view lunalcd3/README @ 78:7762ad7f61fe

lunalcd3.pcb: add orientation marker to U1
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 18 Nov 2021 07:44:45 +0000
parents 31c8b1291b4a
children
line wrap: on
line source

Our lunalcd2 board built in 2021-08 (see ../lunalcd2 directory) was a success
for the most part, but there is one issue: there is an elastic force originating
somewhere in the area where the LCD module's FPC tail is folded under the body
of the module, this force acts against both gravity and the adhesive, and it
pushes the bottom of the LCD module upward, away from the PCB.

Seeking to prevent this cosmetic problem (and possibly one of mechanical
reliability) on our upcoming Venus board, we got a little metal bracket
custom-made for us that is designed to hold the bottom of the LCD module in
place.  The present lunalcd3 PCB is a copy of lunalcd2 with the addition of two
holes matching those in the bracket, thereby allowing this bracket to be used
to hold down the LCD module.