FreeCalypso > hg > fc-tourmaline
comparison src/cs/layer1/tpu_drivers/source0/tpudrv12.h @ 267:10b3a6876273
fc-target.h preprocessor symbols: introduce CONFIG_TARGET_LEO_RFFE
Out of our currently existing supported targets, Leonardo and Tango
use TI's classic Leonardo RFFE wiring. However, we would like to
use the same quadband RFFE with the same classic wiring on our
FreeCalypso Libre Dumbphone handset, and also on the planned
development board that will serve as a stepping stone toward that
goal. Therefore, we introduce the new CONFIG_TARGET_LEO_RFFE
preprocessor symbol, and conditionalize on this symbol in tpudrv12.h,
instead of a growing || of different targets.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Wed, 09 Jun 2021 07:26:51 +0000 |
parents | 4e78acac3d88 |
children |
comparison
equal
deleted
inserted
replaced
266:160a5b3a076c | 267:10b3a6876273 |
---|---|
232 #define RF_SER_OFF 0 | 232 #define RF_SER_OFF 0 |
233 | 233 |
234 #define TEST_TX_ON 0 | 234 #define TEST_TX_ON 0 |
235 #define TEST_RX_ON 0 | 235 #define TEST_RX_ON 0 |
236 | 236 |
237 #if defined(CONFIG_TARGET_LEONARDO) || defined(CONFIG_TARGET_ESAMPLE) || \ | 237 #ifdef CONFIG_TARGET_LEO_RFFE |
238 defined(CONFIG_TARGET_TANGO) | |
239 | 238 |
240 // 4-band config (E-sample, P2, Leonardo) | 239 // 4-band config (E-sample, P2, Leonardo) |
241 #define FEM_7 BIT_2 // act2 | 240 #define FEM_7 BIT_2 // act2 |
242 #define FEM_8 BIT_1 // act1 | 241 #define FEM_8 BIT_1 // act1 |
243 #define FEM_9 BIT_4 // act4 | 242 #define FEM_9 BIT_4 // act4 |