FreeCalypso > hg > fc-tourmaline
comparison src/cs/drivers/drv_app/fchg/fchg_process.c @ 0:4e78acac3d88
src/{condat,cs,gpf,nucleus}: import from Selenite
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 16 Oct 2020 06:23:26 +0000 |
parents | |
children | 75067af48bfd |
comparison
equal
deleted
inserted
replaced
-1:000000000000 | 0:4e78acac3d88 |
---|---|
1 /* | |
2 * In this module we are going to implement the main process functions | |
3 * for FCHG. | |
4 */ | |
5 | |
6 #include "fchg/fchg_env.h" | |
7 #include "fchg/fchg_func_i.h" | |
8 #include "rv/rv_general.h" | |
9 #include "rvf/rvf_api.h" | |
10 #include "rvm/rvm_use_id_list.h" | |
11 #include "abb/abb.h" | |
12 #include "fc-target.h" | |
13 #include <string.h> | |
14 #include <stdio.h> | |
15 | |
16 extern UINT16 madc_vbat_2_physical(UINT16 adc_val); | |
17 extern UINT16 madc_vbat_inverse(UINT16 mv); | |
18 | |
19 #if defined(CONFIG_TARGET_C155) || defined(CONFIG_TARGET_J100) | |
20 #define LEDC 0x20 | |
21 #else | |
22 #define LEDC 0 | |
23 #endif | |
24 | |
25 void pwr_init_discharge(void) | |
26 { | |
27 pwr_ctrl->curr_disch_thresh = 0; | |
28 } | |
29 | |
30 static void handle_discharge(void) | |
31 { | |
32 UINT16 i; | |
33 char trace[64]; | |
34 | |
35 /* first we need to find the current threshold we are at */ | |
36 i = pwr_ctrl->curr_disch_thresh; | |
37 /* is there one below? */ | |
38 if (++i == pwr_ctrl->nb_thresholds) | |
39 return; | |
40 /* are we crossing it? */ | |
41 if (pwr_ctrl->batt_mv >= pwr_ctrl->batt_thresholds[i].bat_voltage) | |
42 return; | |
43 /* yes, we crossed it - see if we fell even further down */ | |
44 while (i < pwr_ctrl->nb_thresholds && | |
45 pwr_ctrl->batt_mv < pwr_ctrl->batt_thresholds[i].bat_voltage) | |
46 i++; | |
47 /* the last one was it */ | |
48 i--; | |
49 pwr_ctrl->curr_disch_thresh = i; | |
50 sprintf(trace, "Battery fell through %u%% mark", | |
51 pwr_ctrl->batt_thresholds[i].remain_capa); | |
52 rvf_send_trace(trace, strlen(trace), NULL_PARAM, | |
53 RV_TRACE_LEVEL_WARNING, FCHG_USE_ID); | |
54 } | |
55 | |
56 static void start_i2v_cal(void) | |
57 { | |
58 UINT16 bciconf; | |
59 | |
60 rvf_send_trace("Calibrating i2v offset", 22, NULL_PARAM, | |
61 RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
62 pwr_ctrl->state = FCHG_STATE_I2V_CAL_2; | |
63 bciconf = ABB_Read_Register_on_page(PAGE1, BCICONF); | |
64 bciconf &= 0x3E0; | |
65 bciconf |= pwr_ctrl->config.bciconf; | |
66 ABB_Write_Register_on_page(PAGE1, BCICONF, bciconf); | |
67 /* | |
68 * Set the CHDISPA bit and start the zero calibration routine | |
69 * of the I to V converter | |
70 */ | |
71 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0x0010); | |
72 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0x0019 | LEDC); | |
73 } | |
74 | |
75 static void start_ci_charging(void) | |
76 { | |
77 rvf_send_trace("Start CI charging", 17, NULL_PARAM, | |
78 RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
79 pwr_ctrl->state = FCHG_STATE_CI_CHARGING; | |
80 /* Select constant current charging. The charger is disabled */ | |
81 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0x0002); | |
82 /* Program the DAC with the constant current value */ | |
83 ABB_Write_Register_on_page(PAGE0, CHGREG, | |
84 pwr_ctrl->config.ci_current + pwr_ctrl->i2v_offset); | |
85 /* Enable the charger */ | |
86 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0x0003 | LEDC); | |
87 /* The total charging time starts now */ | |
88 pwr_ctrl->start_time = rvf_get_tick_count(); | |
89 } | |
90 | |
91 static void start_cv_charging(void) | |
92 { | |
93 UINT16 code; | |
94 | |
95 rvf_send_trace("Start CV charging", 17, NULL_PARAM, | |
96 RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
97 pwr_ctrl->state = FCHG_STATE_CV_CHARGING; | |
98 /* Select constant voltage charging. The charger is disabled */ | |
99 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
100 /* figure out the DAC code */ | |
101 code = madc_vbat_inverse(pwr_ctrl->config.cv_init_set); | |
102 rvf_send_trace("Voltage (DAC code) ", 19, code, | |
103 RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID); | |
104 /* Program the DAC with the constant voltage value */ | |
105 ABB_Write_Register_on_page(PAGE0, CHGREG, code); | |
106 /* Enable the charger */ | |
107 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0x0001 | LEDC); | |
108 /* CV control loop state init */ | |
109 pwr_ctrl->cv_dac_init = code; | |
110 pwr_ctrl->cv_dac_curr = code; | |
111 pwr_ctrl->cv_high_vbat_count = 0; | |
112 pwr_ctrl->cv_low_vbat_count = 0; | |
113 /* Ichg averaging state init */ | |
114 pwr_ctrl->ichg_fill_level = 0; | |
115 pwr_ctrl->ichg_ring_ptr = 0; | |
116 pwr_ctrl->ichg_low_count = 0; | |
117 } | |
118 | |
119 static void start_charge_condition_met(void) | |
120 { | |
121 rvf_send_trace("Charge start condition met", 26, NULL_PARAM, | |
122 RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
123 if (pwr_ctrl->config.bciconf) | |
124 start_i2v_cal(); | |
125 else { | |
126 pwr_ctrl->i2v_offset = 0; | |
127 start_ci_charging(); | |
128 } | |
129 } | |
130 | |
131 static void ci_progress_trace(UINT16 ichg) | |
132 { | |
133 char trace[64]; | |
134 | |
135 sprintf(trace, "CI charging: Vbat=%u Ichg=%u i2v=%u", | |
136 pwr_ctrl->batt_mv, ichg, pwr_ctrl->i2v_offset); | |
137 rvf_send_trace(trace, strlen(trace), NULL_PARAM, | |
138 RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID); | |
139 } | |
140 | |
141 static int cv_ichg_process(UINT16 ichg_new) | |
142 { | |
143 UINT16 ichg_clip, ichg_entry; | |
144 UINT32 ichg_accum; | |
145 UINT16 i; | |
146 char trace[64]; | |
147 | |
148 if (pwr_ctrl->ichg_fill_level < ICHG_AVG_WINDOW) | |
149 pwr_ctrl->ichg_avg_buf[pwr_ctrl->ichg_fill_level++] = ichg_new; | |
150 else { | |
151 ichg_clip = pwr_ctrl->ichg_average + | |
152 pwr_ctrl->config.ichg_max_spike; | |
153 if (ichg_new > ichg_clip) | |
154 ichg_entry = ichg_clip; | |
155 else | |
156 ichg_entry = ichg_new; | |
157 pwr_ctrl->ichg_avg_buf[pwr_ctrl->ichg_ring_ptr++] = ichg_entry; | |
158 if (pwr_ctrl->ichg_ring_ptr >= ICHG_AVG_WINDOW) | |
159 pwr_ctrl->ichg_ring_ptr = 0; | |
160 } | |
161 ichg_accum = 0; | |
162 for (i = 0; i < pwr_ctrl->ichg_fill_level; i++) | |
163 ichg_accum += pwr_ctrl->ichg_avg_buf[i]; | |
164 pwr_ctrl->ichg_average = ichg_accum / pwr_ctrl->ichg_fill_level; | |
165 sprintf(trace, "CV charging: Vbat=%u Ichg=%u Ichg_avg=%u i2v=%u", | |
166 pwr_ctrl->batt_mv, ichg_new, pwr_ctrl->ichg_average, | |
167 pwr_ctrl->i2v_offset); | |
168 rvf_send_trace(trace, strlen(trace), NULL_PARAM, | |
169 RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID); | |
170 if (pwr_ctrl->ichg_average > | |
171 (pwr_ctrl->config.end_current + pwr_ctrl->i2v_offset)) { | |
172 pwr_ctrl->ichg_low_count = 0; | |
173 return 0; | |
174 } | |
175 pwr_ctrl->ichg_low_count++; | |
176 if (pwr_ctrl->ichg_low_count < pwr_ctrl->config.ichg_samples_needed) | |
177 return 0; | |
178 rvf_send_trace("Stopping charge by low current condition", 40, | |
179 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
180 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
181 pwr_init_discharge(); | |
182 pwr_ctrl->state = FCHG_STATE_READY_TO_RECHARGE; | |
183 return 1; | |
184 } | |
185 | |
186 static int overvoltage_end_charge_check(void) | |
187 { | |
188 if (pwr_ctrl->batt_mv < pwr_ctrl->config.overvoltage) | |
189 return 0; | |
190 if (pwr_ctrl->cv_dac_curr != | |
191 (pwr_ctrl->cv_dac_init - pwr_ctrl->config.cv_dac_max_decr)) | |
192 return 0; | |
193 rvf_send_trace("Stopping charge by overvoltage condition", 40, | |
194 NULL_PARAM, RV_TRACE_LEVEL_WARNING, FCHG_USE_ID); | |
195 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
196 pwr_init_discharge(); | |
197 pwr_ctrl->state = FCHG_STATE_READY_TO_RECHARGE; | |
198 return 1; | |
199 } | |
200 | |
201 static void cv_ctrl_loop_high_check(void) | |
202 { | |
203 if (pwr_ctrl->batt_mv < pwr_ctrl->config.cv_ctrl_loop_high) { | |
204 pwr_ctrl->cv_high_vbat_count = 0; | |
205 return; | |
206 } | |
207 pwr_ctrl->cv_high_vbat_count++; | |
208 if (pwr_ctrl->cv_high_vbat_count < pwr_ctrl->config.cv_samples_needed) | |
209 return; | |
210 if (pwr_ctrl->cv_dac_curr == | |
211 (pwr_ctrl->cv_dac_init - pwr_ctrl->config.cv_dac_max_decr)) | |
212 return; | |
213 pwr_ctrl->cv_dac_curr--; | |
214 ABB_Write_Register_on_page(PAGE0, CHGREG, pwr_ctrl->cv_dac_curr); | |
215 rvf_send_trace("Sub CV DAC", 10, pwr_ctrl->cv_dac_curr, | |
216 RV_TRACE_LEVEL_DEBUG_MEDIUM, FCHG_USE_ID); | |
217 pwr_ctrl->cv_high_vbat_count = 0; | |
218 } | |
219 | |
220 static void cv_ctrl_loop_low_check(void) | |
221 { | |
222 if (pwr_ctrl->batt_mv >= pwr_ctrl->config.cv_ctrl_loop_low) { | |
223 pwr_ctrl->cv_low_vbat_count = 0; | |
224 return; | |
225 } | |
226 pwr_ctrl->cv_low_vbat_count++; | |
227 if (pwr_ctrl->cv_low_vbat_count < pwr_ctrl->config.cv_samples_needed) | |
228 return; | |
229 if (pwr_ctrl->cv_dac_curr == | |
230 (pwr_ctrl->cv_dac_init + pwr_ctrl->config.cv_dac_max_incr)) | |
231 return; | |
232 pwr_ctrl->cv_dac_curr++; | |
233 ABB_Write_Register_on_page(PAGE0, CHGREG, pwr_ctrl->cv_dac_curr); | |
234 rvf_send_trace("Add CV DAC", 10, pwr_ctrl->cv_dac_curr, | |
235 RV_TRACE_LEVEL_DEBUG_MEDIUM, FCHG_USE_ID); | |
236 pwr_ctrl->cv_low_vbat_count = 0; | |
237 } | |
238 | |
239 static int charging_time_limit_check(void) | |
240 { | |
241 if ((rvf_get_tick_count() - pwr_ctrl->start_time) < | |
242 RVF_SECS_TO_TICKS(pwr_ctrl->config.charge_time_limit)) | |
243 return 0; | |
244 rvf_send_trace("Stopping charge by time exceeded condition", 42, | |
245 NULL_PARAM, RV_TRACE_LEVEL_WARNING, FCHG_USE_ID); | |
246 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
247 pwr_init_discharge(); | |
248 pwr_ctrl->state = FCHG_STATE_RECHARGE_TIMER; | |
249 pwr_ctrl->start_time = rvf_get_tick_count(); | |
250 return 1; | |
251 } | |
252 | |
253 void pwr_process_adc(struct pwr_adc_ind_s *msg) | |
254 { | |
255 pwr_ctrl->batt_mv = madc_vbat_2_physical(msg->data[0]); | |
256 | |
257 switch (pwr_ctrl->state) { | |
258 case FCHG_STATE_NO_EXT_PWR: | |
259 case FCHG_STATE_PWR_PLUG_TIMER: | |
260 case FCHG_STATE_NO_CHARGING: | |
261 handle_discharge(); | |
262 return; | |
263 case FCHG_STATE_READY_TO_CHARGE: | |
264 handle_discharge(); | |
265 if (!(msg->data[9] & CHGPRES)) { | |
266 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
267 return; | |
268 } | |
269 if (pwr_ctrl->batt_mv < pwr_ctrl->config.start_thresh) | |
270 start_charge_condition_met(); | |
271 return; | |
272 case FCHG_STATE_READY_TO_RECHARGE: | |
273 handle_discharge(); | |
274 if (!(msg->data[9] & CHGPRES)) { | |
275 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
276 return; | |
277 } | |
278 if (pwr_ctrl->batt_mv < pwr_ctrl->config.restart_thresh) | |
279 start_charge_condition_met(); | |
280 return; | |
281 case FCHG_STATE_I2V_CAL_1: | |
282 if (!(msg->data[9] & CHGPRES)) { | |
283 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
284 return; | |
285 } | |
286 if (pwr_ctrl->config.bciconf) | |
287 start_i2v_cal(); | |
288 else { | |
289 pwr_ctrl->i2v_offset = 0; | |
290 start_ci_charging(); | |
291 } | |
292 return; | |
293 case FCHG_STATE_I2V_CAL_2: | |
294 pwr_ctrl->i2v_offset = msg->data[2]; | |
295 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
296 rvf_send_trace("i2v offset (MADC code) ", 23, | |
297 pwr_ctrl->i2v_offset, | |
298 RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID); | |
299 if (!(msg->data[9] & CHGPRES)) { | |
300 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
301 pwr_init_discharge(); | |
302 return; | |
303 } | |
304 start_ci_charging(); | |
305 return; | |
306 case FCHG_STATE_CI_CHARGING: | |
307 ci_progress_trace(msg->data[2]); | |
308 if (!(msg->data[9] & CHGPRES)) { | |
309 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
310 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
311 pwr_init_discharge(); | |
312 return; | |
313 } | |
314 if (charging_time_limit_check()) | |
315 return; | |
316 if (pwr_ctrl->batt_mv >= pwr_ctrl->config.ci2cv_thresh) | |
317 start_cv_charging(); | |
318 return; | |
319 case FCHG_STATE_CV_CHARGING: | |
320 if (!(msg->data[9] & CHGPRES)) { | |
321 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
322 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
323 pwr_init_discharge(); | |
324 return; | |
325 } | |
326 if (cv_ichg_process(msg->data[2])) | |
327 return; | |
328 if (overvoltage_end_charge_check()) | |
329 return; | |
330 if (charging_time_limit_check()) | |
331 return; | |
332 cv_ctrl_loop_high_check(); | |
333 cv_ctrl_loop_low_check(); | |
334 return; | |
335 case FCHG_STATE_RECHARGE_TIMER: | |
336 handle_discharge(); | |
337 if ((rvf_get_tick_count() - pwr_ctrl->start_time) < | |
338 RVF_SECS_TO_TICKS(pwr_ctrl->config.recharge_delay)) | |
339 return; | |
340 rvf_send_trace("Restart time met, allowing new charging", 39, | |
341 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, | |
342 FCHG_USE_ID); | |
343 pwr_ctrl->state = FCHG_STATE_READY_TO_RECHARGE; | |
344 return; | |
345 default: | |
346 rvf_send_trace("Invalid state in pwr_process_adc()", 32, | |
347 pwr_ctrl->state, RV_TRACE_LEVEL_ERROR, | |
348 FCHG_USE_ID); | |
349 } | |
350 } | |
351 | |
352 void pwr_handle_timer(void) | |
353 { | |
354 if (pwr_ctrl->state != FCHG_STATE_PWR_PLUG_TIMER) | |
355 return; | |
356 rvf_send_trace("Timer expired, ready to charge", 30, NULL_PARAM, | |
357 RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID); | |
358 pwr_ctrl->state = FCHG_STATE_READY_TO_CHARGE; | |
359 } | |
360 | |
361 void pwr_charger_plug(void) | |
362 { | |
363 if (pwr_ctrl->state != FCHG_STATE_NO_EXT_PWR) { | |
364 rvf_send_trace("Charger plug event in unexpected state", 38, | |
365 pwr_ctrl->state, RV_TRACE_LEVEL_ERROR, | |
366 FCHG_USE_ID); | |
367 return; | |
368 } | |
369 if (!pwr_ctrl->config_present) { | |
370 rvf_send_trace( | |
371 "Charger plugged in, but no config: won't charge", 47, | |
372 NULL_PARAM, RV_TRACE_LEVEL_ERROR, FCHG_USE_ID); | |
373 pwr_ctrl->state = FCHG_STATE_NO_CHARGING; | |
374 return; | |
375 } | |
376 if (pwr_ctrl->config.start_delay) { | |
377 rvf_send_trace("Charger plug, starting timer", 28, NULL_PARAM, | |
378 RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
379 rvf_start_timer(FCHG_TIMER, | |
380 RVF_MS_TO_TICKS(pwr_ctrl->config.start_delay), | |
381 FALSE); | |
382 pwr_ctrl->state = FCHG_STATE_PWR_PLUG_TIMER; | |
383 } else { | |
384 rvf_send_trace("Charger plug, ready to charge", 29, NULL_PARAM, | |
385 RV_TRACE_LEVEL_DEBUG_HIGH, FCHG_USE_ID); | |
386 pwr_ctrl->state = FCHG_STATE_READY_TO_CHARGE; | |
387 } | |
388 } | |
389 | |
390 void pwr_charger_unplug(void) | |
391 { | |
392 switch (pwr_ctrl->state) { | |
393 case FCHG_STATE_NO_EXT_PWR: | |
394 rvf_send_trace("Charger unplug, already handled", 31, | |
395 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, | |
396 FCHG_USE_ID); | |
397 /* nothing to do */ | |
398 return; | |
399 case FCHG_STATE_PWR_PLUG_TIMER: | |
400 case FCHG_STATE_READY_TO_CHARGE: | |
401 case FCHG_STATE_READY_TO_RECHARGE: | |
402 case FCHG_STATE_I2V_CAL_1: | |
403 case FCHG_STATE_RECHARGE_TIMER: | |
404 case FCHG_STATE_NO_CHARGING: | |
405 rvf_send_trace("Charger unplug", 14, NULL_PARAM, | |
406 RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID); | |
407 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
408 return; | |
409 case FCHG_STATE_I2V_CAL_2: | |
410 case FCHG_STATE_CI_CHARGING: | |
411 case FCHG_STATE_CV_CHARGING: | |
412 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
413 rvf_send_trace("Charger unplug, charging stopped", 32, | |
414 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, | |
415 FCHG_USE_ID); | |
416 pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR; | |
417 pwr_init_discharge(); | |
418 return; | |
419 default: | |
420 rvf_send_trace("Invalid state in pwr_charger_unplug()", 35, | |
421 pwr_ctrl->state, RV_TRACE_LEVEL_ERROR, | |
422 FCHG_USE_ID); | |
423 } | |
424 } | |
425 | |
426 void pwr_charge_start_req(void) | |
427 { | |
428 switch (pwr_ctrl->state) { | |
429 case FCHG_STATE_NO_EXT_PWR: | |
430 rvf_send_trace("Cannot charge without a power source", 36, | |
431 NULL_PARAM, RV_TRACE_LEVEL_ERROR, FCHG_USE_ID); | |
432 return; | |
433 case FCHG_STATE_NO_CHARGING: | |
434 if (!pwr_ctrl->config_present) { | |
435 rvf_send_trace("No config set, cannot charge", 28, | |
436 NULL_PARAM, RV_TRACE_LEVEL_ERROR, | |
437 FCHG_USE_ID); | |
438 return; | |
439 } | |
440 /* FALL THRU */ | |
441 case FCHG_STATE_PWR_PLUG_TIMER: | |
442 case FCHG_STATE_READY_TO_CHARGE: | |
443 case FCHG_STATE_READY_TO_RECHARGE: | |
444 case FCHG_STATE_RECHARGE_TIMER: | |
445 rvf_send_trace("Starting charge on user request", 31, | |
446 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, | |
447 FCHG_USE_ID); | |
448 pwr_ctrl->state = FCHG_STATE_I2V_CAL_1; | |
449 return; | |
450 case FCHG_STATE_I2V_CAL_1: | |
451 case FCHG_STATE_I2V_CAL_2: | |
452 case FCHG_STATE_CI_CHARGING: | |
453 case FCHG_STATE_CV_CHARGING: | |
454 rvf_send_trace( | |
455 "Charging already in progress, start request ignored", | |
456 51, NULL_PARAM, RV_TRACE_LEVEL_WARNING, FCHG_USE_ID); | |
457 return; | |
458 default: | |
459 rvf_send_trace("Invalid state in pwr_charge_start_req()", 37, | |
460 pwr_ctrl->state, RV_TRACE_LEVEL_ERROR, | |
461 FCHG_USE_ID); | |
462 } | |
463 } | |
464 | |
465 void pwr_charge_stop_req(void) | |
466 { | |
467 switch (pwr_ctrl->state) { | |
468 case FCHG_STATE_NO_EXT_PWR: | |
469 case FCHG_STATE_NO_CHARGING: | |
470 /* nothing to do */ | |
471 return; | |
472 case FCHG_STATE_PWR_PLUG_TIMER: | |
473 case FCHG_STATE_READY_TO_CHARGE: | |
474 case FCHG_STATE_READY_TO_RECHARGE: | |
475 case FCHG_STATE_I2V_CAL_1: | |
476 case FCHG_STATE_RECHARGE_TIMER: | |
477 rvf_send_trace("Charging disabled by user request", 33, | |
478 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, | |
479 FCHG_USE_ID); | |
480 pwr_ctrl->state = FCHG_STATE_NO_CHARGING; | |
481 return; | |
482 case FCHG_STATE_I2V_CAL_2: | |
483 case FCHG_STATE_CI_CHARGING: | |
484 case FCHG_STATE_CV_CHARGING: | |
485 ABB_Write_Register_on_page(PAGE0, BCICTL2, 0); | |
486 rvf_send_trace("Charging stopped by user request", 32, | |
487 NULL_PARAM, RV_TRACE_LEVEL_DEBUG_HIGH, | |
488 FCHG_USE_ID); | |
489 pwr_ctrl->state = FCHG_STATE_NO_CHARGING; | |
490 pwr_init_discharge(); | |
491 return; | |
492 default: | |
493 rvf_send_trace("Invalid state in pwr_charge_stop_req()", 36, | |
494 pwr_ctrl->state, RV_TRACE_LEVEL_ERROR, | |
495 FCHG_USE_ID); | |
496 } | |
497 } |