FreeCalypso > hg > fc-tourmaline
annotate targets/tangomdm.h @ 220:0ed36de51973
ABB semaphore protection overhaul
The ABB semaphone protection logic that came with TCS211 from TI
was broken in several ways:
* Some semaphore-protected functions were called from Application_Initialize()
context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with
NU_INVALID_SUSPEND in this context, but the return value wasn't checked,
and NU_Release_Semaphore() would be called unconditionally at the end.
The latter call would increment the semaphore count past 1, making the
semaphore no longer binary and thus no longer effective for resource
protection. The fix is to check the return value from NU_Obtain_Semaphore()
and skip the NU_Release_Semaphore() call if the semaphore wasn't properly
obtained.
* Some SPI hardware manipulation was being done before entering the semaphore-
protected critical section. The fix is to reorder the code: first obtain
the semaphore, then do everything else.
* In the corner case of L1/DSP recovery, l1_abb_power_on() would call some
non-semaphore-protected ABB & SPI init functions. The fix is to skip those
calls in the case of recovery.
* A few additional corner cases existed, all of which are fixed by making
ABB semaphore protection 100% consistent for all ABB functions and code paths.
There is still one remaining problem of priority inversion: suppose a low-
priority task calls an ABB function, and some medium-priority task just happens
to preempt right in the middle of that semaphore-protected ABB operation. Then
the high-priority SPI task is locked out for a non-deterministic time until
that medium-priority task finishes its work and goes back to sleep. This
priority inversion problem remains outstanding for now.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 20:55:25 +0000 |
parents | 1d88c6370725 |
children | 10b3a6876273 |
rev | line source |
---|---|
18
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 #define CONFIG_TARGET_TANGO 1 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 #define CONFIG_GPIO046_OUTPUTS 1 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 #define CONFIG_TANGO_MODEM 1 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 #define CONFIG_MCSI_MODEM 1 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 #define CONFIG_GPIO1_HIGH 1 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 #define GPIO1_SPEAKER_CTRL 0 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 #define UARTFAX_CLASSIC_DTR_DCD 1 |
1d88c6370725
targets/*.h: import from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 #define TARGET_HAS_PWL 1 |