Tue, 25 Oct 2022 07:31:52 +0000 |
Mychaela Falconia |
sim-fpc-pasv: PCB layout done
|
Tue, 25 Oct 2022 06:13:01 +0000 |
Mychaela Falconia |
sim-fpc-pasv: schem+BOM design complete
|
Tue, 25 Oct 2022 05:13:55 +0000 |
Mychaela Falconia |
sim-fpc-pasv MCL: FPC connector footprint
|
Tue, 25 Oct 2022 03:17:34 +0000 |
Mychaela Falconia |
sim-fpc-pasv: starting project with MCL
|
Sat, 04 Dec 2021 22:28:05 +0000 |
Mychaela Falconia |
lunalcd3: add Makefile for Gerber output generation
|
Thu, 18 Nov 2021 07:44:45 +0000 |
Mychaela Falconia |
lunalcd3.pcb: add orientation marker to U1
|
Thu, 18 Nov 2021 07:40:13 +0000 |
Mychaela Falconia |
lunalcd3.pcb: add orientation marker to SW1
|
Thu, 18 Nov 2021 06:55:23 +0000 |
Mychaela Falconia |
lunalcd3.pcb: layout changes around top bracket
|
Thu, 18 Nov 2021 06:45:36 +0000 |
Mychaela Falconia |
lunalcd3.pcb: extend ground plane for top bracket addition
|
Thu, 18 Nov 2021 06:44:24 +0000 |
Mychaela Falconia |
lunalcd3.pcb: add top bracket to LCD footprint
|
Thu, 18 Nov 2021 06:29:01 +0000 |
Mychaela Falconia |
lunalcd3.pcb: reroute LCD power trace around right ear of bottom bracket
|
Thu, 18 Nov 2021 06:11:27 +0000 |
Mychaela Falconia |
lunalcd3.pcb: manually add bottom strap to LCD footprint
|
Thu, 18 Nov 2021 04:59:47 +0000 |
Mychaela Falconia |
lunalcd3 project started
|
Sat, 26 Jun 2021 21:16:48 +0000 |
Mychaela Falconia |
lunalcd2/src/Makefile: generate BOM outputs
|
Sat, 26 Jun 2021 21:16:08 +0000 |
Mychaela Falconia |
lunalcd2/src/MCL: resistor parts nailed down
|
Sat, 26 Jun 2021 20:40:29 +0000 |
Mychaela Falconia |
lunalcd2/src/MCL: different part for two-post VBAT supply header
|
Fri, 25 Jun 2021 23:08:00 +0000 |
Mychaela Falconia |
lunalcd2/pcb: add Makefile
|
Fri, 25 Jun 2021 22:59:37 +0000 |
Mychaela Falconia |
lunalcd2.pcb: manual DRC fixes
|
Fri, 25 Jun 2021 22:52:20 +0000 |
Mychaela Falconia |
lunalcd2.pcb complete except for DRC
|
Fri, 25 Jun 2021 22:31:24 +0000 |
Mychaela Falconia |
lunalcd2.pcb almost complete
|
Fri, 25 Jun 2021 20:29:36 +0000 |
Mychaela Falconia |
lunalcd2.pcb started
|
Fri, 25 Jun 2021 19:11:21 +0000 |
Mychaela Falconia |
lunalcd2/src/Makefile: generate elements.pcb
|
Fri, 25 Jun 2021 19:08:13 +0000 |
Mychaela Falconia |
lunalcd2/src/Makefile: generate pcb-netlist.txt
|
Fri, 25 Jun 2021 19:01:35 +0000 |
Mychaela Falconia |
lunalcd2: MCL binding complete
|
Fri, 25 Jun 2021 18:44:11 +0000 |
Mychaela Falconia |
lunalcd2: structural Verilog source captured
|
Fri, 25 Jun 2021 17:12:02 +0000 |
Mychaela Falconia |
lunalcd2: footprint for the DIP switch pack
|
Wed, 23 Jun 2021 23:53:15 +0000 |
Mychaela Falconia |
lunalcd2 project started with MCL
|
Wed, 23 Jun 2021 08:44:43 +0000 |
Mychaela Falconia |
lunakpd1/README added
|
Wed, 23 Jun 2021 08:23:10 +0000 |
Mychaela Falconia |
lunalcd[12]/README written
|
Tue, 22 Jun 2021 05:27:16 +0000 |
Mychaela Falconia |
lcr0402: add Makefile
|
Tue, 22 Jun 2021 05:20:42 +0000 |
Mychaela Falconia |
lcr0402 project started
|
Sun, 02 Aug 2020 20:51:27 +0000 |
Mychaela Falconia |
duart28c/src/MCL: update for Digi-Key parts actually on order
|
Wed, 29 Jul 2020 15:53:57 +0000 |
Mychaela Falconia |
duart28c/src/Makefile: U7.slotmap dependency was missed
|
Wed, 29 Jul 2020 07:59:20 +0000 |
Mychaela Falconia |
duart28c: new parts added to netlist
|
Wed, 29 Jul 2020 07:30:45 +0000 |
Mychaela Falconia |
duart28c/src/primitives: OD buffer pieces added
|
Wed, 29 Jul 2020 07:27:14 +0000 |
Mychaela Falconia |
duart28c: 74LVC2G07 pinout captured
|
Wed, 29 Jul 2020 07:21:04 +0000 |
Mychaela Falconia |
duart28c MCL: new components added
|
Wed, 29 Jul 2020 07:08:28 +0000 |
Mychaela Falconia |
duart28c: started with a copy from duart28
|
Tue, 28 Jul 2020 17:54:56 +0000 |
Mychaela Falconia |
duart28: another U5 slot change
|
Tue, 28 Jul 2020 17:01:37 +0000 |
Mychaela Falconia |
duart28: U5 & U6 slot change by PCB layout engineer
|
Fri, 24 Jul 2020 23:27:57 +0000 |
Mychaela Falconia |
duart28/how-to-compile added
|
Fri, 24 Jul 2020 23:23:42 +0000 |
Mychaela Falconia |
duart28/pcb: starting point for layout job
|
Fri, 24 Jul 2020 20:22:36 +0000 |
Mychaela Falconia |
duart28/design-spec: layout instructions added
|
Fri, 24 Jul 2020 20:21:54 +0000 |
Mychaela Falconia |
duart28/src/Makefile: added dependency on U[56].slotmap
|
Fri, 24 Jul 2020 20:20:55 +0000 |
Mychaela Falconia |
duart28/src/MCL: value attribute was wrong on the tantalum cap
|
Thu, 23 Jul 2020 19:49:00 +0000 |
Mychaela Falconia |
duart28/design-spec: circuit description should be complete
|
Thu, 23 Jul 2020 18:14:16 +0000 |
Mychaela Falconia |
duart28/design-spec: re-measured partial power-down current
|
Thu, 23 Jul 2020 06:59:32 +0000 |
Mychaela Falconia |
duart28/design-spec: coming along
|
Tue, 14 Jul 2020 19:01:29 +0000 |
Mychaela Falconia |
duart28/design-spec: minor fixes in the so-far-written section
|
Tue, 14 Jul 2020 07:40:42 +0000 |
Mychaela Falconia |
duart28/design-spec started
|
Sun, 05 Jul 2020 00:10:45 +0000 |
Mychaela Falconia |
duart28/src/Makefile: netlist MCL binding added
|
Sat, 04 Jul 2020 23:37:47 +0000 |
Mychaela Falconia |
duart28 MCL: resistors captured
|
Sat, 04 Jul 2020 22:02:49 +0000 |
Mychaela Falconia |
duart28: added bypass caps on FT2232D VCCIOA & VCCIOB
|
Sat, 04 Jul 2020 21:50:10 +0000 |
Mychaela Falconia |
duart28 MCL: capacitors captured
|
Mon, 29 Jun 2020 03:15:08 +0000 |
Mychaela Falconia |
duart28: U5 & U6 preliminary slotmaps
|
Sun, 28 Jun 2020 22:06:24 +0000 |
Mychaela Falconia |
duart28: new design ideas
|
Sat, 13 Jun 2020 18:12:28 +0000 |
Mychaela Falconia |
duart28 MCL: ferrite bead defined
|
Sat, 13 Jun 2020 17:46:18 +0000 |
Mychaela Falconia |
duart28 MCL: crystal defined
|
Sat, 13 Jun 2020 06:57:04 +0000 |
Mychaela Falconia |
duart28 MCL: beginning of hier= mapping
|
Sat, 13 Jun 2020 06:46:05 +0000 |
Mychaela Falconia |
duart28/src/vsrc/board.v: aux_5V added
|
Sat, 13 Jun 2020 06:38:05 +0000 |
Mychaela Falconia |
duart28: vsrc passes sverp
|
Sat, 13 Jun 2020 05:28:01 +0000 |
Mychaela Falconia |
duart28/src/primitives: adapted from fc-uja
|
Sat, 13 Jun 2020 05:18:55 +0000 |
Mychaela Falconia |
duart28 MCL: added 2-pin header for misc-use 5V
|
Sat, 13 Jun 2020 05:12:39 +0000 |
Mychaela Falconia |
duart28 project started
|
Sat, 09 May 2020 08:13:26 +0000 |
Mychaela Falconia |
lunakpd1/pcb/Makefile added
|
Sat, 09 May 2020 08:08:42 +0000 |
Mychaela Falconia |
lunakpd1.pcb complete
|
Sat, 09 May 2020 06:40:15 +0000 |
Mychaela Falconia |
lunakpd1.pcb: keypad layout complete
|
Sat, 09 May 2020 06:08:40 +0000 |
Mychaela Falconia |
lunakpd1: beginning of sensible layout
|
Sat, 09 May 2020 05:11:54 +0000 |
Mychaela Falconia |
lunakpd1 placetool written
|
Sat, 09 May 2020 04:00:24 +0000 |
Mychaela Falconia |
lunakpd1.pcb started
|
Sat, 09 May 2020 00:38:07 +0000 |
Mychaela Falconia |
lunakpd1 project started
|
Fri, 03 Apr 2020 00:02:03 +0000 |
Mychaela Falconia |
lunalcd1/pcb/Makefile added
|
Thu, 02 Apr 2020 23:26:47 +0000 |
Mychaela Falconia |
lunalcd1.pcb: should be complete
|
Thu, 02 Apr 2020 22:41:19 +0000 |
Mychaela Falconia |
lunalcd1.pcb: layout started, close to complete
|
Thu, 02 Apr 2020 18:25:19 +0000 |
Mychaela Falconia |
lunalcd1: added pull-down resistor on BL_EN line
|
Wed, 01 Apr 2020 21:14:56 +0000 |
Mychaela Falconia |
lunalcd1: updated footprint for LDO regulator
|
Wed, 01 Apr 2020 21:13:21 +0000 |
Mychaela Falconia |
lunalcd1: backlight resistors changed to 38.3R
|
Wed, 01 Apr 2020 16:52:34 +0000 |
Mychaela Falconia |
lunalcd1/src/MCL: use new FPC connector + LCD module footprint
|
Sun, 22 Mar 2020 03:19:38 +0000 |
Mychaela Falconia |
lunalcd1 board project started
|
Tue, 10 Dec 2019 06:56:59 +0000 |
Mychaela Falconia |
mmtb1/pcb: added Makefile for fab output generation
|
Tue, 10 Dec 2019 06:51:02 +0000 |
Mychaela Falconia |
mmtb1.pcb: silk text markings added
|
Tue, 10 Dec 2019 06:12:04 +0000 |
Mychaela Falconia |
mmtb1.pcb: DRC fixed to pass
|
Mon, 21 Oct 2019 01:02:20 +0000 |
Mychaela Falconia |
.hgignore added, based on freecalypso-schem version
|
Mon, 21 Oct 2019 00:53:38 +0000 |
Mychaela Falconia |
fc-small-hw separated from old freecalypso-schem repo
|