FreeCalypso > hg > fc-selenite
view src/cs/drivers/drv_app/r2d/lcds/luna/r2d_luna_lcd.h @ 194:a18bf8df5fab
aci_pei.c: sync with Magnetite for (MMI != 0)
There was a change in Magnetite aci3 for (MMI != 0) configuration;
this config does not exist in Selenite, but this change is being
pulled in as a sync in order to keep the diff between Magnetite
and Selenite to a minimum.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 23 May 2020 07:21:43 +0000 |
| parents | 6a53de2c4fc2 |
| children |
line wrap: on
line source
/* * This header file provides definitions for the Luna LCD hardware interface. */ /* reset control */ #define CNTL_RST_REG (*(volatile unsigned short *)0xFFFFFD04) #define EXT_RESET 0x0004 /* the LCD is connected to Calypso nCS3, with A1 line as register select */ #define LCD_IR (*(volatile unsigned short *)0x02000000) #define LCD_DR (*(volatile unsigned short *)0x02000002) /* macro for writing first IR, then DR */ #define LCD_REG_WR(reg, data) {LCD_IR = (reg); LCD_DR = (data);}