FreeCalypso > hg > fc-small-hw

annotate lunalcd3/README @ 84:dbd57e8dd82a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
sim-fpc-pasv/pcb: add Makefile for Gerber output
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 02 Nov 2022 07:22:44 +0000
parents 31c8b1291b4a
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
71
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 Our lunalcd2 board built in 2021-08 (see ../lunalcd2 directory) was a success
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 for the most part, but there is one issue: there is an elastic force originating
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 somewhere in the area where the LCD module's FPC tail is folded under the body
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 of the module, this force acts against both gravity and the adhesive, and it
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 pushes the bottom of the LCD module upward, away from the PCB.
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 Seeking to prevent this cosmetic problem (and possibly one of mechanical
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 reliability) on our upcoming Venus board, we got a little metal bracket
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 custom-made for us that is designed to hold the bottom of the LCD module in
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 place. The present lunalcd3 PCB is a copy of lunalcd2 with the addition of two
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 holes matching those in the bracket, thereby allowing this bracket to be used
31c8b1291b4a lunalcd3 project started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 to hold down the LCD module.