FreeCalypso > hg > fc-selenite
view src/cs/layer1/p_include/l1p_deft.h @ 112:fdecfb3bd860
.../drv_app/r2d/r2d_*.c: LCD include case fixes from Magnetite
R2D is not used in Selenite, but we strive to keep the two source trees
in sync as much as possible to reduce the diffs.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Oct 2018 16:56:22 +0000 |
parents | b6a5e36de839 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_DEFTY.H * * Filename l1p_deft.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ typedef struct { WORD32 rand; UWORD16 channel_request_data; UWORD8 bs_prach_blks; UWORD8 prach_alloc; UWORD32 fn_to_report; } T_PRACH_INFO; typedef union { UWORD16 prach_data[12]; UWORD8 cs1_data[24]; } T_CHAN_REQ_DATA; typedef struct { UWORD8 pol_resp_type; T_CHAN_REQ_DATA chan_req; UWORD32 fn; UWORD8 timing_advance; UWORD32 fn_to_report; } T_POLL_INFO; typedef struct { UWORD8 data_array[23]; UWORD8 tn; UWORD8 dl_tn_to_restore; UWORD8 activity; } T_SINGLE_BLOCK; typedef struct { UWORD32 SignalCode; UWORD8 assignment_id; UWORD8 synchro_tn; UWORD8 allocated_tbf; UWORD8 dl_tbf_synchro_timeslot; UWORD8 ul_tbf_synchro_timeslot; UWORD8 transfer_synchro_timeslot; UWORD8 assignment_command; UWORD8 multislot_class; T_PACKET_TA packet_ta; T_DL_POWER_CTL dl_pwr_ctl; UWORD8 tsc; T_PACKET_FREQ_PARAM freq_param; UWORD8 mac_mode; T_TBF_STI tbf_sti; T_UL_RESSOURCE_ALLOC *ul_tbf_alloc; T_DL_RESSOURCE_ALLOC dl_tbf_alloc; BOOL interf_meas_enable; UWORD8 ts_override; BOOL pc_meas_chan; } T_TRANSFER_SET; typedef struct { UWORD8 ta_update_cmd; UWORD8 assignment_id; UWORD16 radio_freq; UWORD8 activity; BOOL request_dl; T_PACKET_TA packet_ta; } T_PTCCH_PARAM; typedef struct { UWORD8 tbf_release_cmd; UWORD8 released_tbf; } T_TBF_RELEASE_PARAM; typedef struct { UWORD8 pdch_release_cmd; UWORD8 timeslot_available; UWORD8 assignment_id; } T_PDCH_RELEASE_PARAM; typedef struct { UWORD8 assignment_id; UWORD8 txpwr[8]; BOOL crc_error; WORD8 bcch_level; UWORD16 radio_freq_tbl[4]; WORD8 burst_level[4]; } T_DL_PWR_CTRL; typedef struct { UWORD8 psi_param_update_cmd; UWORD8 Scell_pb; UWORD8 access_burst_type; } T_PSI_PARAM_UPDATE; typedef struct { BOOL semaphore; T_TRANSFER_SET *aset; T_TRANSFER_SET *fset[2]; T_TRANSFER_SET set[3]; T_UL_RESSOURCE_ALLOC ul_tbf_alloc[3]; T_SINGLE_BLOCK single_block; T_PTCCH_PARAM ptcch; T_TBF_RELEASE_PARAM tbf_release_param; T_PDCH_RELEASE_PARAM pdch_release_param; T_MPHP_REPEAT_UL_FIXED_ALLOC_REQ repeat_alloc; T_PSI_PARAM_UPDATE psi_param; T_DL_PWR_CTRL dl_pwr_ctrl; } T_TRANSFER_PARAM; /***************************************************************************************/ /* L1S packet global variable structure... */ /***************************************************************************************/ typedef struct { BOOL new_set; UWORD8 assignment_id; UWORD8 allocated_tbf; UWORD8 dl_tfi; UWORD8 ul_tfi; T_DL_POWER_CTL dl_pwr_ctl; BOOL pc_meas_chan; UWORD16 radio_freq_for_lna; } T_READ_PARAM; typedef struct { UWORD8 ILmin_beacon; UWORD8 ILmin_others[8]; // No power control AGC algorithm variables UWORD32 fn_select; BOOL phase; // Downlink power control mode B variables UWORD8 last_PR_good; // TBF Parameters used during the PDTCH read phase T_READ_PARAM read_param; // Flag used to know if the pc_meas_chan measurement has been controlled BOOL pc_meas_chan_ctrl; } T_L1PS_GLOBAL; /***********************************************************/ /* L1PA global variable structure... */ /***********************************************************/ typedef struct { // State for L1A state machines... //----------------------------------------- UWORD8 state[NBR_L1PA_PROCESSES]; // Measurement tasks management... //----------------------------------------- UWORD32 l1pa_en_meas[NBR_L1PA_PROCESSES]; } T_L1PA_GLOBAL; /*************************************************************/ /* Packet Idle mode tasks information... */ /*************************************************************/ /* must be filled according to Packet Idle parameters... */ /* ... */ /*************************************************************/ // Packet Idle Parameter description typedef struct { UWORD16 radio_freq; UWORD16 radio_freq_d; UWORD16 radio_freq_dd; } T_P_IDLE_PARAM; // Packet Paging description typedef struct { // -------- Packet Paging description -------------- UWORD8 bs_pag_blks_res; // BS_PAG_BLKS_RES parameter (cf. S921 specification) UWORD8 bs_pbcch_blks; // BS_PBCCH_BLKS parameter (cf. S921 specification) T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description UWORD8 nb_ppch_per_mf52;// Number of Packet PCCH per MF52 UWORD16 first_pg_grp; // First Paging Group index UWORD16 pg_blks_avail; // Number of Paging blocks available per MF52 UWORD16 pg_offset; // (IMSI mo 1000) div (KC*N) (Note N = 1 for PCCCH) UWORD16 split_pg_value; // Min(pg_blks_avail, split_pg_cycle) //-- BOOL epg_computation; // Packet Paging STATE used in Extended Paging scheduling UWORD16 pnp_period; // Paging Period = (52*64)/split_pg_value WORD16 time_to_pnp; // Time to next PPCH block position. } T_PCCCH_PARAM; typedef struct { BOOL change_synchro; BOOL control_offset; BOOL read_all_psi; UWORD8 nbr_psi; UWORD8 bs_pbcch_blks; UWORD8 psi1_repeat_period; UWORD8 relative_position_array[20]; // Array for Relative position UWORD16 offset_array[20]; // Array of offset computed from relative position T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description UWORD8 rel_pos_to_report; // Relative Position of the PBCCH block read and to // to report to L3. UWORD16 pbcch_period; // PBCCH period = MFL52 * psi1_repaet_period; UWORD8 tn_pbcch; // Time slot number relative for DSP point of view. } T_PBCCHS_PARAM; typedef struct { BOOL change_synchro; UWORD8 pb; UWORD8 bs_pbcch_blks; UWORD8 psi1_repeat_period; UWORD8 relative_position; // for Relative position UWORD16 offset; // offset computed from relative position T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description UWORD16 pbcch_period; // PBCCH period = MFL52 * psi1_repaet_period; UWORD16 bcch_carrier; // beacon of the neighbor cell (used by the DSP) WORD32 fn_offset; WORD32 time_alignmt; } T_PBCCHN_PARAM; typedef struct { BOOL dsp_r_page_switch_req; // If true, the dsp_r_page must be toggled in the interference measurement read UWORD8 multislot_class; // Mobile multislot class UWORD8 meas_bitmap; // Timeslots on which the interference measurements are done UWORD8 position; // Position on which measurements must be done (search or ptcch frame) UWORD8 idle_tn_rx; // Timeslot bitmap in packet idle with PCCCH on the frame before UWORD8 idle_tn_no_rx; // Timeslot bitmap in packet idle without PCCCH on the frame before UWORD16 radio_freq; // Radio freq. processed by l1s_hopping_algo() T_PACKET_FREQ_PARAM packet_intm_freq_param; // Frequency parameters } T_ITMEAS_PARAM; typedef struct { UWORD32 fn; // Absolute FN reported during the last measurement session UWORD8 rxlev[8]; // Buffer used to save the parameters reported to L3 UWORD8 meas_bitmap; // Interf meas bitmap. UWORD8 id; // Id. } T_L1A_INT_MEAS_PARAM; typedef struct { UWORD8 lna; // Input level result UWORD8 il; // LNA parameter } T_IL_LNA; typedef struct { UWORD8 next_to_ctrl; // Carrier for next power measurement result. UWORD8 next_to_read; // Next carrier to measure. UWORD8 pnp_ctrl; // Specify to l1s_meas_manager() that a PPCH burst has been ctrl. UWORD8 ms_ctrl; UWORD8 ms_ctrl_d; UWORD8 ms_ctrl_dd; T_IL_LNA used_il_lna[NB_MEAS_MAX_GPRS]; T_IL_LNA used_il_lna_d[NB_MEAS_MAX_GPRS]; T_IL_LNA used_il_lna_dd[NB_MEAS_MAX_GPRS]; } T_CR_FREQ_LIST; typedef struct { UWORD8 nb_carrier; UWORD16 freq_list[32+1]; UWORD8 list_id; } T_CRES_LIST_PARAM; typedef struct { T_CRES_LIST_PARAM *alist; T_CRES_LIST_PARAM *flist; T_CRES_LIST_PARAM list[2]; } T_CRES_FREQ_LIST; typedef struct { UWORD8 tcr_next_to_ctrl; UWORD8 tcr_next_to_read; UWORD8 last_stored_tcr_to_read; UWORD8 ms_ctrl; UWORD8 ms_ctrl_d; UWORD8 ms_ctrl_dd; BOOL first_pass_flag; T_IL_LNA used_il_lna; T_IL_LNA used_il_lna_d; T_IL_LNA used_il_lna_dd; BOOL new_list_present; WORD8 beacon_meas; WORD8 fn_report; UWORD8 cres_meas_report; } T_TCR_LIST_SET; /***************************************************************************************/ /* L1A <-> L1S communication structure dedicated to packet mode */ /***************************************************************************************/ typedef struct { // Packet Idle Parameters // PCCCH parameters T_PCCCH_PARAM pccch; //-- T_P_IDLE_PARAM p_idle_param; // Packet Idle Parameters description // Packet Access Parameters T_PRACH_INFO pra_info; // Packet Access Parameters T_POLL_INFO poll_info; // Packet Transfer Parameters T_TRANSFER_PARAM transfer; // Serving Cell PBCCH parameters T_PBCCHS_PARAM pbcchs; // Neigbour Cell PBCCH parameters T_PBCCHN_PARAM pbcchn; // Interference measurement parameters T_ITMEAS_PARAM itmeas; // Measurement tasks management... //----------------------------------------- UWORD32 meas_param; // Synchro semaphore bit register for packet measurement tasks. UWORD32 l1ps_en_meas; // Enable packet Meas task bit register. // Access burst type //------------------ UWORD8 access_burst_type; // Frequency list Parameters used in Cell Reselection measurements // --------------------------------------------------------------- T_CR_FREQ_LIST cr_freq_list; // Parameters used in Packet Transfer Neighbour measurement task // ------------------------------------------------------------- T_TCR_LIST_SET tcr_freq_list; // Cell Reselection list, used both in Packet Idle and Packet Transfer // ------------------------------------------------------------------- T_CRES_FREQ_LIST cres_freq_list; } T_L1PA_L1PS_COM; /***************************************************************************************/ /* API (MCU <-> DSP) communication structures */ /***************************************************************************************/ typedef struct { // GPRS Extension............... API d_task_d_gprs; // (map?) Task, burst per burst (part of header) API d_task_u_gprs; // (map?) Task, burst per burst (part of header) API d_task_pm_gprs; // (map?) Task, burst per burst (part of header) API d_burst_nb_gprs; // (map?) burst identifier. (part of header) API a_ctrl_abb_gprs[8]; // (map?) Analog baseband control, burst per burst. API a_ctrl_power_gprs[8]; // (map?) Power control value, burst per burst. } T_DB_MCU_TO_DSP_GPRS; typedef struct { // GPRS Extension............... API d_task_d_gprs; // (map?) Task, burst per burst (part of header) API d_task_u_gprs; // (map?) Task, burst per burst (part of header) API d_task_pm_gprs; // (map?) Task, burst per burst (part of header) API d_burst_nb_gprs; // (map?) burst identifier. (part of header) API a_burst_toa_gprs[8]; // (map?) Time of arrival, burst per burst API a_burst_pm_gprs[8]; // (map?) Receive Power Level, burst per burst API a_burst_angle_gprs[8];// (map?) Angle deviation, burst per burst API a_burst_snr_gprs[8]; // (map?) Signal to noise ratio, burst per burst } T_DB_DSP_TO_MCU_GPRS; #if (DSP == 34) || (DSP == 35) || (DSP == 36) typedef struct { // GEA module API d_gea_mode; API a_gea_kc[4]; API d_hole1_ndb_gprs[8]; API d_a5mode_ovly; API d_sched_mode_gprs; API d_hole2_ndb_gprs[5]; API d_usf_updated_gprs; API d_win_start_gprs; API d_usf_vote_enable; API d_bbctrl_gprs; API d_hole3_ndb_gprs[2]; // (map?) BTS physical timeslot mapping. API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) API a_usf_gprs[8]; API a_interf_meas_gprs[8]; API a_ptcchu_gprs[4]; API a_dd_md_gprs[16]; API a_du_gprs[4][29]; API a_pu_gprs[4][15]; API d_rlcmac_rx_no_gprs; API a_dd_gprs[8][31]; API a_ramp_gprs[8][16]; } T_NDB_MCU_DSP_GPRS; #elif (DSP == 33) typedef struct { // GEA module API d_gea_mode; API a_gea_kc[4]; API d_hole1_ndb_gprs[8]; API d_a5mode_ovly; API d_sched_mode_gprs; API d_hole2_ndb_gprs[5]; API d_usf_updated_gprs; API d_win_start_gprs; API d_usf_vote_enable; API d_bbctrl_gprs; API d_hole3_ndb_gprs[2]; // (map?) BTS physical timeslot mapping. API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) API a_usf_gprs[8]; API a_interf_meas_gprs[8]; API a_ptcchu_gprs[4]; API a_dd_md_gprs[16]; API a_du_gprs[4][29]; API a_pu_gprs[4][15]; API d_rlcmac_rx_no_gprs; API a_dd_gprs[8][31]; API a_ramp_gprs[8][16]; } T_NDB_MCU_DSP_GPRS; #else typedef struct { // GPRS Extension............... API a_ramp_gprs[8][16]; #if (CODE_VERSION != SIMULATION) API a_hole1_gprs[22]; // hole for a_du_1 and d_a5_mode #endif API d_ptcchu_ctrl_abb_gprs; API d_ptcchu_ctrl_power_gprs; API d_ptcchd_burst_nb_gprs; #if (CODE_VERSION != SIMULATION) API a_hole2_gprs[184]; #endif API d_usf_updated_gprs; API d_win_start_gprs; // (map?) BTS physical timeslot mapping. API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) API a_usf_gprs[8]; API a_interf_meas_gprs[8]; API d_background_enable; API d_background_abort; API d_background_state; API d_max_background; API a_background_tasks[16]; API a_back_task_io[10]; #if (CODE_VERSION != SIMULATION) API a_hole3_gprs[19]; #endif API d_gea_mode; API a_gea_kc[4]; API d_sched_mode_gprs; #if (CODE_VERSION != SIMULATION) API a_hole4_gprs[384]; #endif API a_du_gprs[4][29]; API d_rlcmac_rx_no_gprs; API a_dd_gprs[4][31]; API a_pu_gprs[4][15]; #if (CODE_VERSION != SIMULATION) API a_hole5_gprs[112]; #endif API a_ptcchu_gprs[4]; API a_dd_md_gprs[16]; } T_NDB_MCU_DSP_GPRS; #endif #if (DSP == 34) || (DSP == 35) || (DSP == 36) typedef struct { // GPRS Extension............... API_SIGNED d_overlay_rlcmac_cfg_gprs; API_SIGNED d_mac_threshold; API_SIGNED d_sd_threshold; API_SIGNED d_nb_max_iteration; } T_PARAM_MCU_DSP_GPRS; #elif (DSP == 33) typedef struct { // GPRS Extension............... API_SIGNED d_overlay_rlcmac_cfg_gprs; API_SIGNED d_mac_threshold; API_SIGNED d_sd_threshold; API_SIGNED d_nb_max_iteration; } T_PARAM_MCU_DSP_GPRS; #else typedef struct { // GPRS Extension............... API_SIGNED d_overlay_rlcmac_cfg_gprs; API_SIGNED d_lat_mcu_bridge; API_SIGNED d_lat_pll2div; API_SIGNED d_lat_mcu_hom2sam; API_SIGNED d_gprs_install_address; API_SIGNED d_mac_threshold; API_SIGNED d_sd_threshold; API_SIGNED d_nb_max_iteration; } T_PARAM_MCU_DSP_GPRS; #endif /***************************************************************************************/ /* L1PS -> DSP communication structure... */ /***************************************************************************************/ typedef struct { T_DB_DSP_TO_MCU_GPRS *pdsp_db_r_ptr; // MCU<->DSP comm. read page (Double Buffered comm. memory). T_DB_MCU_TO_DSP_GPRS *pdsp_db_w_ptr; // MCU<->DSP comm. write page (Double Buffered comm. memory). T_NDB_MCU_DSP_GPRS *pdsp_ndb_ptr; // MCU<->DSP comm. read/write (Non Double Buffered comm. memory). T_PARAM_MCU_DSP_GPRS *pdsp_param_ptr; // MCU<->DSP comm. read/write (Param comm. memory). } T_L1PS_DSP_COM; /***************************************************************************************/ /* L1PS -> MAC-S communication structure... */ /***************************************************************************************/ typedef struct { UWORD8 nb; // Number of error found UWORD8 id[10]; // Error ID } T_MACS_STATUS; typedef struct { BOOL new_set; // Set to 1 if allocation parameters have changed, reset by MAC-S UWORD8 rx_allocation; // Downlink resources relative to Layer 1 frames UWORD8 tx_nb_allocation; // Uplink resources used to transmit normal bursts relative to Layer 1 frames UWORD8 tx_prach_allocation; // Uplink resources used to transmit PRACH bursts relative to Layer 1 frames UWORD8 pwr_allocation; // Measurement gap relative to Layer 1 frames BOOL fix_alloc_exhaust_flag; // Set to 1 if the fixed allocation has just exhausted BOOL rlc_downlink_call; T_MACS_STATUS macs_status; } T_L1PS_MACS_COM;