view lcdtest1/schem+bom/MCL @ 84:dbd57e8dd82a default tip

sim-fpc-pasv/pcb: add Makefile for Gerber output
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 02 Nov 2022 07:22:44 +0000
parents 0f9bdd60ce50
children
line wrap: on
line source

# Connectors

J1:
 hier=fpc
 manufacturer=Hirose
 manufacturer_part_number=FH12-36S-0.5SH
 description=FPC connector, 36 positions
 vendor=Digi-Key
 vendor_part_number=HFJ136CT-ND
 footprint=FH12_36S_05SH_1L	# pin 1 on the left
 npins=38			# 36 + 2 mounting pads

J2:
 hier=data
 description=Header, 0.100", single row, 13 posts
 source=Breakaway from scrap
 part=yes
 footprint=JUMPER13
 npins=13

part header-2pin:
 footprint=JUMPER2
 description=Header, 0.100", 2 posts
 manufacturer=Molex
 manufacturer_part_number=0901200122
 vendor=Digi-Key
 vendor_part_number=WM8072-ND
 npins=2

J3:
 # 5V power
 hier=pwr_5V
 part=header-2pin

J4:
 # 3.3V power
 hier=pwr_3V3
 part=header-2pin

# Resistors

part led-series-resistor:
 footprint=0603
 value=120R
 description=Chip resistor, 120 ohm, 1%, 0603
 manufacturer=Vishay Dale
 manufacturer_part_number=CRCW0603120RFKEA
 vendor=Digi-Key
 vendor_part_number=541-120HCT-ND
 npins=2

R1:
 hier=R1
 part=led-series-resistor

R2:
 hier=R2
 part=led-series-resistor

R3:
 hier=R3
 part=led-series-resistor