view src/cs/layer1/hmacs/macs_def.h @ 174:097e25b925a2
doc/Compiling: gtm900 target added
author
Mychaela Falconia <falcon@freecalypso.org>
date
Wed, 19 Jun 2019 06:15:56 +0000 (2019-06-19)
parents
b6a5e36de839
children
line source
+ − /************* Revision Control System Header *************
+ − * GSM Layer 1 software
+ − * MACS_DEF.H
+ − *
+ − * Filename macs_def.h
+ − * Copyright 2003 (C) Texas Instruments
+ − *
+ − ************* Revision Control System Header *************/
+ −
+ − /*********************************************************/
+ − /* Type definition for MAC-S static variables */
+ − /*********************************************************/
+ −
+ − /*---------------------------------------------------*/
+ − /* MAC-S static parameters */
+ − /*---------------------------------------------------*/
+ −
+ − typedef struct {
+ −
+ − /* General TBF parameters processed by MAC-S */
+ − /*********************************************/
+ − UWORD8 old_synchro_ts; // Synchro timeslot when data was received on the slots indicated in last_rx_allocation
+ −
+ − // Dynamic allocation mode parameters
+ − UWORD8 first_monitored_ts; // First Tx slot allocated by the network
+ − UWORD8 last_monitored_ts; // Last Tx slot allocated by the network
+ −
+ − // Fixed allocation mode parameters
+ − UWORD8 dl_ctrl_ts_mask; // Mask used to verify if conditions are met to map the downlink control timeslot
+ − UWORD32 sti_block_id; // Block ID of the starting time
+ −
+ − /* Ressources allocated by MAC-S */
+ − /*********************************************/
+ − UWORD8 rx_allocation; // Slots allocated for downlink blocks reception
+ − UWORD8 tx_allocation; // Slots allocated for uplink blocks transmission
+ − UWORD8 tx_data; // Slots allocated for uplink data block transfer only
+ − UWORD8 tx_prach_allocation; // Slots allocated for poll response in PRACH burst format
+ − UWORD8 pwr_allocation; // Slots allocated for power measurements
+ − UWORD8 last_rx_alloc; // Downlink resources allocated during the last block period
+ −
+ − /* MAC-S global parameters */
+ − /***************************/
+ − UWORD32 rx_blk_period; // Set to BLOCK_ID if DL blocks were received, FFFFFFFF if no DL blocks
+ − UWORD8 rlc_blocks_sent; // Last sent uplink RLC/MAC block ID
+ − UWORD8 rx_no; // Number of received blocks to report to RLC
+ − UWORD8 last_poll_response; // Status of the poll responses requested by RLC the block period before
+ − UWORD8 ul_buffer_index[8]; // UL buffer index table loaded after RLC UL allocation check
+ −
+ − // Dynamic allocation mode parameters
+ − UWORD8 usf_vote_enable; // This bitmap is used to set on which timeslot the DSP USF vote must be enabled
+ − UWORD8 usf_good; // Bit set to 1 corresponds to invalid or valid and good USF values
+ − UWORD32 next_usf_mon_block[2]; // For each uplink block, memorize the next block_id when the USF will be monitored
+ − // Note: for type 1 MS, max. 2 Tx can be done !!!
+ −
+ − // Fixed allocation mode parameters
+ − UWORD8 tra_gap; // Number of free Tx slots at the end of the frame
+ − BOOL fix_alloc_exhaust; // Set to 1 if the fixed allocation bitmap has exhausted
+ −
+ − #if MACS_STATUS
+ − BOOL bcch_monitoring; // When MAC-S calls RLC, set to TRUE if BCCH monitoring was done during the frame before
+ − #endif
+ −
+ − } T_MACS_STATIC;
+ −
+ − /*---------------------------------------------------*/
+ − /* MS Class parameters */
+ − /*---------------------------------------------------*/
+ −
+ − typedef struct {
+ − UWORD8 rx;
+ − UWORD8 tx;
+ − UWORD8 sum;
+ − UWORD8 tta;
+ − UWORD8 ttb;
+ − UWORD8 tra;
+ − UWORD8 trb;
+ − } T_MSCLASS_PARAMETERS;