comparison src/cs/services/atp/atp_cmd.h @ 0:4e78acac3d88

src/{condat,cs,gpf,nucleus}: import from Selenite
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 16 Oct 2020 06:23:26 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:4e78acac3d88
1 /********************************************************************************
2 *
3 * File Name : atp_cmd.h
4 *
5 * External definition for commands supported by ATP
6 *
7 * (C) Texas Instruments, all rights reserved
8 *
9 * Version number : 0.1 - 03-03-2000
10 *
11 * History : 0.1 - Created by E. Baissus
12 *
13 * Author : Eric Baissus : e-baissus@ti.com
14 *
15 * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved
16 *
17 ********************************************************************************/
18 #include "rv/rv_general.h"
19 #include "rvf/rvf_api.h"
20 #include "atp/atp_config.h"
21 #include "atp/atp_api.h"
22
23 #include <stdlib.h>
24
25 #ifndef ATP_CMD_H
26 #define ATP_CMD_H
27
28
29 /************************** LOCAL DCE-DTE PORT CONTROL **************************/
30 /* */
31 /* Define the number of word needed to mask the commands executed by the ATP. */
32 #define NB_WORD_OF_DCE_CMD_MASK (0x01)
33
34 /* Define the default command line termination character (See ITU-T */
35 /* Recommendation V.250 ter page 21). */
36 #define ATP_CR_CHARACTER ('\x0D')
37
38 /* Define the default response formatting character (See ITU-T Recommendation */
39 /* V.250 ter page 22). */
40 #define ATP_LF_CHARACTER ('\x0A')
41
42 /* Define the default command line editing character (See ITU-T Recommendation */
43 /* V.250 ter page 22). */
44 #define ATP_BS_CHARACTER ('\x08')
45
46 /* Define the escape sequence (See ITU-T Recommendation V.250 ter page 24). */
47 #define MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE (0x03)
48
49 static const char ATP_ESCAPE_SEQUENCE[] = "+++";
50
51 /* Define the command echo (See ITU-T Recommendation V.250 ter page 23). */
52 typedef enum
53 {
54 ECHO_OFF = 0x00000000,
55 ECHO_ON
56 } T_ATP_ECHO_MODE;
57
58 /* Define the result code suppression (See ITU-T Recommendation V.250 ter page */
59 /* 23). */
60 typedef enum
61 {
62 RESULT_CODE_ON = 0x00000000,
63 RESULT_CODE_OFF
64 } T_ATP_RESULT_CODE_MODE;
65
66 /* Define the DCE response format (See ITU-T Recommendation V.250 ter page 24). */
67 typedef enum
68 {
69 ATP_VERBOSE_0 = 0x00000000,
70 ATP_VERBOSE_1
71 } T_ATP_VERBOSE_MODE;
72
73 /* Define the structure used to store information related to DCE handling. Note */
74 /* that 'nb_plus_received' indicates the number of escape characters that have */
75 /* been previously received (refer to 'escape_sequence_tmp_buffer_p'). */
76 typedef UINT16 T_ATP_DCE_MASK[NB_WORD_OF_DCE_CMD_MASK];
77
78 typedef struct
79 {
80 char cr_character;
81 char lf_character;
82 char bs_character;
83 char escape_sequence[MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE];
84 T_ATP_ECHO_MODE echo_mode;
85 T_ATP_RESULT_CODE_MODE result_code_mode;
86 T_ATP_VERBOSE_MODE verbose_mode;
87 T_ATP_DCE_MASK dce_mask;
88 UINT8 nb_plus_received;
89 UINT8 *escape_sequence_tmp_buffer_p[MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE];
90 UINT8 length_of_escape_sequence_tmp_buffer_p[MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE];
91 } T_ATP_DCE_INFO;
92
93
94 /********************************** AT COMMANDS *********************************/
95 /* */
96 /* Define all supported AT commands. */
97 /* __________________________________________________________________________ */
98 /* | | | | | */
99 /* | Binary code | Len | Command | Description | */
100 /* |___________________|_____|_________|______________________________________| */
101 /* | | | | | */
102 /* | ATP_ATA_NB | 1 | ATA | Answer. | */
103 /* | ATP_ATD_NB | 1 | ATD | Dial. | */
104 /* | ATP_ATE_NB | 1 | ATE | Command echo. | */
105 /* | ATP_ATH_NB | 1 | ATH | Hook control. | */
106 /* | ATP_ATI_NB | 1 | ATI | Request Identification Information | */
107 /* | ATP_ATL_NB | 1 | ATL | Monitor speaker loudness. | */
108 /* | ATP_ATM_NB | 1 | ATM | Monitor speaker mode. | */
109 /* | ATP_ATO_NB | 1 | ATO | Return to online data state. | */
110 /* | ATP_ATP_NB | 1 | ATP | Select pulse dialling. | */
111 /* | ATP_ATQ_NB | 1 | ATQ | Result code suppression. | */
112 /* | ATP_ATS0_NB | 2 | ATS0 | Automatic answer. | */
113 /* | ATP_ATS10_NB | 3 | ATS10 | Automatic disconnect delay. | */
114 /* | ATP_ATS3_NB | 2 | ATS3 | Command line termination character. | */
115 /* | ATP_ATS4_NB | 2 | ATS4 | Response formatting character. | */
116 /* | ATP_ATS5_NB | 2 | ATS5 | Command line editing character. | */
117 /* | ATP_ATS6_NB | 2 | ATS6 | Pause before blind dialling. | */
118 /* | ATP_ATS7_NB | 2 | ATS7 | Connection completion timeout. | */
119 /* | ATP_ATS8_NB | 2 | ATS8 | Comma dial modifier time. | */
120 /* | ATP_ATT_NB | 1 | ATT | Select tone dialling. | */
121 /* | ATP_ATV_NB | 1 | ATV | DCE response format. | */
122 /* | ATP_ATX_NB | 1 | ATX | Result code selection and call | */
123 /* | | | | progress monitoring control. | */
124 /* | ATP_ATZ_NB | 1 | ATZ | Reset to default configuration. | */
125 /* | ATP_AT_AND_C_NB | 2 | AT&C | Circuit 109 (received line signal | */
126 /* | | | | detector) behavior. | */
127 /* | ATP_AT_AND_D_NB | 2 | AT&D | Circuit 108 (data terminal ready) | */
128 /* | | | | behavior. | */
129 /* | ATP_AT_AND_F_NB | 2 | AT&F | Set to factory defined | */
130 /* | | | | configuration. | */
131 /* |___________________|_____|_________|______________________________________| */
132 /* | | | | | */
133 /* |ATP_AT_PLUS_CKPD_NB| 5 | AT+CKPD | Keypad control command (See GSM TS | */
134 /* | | | | 07.07, Section 8.7). For <keys>, the | */
135 /* | | | | value of 200 indicates the button on | */
136 /* | | | | the headset being pushed. The <time> | */
137 /* | | | | and <pause> parameters have no | */
138 /* | | | | meaning in the headset profile. | */
139 /* |ATP_AT_PLUS_FDR_NB | 4 | AT+FDR | Receive a page. | */
140 /* |ATP_AT_PLUS_FDT_NB | 4 | AT+FDT | Send a page. | */
141 /* |ATP_AT_PLUS_FKS_NB | 4 | AT+FKS | Session termination. | */
142 /* |ATP_AT_PLUS_GMI_NB | 4 | AT+GMI | Request manufacturer identification. | */
143 /* |ATP_AT_PLUS_GMM_NB | 4 | AT+GMM | Request model identification. | */
144 /* |ATP_AT_PLUS_GMR_NB | 4 | AT+GMR | Request revision identification. | */
145 /* |ATP_AT_PLUS_GCAP_NB| 5 | AT+GCAP | Request complete capabilities list. | */
146 /* |ATP_AT_PLUS_VGM_NB | 4 | AT+VGM | Command issued by the HS to report | */
147 /* | | | | the current microphone gain level | */
148 /* | | | | setting to the AG (See Headset | */
149 /* | | | | Specification, Section 4.7.3). | */
150 /* |ATP_AT_PLUS_VGS_NB | 4 | AT+VGS | Command issued by the HS to report | */
151 /* | | | | the current speaker gain level | */
152 /* | | | | setting to the AG (See Headset | */
153 /* | | | | Specification, Section 4.7.3). | */
154 /* |___________________|_____|_________|______________________________________| */
155 /* */
156 /* Define the command line prefix "AT" (See ITU-T Recommendation V.250 ter page */
157 /* page 4). */
158 #define ATP_AT_PREFIX ("AT")
159 #define ATP_AT_PREFIX_LEN (0x02)
160
161 /* Text codes for AT commands. */
162 static const char ATP_AT_TXT_TABLE[] = {'A', \
163 'D', \
164 'E', \
165 'H', \
166 'I', \
167 'L', \
168 'M', \
169 'O', \
170 'P', \
171 'Q', \
172 'S', '0', \
173 'S', '1', '0', \
174 'S', '3', \
175 'S', '4', \
176 'S', '5', \
177 'S', '6', \
178 'S', '7', \
179 'S', '8', \
180 'T', \
181 'V', \
182 'X', \
183 'Z', \
184 '&', 'C', \
185 '&', 'D', \
186 '&', 'F', \
187 '+', 'C', 'K', 'P', 'D', \
188 '+', 'F', 'D', 'R', \
189 '+', 'F', 'D', 'T', \
190 '+', 'F', 'K', 'S', \
191 '+', 'G', 'M', 'I', \
192 '+', 'G', 'M', 'M', \
193 '+', 'G', 'M', 'R', \
194 '+', 'G', 'C', 'A', 'P', \
195 '+', 'V', 'G', 'M', \
196 '+', 'V', 'G', 'S', \
197 '\xFF'};
198
199 /* Binary related codes. */
200 typedef enum
201 {
202 ATP_ATA_NB = (0x00000000),
203 ATP_ATD_NB,
204 ATP_ATE_NB,
205 ATP_ATH_NB,
206 ATP_ATI_NB,
207 ATP_ATL_NB,
208 ATP_ATM_NB,
209 ATP_ATO_NB,
210 ATP_ATP_NB,
211 ATP_ATQ_NB,
212 ATP_ATS0_NB,
213 ATP_ATS10_NB,
214 ATP_ATS3_NB,
215 ATP_ATS4_NB,
216 ATP_ATS5_NB,
217 ATP_ATS6_NB,
218 ATP_ATS7_NB,
219 ATP_ATS8_NB,
220 ATP_ATT_NB,
221 ATP_ATV_NB,
222 ATP_ATX_NB,
223 ATP_ATZ_NB,
224 ATP_AT_AND_C_NB,
225 ATP_AT_AND_D_NB,
226 ATP_AT_AND_F_NB,
227 ATP_AT_PLUS_CKPD_NB,
228 ATP_AT_PLUS_FDR_NB,
229 ATP_AT_PLUS_FDT_NB,
230 ATP_AT_PLUS_FKS_NB,
231 ATP_AT_PLUS_GMI_NB,
232 ATP_AT_PLUS_GMM_NB,
233 ATP_AT_PLUS_GMR_NB,
234 ATP_AT_PLUS_GCAP_NB,
235 ATP_AT_PLUS_VGM_NB,
236 ATP_AT_PLUS_VGS_NB,
237 ATP_MAX_NB_OF_AT_COMMANDS
238 } T_ATP_BINARY_AT_COMMANDS;
239
240 /* Related offsets. */
241 #define ATP_ATA_OFFSET (0x00)
242 #define ATP_ATD_OFFSET (ATP_ATA_OFFSET + 0x01)
243 #define ATP_ATE_OFFSET (ATP_ATD_OFFSET + 0x01)
244 #define ATP_ATH_OFFSET (ATP_ATE_OFFSET + 0x01)
245 #define ATP_ATI_OFFSET (ATP_ATH_OFFSET + 0x01)
246 #define ATP_ATL_OFFSET (ATP_ATI_OFFSET + 0x01)
247 #define ATP_ATM_OFFSET (ATP_ATL_OFFSET + 0x01)
248 #define ATP_ATO_OFFSET (ATP_ATM_OFFSET + 0x01)
249 #define ATP_ATP_OFFSET (ATP_ATO_OFFSET + 0x01)
250 #define ATP_ATQ_OFFSET (ATP_ATP_OFFSET + 0x01)
251 #define ATP_ATS0_OFFSET (ATP_ATQ_OFFSET + 0x01)
252 #define ATP_ATS10_OFFSET (ATP_ATS0_OFFSET + 0x02)
253 #define ATP_ATS3_OFFSET (ATP_ATS10_OFFSET + 0x03)
254 #define ATP_ATS4_OFFSET (ATP_ATS3_OFFSET + 0x02)
255 #define ATP_ATS5_OFFSET (ATP_ATS4_OFFSET + 0x02)
256 #define ATP_ATS6_OFFSET (ATP_ATS5_OFFSET + 0x02)
257 #define ATP_ATS7_OFFSET (ATP_ATS6_OFFSET + 0x02)
258 #define ATP_ATS8_OFFSET (ATP_ATS7_OFFSET + 0x02)
259 #define ATP_ATT_OFFSET (ATP_ATS8_OFFSET + 0x02)
260 #define ATP_ATV_OFFSET (ATP_ATT_OFFSET + 0x01)
261 #define ATP_ATX_OFFSET (ATP_ATV_OFFSET + 0x01)
262 #define ATP_ATZ_OFFSET (ATP_ATX_OFFSET + 0x01)
263 #define ATP_AT_AND_C_OFFSET (ATP_ATZ_OFFSET + 0x01)
264 #define ATP_AT_AND_D_OFFSET (ATP_AT_AND_C_OFFSET + 0x02)
265 #define ATP_AT_AND_F_OFFSET (ATP_AT_AND_D_OFFSET + 0x02)
266 #define ATP_AT_PLUS_CKPD_OFFSET (ATP_AT_AND_F_OFFSET + 0x02)
267 #define ATP_AT_PLUS_FDR_OFFSET (ATP_AT_PLUS_CKPD_OFFSET + 0x05)
268 #define ATP_AT_PLUS_FDT_OFFSET (ATP_AT_PLUS_FDR_OFFSET + 0x04)
269 #define ATP_AT_PLUS_FKS_OFFSET (ATP_AT_PLUS_FDT_OFFSET + 0x04)
270 #define ATP_AT_PLUS_GMI_OFFSET (ATP_AT_PLUS_FKS_OFFSET + 0x04)
271 #define ATP_AT_PLUS_GMM_OFFSET (ATP_AT_PLUS_GMI_OFFSET + 0x04)
272 #define ATP_AT_PLUS_GMR_OFFSET (ATP_AT_PLUS_GMM_OFFSET + 0x04)
273 #define ATP_AT_PLUS_GCAP_OFFSET (ATP_AT_PLUS_GMR_OFFSET + 0x04)
274 #define ATP_AT_PLUS_VGM_OFFSET (ATP_AT_PLUS_GCAP_OFFSET + 0x05)
275 #define ATP_AT_PLUS_VGS_OFFSET (ATP_AT_PLUS_VGM_OFFSET + 0x04)
276 #define ATP_AT_LAST_OFFSET (ATP_AT_PLUS_VGS_OFFSET + 0x04)
277
278 /* Related structures. */
279 typedef enum
280 {
281 ATP_CMD_NOT_DEFINED = (0x00000000),
282 ATP_NO_PARAM,
283 ATP_BASIC_PARAM,
284 ATP_DIAL_PARAM,
285 ATP_S_PARAM,
286 ATP_NO_EXTENDED_PARAM,
287 ATP_SINGLE_EXTENDED_PARAM,
288 ATP_PLUS_CKPD_PARAM
289 } T_ATP_CMD_FORMAT;
290
291 #define ATP_ATA_PARAM (ATP_NO_PARAM)
292 #define ATP_ATD_PARAM (ATP_DIAL_PARAM)
293 #define ATP_ATE_PARAM (ATP_BASIC_PARAM)
294 #define ATP_ATH_PARAM (ATP_BASIC_PARAM)
295 #define ATP_ATI_PARAM (ATP_BASIC_PARAM)
296 #define ATP_ATL_PARAM (ATP_BASIC_PARAM)
297 #define ATP_ATM_PARAM (ATP_BASIC_PARAM)
298 #define ATP_ATO_PARAM (ATP_BASIC_PARAM)
299 #define ATP_ATP_PARAM (ATP_NO_PARAM)
300 #define ATP_ATQ_PARAM (ATP_BASIC_PARAM)
301 #define ATP_ATS0_PARAM (ATP_S_PARAM)
302 #define ATP_ATS10_PARAM (ATP_S_PARAM)
303 #define ATP_ATS3_PARAM (ATP_S_PARAM)
304 #define ATP_ATS4_PARAM (ATP_S_PARAM)
305 #define ATP_ATS5_PARAM (ATP_S_PARAM)
306 #define ATP_ATS6_PARAM (ATP_S_PARAM)
307 #define ATP_ATS7_PARAM (ATP_S_PARAM)
308 #define ATP_ATS8_PARAM (ATP_S_PARAM)
309 #define ATP_ATT_PARAM (ATP_NO_PARAM)
310 #define ATP_ATV_PARAM (ATP_BASIC_PARAM)
311 #define ATP_ATX_PARAM (ATP_BASIC_PARAM)
312 #define ATP_ATZ_PARAM (ATP_BASIC_PARAM)
313 #define ATP_AT_AND_C_PARAM (ATP_BASIC_PARAM)
314 #define ATP_AT_AND_D_PARAM (ATP_BASIC_PARAM)
315 #define ATP_AT_AND_F_PARAM (ATP_BASIC_PARAM)
316 #define ATP_AT_PLUS_CKPD_PARAM (ATP_PLUS_CKPD_PARAM)
317 #define ATP_AT_PLUS_FDR_PARAM (ATP_NO_EXTENDED_PARAM)
318 #define ATP_AT_PLUS_FDT_PARAM (ATP_NO_EXTENDED_PARAM)
319 #define ATP_AT_PLUS_FKS_PARAM (ATP_NO_EXTENDED_PARAM)
320 #define ATP_AT_PLUS_GMI_PARAM (ATP_NO_EXTENDED_PARAM)
321 #define ATP_AT_PLUS_GMM_PARAM (ATP_NO_EXTENDED_PARAM)
322 #define ATP_AT_PLUS_GMR_PARAM (ATP_NO_EXTENDED_PARAM)
323 #define ATP_AT_PLUS_GCAP_PARAM (ATP_NO_EXTENDED_PARAM)
324 #define ATP_AT_PLUS_VGM_PARAM (ATP_SINGLE_EXTENDED_PARAM)
325 #define ATP_AT_PLUS_VGS_PARAM (ATP_SINGLE_EXTENDED_PARAM)
326
327 #define ATP_AT_OFFSET_COLUMN (0x00)
328 #define ATP_AT_PARAM_COLUMN (0x01)
329
330 static const UINT8 ATP_AT_INFO[ATP_MAX_NB_OF_AT_COMMANDS + 0x01][0x02] \
331 = {{ATP_ATA_OFFSET, ATP_ATA_PARAM}, \
332 {ATP_ATD_OFFSET, ATP_ATD_PARAM}, \
333 {ATP_ATE_OFFSET, ATP_ATE_PARAM}, \
334 {ATP_ATH_OFFSET, ATP_ATH_PARAM}, \
335 {ATP_ATI_OFFSET, ATP_ATI_PARAM}, \
336 {ATP_ATL_OFFSET, ATP_ATL_PARAM}, \
337 {ATP_ATM_OFFSET, ATP_ATM_PARAM}, \
338 {ATP_ATO_OFFSET, ATP_ATO_PARAM}, \
339 {ATP_ATP_OFFSET, ATP_ATP_PARAM}, \
340 {ATP_ATQ_OFFSET, ATP_ATQ_PARAM}, \
341 {ATP_ATS0_OFFSET, ATP_ATS0_PARAM}, \
342 {ATP_ATS10_OFFSET, ATP_ATS10_PARAM}, \
343 {ATP_ATS3_OFFSET, ATP_ATS3_PARAM}, \
344 {ATP_ATS4_OFFSET, ATP_ATS4_PARAM}, \
345 {ATP_ATS5_OFFSET, ATP_ATS5_PARAM}, \
346 {ATP_ATS6_OFFSET, ATP_ATS6_PARAM}, \
347 {ATP_ATS7_OFFSET, ATP_ATS7_PARAM}, \
348 {ATP_ATS8_OFFSET, ATP_ATS8_PARAM}, \
349 {ATP_ATT_OFFSET, ATP_ATT_PARAM}, \
350 {ATP_ATV_OFFSET, ATP_ATV_PARAM}, \
351 {ATP_ATX_OFFSET, ATP_ATX_PARAM}, \
352 {ATP_ATZ_OFFSET, ATP_ATZ_PARAM}, \
353 {ATP_AT_AND_C_OFFSET, ATP_AT_AND_C_PARAM}, \
354 {ATP_AT_AND_D_OFFSET, ATP_AT_AND_D_PARAM}, \
355 {ATP_AT_AND_F_OFFSET, ATP_AT_AND_F_PARAM}, \
356 {ATP_AT_PLUS_CKPD_OFFSET, ATP_AT_PLUS_CKPD_PARAM}, \
357 {ATP_AT_PLUS_FDR_OFFSET, ATP_AT_PLUS_FDR_PARAM}, \
358 {ATP_AT_PLUS_FDT_OFFSET, ATP_AT_PLUS_FDT_PARAM}, \
359 {ATP_AT_PLUS_FKS_OFFSET, ATP_AT_PLUS_FKS_PARAM}, \
360 {ATP_AT_PLUS_GMI_OFFSET, ATP_AT_PLUS_GMI_PARAM}, \
361 {ATP_AT_PLUS_GMM_OFFSET, ATP_AT_PLUS_GMM_PARAM}, \
362 {ATP_AT_PLUS_GMR_OFFSET, ATP_AT_PLUS_GMR_PARAM}, \
363 {ATP_AT_PLUS_GCAP_OFFSET, ATP_AT_PLUS_GCAP_PARAM}, \
364 {ATP_AT_PLUS_VGM_OFFSET, ATP_AT_PLUS_VGM_PARAM}, \
365 {ATP_AT_PLUS_VGS_OFFSET, ATP_AT_PLUS_VGS_PARAM}, \
366 {ATP_AT_LAST_OFFSET, ATP_CMD_NOT_DEFINED}};
367
368 /* Define the maximum length (text format) of <numbers> appearing in basic */
369 /* syntax commands. */
370 /* - <number> (up to 65535). */
371 #define MAX_BASIC_CMD_PARAM_LEN (0x05)
372
373 /* Define the structure associated with basic syntax commands (except for the */
374 /* D and S commands). The format of such commands is <command>[<number>], where */
375 /* <number> may be a string of one or more characters from "0" through "9" */
376 /* representing the decimal integer value (See ITU-T Recommendation V.250 ter */
377 /* page 5). */
378 typedef struct
379 {
380 UINT16 number;
381 } T_ATP_BASIC_CMD;
382
383 /* Define all basic syntax commands do not expext any <number>. */
384 /* __________________________________________________________________________ */
385 /* | | | | | */
386 /* | Binary code | Len | Command | Description | */
387 /* |___________________|_____|_________|______________________________________| */
388 /* | | | | | */
389 /* | ATP_ATA_NB | 1 | ATA | Answer. | */
390 /* | ATP_ATP_NB | 1 | ATP | Select pulse dialling. | */
391 /* | ATP_ATT_NB | 1 | ATT | Select tone dialling. | */
392 /* |___________________|_____|_________|______________________________________| */
393 /* */
394 /* Define all other basic syntax commands. */
395 /* __________________________________________________________________________ */
396 /* | | | | | */
397 /* | Binary code | Len | Command | Description | */
398 /* |___________________|_____|_________|______________________________________| */
399 /* | | | | | */
400 /* | ATP_ATE_NB | 1 | ATE | Command echo. | */
401 /* | ATP_ATH_NB | 1 | ATH | Hook control. | */
402 /* | ATP_ATI_NB | 1 | ATI | Request Identification Information | */
403 /* | ATP_ATL_NB | 1 | ATL | Monitor speaker loudness. | */
404 /* | ATP_ATM_NB | 1 | ATM | Monitor speaker mode. | */
405 /* | ATP_ATO_NB | 1 | ATO | Return to online data state. | */
406 /* | ATP_ATQ_NB | 1 | ATQ | Result code suppression. | */
407 /* | ATP_ATV_NB | 1 | ATV | DCE response format. | */
408 /* | ATP_ATX_NB | 1 | ATX | Result code selection and call | */
409 /* | | | | progress monitoring control. | */
410 /* | ATP_ATZ_NB | 1 | ATZ | Reset to default configuration. | */
411 /* | ATP_AT_AND_C_NB | 2 | AT&C | Circuit 109 (received line signal | */
412 /* | | | | detector) behavior. | */
413 /* | ATP_AT_AND_D_NB | 2 | AT&D | Circuit 108 (data terminal ready) | */
414 /* | | | | behavior. | */
415 /* | ATP_AT_AND_F_NB | 2 | AT&F | Set to factory defined | */
416 /* | | | | configuration. | */
417 /* |___________________|_____|_________|______________________________________| */
418 typedef T_ATP_BASIC_CMD T_ATP_ATE_PARAM;
419 typedef T_ATP_BASIC_CMD T_ATP_ATH_PARAM;
420 typedef T_ATP_BASIC_CMD T_ATP_ATI_PARAM;
421 typedef T_ATP_BASIC_CMD T_ATP_ATL_PARAM;
422 typedef T_ATP_BASIC_CMD T_ATP_ATM_PARAM;
423 typedef T_ATP_BASIC_CMD T_ATP_ATO_PARAM;
424 typedef T_ATP_BASIC_CMD T_ATP_ATQ_PARAM;
425 typedef T_ATP_BASIC_CMD T_ATP_ATV_PARAM;
426 typedef T_ATP_BASIC_CMD T_ATP_ATX_PARAM;
427 typedef T_ATP_BASIC_CMD T_ATP_ATZ_PARAM;
428 typedef T_ATP_BASIC_CMD T_ATP_AT_AND_C_PARAM;
429 typedef T_ATP_BASIC_CMD T_ATP_AT_AND_D_PARAM;
430 typedef T_ATP_BASIC_CMD T_ATP_AT_AND_F_PARAM;
431
432 /* Define the maximum number of characters appearing in the <dial_string>. */
433 #define MAX_DIAL_STRING_LEN (30)
434
435 /* Define the structure associated with "Dial" command whose format is */
436 /* D[<dial_string>][;] (See ITU-T Recommendation V.250 ter page 31). Note that */
437 /* all characters appearing on the same command line after D are considered */
438 /* part of the call addressing information to be signalled to the network, or */
439 /* modifiers used to control the signalling process, up to a semicolon */
440 /* character or the end of the command line. If the <dial_string> is terminated */
441 /* by a semicolon, the DCE does not start the call origination procedure, but */
442 /* instead returns to command state after completion of the signalling of call */
443 /* addressing information to the network. */
444 typedef struct
445 {
446 char dial_string_p[MAX_DIAL_STRING_LEN];
447 UINT8 dial_string_length;
448 enum
449 {
450 DATA_CALL = 0x00000000,
451 VOICE_CALL
452 } call_type;
453 } T_ATP_DIAL;
454
455 /* Define all dial commands. */
456 /* __________________________________________________________________________ */
457 /* | | | | | */
458 /* | Binary code | Len | Command | Description | */
459 /* |___________________|_____|_________|______________________________________| */
460 /* | | | | | */
461 /* | ATP_ATD_NB | 1 | ATD | Dial. | */
462 /* |___________________|_____|_________|______________________________________| */
463 typedef T_ATP_DIAL T_ATP_ATD_PARAM;
464
465 /* Define the maximum length (text format) of <values> appearing in */
466 /* S-parameters. */
467 /* - '=' + <value> (up to 65535). */
468 #define MAX_S_PARAM_LEN (0x06)
469
470 /* Define the structure associated with S-parameters. Formats of such commands */
471 /* are S<parameter_number>? and S<parameter_number>=[<value>], where <value> */
472 /* shall consist of a decimal constant (See ITU-T Recommendation V.250 ter */
473 /* pages 5 and 6). */
474 typedef struct
475 {
476 enum
477 {
478 READ_S_PARAM = 0x00000001,
479 SET_S_PARAM
480 } s_operator;
481 UINT16 value;
482 } T_ATP_S_PARAM;
483
484 /* Define all S-parameters. */
485 /* __________________________________________________________________________ */
486 /* | | | | | */
487 /* | Binary code | Len | Command | Description | */
488 /* |___________________|_____|_________|______________________________________| */
489 /* | | | | | */
490 /* | ATP_ATS0_NB | 2 | ATS0 | Automatic answer. | */
491 /* | ATP_ATS10_NB | 3 | ATS10 | Automatic disconnect delay. | */
492 /* | ATP_ATS3_NB | 2 | ATS3 | Command line termination character. | */
493 /* | ATP_ATS4_NB | 2 | ATS4 | Response formatting character. | */
494 /* | ATP_ATS5_NB | 2 | ATS5 | Command line editing character. | */
495 /* | ATP_ATS6_NB | 2 | ATS6 | Pause before blind dialling. | */
496 /* | ATP_ATS7_NB | 2 | ATS7 | Connection completion timeout. | */
497 /* | ATP_ATS8_NB | 2 | ATS8 | Comma dial modifier time. | */
498 /* |___________________|_____|_________|______________________________________| */
499 typedef T_ATP_S_PARAM T_ATP_ATS0_PARAM;
500 typedef T_ATP_S_PARAM T_ATP_ATS10_PARAM;
501 typedef T_ATP_S_PARAM T_ATP_ATS3_PARAM;
502 typedef T_ATP_S_PARAM T_ATP_ATS4_PARAM;
503 typedef T_ATP_S_PARAM T_ATP_ATS5_PARAM;
504 typedef T_ATP_S_PARAM T_ATP_ATS6_PARAM;
505 typedef T_ATP_S_PARAM T_ATP_ATS7_PARAM;
506 typedef T_ATP_S_PARAM T_ATP_ATS8_PARAM;
507
508 /* Define operators dedicated to extended syntax commands. "=" is used to set */
509 /* the indicated extended syntax command to a new value (See ITU-T */
510 /* Recommendation V.250 ter page 8). Note that if no value is given, the */
511 /* extended syntax command specified may be set to 0. "?" is used to read the */
512 /* current value of the indicated extended syntax command (See ITU-T */
513 /* Recommendation V.250 ter page 9). "=?" is used to test whether the extended */
514 /* syntax command is implemented in the DCE. */
515 typedef enum
516 {
517 NO_SUBPARAMETER = 0x00000000,
518 READ_EXTENDED_CMD,
519 SET_EXTENDED_CMD,
520 TEST_EXTENDED_CMD
521 } T_ATP_EXTENDED_OPERATOR;
522
523 /* Define the maximum length (text format) of extended syntax commands that */
524 /* have no subparameter. */
525 /* - '=?'. */
526 #define MAX_NO_SUBPARAMETER_LEN (0x02)
527
528 /* Define the structure associated with extended syntax commands that have no */
529 /* subparameter. Formats of such commands are +<name> and +<name>=?, where */
530 /* <name> may be a string of one or sixteen characters selected from the */
531 /* following set (See ITU-T Recommendation V.250 ter page 6): */
532 /* "A" through "Z", */
533 /* "0" through "9", */
534 /* "!", "%", "-", ".", "/", ":" and "_". */
535 typedef struct
536 {
537 T_ATP_EXTENDED_OPERATOR extended_operator;
538 } T_ATP_NO_SUBPARAMETER;
539
540 /* Define all extended syntax commands do not expext any <value>. */
541 /* __________________________________________________________________________ */
542 /* | | | | | */
543 /* | Binary code | Len | Command | Description | */
544 /* |___________________|_____|_________|______________________________________| */
545 /* | | | | | */
546 /* |ATP_AT_PLUS_FDR_NB | 4 | AT+FDR | Receive a page. | */
547 /* |ATP_AT_PLUS_FDT_NB | 4 | AT+FDT | Send a page. | */
548 /* |ATP_AT_PLUS_FKS_NB | 4 | AT+FKS | Session termination. | */
549 /* |ATP_AT_PLUS_GMI_NB | 4 | AT+GMI | Request manufacturer identification. | */
550 /* |ATP_AT_PLUS_GMM_NB | 4 | AT+GMM | Request model identification. | */
551 /* |ATP_AT_PLUS_GMR_NB | 4 | AT+GMR | Request revision identification. | */
552 /* |ATP_AT_PLUS_GCAP_NB| 5 | AT+GCAP | Request complete capabilities list. | */
553 /* |___________________|_____|_________|______________________________________| */
554 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_FDR_PARAM;
555 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_FDT_PARAM;
556 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_FKS_PARAM;
557 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_GMI_PARAM;
558 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_GMM_PARAM;
559 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_GMR_PARAM;
560 typedef T_ATP_NO_SUBPARAMETER T_ATP_AT_PLUS_GCAP_PARAM;
561
562 /* Define the maximum length (text format) of <values> appearing in extended */
563 /* syntax commands whose subparameter is a numeric constant. */
564 /* - '=' + <value> (up to 65535). */
565 #define MAX_SINGLE_SUBPARAMETER_LEN (0x06)
566
567 /* Define the structure associated with extended syntax commands whose */
568 /* subparameter is a numeric constant. Formats of such commands are +<name>?, */
569 /* +<name>[=<value>] and and +<name>=?, where <name> may be a string of one or */
570 /* sixteen characters selected from the following set (See ITU-T Recommendation */
571 /* V.250 ter page 6): */
572 /* "A" through "Z", */
573 /* "0" through "9", */
574 /* "!", "%", "-", ".", "/", ":" and "_". */
575 /* */
576 /* <value> shall consist of a numeric constant (See ITU-T Recommendation V.250 */
577 /* ter page 6). */
578 /* Some additional commands may follow an extended syntax command on the same */
579 /* command line if a semicolon is inserted after the preceding extended command */
580 /* as a separator. The semicolon is not necessary when the extended syntax */
581 /* command is the last command on the command line (See ITU-T Recommendation */
582 /* V.250 ter page 9). Besides, extended syntax commands may appear on the same */
583 /* command line after a basic syntax command without a separator, in the same */
584 /* manner as concatenation of basic syntax commands. */
585 typedef struct
586 {
587 T_ATP_EXTENDED_OPERATOR extended_operator;
588 UINT16 value;
589 } T_ATP_SINGLE_SUBPARAMETER;
590
591 /* Define all extended syntax commands whose subparameter is a numeric */
592 /* constant. */
593 /* __________________________________________________________________________ */
594 /* | | | | | */
595 /* | Binary code | Len | Command | Description | */
596 /* |___________________|_____|_________|______________________________________| */
597 /* | | | | meaning in the headset profile. | */
598 /* |ATP_AT_PLUS_VGM_NB | 4 | AT+VGM | Command issued by the HS to report | */
599 /* | | | | the current microphone gain level | */
600 /* | | | | setting to the AG (See Headset | */
601 /* | | | | Specification, Section 4.7.3). | */
602 /* |ATP_AT_PLUS_VGS_NB | 4 | AT+VGS | Command issued by the HS to report | */
603 /* | | | | the current speaker gain level | */
604 /* | | | | setting to the AG (See Headset | */
605 /* | | | | Specification, Section 4.7.3). | */
606 /* |___________________|_____|_________|______________________________________| */
607 typedef T_ATP_SINGLE_SUBPARAMETER T_ATP_AT_PLUS_VGM_PARAM;
608 typedef T_ATP_SINGLE_SUBPARAMETER T_ATP_AT_PLUS_VGS_PARAM;
609
610 /* Define the maximum number of keys appearing in the <keys>. */
611 #define MAX_NB_OF_KEYS (5)
612
613 /* Define the maximum length (text format) of the <compound_value> appearing in */
614 /* keypad control commands. */
615 /* - "=" + """ + MAX_NB_OF_KEYS * [";" + <keys> (up to 65535) + ";"] + """ + */
616 /* + "," + <time> (up to 65535) */
617 /* + "," + <pause> (up to 65535). */
618 #define MAX_CKPD_PARAM_LEN (0x0F + MAX_NB_OF_KEYS * 0x07)
619
620 /* Define the structure associated with the extended syntax command +CKPD. */
621 /* Formats of such command are +<name>=<keys>[,<time>[,<pause>]] and +<name>=?, */
622 /* where <name> may be a string of one or sixteen characters selected from the */
623 /* following set (See ITU-T Recommendation V.250 ter page 6): */
624 /* "A" through "Z", */
625 /* "0" through "9", */
626 /* "!", "%", "-", ".", "/", ":" and "_". */
627 /* */
628 /* <keys> shall consist of a string constant (See ETS 300 916 (GSM 07.07) */
629 /* Version 5.8.1 page 62). */
630 /* <time> and <pause> shall consist of numeric constants in tenths of a second */
631 /* (See ETS 300 916 (GSM 07.07) Version 5.8.1 page 62). */
632 /* Some additional commands may follow an extended syntax command on the same */
633 /* command line if a semicolon is inserted after the preceding extended command */
634 /* as a separator. The semicolon is not necessary when the extended syntax */
635 /* command is the last command on the command line (See ITU-T Recommendation */
636 /* V.250 ter page 9). Besides, extended syntax commands may appear on the same */
637 /* command line after a basic syntax command without a separator, in the same */
638 /* manner as concatenation of basic syntax commands. */
639 typedef struct
640 {
641 T_ATP_EXTENDED_OPERATOR extended_operator;
642 UINT16 keys[MAX_NB_OF_KEYS];
643 UINT8 nb_keys;
644 UINT16 time;
645 UINT16 pause;
646 } T_ATP_PLUS_CKPD;
647
648 /* Define all extended syntax commands. */
649 /* __________________________________________________________________________ */
650 /* | | | | | */
651 /* | Binary code | Len | Command | Description | */
652 /* |___________________|_____|_________|______________________________________| */
653 /* | | | | | */
654 /* |ATP_AT_PLUS_CKPD_NB| 5 | AT+CKPD | Keypad control command (See GSM TS | */
655 /* | | | | 07.07, Section 8.7). For <keys>, the | */
656 /* | | | | value of 200 indicates the button on | */
657 /* | | | | the headset being pushed. The <time> | */
658 /* | | | | and <pause> parameters have no | */
659 /* | | | | meaning in the headset profile. | */
660 /* |___________________|_____|_________|______________________________________| */
661 typedef T_ATP_PLUS_CKPD T_ATP_AT_PLUS_CKPD_PARAM;
662
663 /* Define the default time value. */
664 #define DEFAULT_TIME (0x0000)
665
666 /* Define an unspecified time value. */
667 #define TIME_DO_NOT_CARE (0x0000)
668
669 /* Define the default pause value. */
670 #define DEFAULT_PAUSE (0x0000)
671
672 /* Define an unspecified pause value. */
673 #define PAUSE_DO_NOT_CARE (0x0000)
674
675
676 /********************************* RESULT CODES *********************************/
677 /* */
678 /* Define all supported result codes. */
679 /* */
680 /* __________________________________________________________________________ */
681 /* | | | | | | */
682 /* | Binary code | Len | Result code | Numeric | Description | */
683 /* |_____________________|_____|_____________|_________|______________________| */
684 /* | | | | | | */
685 /* | ATP_OK_NB | 2 | OK | 0 | Acknoledges | */
686 /* | | | | | execution of a | */
687 /* | | | | | command. | */
688 /* | ATP_CONNECT_NB | 7 | CONNECT | 1 | A connection has | */
689 /* | | | | | been established. | */
690 /* | ATP_RING_NB | 4 | RING | 2 | Incoming call | */
691 /* | | | | | detected. | */
692 /* | ATP_NO_CARRIER_NB | 10 | NO CARRIER | 3 | The connection has | */
693 /* | | | | | been terminated or | */
694 /* | | | | | the attempt to | */
695 /* | | | | | establish a | */
696 /* | | | | | connection failed. | */
697 /* | ATP_ERROR_NB | 5 | ERROR | 4 | Problem with | */
698 /* | | | | | processing the | */
699 /* | | | | | command line. | */
700 /* | ATP_NO_DIALTONE_NB | 11 | NO DIALTONE | 6 | No dial tone | */
701 /* | | | | | detected. | */
702 /* | ATP_BUSY_NB | 4 | BUSY | 7 | Busy signal | */
703 /* | | | | | detected. | */
704 /* | ATP_NO_ANSWER_NB | 9 | NO ANSWER | 8 | '@' dial modifier | */
705 /* | | | | | was used, but remote | */
706 /* | | | | | ringing followed by | */
707 /* | | | | | 5 seconds of silence | */
708 /* | | | | | was not detected | */
709 /* | | | | | before expiration of | */
710 /* | | | | | the connection | */
711 /* | | | | | timer. | */
712 /* |_____________________|_____|_____________|_________|______________________| */
713 /* | | | | | | */
714 /* | ATP_CONNECT_TXT_NB | 7 | CONNECT | X | A connection has | */
715 /* | | | | | been established. | */
716 /* |_____________________|_____|_____________|_________|______________________| */
717 /* | | | | | | */
718 /* | ATP_PLUS_VGM_NB | 4 | +VGM | X | Unsolicited result | */
719 /* | | | | | code issued by the | */
720 /* | | | | | AG to set the | */
721 /* | | | | | microphone gain of | */
722 /* | | | | | the HS (See Headset | */
723 /* | | | | | Specification, | */
724 /* | | | | | Section 4.7.3). | */
725 /* | ATP_PLUS_VGS_NB | 4 | +VGS | X | Unsolicited result | */
726 /* | | | | | code issued by the | */
727 /* | | | | | AG to set the | */
728 /* | | | | | speaker gain of the | */
729 /* | | | | | HS (See Headset | */
730 /* | | | | | Specification, | */
731 /* | | | | | Section 4.7.3). | */
732 /* |_____________________|_____|_____________|_________|______________________| */
733 /* | | | | | | */
734 /* |ATP_PLUS_CME_ERROR_NB| 11 | +CME ERROR: | X | Final result code | */
735 /* | | | | | similar to the | */
736 /* | | | | | regular ERROR result | */
737 /* | | | | | code (See GSM TS | */
738 /* | | | | | 07.07, Section 9.2). | */
739 /* |_____________________|_____|_____________|_________|______________________| */
740 /* | | | | | | */
741 /* |ATP_PLUS_CMS_ERROR_NB| 11 | +CMS ERROR: | X | Final result code | */
742 /* | | | | | that indicates an | */
743 /* | | | | | error related to | */
744 /* | | | | | mobile equipment or | */
745 /* | | | | | network (See GSM TS | */
746 /* | | | | | 07.05, Section | */
747 /* | | | | | 3.2.5). | */
748 /* |_____________________|_____|_____________|_________|______________________| */
749 /* */
750 /* Define the length of <CR><LF> headers of information responses (See ETS 300 */
751 /* 916 (GSM 07.07) Version 4.1 page 13). */
752 #define ATP_RESULT_CODE_HEADER_LEN (0x02)
753
754 /* Text codes for result codes (verbose responses disabled). */
755 static const char ATP_RESULT_CODE_TXT_TABLE_V0[] = {'0', \
756 '1', \
757 '2', \
758 '3', \
759 '4', \
760 '6', \
761 '7', \
762 '8', \
763 'C', 'O', 'N', 'N', 'E', 'C', 'T', \
764 '+', 'V', 'G', 'M', \
765 '+', 'V', 'G', 'S', \
766 '+', 'C', 'M', 'E', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
767 '+', 'C', 'M', 'S', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
768 '\xFF'};
769
770 /* Text codes for result codes (verbose responses enabled). */
771 static const char ATP_RESULT_CODE_TXT_TABLE_V1[] = {'O', 'K', \
772 'C', 'O', 'N', 'N', 'E', 'C', 'T', \
773 'R', 'I', 'N', 'G', \
774 'N', 'O', ' ', 'C', 'A', 'R', 'R', 'I', 'E', 'R', \
775 'E', 'R', 'R', 'O', 'R', \
776 'N', 'O', ' ', 'D', 'I', 'A', 'L', 'T', 'O', 'N', 'E', \
777 'B', 'U', 'S', 'Y', \
778 'N', 'O', ' ', 'A', 'N', 'S', 'W', 'E', 'R', \
779 'C', 'O', 'N', 'N', 'E', 'C', 'T', \
780 '+', 'V', 'G', 'M', \
781 '+', 'V', 'G', 'S', \
782 '+', 'C', 'M', 'E', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
783 '+', 'C', 'M', 'S', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
784 '\xFF'};
785
786 /* Binary related codes. */
787 typedef enum
788 {
789 ATP_OK_NB = (0x00000000),
790 ATP_CONNECT_NB,
791 ATP_RING_NB,
792 ATP_NO_CARRIER_NB,
793 ATP_ERROR_NB,
794 ATP_NO_DIALTONE_NB = (0x00000006),
795 ATP_BUSY_NB,
796 ATP_NO_ANSWER_NB,
797 ATP_CONNECT_TXT_NB,
798 ATP_PLUS_VGM_NB,
799 ATP_PLUS_VGS_NB,
800 ATP_PLUS_CME_ERROR_NB,
801 ATP_PLUS_CMS_ERROR_NB,
802 ATP_MAX_NB_OF_RESULT_CODES
803 } T_ATP_BINARY_RESULT_CODES;
804
805 /* Related offsets (verbose responses disabled). */
806 #define ATP_OK_OFFSET_V0 (0x00)
807 #define ATP_CONNECT_OFFSET_V0 (ATP_OK_OFFSET_V0 + 0x01)
808 #define ATP_RING_OFFSET_V0 (ATP_CONNECT_OFFSET_V0 + 0x01)
809 #define ATP_NO_CARRIER_OFFSET_V0 (ATP_RING_OFFSET_V0 + 0x01)
810 #define ATP_ERROR_OFFSET_V0 (ATP_NO_CARRIER_OFFSET_V0 + 0x01)
811 #define ATP_NO_DIALTONE_OFFSET_V0 (ATP_ERROR_OFFSET_V0 + 0x01)
812 #define ATP_BUSY_OFFSET_V0 (ATP_NO_DIALTONE_OFFSET_V0 + 0x01)
813 #define ATP_NO_ANSWER_OFFSET_V0 (ATP_BUSY_OFFSET_V0 + 0x01)
814 #define ATP_CONNECT_TXT_OFFSET_V0 (ATP_NO_ANSWER_OFFSET_V0 + 0x01)
815 #define ATP_PLUS_VGM_OFFSET_V0 (ATP_CONNECT_TXT_OFFSET_V0 + 0x07)
816 #define ATP_PLUS_VGS_OFFSET_V0 (ATP_PLUS_VGM_OFFSET_V0 + 0x04)
817 #define ATP_PLUS_CME_ERROR_OFFSET_V0 (ATP_PLUS_VGS_OFFSET_V0 + 0x04)
818 #define ATP_PLUS_CMS_ERROR_OFFSET_V0 (ATP_PLUS_CME_ERROR_OFFSET_V0 + 0x0B)
819 #define ATP_RESULT_CODE_LAST_OFFSET_V0 (ATP_PLUS_CMS_ERROR_OFFSET_V0 + 0x0B)
820
821 /* Related offsets (verbose responses enabled). */
822 #define ATP_OK_OFFSET_V1 (0x00)
823 #define ATP_CONNECT_OFFSET_V1 (ATP_OK_OFFSET_V1 + 0x02)
824 #define ATP_RING_OFFSET_V1 (ATP_CONNECT_OFFSET_V1 + 0x07)
825 #define ATP_NO_CARRIER_OFFSET_V1 (ATP_RING_OFFSET_V1 + 0x04)
826 #define ATP_ERROR_OFFSET_V1 (ATP_NO_CARRIER_OFFSET_V1 + 0x0A)
827 #define ATP_NO_DIALTONE_OFFSET_V1 (ATP_ERROR_OFFSET_V1 + 0x05)
828 #define ATP_BUSY_OFFSET_V1 (ATP_NO_DIALTONE_OFFSET_V1 + 0x0B)
829 #define ATP_NO_ANSWER_OFFSET_V1 (ATP_BUSY_OFFSET_V1 + 0x04)
830 #define ATP_CONNECT_TXT_OFFSET_V1 (ATP_NO_ANSWER_OFFSET_V1 + 0x09)
831 #define ATP_PLUS_VGM_OFFSET_V1 (ATP_CONNECT_TXT_OFFSET_V1 + 0x07)
832 #define ATP_PLUS_VGS_OFFSET_V1 (ATP_PLUS_VGM_OFFSET_V1 + 0x04)
833 #define ATP_PLUS_CME_ERROR_OFFSET_V1 (ATP_PLUS_VGS_OFFSET_V1 + 0x04)
834 #define ATP_PLUS_CMS_ERROR_OFFSET_V1 (ATP_PLUS_CME_ERROR_OFFSET_V1 + 0x0B)
835 #define ATP_RESULT_CODE_LAST_OFFSET_V1 (ATP_PLUS_CMS_ERROR_OFFSET_V1 + 0x0B)
836
837 /* Related structures. */
838 typedef enum
839 {
840 ATP_RESULT_CODE_NOT_DEFINED = (0x00000000),
841 ATP_BASIC_RESULT_CODE,
842 ATP_EXTENDED_RESULT_CODE,
843 ATP_CONNECT_TXT_RESULT_CODE,
844 ATP_PLUS_ERROR_RESULT_CODE
845 } T_ATP_RESULT_CODE_FORMAT;
846
847 #define ATP_OK_PARAM (ATP_BASIC_RESULT_CODE)
848 #define ATP_CONNECT_PARAM (ATP_BASIC_RESULT_CODE)
849 #define ATP_RING_PARAM (ATP_BASIC_RESULT_CODE)
850 #define ATP_NO_CARRIER_PARAM (ATP_BASIC_RESULT_CODE)
851 #define ATP_ERROR_PARAM (ATP_BASIC_RESULT_CODE)
852 #define ATP_NO_DIALTONE_PARAM (ATP_BASIC_RESULT_CODE)
853 #define ATP_BUSY_PARAM (ATP_BASIC_RESULT_CODE)
854 #define ATP_NO_ANSWER_PARAM (ATP_BASIC_RESULT_CODE)
855 #define ATP_CONNECT_TXT_PARAM (ATP_CONNECT_TXT_RESULT_CODE)
856 #define ATP_PLUS_VGM_PARAM (ATP_EXTENDED_RESULT_CODE)
857 #define ATP_PLUS_VGS_PARAM (ATP_EXTENDED_RESULT_CODE)
858 #define ATP_PLUS_CME_ERROR_PARAM (ATP_PLUS_ERROR_RESULT_CODE)
859 #define ATP_PLUS_CMS_ERROR_PARAM (ATP_PLUS_ERROR_RESULT_CODE)
860
861 #define ATP_RESULT_OFFSET_V0_COLUMN (0x00)
862 #define ATP_RESULT_OFFSET_V1_COLUMN (0x01)
863 #define ATP_RESULT_PARAM_COLUMN (0x02)
864
865 static const UINT8 ATP_RESULT_CODE_INFO[ATP_MAX_NB_OF_RESULT_CODES + 0x01][0x03] \
866 = {{ATP_OK_OFFSET_V0, ATP_OK_OFFSET_V1, ATP_OK_PARAM}, \
867 {ATP_CONNECT_OFFSET_V0, ATP_CONNECT_OFFSET_V1, ATP_CONNECT_PARAM}, \
868 {ATP_RING_OFFSET_V0, ATP_RING_OFFSET_V1, ATP_RING_PARAM}, \
869 {ATP_NO_CARRIER_OFFSET_V0, ATP_NO_CARRIER_OFFSET_V1, ATP_NO_CARRIER_PARAM}, \
870 {ATP_ERROR_OFFSET_V0, ATP_ERROR_OFFSET_V1, ATP_ERROR_PARAM}, \
871 {ATP_NO_DIALTONE_OFFSET_V0, ATP_NO_DIALTONE_OFFSET_V1, ATP_RESULT_CODE_NOT_DEFINED}, \
872 {ATP_NO_DIALTONE_OFFSET_V0, ATP_NO_DIALTONE_OFFSET_V1, ATP_NO_DIALTONE_PARAM}, \
873 {ATP_BUSY_OFFSET_V0, ATP_BUSY_OFFSET_V1, ATP_BUSY_PARAM}, \
874 {ATP_NO_ANSWER_OFFSET_V0, ATP_NO_ANSWER_OFFSET_V1, ATP_NO_ANSWER_PARAM}, \
875 {ATP_CONNECT_TXT_OFFSET_V0, ATP_CONNECT_TXT_OFFSET_V1, ATP_CONNECT_TXT_PARAM}, \
876 {ATP_PLUS_VGM_OFFSET_V0, ATP_PLUS_VGM_OFFSET_V1, ATP_PLUS_VGM_PARAM}, \
877 {ATP_PLUS_VGS_OFFSET_V0, ATP_PLUS_VGS_OFFSET_V1, ATP_PLUS_VGS_PARAM}, \
878 {ATP_PLUS_CME_ERROR_OFFSET_V0, ATP_PLUS_CME_ERROR_OFFSET_V1, ATP_PLUS_CME_ERROR_PARAM}, \
879 {ATP_PLUS_CMS_ERROR_OFFSET_V0, ATP_PLUS_CMS_ERROR_OFFSET_V1, ATP_PLUS_CMS_ERROR_PARAM}, \
880 {ATP_RESULT_CODE_LAST_OFFSET_V0, ATP_RESULT_CODE_LAST_OFFSET_V1, ATP_RESULT_CODE_NOT_DEFINED}};
881
882 /* Define the maximum extended result code parameter length: */
883 /* - '=' + <value> (up to 65535). */
884 #define MAX_SINGLE_RESULT_CODE_VALUE_LEN (0x06)
885
886 /* Define the structure associated with extended result codes. The format of */
887 /* such result codes is <result_code>[=<value>] (See Headset Specification, */
888 /* Section 4.7.3). <value> shall consist of a numeric constant. */
889 typedef struct
890 {
891 UINT16 value;
892 } T_ATP_SINGLE_RESULT_CODE_VALUE;
893
894 /* Define all extended syntax result codes. */
895 /* __________________________________________________________________________ */
896 /* | | | | | | */
897 /* | Binary code | Len | Result code | Numeric | Description | */
898 /* |__________________|_____|_____________|_________|_________________________| */
899 /* | | | | | | */
900 /* | ATP_PLUS_VGM_NB | 4 | +VGM | X | Unsolicited result code | */
901 /* | | | | | issued by the AG to set | */
902 /* | | | | | the microphone gain of | */
903 /* | | | | | the HS (See Headset | */
904 /* | | | | | Specification, Section | */
905 /* | | | | | 4.7.3). | */
906 /* | ATP_PLUS_VGS_NB | 4 | +VGS | X | Unsolicited result code | */
907 /* | | | | | issued by the AG to set | */
908 /* | | | | | the speaker gain of the | */
909 /* | | | | | HS (See Headset | */
910 /* | | | | | Specification, Section | */
911 /* | | | | | 4.7.3). | */
912 /* |__________________|_____|_____________|_________|_________________________| */
913 typedef T_ATP_SINGLE_RESULT_CODE_VALUE T_ATP_PLUS_VGM_PARAM;
914 typedef T_ATP_SINGLE_RESULT_CODE_VALUE T_ATP_PLUS_VGS_PARAM;
915
916 /* Define the maximum number of characters appearing in the <text>. */
917 /* - '=' + <value> (up to 65535). */
918 #define MAX_CONNECT_TXT_LEN (MAX_SINGLE_RESULT_CODE_VALUE_LEN)
919
920 /* Define the structure associated with CONNECT<text> result code whose format */
921 /* is CONNECT <text> (See ITU-T Recommendation V.250 ter page 11). <text> */
922 /* should specify the baudrate (1200, 2400, 4800, 9600 ...). */
923 /* __________________________________________________________________________ */
924 /* | | | | | | */
925 /* | Binary code | Len | Result code | Numeric | Description | */
926 /* |__________________|_____|_____________|_________|_________________________| */
927 /* | | | | | | */
928 /* |ATP_CONNECT_TXT_NB| 7 | CONNECT | X | A connection has been | */
929 /* | | | | | established. | */
930 /* |__________________|_____|_____________|_________|_________________________| */
931 typedef T_ATP_SINGLE_RESULT_CODE_VALUE T_ATP_CONNECT_TXT_PARAM;
932
933 /* Define the maximum number of characters appearing in the <error>. */
934 #define MAX_PLUS_ERROR_LEN (30)
935
936 /* Define the structure associated with <error> result code whose format is */
937 /* either +CME ERROR: <error> (See See GSM TS 07.07, Section 9.2) or +CMS */
938 /* ERROR: <error> (See GSM TS 07.05, Section 3.2.5)). */
939 /* __________________________________________________________________________ */
940 /* | | | | | | */
941 /* | Binary code | Len | Result code | Numeric | Description | */
942 /* |_____________________|_____|_____________|_________|______________________| */
943 /* | | | | | | */
944 /* |ATP_PLUS_CME_ERROR_NB| 11 | +CME ERROR: | X | Final result code | */
945 /* | | | | | similar to the | */
946 /* | | | | | regular ERROR result | */
947 /* | | | | | code (See GSM TS | */
948 /* | | | | | 07.07, Section 9.2). | */
949 /* |_____________________|_____|_____________|_________|______________________| */
950 /* | | | | | | */
951 /* |ATP_PLUS_CMS_ERROR_NB| 11 | +CMS ERROR: | X | Final result code | */
952 /* | | | | | that indicates an | */
953 /* | | | | | error related to | */
954 /* | | | | | mobile equipment or | */
955 /* | | | | | network (See GSM TS | */
956 /* | | | | | 07.05, Section | */
957 /* | | | | | 3.2.5). | */
958 /* |_____________________|_____|_____________|_________|______________________| */
959 typedef struct
960 {
961 char error_p[MAX_PLUS_ERROR_LEN];
962 UINT8 error_length;
963 } T_ATP_PLUS_ERROR_RESULT_CODE;
964
965
966 /************************************ MACROS ************************************/
967 /* */
968 /* Define a macro used to compare the first "count" characters of the two */
969 /* buffers "reference" and "buffer". The comparison is not case sensitive. Note */
970 /* that the "reference" must be in all caps. Therefore, the gap between */
971 /* alphabetic lower-case characters and their upper-case equivalents is 0x20 */
972 /* (See CCITT T.50 (1992), International Reference Alphabet). */
973 /* */
974 /* Prototype: */
975 /* ATP_MEM_I_CMP (T_ATP_TXT_CMD reference, */
976 /* T_ATP_TXT_CMD buffer, */
977 /* UINT8 count, */
978 /* BOOLEAN *equal); */
979 #define ATP_MEM_I_CMP(reference, \
980 buffer, \
981 count, \
982 equal) \
983 { \
984 UINT8 nb_byte = 0x00; \
985 while ((nb_byte < (count)) && \
986 (((buffer)[nb_byte] == (reference)[nb_byte]) || \
987 (((buffer)[nb_byte] >= 'a') && \
988 ((buffer)[nb_byte] <= 'z') && \
989 ((reference)[nb_byte] == ((buffer)[nb_byte] - '\x20'))))) \
990 { \
991 nb_byte++; \
992 } \
993 *(equal) = (BOOLEAN) ((nb_byte == (count)) ? (TRUE) : (FALSE)); \
994 }
995
996 /* Define a macro used to compare the first "count" characters of the two */
997 /* buffers "reference" and "buffer". The comparison is not case sensitive. */
998 /* Besides, space characters are ignored and may be used freely for formatting */
999 /* purposes (See ITU-T Recommendation V.250 ter page 4). Note that the */
1000 /* "reference" must be in all caps. Therefore, the gap between alphabetic */
1001 /* lower-case characters and their upper-case equivalents is 0x20 (See CCITT */
1002 /* T.50 (1992), International Reference Alphabet). */
1003 /* */
1004 /* Prototype: */
1005 /* ATP_MEM_SP_I_CMP (T_ATP_TXT_CMD reference, */
1006 /* T_ATP_TXT_CMD buffer, */
1007 /* UINT8 *count, */
1008 /* BOOLEAN *equal); */
1009 #define ATP_MEM_SP_I_CMP(reference, \
1010 buffer, \
1011 count, \
1012 equal) \
1013 { \
1014 UINT8 nb_byte_ref = 0x00; \
1015 UINT8 nb_byte_buf = 0x00; \
1016 while ((nb_byte_ref < *(count)) && \
1017 (((buffer)[nb_byte_buf] == '\x20') || \
1018 ((buffer)[nb_byte_buf] == (reference)[nb_byte_ref]) || \
1019 (((buffer)[nb_byte_buf] >= 'a') && \
1020 ((buffer)[nb_byte_buf] <= 'z') && \
1021 ((reference)[nb_byte_ref] == ((buffer)[nb_byte_buf] - '\x20'))))) \
1022 { \
1023 if ((buffer)[nb_byte_buf++] == '\x20') \
1024 { \
1025 continue; \
1026 } \
1027 nb_byte_ref++; \
1028 } \
1029 *(equal) = (BOOLEAN) ((nb_byte_ref == *(count)) ? (TRUE) : (FALSE)); \
1030 *(count) = nb_byte_buf; \
1031 }
1032
1033
1034 /************************ MACROS DEDICATED TO AT COMMANDS ***********************/
1035 /* */
1036 /* Define a macro used to get the <number> of basic syntax commands. Note that */
1037 /* <number> may be a string of one or more characters from "0" through "9" */
1038 /* representing the decimal integer value (See ITU-T Recommendation V.250 ter */
1039 /* page 5). Besides, if <number> is missing, the "initial_value" is assumed. */
1040 /* */
1041 /* Prototype: */
1042 /* ATP_GET_NUMBER (T_ATP_TXT_CMD cmd_line_p, */
1043 /* UINT16 *number_p, */
1044 /* const char initial_value); */
1045 #define ATP_GET_NUMBER(cmd_line_p, \
1046 number_p, \
1047 initial_value) \
1048 { \
1049 char nb_value_p[0x05] = {'\x00','\x00','\x00','\x00','\x00'}; \
1050 UINT8 nb_digit = 0x00; \
1051 for (*nb_value_p = initial_value; \
1052 ((*(cmd_line_p) >= '0') && (*(cmd_line_p) <= '9')) || \
1053 (*(cmd_line_p) == ' '); \
1054 (cmd_line_p)++) \
1055 { \
1056 if (((*(cmd_line_p) == '0') && (nb_digit == 0x00)) || \
1057 (*(cmd_line_p) == ' '))\
1058 { \
1059 continue; \
1060 } \
1061 nb_value_p[nb_digit++] = *(cmd_line_p); \
1062 } \
1063 *(number_p) = (UINT16) atoi (nb_value_p); \
1064 }
1065
1066 /* Define a macro used to get the <dial_string> of dial (See ITU-T */
1067 /* Recommendation V.250 ter page 31). All characters appearing on the same */
1068 /* command line after D are considered part of the call addressing information */
1069 /* to be signalled to the network, or modifiers used to control the signalling */
1070 /* process, up to a semicolon character or the end of the command line. If the */
1071 /* <dial_string> is terminated by a semicolon, the DCE does not start the call */
1072 /* origination procedure, but instead returns to command state after completion */
1073 /* of the signalling of call addressing information to the network. */
1074 /* */
1075 /* Prototype: */
1076 /* ATP_GET_DIAL_STRING (T_ATP_TXT_CMD cmd_line_p, */
1077 /* T_ATP_TXT_CMD dial_string_p, */
1078 /* UINT8 *dial_string_length_p, */
1079 /* UINT8 *call_type_p, */
1080 /* const char termination_char); */
1081 #define ATP_GET_DIAL_STRING(cmd_line_p, \
1082 dial_string_p, \
1083 dial_string_length_p, \
1084 call_type_p, \
1085 termination_char) \
1086 { \
1087 *(call_type_p) = DATA_CALL; \
1088 for (*(dial_string_length_p) = 0x00; \
1089 (*(cmd_line_p) != termination_char) && \
1090 (*(dial_string_length_p) < MAX_DIAL_STRING_LEN); \
1091 (*(dial_string_length_p))++) \
1092 { \
1093 if (*(cmd_line_p) == ';') \
1094 { \
1095 *(call_type_p) = VOICE_CALL; \
1096 break; \
1097 } \
1098 (dial_string_p)[*(dial_string_length_p)] = *(cmd_line_p)++; \
1099 } \
1100 }
1101
1102 /* Define a macro used to get operators such as "=", "?" or "=?". */
1103 /* */
1104 /* Prototype: */
1105 /* ATP_GET_OPERATOR (T_ATP_TXT_CMD cmd_line_p, */
1106 /* T_ATP_EXTENDED_OPERATOR *s_operator_p); */
1107 #define ATP_GET_OPERATOR(cmd_line_p, \
1108 s_operator_p) \
1109 { \
1110 for (*(s_operator_p) = 0x00; \
1111 ((*(cmd_line_p) == '=') || (*(cmd_line_p) == '?') || \
1112 (*(cmd_line_p) == ' ')); \
1113 (cmd_line_p)++) \
1114 { \
1115 switch (*(cmd_line_p)) \
1116 { \
1117 case '?': \
1118 { \
1119 *(s_operator_p) += 0x01; \
1120 break; \
1121 } \
1122 case '=': \
1123 { \
1124 *(s_operator_p) += 0x02; \
1125 break; \
1126 } \
1127 default: \
1128 { \
1129 break; \
1130 } \
1131 } \
1132 } \
1133 }
1134
1135 /* Define a macro used to get the <value> of S-parameters. Note that <value> */
1136 /* shall consist of a decimal constant (See ITU-T Recommendation V.250 ter page */
1137 /* 6). */
1138 /* */
1139 /* Prototype: */
1140 /* ATP_GET_PARAMETER_VALUE (T_ATP_TXT_CMD cmd_line_p, */
1141 /* T_ATP_EXTENDED_OPERATOR *s_operator_p, */
1142 /* UINT16 *value_p); */
1143 #define ATP_GET_PARAMETER_VALUE(cmd_line_p, \
1144 s_operator_p, \
1145 value_p) \
1146 { \
1147 ATP_GET_OPERATOR((cmd_line_p), \
1148 (s_operator_p)); \
1149 ATP_GET_NUMBER((cmd_line_p), \
1150 (value_p), \
1151 '0'); \
1152 }
1153
1154 /* Define a macro used to proceed with subsequent commands that might follow an */
1155 /* extended syntax command (See ITU-T Recommendation V.250 ter page 9). */
1156 /* */
1157 /* Prototype: */
1158 /* ATP_GET_ADDITIONAL_CMD (T_ATP_TXT_CMD cmd_line_p, */
1159 /* const char termination_char); */
1160 #define ATP_GET_ADDITIONAL_CMD(cmd_line_p, \
1161 termination_char) \
1162 { \
1163 while (*(cmd_line_p) != termination_char) \
1164 { \
1165 if (*(cmd_line_p)++ == ';') \
1166 { \
1167 break; \
1168 } \
1169 } \
1170 }
1171
1172 /* Define a macro used to get the <value> of extended syntax commands. Note */
1173 /* that <value> shall consist of either a numeric constant or a string constant */
1174 /* (See ITU-T Recommendation V.250 ter page 6). However, only numeric constants */
1175 /* are supported for now. */
1176 /* */
1177 /* Prototype: */
1178 /* ATP_GET_VALUE (T_ATP_TXT_CMD cmd_line_p, */
1179 /* T_ATP_EXTENDED_OPERATOR *extended_operator_p, */
1180 /* UINT16 *value_p, */
1181 /* const char termination_char); */
1182 #define ATP_GET_VALUE(cmd_line_p, \
1183 extended_operator_p, \
1184 value_p, \
1185 termination_char) \
1186 { \
1187 ATP_GET_OPERATOR((cmd_line_p), \
1188 (extended_operator_p)); \
1189 ATP_GET_NUMBER((cmd_line_p), \
1190 (value_p), \
1191 '0'); \
1192 ATP_GET_ADDITIONAL_CMD((cmd_line_p), \
1193 (termination_char)); \
1194 }
1195
1196 /* Define a macro used to get the <keys> of keypad control command. Note that */
1197 /* <keys> shall consist of a string constant (See ETS 300 916 (GSM 07.07) */
1198 /* Version 5.8.1 page 62). Note also that <keys> is a string of characters */
1199 /* representing keys (See See ETS 300 916 (GSM 07.07) Version 5.8.1 page 62). */
1200 /* Colon character followed by one character can be used to indicate a */
1201 /* manufacturer specific key not listed here. All characters from a semicolon */
1202 /* character to the next single semicolon character are treated as alpha */
1203 /* entries and are not converted to key equivalents. All semicolon characters */
1204 /* inside alpha entries should be duplicated in the DTE. Pause characters "W" */
1205 /* and "w" can be used to pause between key pressings for a time specified by */
1206 /* <pause>. */
1207 /* */
1208 /* Prototype: */
1209 /* ATP_GET_KEYS (T_ATP_TXT_CMD cmd_line_p, */
1210 /* T_ATP_AT_PLUS_CKPD_PARAM *ckpd_param_p, */
1211 /* const char termination_char); */
1212 #define ATP_GET_KEYS(cmd_line_p, \
1213 ckpd_param_p, \
1214 termination_char) \
1215 { \
1216 ATP_GET_NUMBER((cmd_line_p), \
1217 &((ckpd_param_p)->keys[0x00]), \
1218 '0'); \
1219 (ckpd_param_p)->nb_keys = 0x01; \
1220 ATP_GET_ADDITIONAL_CMD((cmd_line_p), \
1221 (termination_char)); \
1222 }
1223 // { \
1224 // UINT8 nb_keys = 0x00; \
1225 // while (*(cmd_line_p) != termination_char) \
1226 // { \
1227 // if (*(cmd_line_p)++ == '\"') \
1228 // { \
1229 // break; \
1230 // } \
1231 // } \
1232 // while (*(cmd_line_p) != termination_char) \
1233 // { \
1234 // switch (*(cmd_line_p)++) \
1235 // { \
1236 // case ' ': \
1237 // { \
1238 // continue; \
1239 // } \
1240 // case ';': \
1241 // { \
1242 // ATP_GET_NUMBER((cmd_line_p), \
1243 // &((ckpd_param_p)->keys[nb_keys]), \
1244 // '0'); \
1245 // nb_keys++; \
1246 // while (*(cmd_line_p) != termination_char) \
1247 // { \
1248 // if (*(cmd_line_p)++ == ';') \
1249 // { \
1250 // break; \
1251 // } \
1252 // } \
1253 // continue; \
1254 // } \
1255 // case ':': \
1256 // { \
1257 // while (*(cmd_line_p) != termination_char) \
1258 // { \
1259 // if (*(cmd_line_p)++ == ':') \
1260 // { \
1261 // break; \
1262 // } \
1263 // } \
1264 // continue; \
1265 // } \
1266 // case '\"': \
1267 // { \
1268 // break; \
1269 // } \
1270 // default: \
1271 // { \
1272 // (ckpd_param_p)->keys[nb_keys] = (UINT16) (*(cmd_line_p - 0x01)); \
1273 // nb_keys++; \
1274 // continue; \
1275 // } \
1276 // } \
1277 // break; \
1278 // } \
1279 // (ckpd_param_p)->nb_keys = nb_keys; \
1280 // }
1281
1282 /* Define a macro used to proceed with subsequent numeric and string values */
1283 /* that might appear in a compound value (See ITU-T Recommendation V.250 ter */
1284 /* page 7). */
1285 /* */
1286 /* Prototype: */
1287 /* ATP_GET_ADDITIONAL_VALUE (T_ATP_TXT_CMD cmd_line_p, */
1288 /* const char termination_char); */
1289 #define ATP_GET_ADDITIONAL_VALUE(cmd_line_p, \
1290 termination_char) \
1291 { \
1292 while (*(cmd_line_p) != termination_char) \
1293 { \
1294 switch (*(cmd_line_p)) \
1295 { \
1296 case ',': \
1297 { \
1298 cmd_line_p++; \
1299 } \
1300 case ';': \
1301 { \
1302 break; \
1303 } \
1304 default: \
1305 { \
1306 cmd_line_p++; \
1307 continue; \
1308 } \
1309 } \
1310 break; \
1311 } \
1312 }
1313
1314 /* Define a macro used to get the <keys>,<time> and <pause> of keypad control */
1315 /* command. Note that <keys> shall consist of a string constant and <time> and */
1316 /* <pause> shall consist of numeric constants in tenths of a second (See ETS */
1317 /* 300 916 (GSM 07.07) Version 5.8.1 page 62). */
1318 /* */
1319 /* Prototype: */
1320 /* ATP_GET_CKPD_PARAM (T_ATP_TXT_CMD cmd_line_p, */
1321 /* T_ATP_AT_PLUS_CKPD_PARAM *ckpd_param_p, */
1322 /* const char termination_char); */
1323 #define ATP_GET_CKPD_PARAM(cmd_line_p, \
1324 ckpd_param_p, \
1325 termination_char) \
1326 { \
1327 ATP_GET_OPERATOR((cmd_line_p), \
1328 &((ckpd_param_p)->extended_operator)); \
1329 ATP_GET_KEYS((cmd_line_p), \
1330 (ckpd_param_p), \
1331 (termination_char)); \
1332 ATP_GET_ADDITIONAL_VALUE((cmd_line_p), \
1333 (termination_char)); \
1334 ATP_GET_NUMBER((cmd_line_p), \
1335 &((ckpd_param_p)->time), \
1336 '0'); \
1337 ATP_GET_ADDITIONAL_VALUE((cmd_line_p), \
1338 (termination_char)); \
1339 ATP_GET_NUMBER((cmd_line_p), \
1340 &((ckpd_param_p)->pause), \
1341 '0'); \
1342 ATP_GET_ADDITIONAL_CMD((cmd_line_p), \
1343 (termination_char)); \
1344 }
1345
1346
1347 /************************ MACRO DEDICATED TO RESULT CODES ***********************/
1348 /* */
1349 /* Define a macro used to get the <value> associated with extended result codes */
1350 /* (See Headset Specification, Section 4.7.3). Note that <value> shall consist */
1351 /* of a numeric constant. */
1352 /* */
1353 /* Prototype: */
1354 /* ATP_GET_RESULT_CODE_VALUE (T_ATP_TXT_CMD cmd_line_p, */
1355 /* UINT16 *value_p); */
1356 #define ATP_GET_RESULT_CODE_VALUE(cmd_line_p, \
1357 value_p) \
1358 { \
1359 UINT8 result_operator = 0x00; \
1360 ATP_GET_OPERATOR((cmd_line_p), \
1361 &result_operator); \
1362 ATP_GET_NUMBER((cmd_line_p), \
1363 (value_p), \
1364 '0'); \
1365 }
1366
1367 /* Define a macro used to get the <text> associated with CONNECT <text> result */
1368 /* code (See ITU-T Recommendation V.250 ter page 11). */
1369 /* */
1370 /* Prototype: */
1371 /* ATP_GET_CONNECT_TXT (T_ATP_TXT_CMD cmd_line_p, */
1372 /* UINT16 *value_p); */
1373 #define ATP_GET_CONNECT_TXT(cmd_line_p, \
1374 value_p) \
1375 { \
1376 ATP_GET_NUMBER((cmd_line_p), \
1377 (value_p), \
1378 '0'); \
1379 }
1380
1381 /* Define a macro used to get the <error> of +CME ERROR (See See GSM TS 07.07, */
1382 /* Section 9.2) and +CMS ERROR (See GSM TS 07.05, Section 3.2.5)) result codes. */
1383 /* */
1384 /* Prototype: */
1385 /* ATP_PLUS_ERROR_STRING (T_ATP_TXT_CMD cmd_line_p, */
1386 /* T_ATP_TXT_CMD error_p, */
1387 /* UINT8 *error_length_p, */
1388 /* const char termination_char); */
1389 #define ATP_PLUS_ERROR_STRING(cmd_line_p, \
1390 error_p, \
1391 error_length_p, \
1392 termination_char) \
1393 { \
1394 for (*(error_length_p) = 0x00; \
1395 (*(cmd_line_p) != termination_char) && \
1396 (*(error_length_p) < MAX_PLUS_ERROR_LEN); \
1397 (*(error_length_p))++) \
1398 { \
1399 (error_p)[*(error_length_p)] = *(cmd_line_p)++; \
1400 } \
1401 }
1402
1403
1404 /************************** MACRO DEDICATED TO RAW DATA *************************/
1405 /* */
1406 /* Define a macro used to get the length of unknown commands from raw data, */
1407 /* <CR> not included. Note that all characters appearing on the same command */
1408 /* line are considered part of the unknown command, up to the end of the */
1409 /* command line. */
1410 /* */
1411 /* Prototype: */
1412 /* ATP_GET_UNKNOWN_CMD_LEN (T_ATP_TXT_CMD cmd_line_p, */
1413 /* UINT8 *cmd_length_p); */
1414 /* const char termination_char); */
1415 #define ATP_GET_UNKNOWN_CMD_LEN(cmd_line_p, \
1416 cmd_length_p, \
1417 termination_char) \
1418 { \
1419 for (*(cmd_length_p) = 0x00; \
1420 (cmd_line_p)[*(cmd_length_p)] != termination_char; \
1421 (*(cmd_length_p))++) \
1422 { \
1423 } \
1424 }
1425
1426 /* Define a macro used to get the length of unknown AT commands from raw data, */
1427 /* <CR> or semicolon not included. Note that all characters appearing on the */
1428 /* same command line are considered part of the unknown command, up to a */
1429 /* semicolon character or the end of the command line. */
1430 /* */
1431 /* Prototype: */
1432 /* ATP_GET_UNKNOWN_AT_CMD_LEN (T_ATP_TXT_CMD cmd_line_p, */
1433 /* UINT8 *cmd_length_p); */
1434 /* const char termination_char); */
1435 #define ATP_GET_UNKNOWN_AT_CMD_LEN(cmd_line_p, \
1436 cmd_length_p, \
1437 termination_char) \
1438 { \
1439 for (*(cmd_length_p) = 0x00; \
1440 ((cmd_line_p)[*(cmd_length_p)] != termination_char) && \
1441 ((cmd_line_p)[*(cmd_length_p)] != ';'); \
1442 (*(cmd_length_p))++) \
1443 { \
1444 } \
1445 }
1446
1447 #endif