FreeCalypso > hg > fc-selenite
view src/cs/drivers/drv_app/kpd/kpd_cfg.h @ 193:6a53de2c4fc2
R2D sync with Magnetite
R2D is never compiled in Selenite, thus the present change has absolutely
no impact on anything - but this sync is being done in order to keep the
overall diff between Magnetite and Selenite to a minimum.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 23 May 2020 07:13:36 +0000 |
parents | b6a5e36de839 |
children |
line wrap: on
line source
/** * @file kpd_cfg.h * * Configuration file for keypad driver. * * This file is part of the keypad API. * * @author Laurent Sollier (l-sollier@ti.com) * @version 0.1 */ /* * History: * * Date Author Modification * ---------------------------------------- * 10/11/2001 L Sollier Create * * * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef _KPD_CFG_H_ #define _KPD_CFG_H_ #ifndef _WINDOWS #include "config/board.cfg" #include "config/chipset.cfg" #endif /** Define the number of physical keys on the keypad (including PWR key). */ #if (BOARD == 7) || (BOARD == 8) || (BOARD == 9) #define KPD_NB_PHYSICAL_KEYS (18) #elif (BOARD == 40) || (BOARD == 41) || (BOARD == 42) || (BOARD == 43) || (BOARD == 34) || (BOARD == 35) || (defined _WINDOWS) #define KPD_NB_PHYSICAL_KEYS (24) #endif #if (CHIPSET == 12) #define SetGroupBits16(registre,position,number,value) {\ UINT16 tmp=registre;\ volatile UINT16 tmpvalue;\ tmpvalue = (value<<(16-(number)));\ tmpvalue = (tmpvalue>>(16-(number)));\ tmp&=~((0xFFFF>>(16-(number)))<<(position));\ tmp|=((tmpvalue&(0xFFFF>>(16-(number))))<<(position));\ registre=tmp;\ } /** Types Definitions */ /** T_KPD_Nsoftware_mode : Keyboard Enable Software Mode Type */ typedef enum { SOFTWARE_MODE_ENABLE = 0, HARDWARE_DECODING = 1 } T_KPD_Nsoftware_mode; /** T_KPD_PTV : Divisor factor */ typedef enum { KPD_CLK_DIV2 = 0, KPD_CLK_DIV4 = 1, KPD_CLK_DIV8 = 2, KPD_CLK_DIV16 = 3, KPD_CLK_DIV32 = 4, KPD_CLK_DIV64 = 5, KPD_CLK_DIV128 = 6, KPD_CLK_DIV256 = 7 } T_KPD_PTV; /** T_KPD_EnableDetection : Keyboard Detection Enable Type */ typedef enum { KPD_DETECTION_ENABLED = 1, KPD_DETECTION_DISABLED = 0 } T_KPD_EnableDetection; /** T_KPD_Status : Keyboard State Machine Status Type */ typedef enum { KPD_IDLE = 0x0, KPD_SCANNING = 0x1, KPD_LOAD_TIMER_DEBOUNCING = 0x2, KPD_TEST_TIMER_DEBOUNCING = 0x3, KPD_GEN_IT_EVENT = 0x4, KPD_GEN_IT_KEY_AND_EVENT = 0x5, KPD_LOAD_TIMER_LONG_KEY = 0x6, KPD_TEST_TIMER_LONG_KEY = 0x7, KPD_GEN_IT_LONG_KEY = 0x8, KPD_LOAD_TIMER_TIME_OUT = 0x9, KPD_TEST_TIMER_TIME_OUT = 0xA, KPD_GEN_IT_TIME_OUT = 0xB, KPD_LOAD_TIMER_REPEAT_KEY = 0xC, KPD_TEST_TIMER_REPEAT_KEY = 0xD, KPD_OTHER = 0xF } T_KPD_Status; #endif /** Define the number max of client that can subscribe to the keypad driver. * This value must be lower or equal than 32. */ #define KPD_MAX_SUBSCRIBER (4) /** Define the number of available mode. This value must be greater or equal to 2 * because default and alphanumeric mode must always be defined. * (This value define the size of kpd_vpm_table array). */ #define KPD_NB_MODE (3) /** Define the configurable mode value. This value must be defined with the enumerated * type T_KPD_MODE. If KPD_MODE_CONFIG is not defined, the configurable mode is not supported. */ #define KPD_MODE_CONFIG (KPD_GAME_MODE) /** Base value for memory bank size, can be increased for customer needs. */ #define KPD_MB_BASE_SIZE (100) /** * @var T_KPD_MODE * Enumerated type that defines all the available modes. * The mandatory default mode are KPD_DEFAULT_MODE and KPD_ALPHANUMERIC_MODE. * Some others mode can be added by the customer (Update KPD_NB_MODE value). * Values must be consecutive. KPD_DEFAULT_MODE and KPD_ALPHANUMERIC_MODE must always * be respectively equal to 1 and 2. */ typedef enum { KPD_DEFAULT_MODE = 1, KPD_ALPHANUMERIC_MODE = 2, KPD_GAME_MODE = 3 } T_KPD_MODE; /** * Definition of all the virtual key ID. All Id's must be distinct. */ /* KPD_KEY_NULL must always be defined */ /* KPD_KEY_NULL is not a key that can be notified to a subscriber */ #define KPD_KEY_NULL (0) #define KPD_KEY_0 (1) #define KPD_KEY_1 (2) #define KPD_KEY_2 (3) #define KPD_KEY_3 (4) #define KPD_KEY_4 (5) #define KPD_KEY_5 (6) #define KPD_KEY_6 (7) #define KPD_KEY_7 (8) #define KPD_KEY_8 (9) #define KPD_KEY_9 (10) #define KPD_KEY_UP (11) #define KPD_KEY_DOWN (12) #define KPD_KEY_SOFT_LEFT (13) #define KPD_KEY_SOFT_RIGHT (14) #define KPD_KEY_CONNECT (15) #define KPD_KEY_DISCONNECT (16) #define KPD_KEY_STAR (17) #define KPD_KEY_DIESE (18) #define KPD_KEY_VOL_UP (19) #define KPD_KEY_VOL_DOWN (20) #define KPD_KEY_LEFT (21) #define KPD_KEY_RIGHT (22) #define KPD_KEY_ENTER (23) #define KPD_KEY_RECORD (24) /* This virtual key is defined for Condat callback when Power key is pressed until new interface is defined with Condat */ #define KPD_PWR (25) #define KPD_KEY_ABC (30) #define KPD_KEY_DEF (31) #define KPD_KEY_GHI (32) #define KPD_KEY_JKL (33) #define KPD_KEY_MNO (34) #define KPD_KEY_PQR (35) #define KPD_KEY_ST (36) #define KPD_KEY_UV (37) #define KPD_KEY_WX (38) #define KPD_KEY_YZ (39) #endif /* _KPD_CFG_H_ */