FreeCalypso > hg > fc-tourmaline
annotate targets/fcdev3b.conf @ 244:96784b8974eb
Switch_ON(): detect charging mode by CHGPRES bit
Consider the following scenario: the phone is on, the user plugs in
the charger, and then executes the power-off operation. In the Iota
VRPC this sequence translates to a switch-off immediately followed
by another switch-on - but the CHGSTS bit doesn't get set on the second
switch-on cycle! Disassembly of Pirelli's fw shows that they check
the CHGPRES bit, and furthermore, if both CHGPRES and ONBSTS are set,
the code they pass to their modified Power_ON_Button() function is
the one for charging - so let's adopt the same CHGPRES check and
the same priority order for switch-on causes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 03 May 2021 06:51:29 +0000 |
parents | 7ce079c7c5dd |
children |
rev | line source |
---|---|
32
7ce079c7c5dd
targets/*.conf: adapted from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 LINK_SCRIPT_SRC=src/cs/system/template/gsm_ds_pirelli_flash.template |
7ce079c7c5dd
targets/*.conf: adapted from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 RAM_LINK_SCRIPT_SRC=src/cs/system/template/gsm_ds_pirelli_ram.template |
7ce079c7c5dd
targets/*.conf: adapted from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 FLASH_BASE_ADDR=0 |
7ce079c7c5dd
targets/*.conf: adapted from Magnetite
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 FLASH_SECTOR_SIZE=0x40000 |