcm_ReadRecord ((UBYTE*)ef, (USHORT)(value + 1), fileInfo.FileSize,
+                      (UBYTE*)g_sa, &fileInfo.Version, &maxRecords) NEQ DRV_OK)
+  {
+    cmdCmeError (CME_ERR_MemFail);
+    return ATI_FAIL;
+  }
+
+  i = 0;
+  while ((UBYTE)g_sa[i] NEQ 0xFF)
+  {
+    i++;
+  }
+  g_sa[i] = '\0';
+  io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT );
+
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atTP               |
++--------------------------------------------------------------------+
+
+  PURPOSE : TP command (select tone/pulse dialing < only implemented to
+                        maintain compability>)
+*/
+
+GLOBAL T_ATI_RSLT atTP(char *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("atTP()");
+
+  if (*cl >= '0' AND *cl <= '9')
+  {
+     cmdAtError(atError);
+     return ATI_FAIL;
+  }
+  else
+  {
+    return ATI_CMPL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atS                |
++--------------------------------------------------------------------+
+
+  PURPOSE : S command (S register setting)
+*/
+
+GLOBAL T_ATI_RSLT atS(char *cl, UBYTE srcId)
+{
+  SHORT reg_num,reg_cont,i=0;
+  char cont[4];
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+  T_LEDIT line = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; /* init with values, which say: do not change */
+  T_ATI_RSLT retcd  = ATI_CMPL;
+
+  TRACE_FUNCTION("atS()");
+
+  reg_num=0;
+  while (isdigit (*cl))
+  {
+    reg_num *= 10;
+    reg_num += *cl-'0';
+    ++cl;
+  }
+
+  switch (*cl)
+  {
+    case('?'):
+    {
+      cl++;
+      switch (reg_num)
+      {
+        case 0:                               /* supported registers for read access are listed here */
+        case 1:
+        case 2:
+        case 3:
+        case 4:
+        case 5:
+        case 6:
+        case 7:
+        case 8:
+        case 10: reg_cont = at.S[reg_num]; break;  /* index access register */
+        case 30: reg_cont = at.S30; break;         /* direct access register */
+#ifdef GPRS
+        case 99: reg_cont = at.S99; break;
+#endif /* GPRS */
+
+        default:
+          cmdAtError(atError);
+          return ATI_FAIL;
+      }
+
+      sprintf(g_sa,"%03d", reg_cont);
+
+      io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+      return ATI_CMPL;
+    }
+
+    case('='):
+    {
+      cl++;
+      if(*cl EQ '?')
+      {
+        cl++;
+
+        switch(reg_num)
+        {
+          case(0):  sprintf(g_sa,"S%d:%s",reg_num,"(0-255)"); break;
+        /*case(1):*/ /* S1 register is read only !!! */
+          case(2):
+          case(3):
+          case(4):
+          case(5):  sprintf(g_sa,"S%d:%s",reg_num,"(0-127)"); break;
+          case(6):  sprintf(g_sa,"S%d:%s",reg_num,"(2-10)");  break;
+          case(7):  sprintf(g_sa,"S%d:%s",reg_num,"(1-255)"); break;
+          case(8):  sprintf(g_sa,"S%d:%s",reg_num,"(0-255)"); break;
+          case(10):
+          case(30): sprintf(g_sa,"S%d:%s",reg_num,"(1-254)"); break;
+#ifdef GPRS
+          case(31): sprintf(g_sa,"S%d:%s",reg_num,"(0-255)"); break;
+#endif /* GPRS */
+
+          default:
+            cmdAtError(atError);
+            return ATI_FAIL;
+        }
+        io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+        return ATI_CMPL;
+      }
+      else
+      {
+        while (*cl >= '0' AND *cl <= '9' AND i < 3)
+        {
+          cont[i] = (*cl);
+          i++;
+          cl++;
+        }
+        if (!i)
+        {
+          cmdAtError(atError);
+          return ATI_FAIL;
+        }
+        cont[i]='\0';
+        reg_cont=atoi(cont);
+        switch(reg_num)
+        {
+          case(0):
+            if (reg_cont<0 OR reg_cont > 255)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            at.rngPrms.srcID_S0 = srcId;
+
+#if defined (GPRS) AND defined (DTI)
+           
+            /*
+             *  Special case of implict attach to GACI when S0 is set to
+             *  Non-zero value. GSM 7.07 version 6.4.0  10.2.2.1
+             */
+            if ( reg_cont > 0 )
+            {
+              T_CGCLASS_CLASS m_class;
+              T_ACI_RETURN ret;
+
+              if (AT_CMPL NEQ qAT_PlusCGCLASS((T_ACI_CMD_SRC)srcId, &m_class))
+              {
+                cmdAtError(atError);
+                return ATI_FAIL;
+              }
+              /*
+               *  no GPRS attach requested if only GSM mobile
+               */
+              if ( CGCLASS_CLASS_CC NEQ m_class)
+              {
+                ret = sAT_PlusCGATT ( (T_ACI_CMD_SRC)srcId, CGATT_STATE_ATTACHED );
+                switch (ret)
+                {
+                case (AT_CMPL):                         /*operation completed*/
+                  break;
+                case (AT_EXCT):
+                  src_params->curAtCmd    = AT_CMD_CGATT;
+                  retcd = ATI_EXCT;
+                  break;
+                default:
+                  cmdAtError(atError);                  /*Command failed*/
+                  return ATI_FAIL;
+                }
+              }
+            }
+#endif  /* GPRS */
+            break;
+          case(2):
+            if (reg_cont<0 OR reg_cont > 127)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+          case(3):
+            if (reg_cont<0 OR reg_cont > 127)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            line.S3  = (UBYTE)reg_cont;
+            break;
+          case(4):
+            if (reg_cont<0 OR reg_cont > 127)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            line.S4  = (UBYTE)reg_cont;
+            break;
+          case(5):
+            if (reg_cont<0 OR reg_cont > 127)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            line.S5  = (UBYTE)reg_cont;
+            break;
+          case(6):
+            if (reg_cont<2 OR reg_cont > 10)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+          case(7):
+            if (reg_cont<1 OR reg_cont > 255)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+          case(8):
+            if (reg_cont<0 OR reg_cont > 255)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+          case(10):
+            if (reg_cont<1 OR reg_cont > 254)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+          case(30):
+            if (reg_cont<0 OR reg_cont > 254)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+#if defined (GPRS) AND defined (DTI)
+          case(99):
+
+			  if (reg_cont<0 OR reg_cont > 255)
+            {
+              cmdAtError(atError);
+              return ATI_FAIL;
+            }
+            break;
+#endif /* GPRS */
+
+          default:
+            cmdAtError(atError);
+            return ATI_FAIL;
+        }
+
+        switch (reg_num)
+        {
+
+          case 0:                                       /* supported registers for write access are listed here */
+        /*case 1: Read Only */
+          case 2:
+          case 3:
+          case 4:
+          case 5:
+          case 6:
+          case 7:
+          case 8:
+          case 10: at.S[reg_num]=(UBYTE)reg_cont; break;
+
+          case 30: at.S30       =(UBYTE)reg_cont; break;
+#if defined (GPRS) AND defined (DTI)
+          case 99: at.S99       =(UBYTE)reg_cont; break;
+#endif
+
+          default:
+            cmdAtError(atError);
+            return ATI_FAIL;
+        }
+
+
+        /*
+         * line edit need this piece of information, as well
+         */
+        ledit_set_config (srcId, line);
+        break;
+      }
+    }
+    default:
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+  return retcd;
+}
+
+
+
+/*
+  PURPOSE : this function stores the pre-chosen command list in FFS, but only for windows test.
+*/
+#ifdef _SIMULATION_
+LOCAL T_ATI_RSLT store_command_list (void)
+{
+    char atw_cmd_list []= "+CGREG;+CLIP;+CLIR;+COLP;+CREG;%ALS;%CGAATT;%CGREG;%CPI;%CREG;";
+    TRACE_FUNCTION ("store_command_list()");
+
+   if ( !(strcpy (atw_cmd_list_simu, atw_cmd_list)))
+   {
+       cmdCmeError(CME_ERR_Unknown);
+       return ( ATI_FAIL);
+   }
+   return (ATI_CMPL);
+}
+#endif /*_SIMULATION_*/
+
+
+/*
+  This function gets the command Id from input command name string if it is within the default listcmdList
+*/
+LOCAL T_ACI_AT_CMD get_command_id_in_wn_list(CHAR *command_str)
+{
+    int i;
+    T_ACI_AT_CMD command =  AT_CMD_NONE;
+    TRACE_FUNCTION ("get_command_id_in_wn_list()");
+
+    command = get_command_id(command_str);
+    for (i = 0;*(atw_cmd_list+i) NEQ AT_CMD_NONE; i ++)
+    {
+       if (command EQ *(atw_cmd_list+i) )
+       {
+          return (command);
+       }
+    }
+    TRACE_EVENT_P1("AT&W: unrecognized command in the list: %s", command_str);
+    return (AT_CMD_NONE);
+}
+
+/*
+  PURPOSE : this function reads the pre-chosen command list in FFS and then builds a string
+                   of all the command Ids according to the command list read.
+
+  Parameter:
+                  cmd_id_read:  To hold the list of command Ids
+*/
+
+LOCAL T_ATI_RSLT read_command_list_from_ffs (UBYTE *cmd_id_read)
+{
+   int i, k;
+#ifndef _SIMULATION_
+   int val;
+#endif /*_SIMULATION_*/
+   int j = 0;
+   CHAR *cmdList_temp;/*to hold the command name strings read from FFS*/
+   CHAR string_temp [MAX_ATW_CMD_NAM_LEN] = {'\0'};/* hold 1 command name string*/
+   T_ACI_AT_CMD command =  AT_CMD_NONE;
+
+   TRACE_FUNCTION ("read_command_list_from_ffs()");
+   ACI_MALLOC (cmdList_temp, (MAX_ATW_CHOSEN_CMD_NB) *( MAX_ATW_CMD_NAM_LEN) + 1) ;
+
+#ifndef _SIMULATION_
+   if ((val = ffs_fread ("/gsm/com/cmdList", cmdList_temp,
+                                 (MAX_ATW_CHOSEN_CMD_NB) *( MAX_ATW_CMD_NAM_LEN) + 1) )< 1)
+   {
+       TRACE_EVENT_P1("AT&W: Read command list from ffs fail. Returned val is %d", val);
+#else /*!_SIMULATION_*/
+   if (!(strcpy (cmdList_temp, atw_cmd_list_simu)))
+   {
+      TRACE_EVENT("AT&W: Read command list fail. ");
+#endif /*!_SIMULATION_*/
+       ACI_MFREE (cmdList_temp);
+       cmdCmeError(CME_ERR_Unknown);
+       return (ATI_FAIL);
+   }
+
+    /*The for loop builds the command string and then gets the corresponding command Id*/
+    for (i = 0, k = 0; *(cmdList_temp+i) NEQ '\0' AND k < (int)(MAX_ATW_CHOSEN_CMD_NB); i ++)
+   {
+      if (*(cmdList_temp+i) NEQ ';' )
+      {
+         /* No ";" is met*/
+         *(string_temp+j++) = *(cmdList_temp+i);
+      }
+      else
+      {
+         *(string_temp+j) = '\0';
+         command = get_command_id_in_wn_list (string_temp);
+         if  (command NEQ AT_CMD_NONE)  /* ignore it if unknown string met*/
+         {
+             *(cmd_id_read+k++) = (UBYTE)command;
+         }
+        j = 0;
+        *string_temp = '\0';
+      }
+   }
+   *(cmd_id_read+k) = (UBYTE)AT_CMD_NONE;
+   ACI_MFREE (cmdList_temp);
+   return (ATI_CMPL);
+ }
+
+/*
+  PURPOSE : this function builds and stores the profile in FFS according to the command list read.
+*/
+LOCAL T_ATI_RSLT store_profile_to_ffs (T_ACI_CMD_SRC srcId, SHORT nProfile)
+{
+    int i;
+#ifndef _SIMULATION_
+    int val;
+#endif /*_SIMULATION_*/
+    int index = 1;
+    int command_length = 0;
+    /*to hold the content of parameters*/
+#if defined (GPRS) AND defined (DTI)
+    T_CGAATT_ATTACH_MODE  para1;
+    T_CGAATT_DETACH_MODE  para2;
+#endif  /*GPRS*/
+    T_ACI_ALS_MOD   para3 = ALS_MOD_NOTPRESENT;
+    T_ACI_CLIR_MOD  mode = CLIR_MOD_NotPresent;
+    UBYTE *profile = NULL; /*to hold the content of profile, memory will be allocated later*/
+    UBYTE cmdIds [MAX_ATW_CHOSEN_CMD_NB +1] = {'\0'};   /*to hold the list of  command Ids*/
+    char ffsAddr[] = "/gsm/com/profilex"; /*address in ffs, the x depends on which profile to save*/
+
+    TRACE_FUNCTION ("store_profile_to_ffs()");
+
+    ffsAddr[ strlen (ffsAddr) - 1] = '0' + nProfile;
+
+    /*before storing of profile read command list from FFS, cmdIds is used to hold the Ids of commands*/
+    if ( read_command_list_from_ffs (cmdIds) NEQ ATI_CMPL)
+    {
+       cmdCmeError(CME_ERR_Unknown);
+       return (ATI_FAIL);
+    }
+
+  /*command list is successfully read and now ready to build profile, allocate memory first*/
+    ACI_MALLOC (profile, (MAX_ATW_CHOSEN_CMD_NB) * (MAX_ONE_ATW_PRO_LEN) + 1);
+
+ /*this for_loop builds the profile*/
+    for (i = 0; *(cmdIds+i) NEQ AT_CMD_NONE; i ++)
+    {
+       command_length = 5;
+       TRACE_EVENT_P1 ("cmd id is: %d", *(cmdIds+i));
+       *(profile+index++) = *(cmdIds+i);          /*stores command ID as the first element for each command*/
+
+       switch (*(cmdIds+i))
+       {
+#if defined (GPRS) AND defined (DTI)
+          case AT_CMD_CGREG:
+            *(profile+index++) = command_length;/*total length in bytes for this command*/
+            *(profile+index++) = SIGNED_VALUE;  /*token indicates the following parameter is signed*/
+            *(profile+index++) = sizeof (UBYTE);    /*length of the following parameter*/
+            *(profile+index++) = (UBYTE)(ati_gprs_user_output_cfg[srcId].plus_cgreg.mod_lac_cid.pres_mode);
+            break;
+          case AT_CMD_P_CGREG:
+            *(profile+index++) = command_length;
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = (UBYTE)(ati_gprs_user_output_cfg[srcId].percent_cgreg.mod_lac_cid.pres_mode);
+            break;
+          case AT_CMD_CGAATT:
+            qAT_PercentCGAATT(srcId, &para1, &para2);
+            command_length = 8;
+            *(profile+index++) = command_length;
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = (UBYTE)para1;     /*first param*/
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = (UBYTE)para2;   /*second param*/
+            break;
+#endif /*GPRS*/
+          case AT_CMD_CLIP:
+            *(profile+index++) = command_length;
+            *(profile+index++) = UNSIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = ati_user_output_cfg[srcId].CLIP_stat;
+            break;
+          case AT_CMD_CPI:
+            *(profile+index++) = command_length;
+            *(profile+index++) = UNSIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = ati_user_output_cfg[srcId].CPI_stat;
+            break;
+          case AT_CMD_COLP:
+            *(profile+index++) = command_length;
+            *(profile+index++) = UNSIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = at.flags.COLP_stat;
+            break;
+
+          case AT_CMD_CLIR:
+            qAT_PercentCLIR  (srcId, &mode);
+            *(profile+index++) = command_length;
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = mode;
+            break;
+          case AT_CMD_ALS:
+            qAT_PercentALS (srcId, &para3);
+            *(profile+index++) = command_length;
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = (UBYTE)para3;
+            break;
+          case AT_CMD_CREG:
+            *(profile+index++) = command_length;
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = (UBYTE)ati_user_output_cfg[srcId].creg.mod_lac_cid.pres_mode;
+            break;
+          case AT_CMD_P_CREG:
+            *(profile+index++) = command_length;
+            *(profile+index++) = SIGNED_VALUE;
+            *(profile+index++) = sizeof (UBYTE);
+            *(profile+index++) = (UBYTE)(ati_user_output_cfg[srcId].percent_creg.mod_lac_cid.pres_mode);
+            break;
+
+         default:
+            TRACE_EVENT("Unknown AT command");
+            ACI_MFREE (profile);
+            cmdCmeError(CME_ERR_Unknown);
+            return (ATI_FAIL);
+      }
+    }
+
+   /*store the total length of the string in the first element, the max length of the profile should
+       not exceed 255, otherwise the stored structure in FFS should be redefined. Param <index>
+       is actually the length of the profile.
+   */
+   if (index > 255)
+   {
+       ACI_MFREE (profile);
+       TRACE_EVENT("Profile size exceed 255.");
+       cmdCmeError(CME_ERR_Unknown);
+       return (ATI_FAIL);
+   }
+   profile [0] = (UBYTE)index;
+
+#ifndef _SIMULATION_
+   if((val = ffs_fwrite(ffsAddr, profile, index ) )NEQ EFFS_OK)
+   {
+       TRACE_EVENT_P1("Write to FFS fail. Returned value is %d", val);
+       ACI_MFREE (profile);
+       cmdCmeError(CME_ERR_Unknown);
+       return (ATI_FAIL);
+   }
+ #endif  /*!_SIMULATION_*/
+
+#ifdef _SIMULATION_
+   for (i = 0;  i < index; i++)
+   {
+     atw_profile_simu[nProfile][i] = profile [i];
+     TRACE_EVENT_P2 ("index is %d, store profile is: %d", i, atw_profile_simu[nProfile][i]);
+   }
+#endif  /*_SIMULATION_*/
+   ACI_MFREE (profile);
+   return (ATI_CMPL);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT :                             MODULE  :                    |
+| STATE   : code                        ROUTINE : ati_wn_store_params|
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is the implementation of of AT command AT&W
+            which stores the profile of some prechosen commands to FFS.
+*/
+
+LOCAL T_ATI_RSLT ati_wn_store_params      ( UBYTE  srcId,   SHORT  nProfile)
+
+{
+   TRACE_FUNCTION ("ati_wn_store_params()");
+
+/*Stores pre-chosen AT commands. For windows test purpose only.*/
+#ifdef _SIMULATION_
+   if (store_command_list () NEQ ATI_CMPL)
+   {
+      cmdCmeError(CME_ERR_Unknown);
+      return (ATI_FAIL) ;
+   }
+#endif /*_SIMULATION_*/
+
+/*Stores profile for chosen AT commands to FFS*/
+   if (store_profile_to_ffs ((T_ACI_CMD_SRC)srcId, nProfile) NEQ ATI_CMPL)
+   {
+      cmdCmeError(CME_ERR_Unknown);
+      return (ATI_FAIL) ;
+   }
+   return (ATI_CMPL);
+}
+
+
+
+/*
+  PURPOSE : this function reads the profile stored in FFS.
+*/
+
+LOCAL T_ATI_RSLT read_profile_from_ffs (SHORT nProfile, UBYTE *profile_read, SHORT len_profile_read)
+{
+#ifndef _SIMULATION_
+   int val;
+#else
+   int i;
+#endif
+   /*the last letter x depends on the profile to read*/
+   char ffsAddr[] = "/gsm/com/profilex";
+
+   TRACE_FUNCTION ("read_profile_from_ffs()");
+   /*build the correct address in FFS according to nProfile*/
+   ffsAddr[ strlen (ffsAddr) - 1] = '0' + nProfile;
+   TRACE_EVENT_P1 ("Read address is: %s", ffsAddr);
+
+#ifndef _SIMULATION_
+   if ((val = ffs_fread (ffsAddr, profile_read, len_profile_read ))< 1)
+   {
+       TRACE_EVENT_P1("Read profile from FFS fail, returned val is %d", val);
+       cmdCmeError(CME_ERR_Unknown);
+       return (ATI_FAIL);
+   }
+#endif /*_SIMULATION_*/
+
+#ifdef _SIMULATION_
+   for (i = 0; i < atw_profile_simu[nProfile][0] ; i ++)
+   {
+      profile_read [i] = atw_profile_simu [nProfile][i];
+      TRACE_EVENT_P2 ("index %d, profile_read is: %d ", i, profile_read [i]);
+   }
+#endif /*_SIMULATION_*/
+   return (ATI_CMPL);
+}
+
+/*
++------------------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : ATI_BAS                            |
+| STATE   : code                  ROUTINE : set_param_to_the_retrieved_value   |
++------------------------------------------------------------------------------+
+
+  PURPOSE : this function handles command parameters.
+*/
+LOCAL T_ATI_RSLT set_param_to_the_retrieved_value(UBYTE srcId, UBYTE *string)
+{
+    int para = * (string+4); /*this is for functions with input param of type int*/
+    CHAR para1 = * (string+4); /*this is for functions with input param of type char*/
+    T_ATI_RSLT atiRet = ATI_FAIL;
+    T_ACI_RETURN aciRet = AT_FAIL;
+
+    TRACE_FUNCTION ("set_param_to_the_retrieved_value()");
+
+    /* string[2] is always the token and string[3] always the length.
+       so far we only have parameters with 1 byte length.*/
+    if ( *(string+2) EQ SIGNED_VALUE AND *(string+3) EQ sizeof (UBYTE))
+    {
+       para = ((* (string+4) > 127) ? *(string+4) -256: *(string+4));
+    }
+    para1 = (CHAR)(para + '0'); /*Transform to the corresponding inern value of the corresponding character*/
+    switch (*string)
+    {
+      case AT_CMD_CGREG:
+#if defined (GPRS) AND defined (DTI)
+        atiRet = setatPlusCGREG ( &para1, srcId);
+#else
+        atiRet = ATI_CMPL;
+#endif   /*GPRS*/
+        break;
+     case AT_CMD_P_CGREG:
+#if defined (GPRS) AND defined (DTI)
+        atiRet = setatPercentCGREG (&para1, srcId);
+#else
+        atiRet = ATI_CMPL;
+#endif /*GPRS*/
+        break;
+     case AT_CMD_CGAATT:
+#if defined (GPRS) AND defined (DTI)
+        aciRet = sAT_PercentCGAATT ((T_ACI_CMD_SRC)srcId, (T_CGAATT_ATTACH_MODE)para,
+                             (T_CGAATT_DETACH_MODE)((*(string+7) > 127) ? (*(string+7) - 256 ): *(string+7)));
+#else
+        aciRet =  AT_CMPL;
+#endif /*GPRS*/
+        break;
+
+     case AT_CMD_CLIP:
+        atiRet = setatPlusCLIP ( &para1, srcId );
+        break;
+     case AT_CMD_CPI:
+        ati_user_output_cfg[srcId].CPI_stat = string[4];
+        atiRet = ATI_CMPL;
+        break;
+     case AT_CMD_COLP:
+        atiRet = setatPlusCOLP (&para1, srcId);
+        break;
+     case AT_CMD_CLIR:
+        aciRet = sAT_PlusCLIR ( (T_ACI_CMD_SRC)srcId,(T_ACI_CLIR_MOD)para);
+        break;
+     case AT_CMD_ALS:
+        aciRet = sAT_PercentALS ((T_ACI_CMD_SRC)srcId,(T_ACI_ALS_MOD)para);
+        break;
+     case AT_CMD_CREG:
+        atiRet = setatPlusCREG ( &para1, srcId);
+        break;
+     case AT_CMD_P_CREG:
+        atiRet = setatPercentCREG ( &para1, srcId);
+        break;
+     default:
+        break;
+   }
+
+   if (atiRet EQ ATI_FAIL AND aciRet EQ AT_FAIL )
+   {
+      TRACE_EVENT_P1("Set function fails for command id %d.", *string);
+      cmdCmeError(CME_ERR_Unknown);
+      return( ATI_FAIL );
+   }
+   return (ATI_CMPL);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : ATI_BAS                  |
+| STATE   : code                  ROUTINE : ati_zn_retrieve_params   |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the implementation of AT command ATZn (n>0),
+            which retrieve profile from FFS.
+*/
+GLOBAL void ati_zn_retrieve_params ( UBYTE srcId )
+{
+   int index = 1;
+   UBYTE *profile_read = NULL;
+   UBYTE *string = NULL;
+   USHORT len_prof_read = 0;
+
+   TRACE_FUNCTION ("ati_zn_retrieve_params()");
+/*
+ *-------------------------------------------------------------------
+ * check parameter profile
+ *-------------------------------------------------------------------
+ */
+  if( ATZprofile < 1                      OR
+      ATZprofile > MAX_ATW_STORED_PROFILE    )
+  {
+    return;
+  }
+  len_prof_read = (MAX_ATW_CHOSEN_CMD_NB) * (MAX_ONE_ATW_PRO_LEN) + 1;
+  TRACE_EVENT_P1 ("length of profile read is %d", len_prof_read);
+  ACI_MALLOC (profile_read, len_prof_read);
+
+  if (read_profile_from_ffs ((SHORT)(ATZprofile - 1), profile_read, len_prof_read) NEQ ATI_CMPL)
+  {
+    TRACE_EVENT ("read_profile_from_ffs() fail...");
+    ACI_MFREE (profile_read);
+    return;
+  }
+/*profile has no content*/
+  if (*profile_read EQ 1)
+  {
+     ACI_MFREE (profile_read);
+     return;
+  }
+  do
+  {
+     string = profile_read + index; /*index points to the first element of a command profile, which is command id*/
+     index += *(profile_read+index +1);/*the second element in the profile is profile length for the command*/
+     if (set_param_to_the_retrieved_value (srcId, string) EQ ATI_FAIL)
+     {
+        ACI_MFREE (profile_read);
+        return;
+     }
+  }while (index < *profile_read);/*the first element of the whole profile is the total length*/
+
+  ACI_MFREE (profile_read);
+  return;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndW             |
++--------------------------------------------------------------------+
+
+  PURPOSE : &W command stores profiles to FFS
+*/
+
+GLOBAL T_ATI_RSLT atAndW (char *cl, UBYTE srcId)
+{
+  long nProfile = ACI_NumParmNotPresent;
+  char *end;
+
+  TRACE_FUNCTION("atAndW()");
+
+  nProfile = strtol(cl, &end, 10);
+  if(*end)
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+  /*
+   *  Normally omitted value should be assumed as zero
+   *  but AT&W does not support profile number zero.
+   *  So an omitted profile will be assumed as 1.
+   */
+  if(cl EQ end)
+  {
+    nProfile = 1;
+  }
+
+  if( nProfile < 1 OR nProfile > MAX_ATW_STORED_PROFILE )
+  {
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+
+  switch (ati_wn_store_params( srcId, (SHORT) (nProfile - 1)))
+  {
+    case ATI_CMPL:
+      return ATI_CMPL;
+    default:
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atZ                |
++--------------------------------------------------------------------+
+
+  PURPOSE : Z command (reset DCE and terminate any call in progress)
+*/
+
+GLOBAL T_ATI_RSLT atZ(char *cl, UBYTE srcId)
+{
+  char  *end                   = NULL;
+  UBYTE value                  = (UBYTE)strtol(cl, &end, 10);
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("atZ()");
+
+  if(*end)
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+  if( value > MAX_ATW_STORED_PROFILE )
+  {
+    cmdAtError(atError);
+    return( ATI_FAIL );
+  }
+
+  ATZprofile = value;
+
+#ifdef FF_ATI_BAT
+  {
+    T_BAT_cmd_send     cmd;
+    T_BAT_no_parameter dummy;
+    cmd.ctrl_params     = BAT_CMD_AT_Z;
+    dummy.bat_dummy     = 0xFF;
+    cmd.params.ptr_at_z = &dummy;
+    if( at.rngPrms.isRng EQ TRUE )
+    {
+      ati_stop_ring();
+    }
+    src_params->curAtCmd = AT_CMD_Z;
+
+    bat_send(ati_bat_get_client(srcId), &cmd);
+
+    return (ATI_EXCT); /* executing, because response is passed by callback function */ 
+  } 
+#else /* no FF_ATI_BAT */
+
+  switch(sAT_Z( (T_ACI_CMD_SRC)srcId, 0 ))
+  {
+    case AT_CMPL:
+      return ATI_CMPL;
+    case AT_EXCT:
+      if( at.rngPrms.isRng EQ TRUE )
+      {
+        ati_stop_ring();
+      }
+      src_params->curAtCmd    = AT_CMD_Z;
+      return ATI_EXCT;
+    default:
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+
+#endif /* no FF_ATI_BAT */
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCPAS         |
++--------------------------------------------------------------------+
+
+  PURPOSE : Phone activity status
+*/
+GLOBAL T_ATI_RSLT setatPlusCPAS(char *cl, UBYTE srcId)
+{
+  T_ACI_CPAS_PAS pas = CPAS_PAS_NotPresent;
+  T_ACI_RETURN ret = AT_FAIL;
+
+  TRACE_FUNCTION("setatPlusCPAS()");
+
+  if (*cl NEQ '\0' AND *cl NEQ ';')
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+#ifdef FF_ATI_BAT
+  {
+  T_BAT_cmd_send cmd;
+  T_BAT_no_parameter my_bat_set_plus_cpas;
+  
+  TRACE_FUNCTION("setatPlusCPAS() calls bat_send() <=== as APPLICATION");
+  
+  ret = qAT_PlusCPAS( srcId, &pas );
+  if (ret EQ AT_CMPL)
+  {
+    resp_disp(srcId, cl, "e", &pas);
+  }
+  else
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+  cmd.params.ptr_set_plus_cpas = &my_bat_set_plus_cpas;
+  bat_send(ati_bat_get_client(srcId), &cmd);
+  return ATI_EXCT; /* executing, because response is passed by callback function */
+  }
+#else /* OLD FUNCTION BODY */
+
+  ret = qAT_PlusCPAS( (T_ACI_CMD_SRC)srcId, &pas );
+  if (ret EQ AT_CMPL)
+  {
+    resp_disp(srcId, cl, "e", &pas);
+    return ATI_CMPL;
+  }
+  else
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+#endif /* no FF_ATI_BAT*/
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCLAE         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CLAE command (Language Event)
+*/
+
+GLOBAL T_ATI_RSLT setatPlusCLAE (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN ret = AT_FAIL;
+  T_ACI_CLAE_MOD mode = CLAE_MOD_NotPresent;
+
+  TRACE_FUNCTION("setatPLusCLAE()");
+
+  switch(*cl)
+  {
+    case('0'):
+      mode=CLAE_MOD_Disable;
+      break;
+    case('1'):
+      mode=CLAE_MOD_Enable;
+      break;
+    default:
+      cmdCmeError(CME_ERR_OpNotAllow);
+      return ATI_FAIL;
+  }
+  ret = sAT_PlusCLAE((T_ACI_CMD_SRC)srcId,mode);
+  if (ret EQ AT_CMPL)
+    return ATI_CMPL;
+  else
+    return ATI_FAIL;
+}
+
+GLOBAL T_ATI_RSLT queatPlusCLAE (char *cl, UBYTE srcId)
+{
+  char *me="+CLAE: ";
+  T_ACI_RETURN ret = AT_FAIL;
+  T_ACI_CLAE_MOD mode=CLAE_MOD_NotPresent;
+
+  TRACE_FUNCTION("queatPLusCLAE()");
+
+  ret = qAT_PlusCLAE((T_ACI_CMD_SRC)srcId,&mode);
+  if(ret EQ AT_CMPL)
+  {
+    sprintf(g_sa,"%s%d",me,mode);
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+  else
+  {
+    cmdCmeError(CME_ERR_Unknown);
+    return ATI_FAIL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndC             |
++--------------------------------------------------------------------+
+
+  PURPOSE : &C command reset to factory default (not the final version)
+*/
+
+
+GLOBAL T_ATI_RSLT atAndC (char *cl, UBYTE srcId)
+{
+  T_ACI_DCD_MOD val;
+
+  TRACE_FUNCTION("atAndC()");
+
+  switch(*cl)
+  {
+    case '\0':
+    case  '0':
+      val = DCD_ALWAYS_ON;
+      break;
+
+    case  '1':
+      val = DCD_DISABLE_AFTER_CALL;
+      break;
+#ifdef RMV_01_06_04
+    case ('?'):
+      qAT_AndC( srcId, &val );
+      sprintf(g_sa, "&C: %d", val);
+      io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+      return (ATI_CMPL);
+#endif
+    default:
+      cmdAtError(atError);
+      return(ATI_FAIL);
+  }
+
+#ifdef DTI
+  if (sAT_AndC( (T_ACI_CMD_SRC)srcId, val ) EQ AT_CMPL)
+  {
+    return (ATI_CMPL);
+  }
+#endif
+  cmdAtError(atError);
+  return (ATI_FAIL);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndD             |
++--------------------------------------------------------------------+
+
+  PURPOSE : &D command to set the DTR behaviour
+*/
+
+
+GLOBAL T_ATI_RSLT atAndD (char *cl, UBYTE srcId)
+{
+  UBYTE val;
+
+  TRACE_FUNCTION("atAndD()");
+
+  switch(*cl)
+  {
+    case ('\0'):
+    case ('0'):
+      val = 0;
+      break;
+    case ('1'):
+      val = 1;
+      break;
+    case ('2'):
+      val = 2;
+      break;
+#ifdef RMV_01_06_04
+    case ('?'):
+      query = TRUE;
+      break;
+#endif
+    default:
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+
+#ifdef RMV_01_06_04
+  if (query)
+  {
+    ret=qAT_AndD (srcId, &val);
+    if(ret EQ AT_CMPL)
+    {
+      sprintf(g_sa,"&D: %d", val);
+      io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+      return ATI_CMPL;
+    }
+  }
+  else
+#endif
+  {
+#ifdef DTI
+    if (sAT_AndD ( (T_ACI_CMD_SRC)srcId, val ) EQ AT_CMPL)
+    {
+      return ATI_CMPL;
+    }
+#endif
+  }
+  cmdAtError(atError);
+  return ATI_FAIL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndF             |
++--------------------------------------------------------------------+
+
+  PURPOSE : &F command reset to factory default (not the final version)
+*/
+GLOBAL T_ATI_RSLT atAndF (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN ret = AT_FAIL;
+
+  TRACE_FUNCTION("atAndF()");
+
+  switch(*cl)
+  {
+    case '\0':
+    case ('0'):
+      /* default like ATZ */
+      ati_cmd_reset(srcId);
+      break;
+    case ('1'):
+      ati_cmd_reset(srcId);
+
+      /*
+       *  An other manufacturer specific parameter set.
+       *
+       *  This is different from the user specific profiles (ATZ1).
+       *
+       */
+      at.flags.COLP_stat = 1;
+      ati_user_output_cfg[srcId].CR_stat = 1;
+      ati_user_output_cfg[srcId].CRC_stat = 1;
+      ati_user_output_cfg[srcId].CLIP_stat = 1;
+      ati_user_output_cfg[srcId].DR_stat = 1;
+
+      ati_user_output_cfg[srcId].creg.mod_lac_cid.pres_mode = CREG_MOD_ON;
+
+#ifdef GPRS
+      ati_gprs_user_output_cfg[srcId].plus_cgreg.mod_lac_cid.pres_mode = CREG_MOD_ON;
+      ati_gprs_user_output_cfg[srcId].percent_cgreg.mod_lac_cid.pres_mode = CREG_MOD_ON;
+#endif
+      break;
+    default:
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+
+  /*
+   *  The function sAT_AndF will be called with value 0 -> AT&F0
+   *  because the different behavior of value 0 to 1 is only ATI
+   *  related and sAT_AndF() is only CMH-related.
+   *
+   *  This is different from sAT_Z().
+   */
+  ret = sAT_AndF( (T_ACI_CMD_SRC)srcId, 0 );
+  if (ret EQ AT_CMPL)
+  {
+    return ATI_CMPL;
+  }
+  cmdAtError(atError);
+  return ATI_FAIL;
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atAndK             |
++--------------------------------------------------------------------+
+
+  PURPOSE : &K only for compatibility
+*/
+
+
+GLOBAL T_ATI_RSLT atAndK (char *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("atAndK()");
+
+  switch(*cl)
+  {
+    case ('0'):
+    case ('1'):
+    case ('2'):
+    case ('3'):
+    case ('4'):
+      return ATI_CMPL;
+    default:
+      cmdAtError(atError);
+      return ATI_FAIL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCSQ          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CSQ, signal quality
+*/
+
+GLOBAL T_ATI_RSLT setatPlusCSQ ( char *cl, UBYTE srcId)
+{
+  rx_Status_Type    rxStat;
+  UBYTE             rssi;
+  UBYTE             ber;
+
+  TRACE_FUNCTION("setatPlusCSQ()");
+
+  if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
+  {
+    cmdCmeError ( CME_ERR_Unknown );
+    return ATI_FAIL;
+  }
+  else
+  {
+    if ( rxStat.gsmLevel EQ 0xFF OR rxStat.gsmLevel EQ 0 )
+    {
+      rssi = ACI_RSSI_FAULT;
+    }
+    else if ( rxStat.gsmLevel > 59 )
+    {
+      rssi = 31;
+    }
+    else
+    {
+      rssi = ( rxStat.gsmLevel / 2 ) + 2;
+    }
+
+    if ( rxStat.rxQuality EQ RX_QUAL_UNAVAILABLE )
+    {
+      ber = ACI_BER_FAULT;
+    }
+    else
+    {
+      ber = rxStat.rxQuality;
+    }
+
+    sprintf (g_sa, "+CSQ: %d,%d ", rssi, ber );
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+}
+
+GLOBAL T_ATI_RSLT tesatPlusCSQ(CHAR *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("tesatPLusCSQ()");
+
+  sprintf (g_sa, "+CSQ: 2-31,(%d),(%d)", ACI_RSSI_FAULT, ACI_BER_FAULT );
+  io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCSQ          |
++--------------------------------------------------------------------+
+
+  PURPOSE : %CSQ, signal quality
+
+  Shen,Chao Juni.12th.2003
+*/
+
+GLOBAL T_ATI_RSLT setatPercentCSQ ( char *cl, UBYTE srcId)
+{
+  T_ACI_CSQ_MODE CSQmode = CSQ_Disable;
+  rx_Status_Type  rxStat;
+
+
+  TRACE_FUNCTION("setatPercentCSQ()");
+
+  if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
+  {
+    cmdCmeError ( CME_ERR_Unknown );
+    return ATI_FAIL;
+  }
+  else
+  {
+    switch( *cl )
+    {
+      case '0':
+      {
+        CSQmode = CSQ_Disable;
+        break;
+      }
+
+      case '1':
+      {
+        CSQmode = CSQ_Enable;
+        break;
+      }
+
+      default:
+      {
+        cmdCmeError(CME_ERR_Unknown);
+        return (ATI_FAIL);
+      }
+    }
+#ifdef FF_ATI_BAT
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_cmd_set_percent_csq csq;
+    T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+    TRACE_FUNCTION("setatPercentCSQ() calls bat_send() <=== as APPLICATION");
+
+    cmd.ctrl_params = BAT_CMD_SET_PERCENT_CSQ;
+    cmd.params.ptr_set_percent_csq = &csq;
+    csq.csq_mode = CSQmode;
+    src_params->curAtCmd = AT_CMD_P_CSQ;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+
+    return ATI_EXCT;
+  }
+#else
+    if (sAT_PercentCSQ((T_ACI_CMD_SRC)srcId,CSQmode) NEQ AT_CMPL)
+    {
+      TRACE_EVENT("setatPercentCSQ call sAT_PercentCSQ Error!!");
+    }
+
+    sprintf (g_sa, "%s%d ", "%CSQ: ", CSQmode);
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+#endif /* FF_ATI_BAT */
+  }
+}
+
+
+GLOBAL T_ATI_RSLT queatPercentCSQ(CHAR *cl, UBYTE srcId)
+{
+  rx_Status_Type    rxStat;
+
+  TRACE_FUNCTION("queatPercentCSQ()");
+
+#ifdef FF_PS_RSSI
+  qAT_PercentCSQ((T_ACI_CMD_SRC)srcId,&rxStat.gsmLevel,&rxStat.rxQuality,&rxStat.actLevel,&rxStat.min_access_level);
+  sprintf (g_sa, "%s %d, %d, %d, %d", "%CSQ: ",rxStat.gsmLevel, rxStat.rxQuality, rxStat.actLevel, rxStat.min_access_level);
+#else
+  qAT_PercentCSQ((T_ACI_CMD_SRC)srcId,&rxStat.gsmLevel,&rxStat.rxQuality,&rxStat.actLevel);
+  sprintf (g_sa, "%s %d, %d, %d", "%CSQ: ",rxStat.gsmLevel, rxStat.rxQuality, rxStat.actLevel);
+#endif
+  io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+
+  return ATI_CMPL;
+}
+
+
+GLOBAL T_ATI_RSLT tesatPercentCSQ(CHAR *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("tesatPercentCSQ()");
+
+#ifdef FF_PS_RSSI
+  sprintf (g_sa, "%s (%d), (%d), (%d), 0-4", "%CSQ: ",ACI_RSSI_FAULT, ACI_BER_FAULT, ACI_MIN_RXLEV_FAULT);
+#else
+  sprintf (g_sa, "%s (%d), (%d), 0-4", "%CSQ: ",ACI_RSSI_FAULT, ACI_BER_FAULT);
+#endif
+  io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+  return ATI_CMPL;
+}
+
+#ifdef TI_PS_FF_AT_P_CMD_DBGINFO
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPercentDBGINFO   |
++--------------------------------------------------------------------+
+
+  PURPOSE : %DBGINFO, query free mem pool blocks.
+*/
+
+GLOBAL T_ATI_RSLT setatPercentDBGINFO ( char *cl, UBYTE srcId)
+{
+  char *me            = "%DBGINFO:";
+  ULONG param         = 0;
+  T_ACI_DBG_INFO stor = P_DBGINFO_NotPresent;
+  CHAR type[4]        = {0};
+  USHORT free = 0, alloc = 0, i = 0;
+
+  TRACE_FUNCTION("queatPercentDBGINFO()");
+
+  cl = parse(cl,"sd",(LONG)4, type, &param);
+  if(!cl OR *type EQ '\0')
+  {
+    cmdCmeError(CME_ERR_OpNotAllow);
+    return (ATI_FAIL);
+  }
+  strupper(type);
+  for(i=0;dbg_mem_names[i].name NEQ 0;i++)
+  {
+    if (!strcmp(dbg_mem_names[i].name, type) )
+    {
+      stor = dbg_mem_names[i].stor;
+      break;
+    }
+  }
+  if((dbg_mem_names[i].name EQ 0) OR (param EQ 0))
+  {
+    cmdCmeError(CME_ERR_OpNotAllow);
+    return (ATI_FAIL);
+  }
+  if (qAT_PercentDBGINFO((T_ACI_CMD_SRC)srcId, param, (USHORT)stor, &free, &alloc) NEQ AT_CMPL)
+  {
+    cmdCmeError(CME_ERR_Unknown);
+    return (ATI_FAIL);
+  }
+  sprintf(g_sa, "%s%d", me, free);
+  io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+
+  return (ATI_CMPL);
+}
+#endif /* TI_PS_FF_AT_P_CMD_DBGINFO */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCBC          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CBC, battery charge
+*/
+#define ACI_BCS_BattPower  0
+#define ACI_BCS_BattCnctd  1
+#define ACI_BCS_NoBatt     2
+#define ACI_BCS_PowerFault 3
+
+GLOBAL T_ATI_RSLT atPlusCBC ( char *cl, UBYTE srcId )
+{
+  struct fchg_user_state fchg;
+  UBYTE           bcs;
+
+  TRACE_FUNCTION("atPlusCBC()");
+
+#ifdef RVM_FCHG_SWE
+  if (fchg_get_current_state(&fchg) == RV_OK)
+  {
+    switch (fchg.chg_state)
+    {
+      case FCHG_STATE_CI_CHARGING:
+      case FCHG_STATE_CV_CHARGING:
+        bcs = ACI_BCS_BattCnctd;
+        break;
+
+      default:
+        bcs = ACI_BCS_BattPower;
+    }
+  }
+  else
+  {
+    bcs = ACI_BCS_PowerFault;
+    fchg.batt_percent = 0;
+  }
+#else
+  bcs = ACI_BCS_NoBatt;
+  fchg.batt_percent = 0;
+#endif
+
+  sprintf(g_sa, "+CBC: %d,%d", bcs, fchg.batt_percent );
+  io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCLVL         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CLVL, loudspeaker volume level
+*/
+GLOBAL T_ATI_RSLT setatPlusCLVL ( char *cl, UBYTE srcId )
+{
+#ifdef FF_ATI_BAT
+  {
+  T_BAT_cmd_send cmd;
+  T_BAT_cmd_set_plus_clvl my_bat_set_plus_clvl;
+  SHORT vol;
+
+  TRACE_FUNCTION("setatPlusCLVL() calls bat_send() <=== as APPLICATION");
+
+  cl = parse ( cl, "d", &vol );
+
+  if( !cl OR vol > 255 OR vol < 0 )
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+
+  memset(&my_bat_set_plus_clvl, 0, sizeof(my_bat_set_plus_clvl));
+  cmd.ctrl_params = BAT_CMD_SET_PLUS_CLVL;
+  cmd.params.ptr_set_plus_clvl = &my_bat_set_plus_clvl;
+
+  my_bat_set_plus_clvl.level = (U8)vol;
+
+  bat_send(ati_bat_get_client(srcId), &cmd);
+
+  return ATI_EXCT; /* executing, because response is passed by callback function */
+  }
+#else /* OLD FUNCTION BODY */
+
+  TRACE_FUNCTION("setatPlusCLVL()");
+
+  return setaciPrcsVolLevel ( cl, AUDIO_SPEAKER );
+
+#endif /* no FF_ATI_BAT*/
+}
+
+GLOBAL T_ATI_RSLT tesatPlusCLVL ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("tesatPlusCLVL()");
+
+  return tesaciPrcsVolLevel ( srcId, cl, AUDIO_SPEAKER );
+}
+
+GLOBAL T_ATI_RSLT queatPlusCLVL ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("queatPlusCLVL()");
+
+  return queaciPrcsVolLevel ( srcId, cl, AUDIO_SPEAKER );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCRSL         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CRSL, ringer sound level
+*/
+GLOBAL T_ATI_RSLT setatPlusCRSL ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusCRSL()");
+
+  return setaciPrcsVolLevel ( cl, AUDIO_BUZZER );
+}
+
+GLOBAL T_ATI_RSLT tesatPlusCRSL ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("tesatPlusCRSL()");
+
+  return tesaciPrcsVolLevel ( srcId, cl, AUDIO_BUZZER );
+}
+
+GLOBAL T_ATI_RSLT queatPlusCRSL ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("queatPlusCRSL()");
+
+  return queaciPrcsVolLevel ( srcId, cl, AUDIO_BUZZER );
+}
+
+/*
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : aciPrcsVolLevel    |
+
+  PURPOSE : +CLVL, +CRSL loudspeaker volume level
+*/
+LOCAL T_ATI_RSLT setaciPrcsVolLevel ( CHAR* cl, UBYTE device )
+{
+  SHORT vol;
+
+  cl = parse ( cl, "d", &vol );
+
+  if( !cl OR vol > 255 OR vol < 0 )
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+  else
+  {
+    if ( audio_SetAmplf( device, ( UBYTE ) vol ) NEQ DRV_OK )
+    {
+      cmdCmeError ( CME_ERR_Unknown );
+      return ATI_FAIL;
+    }
+  }
+  return ATI_CMPL;
+}
+
+LOCAL T_ATI_RSLT tesaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device )
+{
+  CHAR *p_sa;
+  audio_Status_Type audioStat;
+
+  switch (device)
+  {
+    case AUDIO_SPEAKER:
+      p_sa = "CLVL";
+      break;
+    case AUDIO_BUZZER:
+      p_sa = "CRSL";
+      break;
+    default:
+      cmdCmeError ( CME_ERR_Unknown );
+      return ATI_FAIL;
+  }
+
+  if ( audio_GetStatus ( device, &audioStat ) NEQ DRV_OK )
+  {
+    cmdCmeError ( CME_ERR_Unknown );
+    return ATI_FAIL;
+  }
+  {
+    sprintf( g_sa, "+%s: (%d-%d)", p_sa, audioStat.min_volume, audioStat.max_volume );
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+  }
+  return ATI_CMPL;
+}
+
+
+LOCAL T_ATI_RSLT queaciPrcsVolLevel ( UBYTE srcId, CHAR* cl, UBYTE device )
+{
+  SHORT  vol;
+  UBYTE  drvVol;
+  CHAR *p_sa;
+
+  switch (device)
+  {
+    case AUDIO_SPEAKER:
+      p_sa = "CLVL";
+      break;
+    case AUDIO_BUZZER:
+      p_sa = "CRSL";
+      break;
+    default:
+      cmdCmeError ( CME_ERR_Unknown );
+      return ATI_FAIL;
+  }
+
+  if ( audio_GetAmplf ( device, &drvVol ) NEQ DRV_OK )
+  {
+    cmdCmeError ( CME_ERR_Unknown );
+    return ATI_FAIL;
+  }
+  else
+  {
+    vol = drvVol;
+    sprintf ( g_sa, "+%s: %d", p_sa, vol );
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+  }
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCMUT         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CMUT, mute control
+*/
+#define ACI_MUTE_OFF 0
+#define ACI_MUTE_ON  1
+
+GLOBAL T_ATI_RSLT setatPlusCMUT(CHAR *cl, UBYTE srcId)
+{
+  SHORT mute;
+  UBYTE drvMute;
+
+  cl = parse ( cl, "d", &mute );
+
+  if( !cl OR ( mute NEQ ACI_MUTE_OFF AND mute NEQ ACI_MUTE_ON ) )
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+  if ( mute EQ ACI_MUTE_OFF )
+  {
+    drvMute = AUDIO_MUTING_OFF;
+  }
+  else
+  {
+    drvMute = AUDIO_MUTING_ON;
+  }
+  if (audio_SetMute (AUDIO_MICROPHONE, drvMute) NEQ DRV_OK)
+  {
+    cmdCmeError ( CME_ERR_Unknown );
+    return ATI_FAIL;
+  }
+
+#ifdef FF_ATI_BAT
+  {
+  T_BAT_cmd_send cmd;
+  T_BAT_cmd_set_plus_cmut my_bat_set_plus_cmut;
+
+  TRACE_FUNCTION("setatPlusCMUT() calls bat_send() <=== as APPLICATION");
+
+  memset(&my_bat_set_plus_cmut, 0, sizeof(my_bat_set_plus_cmut));
+  cmd.ctrl_params = BAT_CMD_SET_PLUS_CMUT;
+  cmd.params.ptr_set_plus_cmut = &my_bat_set_plus_cmut;
+  my_bat_set_plus_cmut.n = (T_BAT_plus_cmut_n)drvMute;
+  bat_send(ati_bat_get_client(srcId), &cmd);
+  return ATI_EXCT; /* executing, because response is passed by callback function */
+  }
+#else /* OLD FUNCTION BODY */
+
+  TRACE_FUNCTION("setatPLusCMUT()");
+
+  return ATI_CMPL;
+
+#endif /* no FF_ATI_BAT */
+}
+
+GLOBAL T_ATI_RSLT tesatPlusCMUT ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("tesatPlusCMUT()");
+
+  sprintf(g_sa, "+CMUT: (%d,%d)", ACI_MUTE_OFF, ACI_MUTE_ON );
+  io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
+  return ATI_CMPL;
+}
+
+GLOBAL T_ATI_RSLT queatPlusCMUT(CHAR *cl, UBYTE srcId)
+{
+  SHORT mute;
+  UBYTE drvMute;
+
+  TRACE_FUNCTION("queatPlusCMUT()");
+
+  if ( audio_GetMute ( AUDIO_MICROPHONE, &drvMute ) NEQ DRV_OK )
+  {
+    cmdCmeError ( CME_ERR_Unknown );
+    return ATI_FAIL;
+  }
+  else
+  {
+    if ( drvMute EQ AUDIO_MUTING_OFF )
+    {
+      mute = ACI_MUTE_OFF;
+    }
+    else
+    {
+      mute = ACI_MUTE_ON;
+    }
+
+    sprintf ( g_sa, "+CMUT: %d", mute );
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGMI         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CGMI, show name of manufacturer
+*/
+GLOBAL T_ATI_RSLT atPlusCGMI ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusCGMI()");
+
+  return aciPrcsPlusCG (srcId, cl, EF_CGMI_ID);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGMM         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CGMM, show name of prodcut
+*/
+GLOBAL T_ATI_RSLT atPlusCGMM ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusCGMM()");
+
+  return aciPrcsPlusCG (srcId, cl, EF_CGMM_ID);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGMR         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CGMR, show version of product
+*/
+GLOBAL T_ATI_RSLT atPlusCGMR ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusCGMR()");
+
+  return aciPrcsPlusCG (srcId, cl, EF_CGMR_ID);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCGSN         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CGSN, show serial number
+*/
+GLOBAL T_ATI_RSLT atPlusCGSN ( char *cl, UBYTE srcId )
+{
+  int i;
+  UBYTE      IMEIBuf[CL_IMEI_SIZE];      /* IMEI buffer */
+  T_ACI_IMEI imei;
+
+  TRACE_FUNCTION("atPlusCGSN()");
+
+  /*
+   * New FreeCalypso logic:
+   *
+   * look for /pcm/CGSN first, using direct FFS API rather than PCM;
+   * if /pcm/CGSN is present, return the string stored in there;
+   * if no /pcm/CGSN, return 15-digit IMEI with computed check digit.
+   */
+
+  i = ffs_file_read("/pcm/CGSN", (UBYTE *)g_sa, SIZE_EF_CGSN);
+  if (i > 0)
+    g_sa[i] = '\0';
+  else {
+    cl_get_imeisv(CL_IMEI_SIZE, IMEIBuf, CL_IMEI_GET_STORED_IMEI);
+    imei.tac1 = IMEIBuf[0];
+    imei.tac2 = IMEIBuf[1];
+    imei.tac3 = IMEIBuf[2];
+    imei.fac  = IMEIBuf[3];
+    imei.snr1 = IMEIBuf[4];
+    imei.snr2 = IMEIBuf[5];
+    imei.snr3 = IMEIBuf[6];
+    imei.svn  = IMEIBuf[7];
+    imei.cd   = cmhSS_getCdFromImei ( &imei );
+    sprintf(g_sa, "%02x%02x%02x%02x%02x%02x%02x%d",
+            imei.tac1, imei.tac2, imei.tac3, imei.fac,
+            imei.snr1, imei.snr2, imei.snr3, imei.cd);
+  }
+
+  io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
+
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusFMI          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +FMI, show name of manufacturer
+*/
+GLOBAL T_ATI_RSLT atPlusFMI ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusFMI()");
+
+  if ( *cl NEQ '?')
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+  return aciPrcsPlusCG (srcId, cl, EF_CGMI_ID);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusFMM          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +FMM, show name of prodcut
+*/
+GLOBAL T_ATI_RSLT atPlusFMM ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusFMM()");
+
+  if ( *cl NEQ '?')
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+  return aciPrcsPlusCG (srcId, cl, EF_CGMM_ID);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusFMR          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +FMR, show version of product
+*/
+GLOBAL T_ATI_RSLT atPlusFMR ( char *cl, UBYTE srcId )
+{
+  TRACE_FUNCTION("atPlusFMR()");
+
+  if ( *cl NEQ '?')
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+  return aciPrcsPlusCG (srcId, cl, EF_CGMR_ID);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : aciPrcsPlusCG      |
++--------------------------------------------------------------------+
+
+  PURPOSE :
+*/
+LOCAL T_ATI_RSLT aciPrcsPlusCG (UBYTE srcId, CHAR* cl, CHAR* ef)
+{
+  pcm_FileInfo_Type fileInfo;
+  USHORT i;
+  char *cp;
+
+  TRACE_FUNCTION("aciPrcsPlusCG()");
+
+  if (pcm_GetFileInfo ((UBYTE* )ef, &fileInfo) NEQ DRV_OK)
+  {
+    cmdCmeError (CME_ERR_MemFail);
+    return ATI_FAIL;
+  }
+
+  if (pcm_ReadFile ((UBYTE*)ef, fileInfo.FileSize,
+                    (UBYTE*)g_sa, &fileInfo.Version) NEQ DRV_OK)
+  {
+    cmdCmeError (CME_ERR_MemFail);
+    return ATI_FAIL;
+  }
+
+  i = 0;
+  while ((UBYTE)g_sa[i] NEQ 0xFF AND i < fileInfo.FileSize)
+    i++;
+  g_sa[i] = '\0';
+
+#ifdef CONFIG_MOKOFFS
+  /*
+   * Openmoko's FFS has a /pcm/CGMR file programmed like this:
+   *
+   *   GTA02BV4/Moko5
+   *
+   * When queried for +CGMR, we would like to report the hardware revision
+   * from FFS, but also tell the user that we are FreeCalypso and not Moko5.
+   * Hence the following hack.
+   */
+  if ((cp = strchr(g_sa, '/')) && !strncmp(cp + 1, "Moko", 4))
+    strcpy(cp + 1, "FreeCalypso");
+#endif
+
+  io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT );
+
+  return ATI_CMPL;
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCSCS         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CSCS command (Select TE character set)
+*/
+GLOBAL T_ATI_RSLT setatPlusCSCS (char *cl, UBYTE srcId)
+{
+  CHAR             txtChset[10];
+  T_ACI_CSCS_CHSET chset         = CSCS_CHSET_NotPresent;
+
+  TRACE_FUNCTION("setatPlusCSCS()");
+
+  cl = parse ( cl, "s", (LONG) sizeof (txtChset), txtChset);
+
+  if      ( strcmp ( txtChset, "GSM"     ) EQ 0 )
+    chset = CSCS_CHSET_Gsm;
+  else if ( strcmp ( txtChset, "IRA"     ) EQ 0 )
+    chset = CSCS_CHSET_Ira;
+  else if ( strcmp ( txtChset, "PCCP437" ) EQ 0 )
+    chset = CSCS_CHSET_Pccp_437;
+  else if ( strcmp ( txtChset, "PCDN"    ) EQ 0 )
+    chset = CSCS_CHSET_Pcdn;
+  else if ( strcmp ( txtChset, "8859-1"  ) EQ 0 )
+    chset = CSCS_CHSET_8859_1;
+  else if ( strcmp ( txtChset, "HEX"     ) EQ 0 )
+    chset = CSCS_CHSET_Hex;
+  else if ( strcmp ( txtChset, "UCS2"     ) EQ 0 )
+    chset = CSCS_CHSET_Ucs2;
+
+  if ( !cl OR chset EQ CSCS_CHSET_NotPresent )
+  {
+    cmdCmeError ( CME_ERR_OpNotAllow );
+    return ATI_FAIL;
+  }
+
+#ifdef FF_ATI_BAT
+
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_cmd_set_plus_cscs cscs;
+
+    cmd.ctrl_params=BAT_CMD_SET_PLUS_CSCS;
+    cmd.params.ptr_set_plus_cscs=&cscs;
+    /*
+    *   This relies on T_BAT_plus_cscs being identical to
+    *   T_ACI_CSCS_CHSET. It is, apart from the NotPresent
+    *   value, which is taken care of earlier in this
+    *   function.
+    */
+    cscs.cs=(T_BAT_plus_cscs_cs)chset;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+    return(ATI_EXCT);
+  }
+
+#else 
+
+  ati_user_output_cfg[srcId].cscsChset = chset;
+  return ATI_CMPL;
+
+#endif
+}
+
+GLOBAL T_ATI_RSLT queatPlusCSCS (char *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("queatPlusCSCS()");
+
+#ifdef FF_ATI_BAT
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_no_parameter dummy;
+
+    cmd.ctrl_params=BAT_CMD_QUE_PLUS_CSCS;
+    dummy.bat_dummy = 0xFF;
+    cmd.params.ptr_que_plus_cscs = &dummy;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+  } 
+  return(ATI_EXCT);
+
+#else /* no FF_ATI_BAT */
+
+  strcpy ( g_sa, "+CSCS: ");
+
+  switch ( ati_user_output_cfg[srcId].cscsChset )
+  {
+    case (CSCS_CHSET_Ira     ): strcat (g_sa,"\"IRA\""    ); break;
+    case (CSCS_CHSET_Pcdn    ): strcat (g_sa,"\"PCDN\""   ); break;
+    case (CSCS_CHSET_8859_1  ): strcat (g_sa,"\"8859-1\"" ); break;
+    case (CSCS_CHSET_Pccp_437): strcat (g_sa,"\"PCCP437\""); break;
+    case (CSCS_CHSET_Gsm     ): strcat (g_sa,"\"GSM\""    ); break;
+    case (CSCS_CHSET_Hex     ): strcat (g_sa,"\"HEX\""    ); break;
+    case (CSCS_CHSET_Ucs2    ): strcat (g_sa,"\"UCS2\""   ); break;
+
+    /*
+     *-----------------------------------------------------------
+     * This case will be prevented during settings procedure of
+     * the TE character set ( CSCS=... )
+     *-----------------------------------------------------------
+     */
+    default: cmdCmeError ( CME_ERR_Unknown ); return ATI_FAIL;
+  }
+
+  io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+  return ATI_CMPL;
+
+#endif /* no FF_ATI_BAT */
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCMEE         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CMEE command (Error display mode)
+*/
+
+GLOBAL T_ATI_RSLT setatPlusCMEE(CHAR *cl, UBYTE srcId)
+{
+  SHORT val;
+
+  TRACE_FUNCTION("setatPLusCMEE()");
+
+  cl=parse(cl,"r",&val);
+  if ( !cl OR val > CMEE_MOD_Verbose OR val < CMEE_MOD_Disable )
+  {
+    cmdAtError(atError);
+	return ATI_FAIL;
+  }
+  else
+  {
+    TRACE_EVENT_P2("setatPlusCMEE: srcId = %d Value = %d", srcId, val);
+    ati_user_output_cfg[srcId].CMEE_stat = (UBYTE)val;
+	return ATI_CMPL;
+  }
+}
+
+
+/* query function */
+
+GLOBAL T_ATI_RSLT queatPlusCMEE(CHAR *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("queatPLusCMEE()");
+
+  TRACE_EVENT_P1("queatPlusCMEE: srcId = %d", srcId);
+  resp_disp(srcId, cl,"b",&ati_user_output_cfg[srcId].CMEE_stat);
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusGCAP         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +GCAP command (capability information)
+*/
+GLOBAL T_ATI_RSLT atPlusGCAP(char *cl, UBYTE srcId)
+{
+  if (*cl EQ '\0')
+  {
+#ifdef FAX_AND_DATA
+
+#ifdef FF_FAX
+
+#ifdef V42BIS
+    sprintf(g_sa,"+GCAP: +CGSM,+FCLASS,+DS");
+#else
+    sprintf(g_sa,"+GCAP: +CGSM,+FCLASS");
+#endif
+
+#else /* no FAX */
+
+#ifdef V42BIS
+    sprintf(g_sa,"+GCAP: +CGSM,+DS");
+#else
+    sprintf(g_sa,"+GCAP: +CGSM");
+#endif
+
+#endif /* FF_FAX */
+
+#else /* Voice only */
+
+    sprintf(g_sa,"+GCAP: +CGSM");
+
+#endif /* FAX_AND_DATA */
+
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+  else
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPercentCCBS      |
++--------------------------------------------------------------------+
+
+  PURPOSE : %CCBS command (Call Completion to Busy Subscriber)
+*/
+
+GLOBAL T_ATI_RSLT setatPercentCCBS(char *cl, UBYTE srcId)
+{
+  SHORT mode                   = ACI_NumParmNotPresent;
+  SHORT idx                    = ACI_NumParmNotPresent;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+  T_ACI_RETURN ret             = AT_FAIL;
+
+  TRACE_FUNCTION("setatPercentCCBS()");
+
+   cl = parse (cl,"rr",&mode,&idx);
+   if(!cl OR (mode NEQ ACI_NumParmNotPresent AND (mode > 1 OR mode < 0)))
+   {
+     cmdCmeError (CME_ERR_OpNotAllow);
+     return ATI_FAIL;
+   }
+
+   if( mode NEQ ACI_NumParmNotPresent )
+     at.flags.CCBS_stat=(UBYTE)mode;
+
+#ifdef FF_ATI_BAT
+
+  if (idx NEQ  ACI_NumParmNotPresent)
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_cmd_set_percent_ccbs ccbs;
+
+    cmd.ctrl_params=BAT_CMD_SET_PERCENT_CCBS;
+    cmd.params.ptr_set_percent_ccbs=&ccbs;
+    ccbs.idx=(T_BAT_percent_ccbs_idx)idx;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+    return(ATI_EXCT);
+  }
+  else
+  {
+    return(ATI_CMPL);
+  }
+
+#else /* no FF_ATI_BAT */ 
+
+   if( idx NEQ ACI_NumParmNotPresent )
+   {
+     ret = sAT_PercentCCBS((T_ACI_CMD_SRC)srcId, idx);
+     if( ret NEQ AT_EXCT )
+     {
+       cmdCmeError(CME_ERR_Unknown);
+       return ATI_FAIL;
+     }
+     src_params->curAtCmd    = AT_CMD_CCBS;
+   }
+   else
+   {
+     ret = AT_CMPL;
+   }
+   return (map_aci_2_ati_rslt(ret));
+
+#endif /* no FF_ATI_BAT */
+}
+
+GLOBAL T_ATI_RSLT queatPercentCCBS(char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN ret             = AT_FAIL;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("queatPercentCCBS()");
+
+  ret = qAT_PercentCCBS((T_ACI_CMD_SRC)srcId);
+
+  if( ret NEQ AT_EXCT )
+  {
+    cmdCmeError(CME_ERR_Unknown);
+    return ATI_FAIL;
+  }
+  src_params->curAtCmd    = AT_CMD_CCBS;
+  return (map_aci_2_ati_rslt(ret));
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCMUX         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CMUX command (multiplexer)
+*/
+GLOBAL T_ATI_RSLT setatPlusCMUX (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN ret  = AT_FAIL;
+  SHORT mode        = ACI_NumParmNotPresent;
+  SHORT subset      = 0;      /* default value */
+  UBYTE  port_speed = NOT_PRESENT_8BIT;
+  int   N1          = 64;
+                /* default value in advanced mode (other modes not supported */
+  SHORT T1          = 10;         /* (100 ms) */
+  SHORT N2          = 3;
+  SHORT T2          = 30;         /* (30 ms) */
+  SHORT T3          = 10;         /* (10 s) */
+  SHORT k           = 2;
+
+  TRACE_FUNCTION("setatPlusCMUX()");
+
+  cl = parse (cl,"rrrdrrrrr",&mode,&subset,&port_speed,&N1,&T1,&N2,&T2,&T3,&k);
+  if (!cl)
+  {
+    cmdCmeError(CME_ERR_OpNotAllow);
+    return ATI_FAIL;
+  }
+
+#ifdef DTI
+  /* values not supported */
+  if ( mode NEQ 1
+    OR subset NEQ 0
+    OR ((port_speed NEQ NOT_PRESENT_8BIT)
+      AND (convert_mux_port_speed(port_speed) EQ BD_RATE_NotPresent))
+    OR N1 < 1 OR N1 > 32768
+    OR T1 < 1 OR T1 > 255
+    OR N2 < 0 OR N2 > 100
+    OR T2 < 2 OR T2 > 255
+    OR T3 < 1 OR T3 > 255
+    OR k < 1 OR k > 7 )
+  {
+    TRACE_EVENT("at least one value is beyond capabilities");
+    cmdCmeError(CME_ERR_OpNotAllow);
+    return ATI_FAIL;
+  }
+
+#ifdef FF_ATI_BAT
+
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_cmd_set_plus_cmux cmux;
+
+    cmd.ctrl_params=BAT_CMD_SET_PLUS_CMUX;
+    cmd.params.ptr_set_plus_cmux=&cmux;
+
+    cmux.mode=(T_BAT_plus_cmux_mode)mode;
+    cmux.subset=(T_BAT_plus_cmux_subset)subset;
+    cmux.port_speed=(T_BAT_plus_cmux_port_speed)port_speed;
+    cmux.n1=(U16)N1;
+    cmux.t1=(U8)T1;
+    cmux.n2=(U8)N2;
+    cmux.t2=(U8)T2;
+    cmux.t3=(U8)T3;
+    cmux.k=(S16)k;
+
+    bat_send(ati_bat_get_client(srcId), &cmd);
+    return(ATI_EXCT);
+  }
+
+#else /* no FF_ATI_BAT */
+
+  ret = sAT_PlusCMUX((T_ACI_CMD_SRC)srcId,
+                     (UBYTE)mode,
+                     (UBYTE)subset,
+                     port_speed,
+                     (USHORT)N1,
+                     (UBYTE)T1,
+                     (UBYTE)N2,
+                     (UBYTE)T2,
+                     (UBYTE)T3);
+
+#endif /* no FF_ATI_BAT */
+
+#endif /* DTI */
+
+  if( ret EQ AT_FAIL )
+  {
+    cmdCmeError(CME_ERR_Unknown);
+    return ATI_FAIL;
+  }
+  return ATI_CMPL_NO_OUTPUT;
+}
+
+GLOBAL T_ATI_RSLT tesatPlusCMUX (char *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("tesatPlusCMUX()");
+
+  sprintf(g_sa,"+CMUX: %s","(1),(0),(1-5),(10-100),(1-255),(0-100),(2-255),(1-255),(1-7)");
+  io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+
+  io_sendConfirm(srcId, cmdAtError(atOk), ATI_NORMAL_OUTPUT);
+
+  cmdErrStr = NULL;
+
+  return ATI_CMPL_NO_OUTPUT;
+}
+
+GLOBAL T_ATI_RSLT queatPlusCMUX (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN ret  = AT_FAIL;
+  UBYTE mode;
+  UBYTE subset;
+  UBYTE port_speed;
+  USHORT N1;
+  UBYTE T1;
+  UBYTE N2;
+  UBYTE T2;
+  UBYTE T3;
+  SHORT k = 2;
+
+  TRACE_FUNCTION("queatPlusCMUX()");
+
+#ifdef FF_ATI_BAT
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_no_parameter dummy;
+
+    cmd.ctrl_params = BAT_CMD_QUE_PLUS_CMUX;
+    dummy.bat_dummy = 0xFF;
+    cmd.params.ptr_que_plus_cmux = &dummy;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+    return(ATI_EXCT);
+  } 
+#else /* no FF_ATI_BAT */
+
+#ifdef DTI
+  ret = qAT_PlusCMUX((T_ACI_CMD_SRC)srcId,
+                    &mode,
+                    &subset,
+                    &port_speed,
+                    &N1,
+                    &T1,
+                    &N2,
+                    &T2,
+                    &T3);
+  if (ret EQ AT_CMPL)
+  {
+    sprintf(g_sa,"+CMUX: %d,%d,%d,%d,%d,%d,%d,%d,%d", mode, subset, port_speed, N1, T1, N2, T2, T3, k);
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+  else if (ret EQ AT_FAIL)
+  {
+    cmdCmeError(CME_ERR_Unknown);
+  }
+#endif /* DTI */
+  return ATI_FAIL;
+
+#endif /* no FF_ATI_BAT */
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusIPR          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +IPR command (DTE speed setting)
+*/
+
+GLOBAL T_ATI_RSLT setatPlusIPR(char *cl, UBYTE srcId)
+{
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+  T_ACI_BD_RATE     speed;
+  char *end;
+
+  src_params->curAtCmd = AT_CMD_IPR;
+
+  switch ( strtol(cl, &end, 10) )
+  {
+    case 0:       speed = BD_RATE_AUTO;   break;
+    case 75:      speed = BD_RATE_75;     break;
+    case 150:     speed = BD_RATE_150;    break;
+    case 300:     speed = BD_RATE_300;    break;
+    case 600:     speed = BD_RATE_600;    break;
+    case 1200:    speed = BD_RATE_1200;   break;
+    case 2400:    speed = BD_RATE_2400;   break;
+    case 4800:    speed = BD_RATE_4800;   break;
+    case 7200:    speed = BD_RATE_7200;   break;
+    case 9600:    speed = BD_RATE_9600;   break;
+    case 14400:   speed = BD_RATE_14400;  break;
+    case 19200:   speed = BD_RATE_19200;  break;
+    case 28800:   speed = BD_RATE_28800;  break;
+    case 33900:   speed = BD_RATE_33900;  break;
+    case 38400:   speed = BD_RATE_38400;  break;
+    case 57600:   speed = BD_RATE_57600;  break;
+    case 115200:  speed = BD_RATE_115200; break;
+    case 203125:  speed = BD_RATE_203125; break;
+    case 406250:  speed = BD_RATE_406250; break;
+    case 812500:  speed = BD_RATE_812500; break;
+    default:
+      cmdCmeError(CME_ERR_OpNotSupp);
+      return ATI_FAIL;
+  }
+
+#ifdef FF_ATI_BAT
+  {
+  T_BAT_cmd_send cmd;
+  T_BAT_cmd_set_plus_ipr my_bat_set_plus_ipr;
+
+  TRACE_FUNCTION("setatPlusIPR() calls bat_send() <=== as APPLICATION");
+
+  memset(&my_bat_set_plus_ipr, 0, sizeof(my_bat_set_plus_ipr));
+  cmd.ctrl_params = BAT_CMD_SET_PLUS_IPR;
+  cmd.params.ptr_set_plus_ipr = &my_bat_set_plus_ipr;
+
+  my_bat_set_plus_ipr.rate = (T_BAT_plus_ipr_rate)speed;
+
+  bat_send(ati_bat_get_client(srcId), &cmd);
+
+  return ATI_EXCT; /* executing, because response is passed by callback function */
+  }
+#else /* OLD FUNCTION BODY */
+
+  TRACE_FUNCTION("setatPlusIPR()");
+
+#ifdef UART
+
+  if(!end)
+  {
+    cmdCmeError(CME_ERR_OpNotSupp);
+    return ATI_FAIL;
+  }
+
+  switch ( sAT_PlusIPR((T_ACI_CMD_SRC)srcId, speed) )
+  {
+    case (AT_CMPL):                    /* operation completed */
+      return ATI_CMPL_NO_OUTPUT;       /* OK was already sent at old baudrate by sAT_PlusIPR,
+                                         so must not be sent twice! */
+    default:
+      cmdCmeError(CME_ERR_NotPresent);
+      return ATI_FAIL;
+  }
+#else
+  cmdCmeError(CME_ERR_NotPresent); 
+  return ATI_FAIL;
+
+#endif /* UART */
+
+#endif /* no FF_ATI_BAT*/
+}
+
+GLOBAL T_ATI_RSLT queatPlusIPR(char *cl, UBYTE srcId)
+{
+  T_ACI_BD_RATE rate;
+  int rate_value;
+
+  TRACE_FUNCTION("queatPlusIPR()");
+#ifdef DTI
+  if ( AT_CMPL EQ qAT_PlusIPR((T_ACI_CMD_SRC)srcId, &rate) )
+  {
+    switch ( rate )
+    {
+      case BD_RATE_AUTO:   rate_value = 0;      break;
+      case BD_RATE_75:     rate_value = 75;     break;
+      case BD_RATE_150:    rate_value = 150;    break;
+      case BD_RATE_300:    rate_value = 300;    break;
+      case BD_RATE_600:    rate_value = 600;    break;
+      case BD_RATE_1200:   rate_value = 1200;   break;
+      case BD_RATE_2400:   rate_value = 2400;   break;
+      case BD_RATE_4800:   rate_value = 4800;   break;
+      case BD_RATE_7200:   rate_value = 7200;   break;
+      case BD_RATE_9600:   rate_value = 9600;   break;
+      case BD_RATE_14400:  rate_value = 14400;  break;
+      case BD_RATE_19200:  rate_value = 19200;  break;
+      case BD_RATE_28800:  rate_value = 28800;  break;
+      case BD_RATE_33900:  rate_value = 33900;  break;
+      case BD_RATE_38400:  rate_value = 38400;  break;
+      case BD_RATE_57600:  rate_value = 57600;  break;
+      case BD_RATE_115200: rate_value = 115200; break;
+      case BD_RATE_203125: rate_value = 203125; break;
+      case BD_RATE_406250: rate_value = 406250; break;
+      case BD_RATE_812500: rate_value = 812500; break;
+      default:             rate_value = 0;      break;
+    }
+
+    sprintf(g_sa,"+IPR: %d", rate_value);
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+#endif
+  cmdAtError(atError);
+  return(ATI_FAIL);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusICF          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +ICF command (DTE character frame setting)
+*/
+
+GLOBAL T_ATI_RSLT setatPlusICF(char *cl, UBYTE srcId)
+{
+  T_ACI_BS_FRM      format     = BS_FRM_NotPresent;
+  T_ACI_BS_PAR      parity     = BS_PAR_NotPresent;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("setatPlusICF()");
+
+  cl=parse(cl,"dd",&format,&parity);
+
+  if(!cl)
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+#ifdef DTI
+
+#ifdef FF_ATI_BAT
+
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_cmd_set_plus_icf icf;
+
+    cmd.ctrl_params=BAT_CMD_SET_PLUS_ICF;
+    cmd.params.ptr_set_plus_icf=&icf;
+
+    /*
+    *   This relies on T_ACI_BS_FRM being identical to
+    *   T_BAT_framing_format and T_ACI_BS_PAR being identical
+    *   to T_BAT_framing_parity.
+    */
+    icf.framing_format=(T_BAT_framing_format)format;
+    icf.framing_parity=(T_BAT_framing_parity)parity;
+
+    bat_send(ati_bat_get_client(srcId), &cmd);
+  } 
+
+  src_params->curAtCmd=AT_CMD_ICF;
+
+  return(ATI_EXCT);
+
+#else /* no FF_ATI_BAT */
+
+  switch ( sAT_PlusICF((T_ACI_CMD_SRC)srcId, format, parity) )
+  {
+  case (AT_CMPL):                         /*operation completed*/
+    return ATI_CMPL;
+  case (AT_EXCT):
+    src_params->curAtCmd = AT_CMD_ICF;
+    return ATI_EXCT;
+  default:
+    cmdAtError(atError);                  /*Command failed*/
+    return ATI_FAIL;
+  }
+
+#endif /* no FF_ATI_BAT */
+
+#else
+    cmdAtError(atError);                  /*Command failed*/
+    return ATI_FAIL;
+#endif
+}
+
+GLOBAL T_ATI_RSLT queatPlusICF(char *cl, UBYTE srcId)
+{
+#ifndef FF_ATI_BAT
+  T_ACI_BS_FRM  format;
+  T_ACI_BS_PAR  parity;
+#endif
+
+  TRACE_FUNCTION("queatPlusICF()");
+
+#ifdef DTI
+
+#ifdef FF_ATI_BAT
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_no_parameter dummy;
+
+    cmd.ctrl_params = BAT_CMD_QUE_PLUS_ICF;
+    dummy.bat_dummy = 0xFF;
+    cmd.params.ptr_que_plus_icf = &dummy;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+    return(ATI_EXCT);
+  } 
+#else /* no FF_ATI_BAT */
+
+  switch ( qAT_PlusICF((T_ACI_CMD_SRC)srcId,&format,&parity) )
+  {
+    case AT_CMPL:
+      if (format EQ BS_FRM_Dat8_Par1_St1 OR format EQ BS_FRM_Dat7_Par1_St1 )
+      {
+        resp_disp(srcId, cl,"ee",&format,&parity);
+      }
+      else
+      {
+        resp_disp(srcId, cl,"e",&format);
+      }
+    return ATI_CMPL;
+  }
+
+#endif /* no FF_ATI_BAT */
+
+#endif /* DTI */
+  cmdAtError(atError);
+  return ATI_FAIL;
+}
+
+GLOBAL T_ATI_RSLT setflowCntr(CHAR* cl, UBYTE srcId)
+{
+  T_ACI_RX_FLOW_CTRL DCE_by_DTE = RX_FLOW_NotPresent;  /* by TE: Rx flow control */
+  T_ACI_RX_FLOW_CTRL DTE_by_DCE = RX_FLOW_NotPresent;  /* by TA: Tx flow control */
+
+  cl = parse (cl,"dd",&DCE_by_DTE,&DTE_by_DCE);
+
+  if(!cl)
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+
+#ifdef DTI
+  switch ( sAT_PlusIFC((T_ACI_CMD_SRC)srcId, DCE_by_DTE, DTE_by_DCE) )
+  {
+  case (AT_CMPL):                         /*operation completed*/
+    return ATI_CMPL;
+  case (AT_EXCT):
+    /* ATTENTION: no setting of 'curAtCmd' allowed because the value is set before */
+    return ATI_EXCT;
+  default:
+    cmdAtError(atError);                  /*Command failed*/
+    return ATI_FAIL;
+  }
+#else
+  cmdAtError(atError);                  /*Command failed*/
+  return ATI_FAIL;
+#endif
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusIFC          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +IFC command (DTE DCE / DCE DTE flow control)
+*/
+
+GLOBAL T_ATI_RSLT setatPlusIFC(char *cl, UBYTE srcId)
+{
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+  TRACE_FUNCTION("setatPlusIFC()");
+
+  src_params->curAtCmd = AT_CMD_IFC;
+  return setflowCntr(cl, srcId);
+}
+
+
+GLOBAL T_ATI_RSLT queflowCntr(CHAR* cl, UBYTE srcId)
+{
+  T_ACI_RX_FLOW_CTRL DCE_by_DTE;
+  T_ACI_RX_FLOW_CTRL DTE_by_DCE;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+#ifdef DTI
+  if ( AT_CMPL EQ qAT_PlusIFC((T_ACI_CMD_SRC)srcId,&DCE_by_DTE,&DTE_by_DCE) )
+  {
+#ifdef FF_FAX
+    if (src_params->curAtCmd EQ AT_CMD_FLO)
+    {
+      sprintf(g_sa,"+FLO: %d",DCE_by_DTE);
+    }
+    else
+#endif
+    if (src_params->curAtCmd EQ AT_CMD_IFC)
+    {
+      sprintf(g_sa,"+IFC: %d,%d",DCE_by_DTE,DTE_by_DCE);
+    }
+
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    return ATI_CMPL;
+  }
+  else
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+#else
+  cmdAtError(atError);
+  return ATI_FAIL;
+#endif
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusIFC          |
++--------------------------------------------------------------------+
+
+  PURPOSE : +IFC command (DTE DCE / DCE DTE flow control)
+*/
+
+GLOBAL T_ATI_RSLT queatPlusIFC(char *cl, UBYTE srcId)
+{
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+  TRACE_FUNCTION("queatPlusIFC()");
+
+  src_params->curAtCmd = AT_CMD_IFC;
+  return queflowCntr(cl, srcId);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusILRR         |
++--------------------------------------------------------------------+
+
+  PURPOSE : +ILRR command (display +ILRR setting)
+*/
+
+GLOBAL T_ATI_RSLT setatPlusILRR(char *cl, UBYTE srcId)
+{
+  SHORT val=-1;
+
+  TRACE_FUNCTION("setatPLusILRR()");
+
+  cl = parse (cl,"r",&val);
+  if(!cl OR val > 1 OR val < 0)
+  {
+    cmdAtError(atError);
+    return ATI_FAIL;
+  }
+  ati_user_output_cfg[srcId].ILRR_stat=(UBYTE)val;
+  return ATI_CMPL;
+}
+
+GLOBAL T_ATI_RSLT queatPlusILRR(char *cl, UBYTE srcId)
+{
+  TRACE_FUNCTION("queatPLusILRR()");
+
+  resp_disp(srcId, cl,"b",&ati_user_output_cfg[srcId].ILRR_stat);
+  return ATI_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT :                              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : setatPlusCCLK      |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CCLK command (Set the real time clock of the MT)
+*/
+GLOBAL T_ATI_RSLT setatPlusCCLK (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN        ret = AT_FAIL;
+  T_ACI_RTC_DATE    date_s;
+  T_ACI_RTC_TIME    time_s;
+  char  date_time_string[DATE_TIME_LENGTH+1]={0};
+  int items_conv = 0;
+  U8  days = 0, months = 0;
+  U8  hrs = 0, mins = 0, secs = 0;
+  U8  years = 0;
+  U8 tz = 0; /* to parse timezone from date_time_string */
+  SHORT timeZone = 0;
+  char sign = '+';
+  
+  TRACE_FUNCTION("setatPlusCCLK()");
+
+  cl=parse(cl,"s", DATE_TIME_LENGTH, date_time_string);
+
+  /* Expected format: yy/MM/dd,hh:mm:ss+zz (20 bytes). DATE_TIME_LENGTH(22 bytes)
+   * allows length for yyyy/MM/dd,hh:mm:ss+zz */
+  if(!cl OR strlen(date_time_string) NEQ DATE_TIME_LENGTH-2)
+  {
+    cmdCmeError(CME_ERR_OpNotAllow);
+    return (ATI_FAIL);
+  }
+
+    TRACE_EVENT_P1("Date and time are: %s",date_time_string);
+  items_conv = parseTimeStamp( date_time_string, &years,&months,&days,&hrs,&mins,&secs,&sign,&tz);
+
+  timeZone = tz;
+
+  if (sign EQ '-')
+  {
+    timeZone = timeZone * (-1);
+  }
+
+     TRACE_EVENT_P1("items_conv %d",items_conv);
+     TRACE_EVENT_P1("days %d",days);
+     TRACE_EVENT_P1("months %d",months);
+     TRACE_EVENT_P1("years %d",years);
+     TRACE_EVENT_P1("hours %d",hrs);
+     TRACE_EVENT_P1("mins %d",mins);
+     TRACE_EVENT_P1("secs %d",secs);
+     TRACE_EVENT_P1("sign %c",sign);
+     TRACE_EVENT_P1("timeZone %d",timeZone);
+
+
+/* If 8 data items not extracted from date_time_string then date_time_string data with TZ info is incorrect. */
+  if ( items_conv NEQ MAX_TIME_STAMP_FIELDS )
+      {
+        cmdCmeError(CME_ERR_OpNotAllow);
+        return (ATI_FAIL);
+      }
+
+#ifndef _SIMULATION_
+/* Ensure 'years' passed in from the AT command is not in 4 digit format
+   The spec requires the years to be passed in in 2 digit format 
+   Also ensure the sign char is either a '+' or '-' */
+if ( (years > 99 )   OR
+    ((sign NEQ '-')     AND (sign NEQ '+')) OR
+     ( timeZone < (-48)) OR (timeZone > 48)
+   )
+   {
+        cmdCmeError(CME_ERR_OpNotAllow);
+        return (ATI_FAIL);
+   }    
+#else /* _SIMULATION_ */
+/* On the target code these checks are done in the RTC code. In the simulation code- 
+    the RTC routines are not used so these checks have to be done. */
+if  ( (years  < 0)  OR (years  > 99)
+   OR (months < 1)  OR (months > 12)
+   OR (days   < 1)  OR (days   > 31)
+   OR (hrs    < 0)  OR (hrs    > 23)
+   OR (mins   < 0)  OR (mins   > 59)
+   OR (secs   < 0)  OR (secs   > 59)
+   OR (timeZone < (-48)) OR (timeZone > 48) 
+    )
+      {
+        cmdCmeError(CME_ERR_OpNotAllow);
+        return (ATI_FAIL);
+      }
+#endif /* _SIMULATION_ */
+
+
+     /* Populate date time structs */ 
+     date_s.day = days;
+     date_s.month = months;
+     date_s.year = years + 2000;    /* Convert years to 4 digit format for passing to lower layer RTC function */
+     time_s.hour = hrs;
+     time_s.minute = mins;
+     time_s.PM_flag = 0;
+     time_s.second = secs;
+     time_s.format = TIME_FORMAT_24HOUR; 
+     
+  /* Pass separated date and time and timezone info to set the clock */
+
+#ifdef FF_ATI_BAT
+
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_cmd_set_plus_cclk cclk;
+
+    cmd.ctrl_params=BAT_CMD_SET_PLUS_CCLK;
+    cmd.params.ptr_set_plus_cclk=&cclk;
+
+    cclk.year=(U8)date_s.year;
+    cclk.month=(U8)date_s.month;
+    cclk.day=(U8)date_s.day;
+
+    cclk.hour=(U8)time_s.hour;
+
+    cclk.minutes=(U8)time_s.minute;
+    cclk.seconds=(U8)time_s.second;
+
+    cclk.time_zone=(S8)timeZone;
+
+    bat_send(ati_bat_get_client(srcId), &cmd);
+  } 
+
+  return(ATI_EXCT);
+
+#else /* no FF_ATI_BAT */
+
+     ret = sAT_PlusCCLK ( (T_ACI_CMD_SRC)srcId,  &date_s,  &time_s, timeZone);
+
+    TRACE_EVENT_P1("sAT_PlusCCLK ret = %d", ret);
+
+/* Deal with return value */
+
+  switch (ret)
+  {
+    case (AT_CMPL):                                       /*operation completed*/
+      break;
+
+    default:
+      cmdCmeError(CME_ERR_Unknown);         /*Command failed*/
+      break;
+  }
+  return (map_aci_2_ati_rslt(ret)); 
+
+#endif /* no FF_ATI_BAT */
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT :                              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : queatPlusCCLK      |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CCLK query command (Read the real time clock of the MT)
+*/
+GLOBAL T_ATI_RSLT queatPlusCCLK (char *cl, UBYTE srcId)
+{
+#ifndef FF_ATI_BAT
+  T_ACI_RETURN ret = AT_FAIL;
+  T_ACI_RTC_DATE date_s;     /* Structures to obtain date time info */
+  T_ACI_RTC_TIME time_s;
+  UBYTE days, months;
+  UBYTE hrs, mins, secs;
+  USHORT years;
+#if defined FF_TIMEZONE OR defined _SIMULATION_
+  char sign ;
+#endif /* defined FF_TIMEZONE OR defined _SIMULATION_ */
+  int tz ;
+  char *me="+CCLK: ";
+#endif
+ 
+    
+  TRACE_FUNCTION("queatPlusCCLK()");
+
+#ifdef FF_ATI_BAT
+  {
+    T_BAT_cmd_send cmd;
+    T_BAT_no_parameter dummy;
+
+    cmd.ctrl_params=BAT_CMD_QUE_PLUS_CCLK;
+    dummy.bat_dummy = 0xFF;
+    cmd.params.ptr_que_plus_cclk = &dummy;
+    bat_send(ati_bat_get_client(srcId), &cmd);
+    return(ATI_EXCT);
+  } 
+#else /* no FF_ATI_BAT */
+
+  ret = qAT_PlusCCLK( (T_ACI_CMD_SRC)srcId, &date_s, &time_s, &tz);
+
+  if (ret EQ AT_CMPL)
+  {
+    /* Command  completed successfully */
+    /* convert  time date struct data into string */ 
+    days =  date_s.day;
+    months =  date_s.month;
+    years =  date_s.year;
+    hrs =  time_s.hour;
+    mins =  time_s.minute;
+    secs =  time_s.second;
+
+#ifndef _SIMULATION_
+#ifdef FF_TIMEZONE
+  if ( tz < 0)
+  {
+    sign = '-';
+    tz = tz * (-1);
+  }
+  else
+    sign = '+';
+#endif /* FF_TIMEZONE */
+#else /* _SIMULATION_ */
+    sign = '-';
+    tz = tz * (-1);
+#endif /* _SIMULATION_ */
+
+ /* Convert years to 2 digit format for reporting back to user */
+    years = years - 2000;      /* Subtract 2000 years from number returned */
+
+    TRACE_EVENT_P3("Date -> %d - %d - %d",days,months,years);
+    TRACE_EVENT_P3("Time -> %d - %d - %d",hrs,mins,secs);
+    /* Not using  time_s.format or time_s.PM_flag */ 
+  
+    /* CONVERT DATE TIME INFO INTO STRING FOR OUTPUTTING BACK TO DISPLAY */
+
+#ifndef _SIMULATION_
+
+#ifndef FF_TIMEZONE
+    sprintf(g_sa, "%s\"%d/%d/%d,%d:%d:%d\"", me, years, months, days, hrs, mins, secs);
+#else /* FF_TIMEZONE */
+    TRACE_EVENT_P2("TimeZone -> %c%d", sign, tz);
+    sprintf(g_sa, "%s\"%d/%d/%d,%d:%d:%d%c%d\"", me, years, months, days, hrs, mins, secs, sign, tz);
+#endif /* FF_TIMEZONE */
+
+#else /* _SIMULATION_ */
+    TRACE_EVENT_P2("TimeZone -> %c%d", sign, tz);
+    sprintf(g_sa, "%s\"%d/%d/%d,%d:%d:%d%c%d\"", me, years, months, days, hrs, mins, secs, sign, tz);
+#endif /* _SIMULATION_ */
+
+    /* REPORT DATE TIME INFO STRING */   
+    io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
+    
+    return ATI_CMPL;
+  }
+  else
+  {
+    cmdCmeError(CME_ERR_Unknown);
+    return ATI_FAIL;
+  }  
+
+#endif /* no FF_ATI_BAT */
+
+}
+#endif /* ATI_BAS_C */
+
+