FreeCalypso > hg > fc-tourmaline
annotate doc/Voice-pseudo-modem @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 19 Oct 2020 05:11:29 +0000 |
parents | a62e5bf88434 |
children |
rev | line source |
---|---|
50
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 Back when TI's TCS211 fw existed in the traditional world of phone handset and |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 cellular modem manufacturers, there were only two principal classes of target |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 devices for it: handsets and modems. The former have local UI hardware (LCDs |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 and keypads) and run firmware that works with this UI hw, the latter have no |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 such hw and run firmware that expects to be controlled by an external host via |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 AT commands. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 But the peculiar circumstances under which our FreeCalypso family of projects |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 operates give rise to a third possibility: what happens if one were to run |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 non-UI-capable firmware that expects control via AT commands on a hardware |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 target device that was originally designed to be an end user phone handset, in |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 our case either Motorola C1xx or Pirelli DP-L10? The result is what I call a |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 voice pseudo-modem (VPM): the phone's LCD stays dark, the buttons do nothing |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 and the device expects to be controlled via AT commands as if it were a modem |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 like the one in GTA01/02 smartphones, but there is no practically usable way to |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 make use of any data services, only voice and SMS, hence my VPM term. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 It needs to be noted clearly that the VPM hack described in this article is NOT |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 a substitute for proper modem hardware - if your area of interest is Standard |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 Modem functionality (the full set of GSM and GPRS services accessed via AT |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 commands), then you need a proper hardware platform for it, either FCDEV3B or |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 Caramel2. However, support for VPM operation in FreeCalypso exists for the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 following purposes: |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 * On some hw targets the VPM configuration can be an intermediate stepping stone |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 toward potential future UI-enabled firmware - this situation holds on the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 C139. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 * Being able to run FreeCalypso fw in the VPM configuration on Mot C1xx hw that |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 many people already have and that may still be readily and cheaply available |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 makes our firmware accessible to those who are not able to buy new FreeCalypso |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 hardware. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 * If you have a Pirelli DP-L10 phone (now very rare and hard to get, but were |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 readily available in early 2013 when I started FreeCalypso): while there is |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 unfortunately very little chance of being able to turn it into a practically |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 usable Libre Dumbphone with FreeCalypso (the unwanted extra chips sans docs |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 which we don't know how to power down are a killer), running FreeCalypso fw |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 on the Pirelli in the VPM configuration is so easy and convenient that I do |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 it all the time during development and testing. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 Playing with FreeCalypso VPM on C1xx phones |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 =========================================== |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 If a Mot C1xx phone is flashed with a FreeCalypso firmware image in the VPM |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 configuration, it will behave as follows: |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 * The LCD will remain dark and the buttons will do nothing no matter what. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 * If you plug in Motorola's charging adapter (it's a regulated 5 VDC power |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 source, but with a non-USB connector) and you had properly installed the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 charging config file when creating the aftermarket FFS for FreeCalypso, the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 battery will charge. When you unplug the charging adapter, if there is no |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 host computer running FC host program rvinterf connected to the phone |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 serially, the phone will power off some 15 to 20 s after the charger unplug. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 * If you press the power button while the phone is off, even momentarily, the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 phone will power on and boot (with nothing on the LCD as usual), but if the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 headset jack serial port is not connected to a computer running rvinterf, the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 firmware will execute a power-off after at most 20 s. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 * In order to make the phone-turned-VPM do anything useful, you will need to |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 connect the headset jack serial port to a host computer running FC host tools, |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 run rvinterf to keep the phone alive (keep it from automatically powering |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 off), and use FC host utility fc-shell to issue AT commands to it over the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 RVTMUX channel managed by rvinterf. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 * The phone will remain on (i.e., the fw won't execute an automatic power-off) |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 for as long as there is either a charging power adapter plugged in or a |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 connected host computer running rvinterf - if there is no charging power, |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 the fw will send periodic keepalive queries to check for the presence of a |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 connected rvinterf process. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 Playing with FreeCalypso VPM on a Pirelli DP-L10 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 ================================================ |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 There are two ways in which one can play with FC VPM firmware on a Pirelli: |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 * FC VPM fw can be flashed into the phone just like on Mot C1xx. To make this |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 approach sensible, you will also need to craft and install a charging config |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 file that will cause our FCHG driver to initiate the charging process |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 automatically when the battery voltage falls below some sensible threshold, |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 without requiring manual charging start via AT@CHG=1. In this case the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
84 reflashed phone will behave like C1xx in the previous section, except that |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
85 the charging power source and the host computer connection are one and the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 same in the case of Pirelli's USB. |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 * The other approach is to keep Pirelli's original fw in the flash, let the |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 phone function normally when not in the middle of a FreeCalypso VPM session, |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 and load our FC VPM fw into RAM via fc-xram, making use of this phone's huge |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 RAM that can hold an entire functional fw image without flashing. This is |
a62e5bf88434
first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 the Mother's preferred method. |