FreeCalypso > hg > fc-selenite
view doc/Toolchain-setup-gcc @ 158:8fe0cde2fd79
doc/Compiling: update for SE J100 target and fc-host-tools-r10
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 17 Mar 2019 07:20:28 +0000 |
parents | cdbe920fd725 |
children |
line wrap: on
line source
Building and installing the ARM7 toolchain ========================================== Before you can compile FC Selenite with gcc, you first need to build and install the necessary toolchain targeting ARM7, the CPU core in the Calypso. The current "official" GNU ARM toolchain for FreeCalypso consists of binutils-2.21.1, gcc-4.5.4 and newlib-2.0.0 with a specific set of patches and build configuration options. All of the necessary bits can be downloaded here: ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/toolchain/ Please note: the toolchain that is prescribed for FreeCalypso as above is *believed* to be equivalent to the one that was once used by OsmocomBB, but there are no guarantees. Use any other toolchain at your own risk. There is also a prebuilt toolchain put together by FreeCalypso community contributor Das Signal: https://www.freecalypso.org/members/ds/fc-gnu-arm-i386-2.tgz https://www.freecalypso.org/members/ds/fc-gnu-arm-x86_64-2.tgz