FreeCalypso > hg > fc-small-hw

diff lcdtest1/schem+bom/schem.v @ 0:0f9bdd60ce50

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
fc-small-hw separated from old freecalypso-schem repo
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 21 Oct 2019 00:53:38 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lcdtest1/schem+bom/schem.v	Mon Oct 21 00:53:38 2019 +0000
@@ -0,0 +1,77 @@
+module board ();
+
+wire GND, P_5V, P_3V3;
+wire [7:0] DB;
+wire RD, WR, RS, CS, RESET;
+wire [1:3] LEDK;
+
+conn_36pin_plus2 fpc (  .pin_1(DB[7]),
+			.pin_2(DB[6]),
+			.pin_3(DB[5]),
+			.pin_4(DB[4]),
+			.pin_5(DB[3]),
+			.pin_6(DB[2]),
+			.pin_7(DB[1]),
+			.pin_8(DB[0]),
+			.pin_9(GND),
+			.pin_10(GND),	/* unused lower data bus */
+			.pin_11(GND),	/* unused lower data bus */
+			.pin_12(GND),	/* unused lower data bus */
+			.pin_13(GND),	/* unused lower data bus */
+			.pin_14(GND),	/* unused lower data bus */
+			.pin_15(GND),	/* unused lower data bus */
+			.pin_16(GND),	/* unused lower data bus */
+			.pin_17(GND),	/* unused lower data bus */
+			.pin_18(P_3V3),	/* IOVCC */
+			.pin_19(P_3V3),	/* VCI */
+			.pin_20(RD),
+			.pin_21(WR),
+			.pin_22(RS),
+			.pin_23(CS),
+			.pin_24(RESET),
+			.pin_25(P_3V3),	/* IM0 tied high */
+			.pin_26(GND),
+			.pin_27(P_5V),	/* LEDA */
+			.pin_28(LEDK[1]),
+			.pin_29(LEDK[2]),
+			.pin_30(LEDK[3]),
+			/* the remaining pins are NC */
+			.pin_31(),
+			.pin_32(),
+			.pin_33(),
+			.pin_34(),
+			.pin_35(),
+			.pin_36(),
+			/* ground the two mounting pads */
+			.pin_37(GND),
+			.pin_38(GND)
+	);
+
+resistor R1 (LEDK[1], GND);
+resistor R2 (LEDK[2], GND);
+resistor R3 (LEDK[3], GND);
+
+header_13pin data (.pin_1(DB[7]),
+		   .pin_2(DB[6]),
+		   .pin_3(DB[5]),
+		   .pin_4(DB[4]),
+		   .pin_5(DB[3]),
+		   .pin_6(DB[2]),
+		   .pin_7(DB[1]),
+		   .pin_8(DB[0]),
+		   .pin_9(RD),
+		   .pin_10(WR),
+		   .pin_11(RS),
+		   .pin_12(CS),
+		   .pin_13(RESET)
+	);
+
+header_2pin pwr_5V (.pin_1(P_5V),
+		    .pin_2(GND)
+	);
+
+header_2pin pwr_3V3 (.pin_1(P_3V3),
+		     .pin_2(GND)
+	);
+
+endmodule