comparison src/cs/layer1/tpu_drivers/source0/tpudrv10.h @ 0:4e78acac3d88

src/{condat,cs,gpf,nucleus}: import from Selenite
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 16 Oct 2020 06:23:26 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:4e78acac3d88
1 /****************** Revision Controle System Header ***********************
2 * GSM Layer 1 software
3 * Copyright (c) Texas Instruments 1998
4 *
5 * Filename tpudrv10.h
6 * Copyright 2003 (C) Texas Instruments
7 *
8 ****************** Revision Controle System Header ***********************/
9
10 #define BIT_0 0x000001
11 #define BIT_1 0x000002
12 #define BIT_2 0x000004
13 #define BIT_3 0x000008
14 #define BIT_4 0x000010
15 #define BIT_5 0x000020
16 #define BIT_6 0x000040
17 #define BIT_7 0x000080
18 #define BIT_8 0x000100
19 #define BIT_9 0x000200
20 #define BIT_10 0x000400
21 #define BIT_11 0x000800
22 #define BIT_12 0x001000
23 #define BIT_13 0x002000
24 #define BIT_14 0x004000
25 #define BIT_15 0x008000
26 #define BIT_16 0x010000
27 #define BIT_17 0x020000
28 #define BIT_18 0x040000
29 #define BIT_19 0x080000
30 #define BIT_20 0x100000
31 #define BIT_21 0x200000
32 #define BIT_22 0x400000
33 #define BIT_23 0x800000
34
35
36 //TRF6150 definitions
37 #define MODE0 0x000000
38 #define MODE1 0x000001
39 #define MODE2 0x000002
40 #define MODE3 0x000003
41 #define MODE4 0x000004
42 #define MODE5 0x000005
43 #define MODE6 0x000006
44 #define MODE7 0x000007
45
46 #define REGUL_ON BIT_3 //MODE0
47 #define BG_SPEEDUP BIT_4 //MODE0
48 #define RX_ON_CLARA BIT_5 //MODE0
49 #define TX_ON_CLARA BIT_6 //MODE0
50 #define PA_CTRLR_ON BIT_7 //MODE0
51 #define AUX_SYNTH_ON BIT_8 //MODE0
52 #define MAIN_SYNTH_OFF 0x000000 //MODE0
53 #define MAIN_SYNTH_ON_RX BIT_9 //MODE0
54 #define MAIN_SYNTH_ON_TX BIT_10 //MODE0
55 #define DCO_COMP_ON BIT_11 //MODE0
56 #define DCO_COMP_RUN BIT_12 //MODE0
57 #define BAND_SELECT_GSM BIT_13 //MODE0
58 #define BAND_SELECT_850 BIT_13 //MODE0
59 #define BAND_SELECT_PCS BIT_14 //MODE0
60 #define BAND_SELECT_DCS (BIT_14 | BIT_13)
61
62 #define RX_RF_GAIN BIT_15 //MODE0
63
64 // MODE1 is only for Receiver gain programming (AGC)
65
66 #define AUX_SHDW_ADD(arfcn) ((arfcn >= 822) && (arfcn <= 885)) ? BIT_3 : 0 //MODE2
67 #define AUX_SHDW_RCL BIT_4 //MODE2
68 #define MAIN_FCU_REG_100 BIT_7 //MODE2
69 #define PA_CTRL_I_DIOD BIT_23 //MODE2
70
71 //MODE3
72 #define TEST_MODE BIT_3 //MODE3
73 #define HB_OPLL_PRECHARGE BIT_4 //MODE3
74
75 #define HB_OPLL_CP_CUR_0_125MA 0x000000 //0.125 mA
76 #define HB_OPLL_CP_CUR_0_25MA BIT_5 //0.25 mA
77 #define HB_OPLL_CP_CUR_0_5MA BIT_6 //0.5 mA
78 #define HB_OPLL_CP_CUR_1MA (BIT_6 | BIT_5) //1 mA
79 #define HB_OPLL_CP_CUR_2MA BIT_7 //2 mA
80
81 #define LB_OPLL_PRECHARGE BIT_8 //MODE3
82
83 #define LB_OPLL_CP_CUR_0_125MA 0x000000 //0.125 mA
84 #define LB_OPLL_CP_CUR_0_25MA BIT_9 //0.25 mA
85 #define LB_OPLL_CP_CUR_0_5MA BIT_10 //0.5 mA
86 #define LB_OPLL_CP_CUR_1MA (BIT_10 | BIT_9) //1 mA
87 #define LB_OPLL_CP_CUR_2MA BIT_11 //2 mA
88
89 #define CLK_REF BIT_17 //MODE3
90 #define MAIN_VCO_EN BIT_18 //MODE3
91 #define AUX_VCO_EN BIT_19 //MODE3
92 #define EXT_VCO_CONTROL BIT_20 //MODE3
93 #define TEMP_SENSOR_EN BIT_21 //MODE3
94
95 //MODE4
96 #define MAIN_TIMER_RX_49_2US BIT_6 //MODE4
97 #define MAIN_TIMER_RX_55_35US ( 8 << 3) //added 30.01.02
98 #define MAIN_TIMER_RX_61_5US (10 << 3)
99 #define MAIN_TIMER_RX_78_9US (13 << 3)
100 #define MAIN_TIMER_RX_91_9US (15 << 3)
101 #define MAIN_TIMER_RX_98_4US (16 << 3)
102 #define MAIN_TIMER_RX_159_9US (26 << 3) //added 21.08 CR
103
104
105 #define MAIN_TIMER_TX_49_2US BIT_11 //MODE4
106 #define MAIN_TIMER_TX_61_5US (10 << 8) //added 30.01.02
107 #define MAIN_TIMER_TX_104US (17 << 8) //added for RS
108 #define MAIN_TIMER_TX_98_4US (16 << 8)
109 #define MAIN_TIMER_TX_123US (20 << 8) //added 21.08 CR
110
111 #define MAIN_CP_CUR_0 0x000000 //MODE4 400uA, 1.6mA
112 #define MAIN_CP_CUR_1 BIT_21 //MODE4 400uA, 3.2mA
113 #define MAIN_CP_CUR_2 BIT_22 //MODE4 800uA, 3.2mA
114 #define MAIN_CP_CUR_3 (BIT_22 | BIT_21)//MODE4 same as 2
115
116 #define FC_60 (60 << 13)
117 #define FC_63 (63 << 13)
118 #define FC_70 (70 << 13)
119 #define FC_100 (100 << 13)
120 #define FC_109 (109 << 13)
121 #define FC_110 (110 << 13)
122
123 //MODE5
124 #define SHDW_LOAD BIT_3 //MODE5
125 #define AUX_PRG_MOD BIT_4 //MODE5
126 #define AUX_PFD BIT_14 //MODE5
127
128 //MODE6
129 #define FREQ_CAL_ON BIT_4 //MODE6
130 #define FREQ_CAL_MODE BIT_5 //MODE6
131
132 //MODE7
133 #define FREQ_CAL_DATA (0xd << 19) // 6.15 (00000)-8.88 (01101)-12.66 pF (11111)- modified CR 11.09.01, was (0xb << 19)
134
135
136 // RF signals connected to TSPACT [0..7]
137 //#define RESET_RF BIT_0 // act0
138 #define CLA_SER_ON BIT_0 // act0
139 #define CLA_SER_OFF 0
140 #define TXVCO_ON 0 // act3 inverted
141 #define TXVCO_OFF BIT_3
142 #define TX_ON BIT_5 // act5
143 #define TX_OFF 0
144
145 // RF signals connected to TSPACT for Titanium v2.2
146 #if 0
147 //B-Sample
148 #define PA900_ON BIT_2 // signals are inverted therefore PA900_ON act1
149 #define PA1800_ON BIT_1 // and PA1800_ON act2
150 #define PA900_OFF BIT_1 //
151 #define PA1800_OFF BIT_2 //
152 #endif
153
154 #if 0
155 //C-Sample
156 #define PA900_ON BIT_1 // signals are inverted therefore PA900_ON act1
157 #define PA1800_ON BIT_2 // and PA1800_ON act2
158 #define PA900_OFF BIT_2 //
159 #define PA1800_OFF BIT_1 //
160 #endif
161
162 #if 1
163 //D-Sample
164 #define PA900_ON BIT_1 // signals are inverted therefore PA900_ON act1
165 #define PA1800_ON BIT_2 // and PA1800_ON act2
166 #define RX1900_ON 0
167 #define PA900_OFF BIT_2 //
168 #define PA1800_OFF BIT_1 //
169 #define RX1900_OFF BIT_4
170
171 //RX_UP/DOWN and TX_UP/DOWN
172 #define RU_900 (PA900_OFF | PA1800_OFF | RX1900_OFF)
173 #define RD_900 (PA900_OFF | PA1800_OFF | RX1900_OFF)
174 #define TU_900 (PA900_ON | PA1800_OFF | RX1900_OFF)
175 #define TD_900 (PA900_OFF | PA1800_OFF | RX1900_OFF)
176 #define TU_REV_900 (PA900_OFF | PA1800_ON | RX1900_OFF)
177
178 #define RU_850 (PA900_OFF | PA1800_OFF | RX1900_OFF)
179 #define RD_850 (PA900_OFF | PA1800_OFF | RX1900_OFF)
180 #define TU_850 (PA900_ON | PA1800_OFF | RX1900_OFF)
181 #define TD_850 (PA900_OFF | PA1800_OFF | RX1900_OFF)
182 #define TU_REV_850 (PA900_OFF | PA1800_ON | RX1900_OFF)
183
184 #define RU_1800 (PA900_OFF | PA1800_OFF | RX1900_OFF)
185 #define RD_1800 (PA900_OFF | PA1800_OFF | RX1900_OFF)
186 #define TU_1800 (PA900_OFF | PA1800_ON | RX1900_OFF)
187 #define TD_1800 (PA900_OFF | PA1800_OFF | RX1900_OFF)
188 #define TU_REV_1800 (PA900_ON | PA1800_OFF | RX1900_OFF)
189
190 #define RU_1900 (PA900_OFF | PA1800_OFF | RX1900_ON)
191 #define RD_1900 (PA900_OFF | PA1800_OFF | RX1900_OFF)
192 #define TU_1900 (PA900_OFF | PA1800_ON | RX1900_OFF)
193 #define TD_1900 (PA900_OFF | PA1800_OFF | RX1900_OFF)
194 #define TU_REV_1900 (PA900_ON | PA1800_OFF | RX1900_OFF)
195
196
197 #endif
198
199 #define TC1_DEVICE_ABB TC1_DEVICE0
200 #define TC1_DEVICE_RF TC1_DEVICE2
201
202
203 #define SL_SU_DELAY1 4 // No. bits to send + load data to shift + send write cmd + 1
204 #define SL_SU_DELAY2 3 // load data to shift + send write cmd + 1
205 #define SL_SU_DELAY3 5 // SL_SU_DELAY1 + serialization
206
207 #define DLT 20 // (TRF6150) DownLoadTime
208
209 #define DLT_1 1 // 1 tpu instruction = 1 qbit
210 #define DLT_2 2
211 #define DLT_3 3
212
213 #define DLT_1B 4 // 3*move + 1*byte (download)
214 #define DLT_2B 6 // 4*move + 2*byte
215 #define DLT_3B 8 // 5*move + 3*byte
216
217 //#define crch_timing 420//250//420//0 // CR d.07.08.01 - Temperary movement of Rx and Tx timing for Titanium. Will be set to 0 when new LF is ready.
218 #define rdt 0//359 // rx delta timing
219 #define tdt 0//293 // tx delta timing
220
221 /*------------------------------------------*/
222 /* Download delay values */
223 /*------------------------------------------*/
224 // 0.9230769 usec ~ 1 qbit i.e. 200 usec is ~ 217 qbit
225
226 #define T TPU_CLOCK_RANGE
227
228 #define TRF_I7 334 //qbit
229 #define TRF_I8 378 //qbit
230
231 // time below are offset to when BDLENA goes low
232 #define TRF_R15 ( 0 - DLT_1B) // 0, BDLENA low, needs DLT_1B to execute
233 #define TRF_R13 ( - 32 - DLT_1B) // 8 right after, power off transceiver
234
235 //burst data comes here
236 // time below are offset to when BDLENA goes high
237 #define TRF_R12 (PROVISION_TIME - 0 - DLT_1B) // BDLENA i/q comes 32qbit later
238 #define TRF_R10 (PROVISION_TIME - 8 - DLT_1B) // Set RX/TX switch (not really necessary as the default setting is RX mode)
239 #define TRF_R9 (PROVISION_TIME - 16 - DLT_2B) // RX_ON_CLARA
240 #define TRF_R7 (PROVISION_TIME - 66 - DLT_1B) // 67qbit duration BDLON + BDLCAL
241 #define TRF_R6 (PROVISION_TIME - 83 - DLT_1B) // BDLON, RX_ON_CLARA
242 #define TRF_R5 (PROVISION_TIME - 172 - DLT_2B - rdt) // DC offset comp. start LNA ON
243 //#define TRF_R4 (PROVISION_TIME - 172 - DLT_2B - rdt) // DC offset comp. LNA
244 #define TRF_R3 (PROVISION_TIME - 177 - DLT_2B - rdt) // DC offset comp. GAIN
245 //l1dmacro_adc_read_rx() called here requires ~ 16 tpuinst
246 //#define TRF_R2_1 (PROVISION_TIME - 199 - DLT_2B - rdt) // fc
247 //#define TRF_R2 (PROVISION_TIME - 199 - DLT_2B - rdt) // select band
248 #define TRF_R1 (PROVISION_TIME - 209 - DLT_3B - rdt) // Main PLL + set of Main PLL FC & CP current
249
250
251 // time below are offset to when BULENA goes low
252 #define TRF_T17 ( 32 - SL_SU_DELAY2) // right after, BULON low
253 //#define TRF_T17 ( 32 ) // right after, BULON low
254 #define TRF_T16 ( 26 - DLT_1B) // Power down Clara
255 #define TRF_T15 ( 14 - DLT_1) // disable TX_ON
256 #define TRF_T14 ( 0 - DLT_1B) // BULENA off
257 #define TRF_T13_3 (- 40 - DLT_1B) // ADC read
258 //burst data comes here
259 // time below are offset to when BULENA goes high
260 #define TRF_T13_2 ( 25 - DLT_1) // TX_ON
261 #define TRF_T13_1 ( 17 - DLT_1) // set rf switch
262 #define TRF_T12 (- 0 - DLT_1B) // BULENA Start of TX burst
263 #define TRF_T10 (- 70 - DLT_3B - tdt) // normal speed
264 #define TRF_T9 (- 121 - DLT_2B - tdt) // Power up TXVCO
265 #define TRF_T8 (- 127 - DLT_1B - tdt) // BULON, disable BULCAL
266 #define TRF_T7 (- 127 - DLT_1B - tdt) // 131 BULON, disable BULCAL
267 #define TRF_T6 (- 137 - DLT_3B - tdt) // Speed up
268 #define TRF_T4 (- 249 - DLT_1B - tdt) // prog AUX PLL & detector polarity
269 #define TRF_T3_1 (- 258 - DLT_2B - tdt) // fc
270 #define TRF_T3 (- 258 - DLT_2B - tdt) // 20 BULON + BULCAL + select band
271 #define TRF_T2 (- 267 - DLT_3B - tdt) // set of Main PLL FC & CP current
272 #define TRF_T1 (- 277 - DLT_3B - tdt) // BULON + Main PLL
273
274
275 /*------------------------------------------*/
276 /* Is arfcn in the DCS band (512-885) ? */
277 /*------------------------------------------*/
278 // is working only for GSM and DCS (not PCN)
279 #define IS_DCS_HIGH(arfcn) (((arfcn >= 576) && (arfcn <= 885))? 1 : 0) //Changed by CR 30.08.01, was (((arfcn >= 822) && (arfcn <= 885))? 1 : 0)
280
281 #ifdef TPUDRV10_C
282
283 #endif
284
285