FreeCalypso > hg > fc-tourmaline
comparison src/cs/drivers/drv_app/ffs/board/drv.h @ 0:4e78acac3d88
src/{condat,cs,gpf,nucleus}: import from Selenite
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 16 Oct 2020 06:23:26 +0000 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
-1:000000000000 | 0:4e78acac3d88 |
---|---|
1 /****************************************************************************** | |
2 * Flash File System (ffs) | |
3 * Idea, design and coding by Mads Meisner-Jensen, mmj@ti.com | |
4 * | |
5 * ffs low level flash driver | |
6 * | |
7 * $Id: drv.h 1.15.1.25.1.1.1.20 Mon, 17 Nov 2003 08:51:37 +0100 tsj $ | |
8 * | |
9 ******************************************************************************/ | |
10 | |
11 #ifndef TARGET | |
12 #include "ffs.cfg" | |
13 #endif | |
14 | |
15 #if (TARGET == 1) | |
16 #include "chipset.cfg" | |
17 #endif | |
18 | |
19 | |
20 /****************************************************************************** | |
21 * Compile constants | |
22 ******************************************************************************/ | |
23 | |
24 // FFS driver version (in four-digit BCD format). Format is MMID, where MM | |
25 // is major revision number, incremented e.g. for major revision or support | |
26 // for new flash family/driver. I is minor revision that is incremented for | |
27 // minor changes or when a bug is corrected. D is incremented when support | |
28 // of another device is added. | |
29 #define FFS_DRV_VERSION ((uint16) 0x1011) | |
30 | |
31 // Default Allocation granularity of ffs data sectors (as power of two) | |
32 #define FFS_ATOM_LOG2 4 | |
33 | |
34 | |
35 /****************************************************************************** | |
36 * Macros | |
37 ******************************************************************************/ | |
38 | |
39 // Convert between address and block index. Only works if all blocks are the | |
40 // same size! | |
41 #define block2addr(block) (dev.base + dev.binfo[block].offset) | |
42 | |
43 // Note that it is *VERY* important that pointers to hardware and flash are | |
44 // declared volatile, otherwise the compiler optimizes some reads and writes | |
45 // out and this results in non-working code! | |
46 #define FLASH_WRITE_HALFWORD(addr, data) *(volatile uint16 *) (addr) = (data) | |
47 #define FLASH_READ_HALFWORD(addr) *((volatile uint16 *) (addr)) | |
48 | |
49 #if (TARGET == 1) | |
50 | |
51 #include "memif/mem.h" | |
52 #if (CHIPSET == 12) | |
53 #include "sys_inth.h" | |
54 #else | |
55 #include "inth/inth.h" | |
56 #endif | |
57 | |
58 #if (CHIPSET == 3) | |
59 #define INT_REQUESTED (*(volatile uint16 *) INTH_IT_REG) & \ | |
60 ~(*(volatile uint16 *) INTH_MASK_REG) | |
61 #elif (CHIPSET == 4 || CHIPSET == 5 || CHIPSET == 6 || CHIPSET == 7 || CHIPSET == 8 || CHIPSET == 9 || CHIPSET == 10 || CHIPSET == 11) | |
62 #define INT_REQUESTED ((*(volatile uint16 *) INTH_IT_REG1) & \ | |
63 ~(*(volatile uint16 *) INTH_MASK_REG1)) || \ | |
64 ((*(volatile uint16 *) INTH_IT_REG2) & \ | |
65 ~(*(volatile uint16 *) INTH_MASK_REG2)) | |
66 #elif (CHIPSET == 12) | |
67 #define INT_REQUESTED ((*(volatile uint16 *) C_INTH_IT_REG1) & \ | |
68 ~(*(volatile uint16 *) C_INTH_MASK_REG1)) || \ | |
69 ((*(volatile uint16 *) C_INTH_IT_REG2) & \ | |
70 ~(*(volatile uint16 *) C_INTH_MASK_REG2)) | |
71 #endif | |
72 #endif // (TARGET == 1) | |
73 | |
74 | |
75 /****************************************************************************** | |
76 * Types | |
77 ******************************************************************************/ | |
78 | |
79 // Flash driver identifiers. | |
80 enum FFS_DRIVER { | |
81 FFS_DRIVER_NULL = 0, // Null driver | |
82 | |
83 FFS_DRIVER_AMD = 2, // AMD dual/multi-bank driver | |
84 FFS_DRIVER_AMD_SB = 3, // AMD single-bank driver | |
85 | |
86 FFS_DRIVER_SST = 8, // SST dual/multi-bank driver | |
87 FFS_DRIVER_SST_SB = 9, // SST single-bank driver | |
88 | |
89 FFS_DRIVER_INTEL = 16, // Intel dual/multi-bank driver | |
90 FFS_DRIVER_INTEL_SB = 17, // Intel single-bank driver | |
91 | |
92 FFS_DRIVER_AMD_PSEUDO_SB = 32, // Test driver | |
93 FFS_DRIVER_TEST = 34, // Test driver | |
94 | |
95 FFS_DRIVER_RAM = 64 // Ram driver | |
96 }; | |
97 | |
98 | |
99 // Manufacturer identifiers. These should never have to be changed. They are | |
100 // ordered in alphabetically ascending order. | |
101 enum FFS_MANUFACTURER { | |
102 MANUFACT_AMD = 0x01, | |
103 MANUFACT_ATMEL = 0x1F, | |
104 MANUFACT_FUJITSU = 0x04, | |
105 MANUFACT_INTEL = 0x89, | |
106 MANUFACT_MXIC = 0xC2, | |
107 MANUFACT_SAMSUNG = 0xEC, | |
108 MANUFACT_SHARP = 0xB0, | |
109 MANUFACT_SST = 0xBF, | |
110 MANUFACT_TOSHIBA = 0x98, | |
111 MANUFACT_RAM = 0xFE, // Ram | |
112 MANUFACT_TEST = 0x54 // 'T'est manufacturer | |
113 }; | |
114 | |
115 | |
116 // Flash block information for one ffs block (flash sector). Note that the | |
117 // ffs block definition might be of a smaller size then the physical flash | |
118 // sector. The ffs blocks must be defined in ascending order of addresses. | |
119 struct block_info_s { | |
120 uint32 offset; | |
121 uint8 size_ld; // log2 of block size | |
122 uint8 unused1; | |
123 uint8 unused2; | |
124 uint8 unused3; | |
125 }; | |
126 | |
127 | |
128 // General flash information for one flash device | |
129 struct flash_info_s { | |
130 const struct block_info_s *binfo; // block info array for this device | |
131 char *base; // base flash address of ffs blocks | |
132 uint16 manufact; // read with flash A0 = 0 | |
133 uint16 device; // read with flash A0 = 1 | |
134 uint8 driver; // flash driver type | |
135 uint8 numblocks; // number of blocks defined for use by ffs | |
136 }; | |
137 extern const struct flash_info_s flash_info[]; | |
138 | |
139 enum DEVICE_STATE { | |
140 DEV_READ, | |
141 DEV_ERASE, | |
142 DEV_ERASE_SUSPEND, | |
143 DEV_WRITE | |
144 }; | |
145 | |
146 | |
147 // Note that it is *VERY* important that pointers to hardware and flash are | |
148 // declared volatile, otherwise the compiler optimizes some reads and writes | |
149 // out and this results in non-working code! | |
150 struct dev_s { | |
151 char *base; // base flash address of ffs blocks | |
152 struct block_info_s *binfo; | |
153 uint16 manufact; | |
154 uint16 device; | |
155 volatile uint16 *addr; // address being written or erased | |
156 uint16 data; // data currently being written (dev.state = WRITE) | |
157 uint32 blocksize; | |
158 uint8 blocksize_ld; | |
159 uint8 atomlog2; | |
160 uint8 driver; | |
161 uint8 state; // state of device (DEVICE_STATE) | |
162 uint8 numblocks; | |
163 uint8 atomsize; | |
164 uint8 atomnotmask; | |
165 }; | |
166 extern struct dev_s dev; | |
167 | |
168 | |
169 // Flash low level driver function pointers | |
170 struct ffsdrv_s { | |
171 int (* init)(void); | |
172 void (* erase)(uint8 block); | |
173 void (* write_halfword)(volatile uint16 *dst, uint16 value); | |
174 void (* write)(void *dst, const void *src, uint16 size); | |
175 void (* write_end)(void); | |
176 void (* erase_suspend)(void); | |
177 void (* erase_resume)(void); | |
178 }; | |
179 extern struct ffsdrv_s ffsdrv; | |
180 | |
181 | |
182 /****************************************************************************** | |
183 * Function Prototypes | |
184 ******************************************************************************/ | |
185 | |
186 void ffsdrv_write_byte(void *dst, uint8 value); | |
187 effs_t ffsdrv_init(void); | |
188 | |
189 extern int ffs_ram_image_address; |