FreeCalypso > hg > fc-small-hw
annotate mmtb1/README @ 44:635eab0b714e
duart28: U5 & U6 slot change by PCB layout engineer
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 28 Jul 2020 17:01:37 +0000 |
parents | 0f9bdd60ce50 |
children |
rev | line source |
---|---|
0
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 MMTB1 is a Modem Module Test Board intended for testing and exercising Huawei |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 GTM900 and FreeCalypso FCM40 modem modules. Specifically, the following two |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 usages are envisioned: |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 1) When MMTB1 is first built, it will be used with GTM900-B and possibly with |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 GTM900-P modules. MMTB1 will allow the combination of FC firmware on GTM900 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 hw to be exercised properly, and then the combination of MMTB1+GTM900 can be |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 officially recommended to community members seeking to play with FreeCalypso |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 fw. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 2) When FCM40 gets built much later, MMTB1 will be used for production testing |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 and bring-up of first FCM40 modules. MMTB1 is more GTM900-oriented and |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 therefore won't be ideal for exercising FCM40 modules, but it will be |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 sufficient for basic bring-up, missing only microphone and MCSI interfaces. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 Once that milestone is passed, a new MMTB version will be created |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 specifically for FCM40 functional demonstration. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 MMTB1 is going to break out the FPC interface of GTM900 as follows: |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 * The power input connector will be the same as on FCDEV3B. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 * The two Calypso UARTs will be brought out to a 10-pin header in the same |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 pinout as on FCDEV3B, with GPIOs 2 & 3 (DCD and DTR) brought to the two pins |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 which are unused and unconnected on FCDEV3B. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 * PWON and RESET pushbuttons will be provided on MMTB1 just like on FCDEV3B, as |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 well as a green power-on LED. The LED will be controlled by the Vio output |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 coming out of the modem module, but without loading the Vio rail itself, |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 using raw VBAT and the same MOSFET circuit as on FCDEV3B. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 * There will be a SIM socket on the MMTB1 itself. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 * There will be two 2-pin headers for analog audio, one for the earpiece |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 speaker and one for the microphone, connected to the corresponding GTM900 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 interface pins. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 The following GTM900 interfaces will NOT be brought out or exercised in any way: |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 * ADIN1 (general-purpose ADC) connection on pin 14; |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 * GPIO1 connection (DSR output) on pin 16; |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 * GPIO0 connection (RI output) on pin 17; |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 * Vbackup connection on pin 30; |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 * LPG output on pin 32; |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 * AUXO secondary audio output on pins 33 & 34; |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 * AUXI secondary audio input on pins 39 & 40. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 These interfaces have been omitted because they are not essential for the |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 intended application of exercising FreeCalypso fw on GTM900 hw, because I am |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 lazy (not interested in doing more PCB layout work than I have to) and because |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 I couldn't find a suitable MOSFET to implement another LED circuit for LPG. |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 No pull-up or pull-down resistors are provided on UART inputs to the Calypso, |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 including GPIO3 serving as the DTR input: I will always have all of the UART |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 signals connected to an FT2232x dual UART adapter (PLDkit FT2232C/D breakout |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 boards at first, then later our own DUART28) by way of a custom-crimped cable |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 that mates with the 10-pin header as a solid piece, leaving no possibility of |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 any UART signals being left unconnected. If anyone does not like this |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 arrangement, feel free to make your own alternative GTM900 breakout/interface |
0f9bdd60ce50
fc-small-hw separated from old freecalypso-schem repo
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 board. |