annotate doc/Config-vars @ 244:96784b8974eb

Switch_ON(): detect charging mode by CHGPRES bit Consider the following scenario: the phone is on, the user plugs in the charger, and then executes the power-off operation. In the Iota VRPC this sequence translates to a switch-off immediately followed by another switch-on - but the CHGSTS bit doesn't get set on the second switch-on cycle! Disassembly of Pirelli's fw shows that they check the CHGPRES bit, and furthermore, if both CHGPRES and ONBSTS are set, the code they pass to their modified Power_ON_Button() function is the one for charging - so let's adopt the same CHGPRES check and the same priority order for switch-on causes.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 03 May 2021 06:51:29 +0000
parents a62e5bf88434
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
50
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 The following Bourne shell variables can be set on the ./configure.sh command
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 line to tweak the firmware build configuration:
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 ALLOW_CSIM_GSM
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 Per TI's original design, the AT+CSIM command does not allow GSM APDUs
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 of class 0xA0. Openmoko found some need for them, and they patched
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 their modem fw to allow these APDUs with AT+CSIM. With our new hybrid
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 modem fw this policy setting is configurable at build time; the default
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 is ALLOW_CSIM_GSM=1 (GSM APDUs allowed).
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 DISABLE_SLEEP
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 The general default is DISABLE_SLEEP=0, and the firmware automatically
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 enables all of the chipset's available sleep modes on boot. Setting
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 DISABLE_SLEEP=1 causes all sleep modes to be disabled by default on
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 boot (they can still be enabled with the AT%SLEEP command); this
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 setting is needed for FCDEV3B V1 boards that have a hardware bug that
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 causes breakage when sleep modes are enabled.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 FCHG_STATE
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23 This setting enables or disables the FCHG battery charging driver.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 This driver can be enabled even on targets where no charging hw exists
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 (it won't do anything without explicit configuration), and our UI
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 firmware will soon require FCHG to be always present - hence our current
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27 config mechanism already sets FCHG_STATE=1 for UI-enabled configs. If
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 the firmware is built in a non-UI modem or VPM configuration, the
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29 default FCHG_STATE setting depends on the target: enabled on targets
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30 that have battery charging hardware (c11x, c139, c155, j100, pirelli)
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 and disabled otherwise.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 L1_DYN_DSP_DWNLD
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 This setting enables TI's dynamic DSP patch download mechanism. When
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 the firmware is built for a Calypso target with DSP ROM version 36 in
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 the silicon (all FreeCalypso-made hw and most of the supported legacy
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 targets), L1_DYN_DSP_DWNLD is enabled by default and needs to be kept
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 enabled for correct operation: the patch code we got from TI for this
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 ROM is the dynamic download version, and the ARM-side L1 code expects
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 all of these patches to be present, both the static part and the
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 dynamic parts. However, one can build our fw with L1_DYN_DSP_DWNLD=0
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43 for experimental testing, to see what breaks when the dynamic patches
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 are omitted.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 L1_VOICE_MEMO_AMR
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 This setting enables or disables support in L1 and in the RiViera Audio
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 Service for AMR voice memo recording and playback. This code has not
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50 been properly studied yet and no test AT commands are provided for it,
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 but it is enabled by default like in TI's original TCS211 fw.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 MELODY_E2
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 This setting enables or disables support in L1 and in the RiViera Audio
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56 Service for playing E2-format melodies. The default is MELODY_E2=1
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57 like in TI's original TCS211 fw. Note that Melody E1 support is always
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 enabled; setting MELODY_E2=0 disables only Melody E2, but not E1.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60 MEMSUPER
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62 This setting enables the memory supervision feature in TI's GPF and in
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63 the G23M protocol stack built on top of it. This code has not been
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64 properly studied yet; play with it at your own risk.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 OSL
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 This flag selects between original blob and reconstructed C versions of
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 the OSL glue component of GPF - see the Blob-status article.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 OSX
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 This flag selects between original blob and reconstructed C versions of
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74 the OSX glue component of GPF - see the Blob-status article.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 RVTMUX_ON_MODEM
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 This setting configures the usage of Calypso UARTs. RVTMUX_ON_MODEM=0
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 puts the AT command interface on the MODEM UART and RVTMUX on the IrDA
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 UART (TI's intended config and the default on sensible hw targets);
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 RVTMUX_ON_MODEM=1 (default on the crippled C1xx targets) puts RVTMUX on
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 the MODEM UART, sacrificing the standard AT command interface.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84 SERIAL_DYNAMIC_SWITCH
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 TI's TCS211 fw includes a provision (only for Bluetooth-enabled fw in
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 TI's original) to switch one UART between the AT command interface and
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88 RVTMUX while the other UART is fixed for Bluetooth. In FreeCalypso we
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89 have changed this code to work without Bluetooth, for the purpose of
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 switching the user-facing MODEM UART between AT commands and RVTMUX,
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91 but the mechanism does not work properly yet and is disabled by default.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 Enable it with SERIAL_DYNAMIC_SWITCH=1 if you would like to play with
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93 it.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 SPEECH_RECO
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97 This setting enables or disables support in L1 and in the RiViera Audio
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 Service for TI's speech recognition mechanism. This code and the
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 underlying DSP facility itself have not been properly studied yet and
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100 no test AT commands are provided for it, but it is enabled by default
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101 like in TI's original TCS211 fw.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 SUFFIX
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
105 This setting is solely for configuration management. If you make a
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106 build with any of the settings described in this document changed from
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107 the default, you should also pass a SUFFIX=-xxx argument so your special
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108 build will be appropriately identified in the build directory name and
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
109 in the firmware version ID string compiled into the image. The naming
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
110 of suffixes is up to you, but here are some examples:
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
111
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112 DISABLE_SLEEP=1 SUFFIX=-nosleep
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113 L1_DYN_DSP_DWNLD=0 SUFFIX=-nodyn
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 MELODY_E2=0 SUFFIX=-noe2
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115 MEMSUPER=2 SUFFIX=-ps
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116 SERIAL_DYNAMIC_SWITCH=1 SUFFIX=-sds
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117 SPEECH_RECO=0 SUFFIX=-nosr
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118 TI_PROFILER=1 SUFFIX=-prf
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 TR_BAUD_CONFIG=TR_BAUD_812500 SUFFIX=-812500
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120 USE_STR2IND=1 SUFFIX=-s2i
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122 TI_PROFILER
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
123
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
124 TI's original firmware architecture had a built-in profiler (program
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
125 counter sampler) enabled with TI_PROFILER=1; we (FreeCalypso) are just
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
126 beginning to experiment with this debug feature in late 2020.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
127
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
128 TRACEMASK_IN_FFS
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
129
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
130 TI's Test Interface (TIF) component in the GPF realm includes an
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
131 optional feature for saving trace masks in FFS, but TI's production
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
132 firmwares had it disabled. We have now switched to recompiling the
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
133 component in question from source, but we still keep this
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
134 TRACEMASK_IN_FFS code disabled by default, at least for now.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
135 Set TRACEMASK_IN_FFS=1 to enable this code in GPF.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137 TR_BAUD_CONFIG
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139 The value of this symbol is an alphanumeric keyword of the form
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 TR_BAUD_xxxxxx; the default is TR_BAUD_115200. See
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141 src/cs/drivers/drv_core/uart/traceswitch.h for the available baud rate
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142 choices; the most practical use is setting TR_BAUD_CONFIG=TR_BAUD_812500
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
143 when you need to run the RVTMUX serial channel at the maximum possible
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
144 baud rate.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
145
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
146 USE_CACHE
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
147
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
148 This setting enables or disables the use of cached libs - see the
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
149 Cached libraries section in the Compiling article for the explanation.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
150
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
151 USE_STR2IND
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
152
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
153 Unlike TI's original firmwares, we build without str2ind by default.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
154 You can enable str2ind with USE_STR2IND=1, but the time to build the fw
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
155 will be significantly longer as the compiler has to be run twice for
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156 each C source file, with str2ind sandwiched in between.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158 The following Bourne shell variables are used inside the build system, set by
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159 functional configuration stanzas:
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 GPRS
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
162
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
163 Self-explanatory: enables or disables GPRS.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
164
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
165 MMI
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
166
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
167 TI's original config variable: MMI=0 for the AT-command-controlled
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
168 modem configuration or MMI=2 for the UI-enabled configuration with
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
169 BMI and MFW.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
170
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
171 R2D_STATE
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
172
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
173 Enables or disables inclusion of the R2D driver in the firmware.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
174
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
175 R2D_EMBEDDED_LCD
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
176
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
177 This setting selects the framebuffer config to be used by the R2D
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
178 driver, valid settings are:
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
179
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
180 R2D_EMBEDDED_LCD=7: D-Sample color framebuffer
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
181 R2D_EMBEDDED_LCD=8: D-Sample B&W framebuffer
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
182 R2D_EMBEDDED_LCD=10: new FreeCalypso 96x64 pixel B&W framebuffer
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
183
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
184 See src/cs/drivers/drv_app/r2d/r2d_config.h for the details.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
185
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
186 SRVC
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
187
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
188 TI's original config variable, selects the presence or absence of data
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
189 services other than GPRS as follows:
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
190
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
191 SRVC=0: voice and SMS only
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
192 SRVC=1: CSD and fax enabled
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
193 SRVC=2: CSD enabled, but not fax
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
194
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
195 UI_CONFIG
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
196
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
197 The two allowed settings in FC Tourmaline are UI_CONFIG=bigcolor and
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
198 UI_CONFIG=smallbw. This setting controls the passing of -DLSCREEN and
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
199 -DCOLOURDISPLAY to all C modules in the UI layers.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
200
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
201 Finally, CHIPSET, DSP, RF and AMR variables reflect the physical configuration
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
202 of the selected target hw that no amount of software hacking can change.
a62e5bf88434 first round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
203 (The AMR variable indicates the presence or absence of AMR support in the DSP.)