comparison src/g23m-aci/aci/aci_bat_csc.c @ 1:fa8dc04885d8

src/g23m-*: import from Magnetite
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 16 Oct 2020 06:25:50 +0000
parents
children
comparison
equal deleted inserted replaced
0:4e78acac3d88 1:fa8dc04885d8
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-F&D (8411)
4 | Modul : ACI_BAT
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This BAT wrapper modul is ...
18 |
19 +-----------------------------------------------------------------------------
20 */
21
22 #include "aci_all.h" /* includes prim.h, which includes p_bat.h */
23 #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */
24 #include "aci_cmd.h"
25 #include "aci_lst.h"
26 #include "ati_int.h"
27 #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */
28 #include "aci_bat.h"
29
30
31 /*
32 +--------------------------------------------------------------------+
33 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
34 | STATE : code ROUTINE : sBAT_PercentBAND |
35 +--------------------------------------------------------------------+
36
37 PURPOSE :
38 */
39 GLOBAL T_ACI_BAT_RSLT sBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
40 T_BAT_cmd_send *cmd)
41 {
42 T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
43 T_BAT_cmd_set_percent_band *band = cmd->params.ptr_set_percent_band;
44
45 TRACE_FUNCTION ("sBAT_PercentBAND()");
46
47 /* Pass the value directly as given by the BAT application */
48 if (band->band NEQ BAT_P_BAND_BAND_NOT_PRESENT)
49 {
50 ret = (T_ACI_BAT_RSLT)sAT_PercentBAND((T_ACI_CMD_SRC)src_infos_psi->srcId,
51 (T_ACI_BAND_MODE)band->mode, (U8)band->band);
52 }
53
54 return ret;
55 }
56
57 /*
58 +--------------------------------------------------------------------+
59 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
60 | STATE : code ROUTINE : tBAT_PercentBAND |
61 +--------------------------------------------------------------------+
62
63 PURPOSE :
64 */
65 GLOBAL T_ACI_BAT_RSLT tBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
66 T_BAT_cmd_send *cmd)
67 {
68 TRACE_FUNCTION ("tBAT_PercentBAND()");
69 return (ACI_BAT_FAIL);
70 }
71
72 /*
73 +--------------------------------------------------------------------+
74 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
75 | STATE : code ROUTINE : qBAT_PercentBAND |
76 +--------------------------------------------------------------------+
77
78 PURPOSE :
79 */
80 GLOBAL T_ACI_BAT_RSLT qBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
81 T_BAT_cmd_send *cmd)
82 {
83 T_ACI_BAT_RSLT ret;
84 T_BAT_cmd_response resp;
85 T_BAT_res_que_percent_band band;
86
87 TRACE_FUNCTION ("qBAT_PercentBAND()");
88
89 resp.ctrl_response = BAT_RES_QUE_PERCENT_BAND;
90 resp.response.ptr_que_percent_band = &band;
91 /* Band initial value should be assigned to 0 */
92 resp.response.ptr_que_percent_band->band = BAT_P_BAND_BAND_NOT_PRESENT;
93
94 ret = (T_ACI_BAT_RSLT)qAT_PercentBAND((T_ACI_CMD_SRC)src_infos_psi->srcId,
95 (T_ACI_BAND_MODE*)&band.mode, (U8*)&band.band);
96
97 aci_bat_send(src_infos_psi, &resp);
98 return (ret);
99 }
100
101 /*
102 +--------------------------------------------------------------------+
103 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
104 | STATE : code ROUTINE : qBAT_PercentCPI |
105 +--------------------------------------------------------------------+
106
107 PURPOSE :
108 */
109 GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPI(T_ACI_DTI_PRC_PSI *src_infos_psi,
110 T_BAT_cmd_send *cmd)
111 {
112 T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
113 T_BAT_cmd_response resp;
114 /* T_BAT_res_que_percent_cpi cpi; */
115
116 TRACE_FUNCTION ("qBAT_PercentCPI()");
117
118 /* resp.ctrl_response = BAT_RES_QUE_PERCENT_CPI; */
119 /* hmm, do not know which ACI function to call ! */
120 aci_bat_send(src_infos_psi, &resp);
121 return (ret);
122 }
123
124 /*
125 +--------------------------------------------------------------------+
126 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
127 | STATE : code ROUTINE : qBAT_PercentCNAP |
128 +--------------------------------------------------------------------+
129
130 PURPOSE :
131 */
132 GLOBAL T_ACI_BAT_RSLT qBAT_PercentCNAP(T_ACI_DTI_PRC_PSI *src_infos_psi,
133 T_BAT_cmd_send *cmd)
134 {
135 T_ACI_BAT_RSLT ret;
136 T_BAT_cmd_response resp;
137 T_BAT_res_que_percent_cnap cnap;
138
139 TRACE_FUNCTION ("qBAT_PercentCNAP()");
140
141 resp.ctrl_response = BAT_RES_QUE_PERCENT_CNAP;
142 resp.response.ptr_que_percent_cnap = &cnap;
143
144 ret = (T_ACI_BAT_RSLT)qAT_PercentCNAP((T_ACI_CMD_SRC)src_infos_psi->srcId);
145 aci_bat_send(src_infos_psi, &resp);
146 return (ret);
147 }
148
149 /*
150 +--------------------------------------------------------------------+
151 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
152 | STATE : code ROUTINE : sBAT_PercentALS |
153 +--------------------------------------------------------------------+
154
155 PURPOSE :
156 */
157 GLOBAL T_ACI_BAT_RSLT sBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
158 T_BAT_cmd_send *cmd)
159 {
160 T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
161 T_ACI_ALS_MOD ALSmode;
162
163 TRACE_FUNCTION ("sBAT_PercentALS()");
164
165 #ifndef _SIMULATION_
166 /* mapping for SAP BAT %ALS values according to 8415.052.doc */
167 switch( cmd->params.ptr_set_percent_als->mode )
168 {
169 case BAT_P_ALS_MOD_SPEECH:
170 ALSmode = ALS_MOD_SPEECH;
171 break;
172
173 case BAT_P_ALS_MOD_AUX_SPEECH:
174 ALSmode = ALS_MOD_AUX_SPEECH;
175 break;
176
177 default:
178 cmdCmeError(CME_ERR_OpNotSupp);
179 return (ACI_BAT_FAIL);
180 }
181 #else /* if SIMULATION */
182 ALSmode = cmd->params.ptr_set_percent_als->mode;
183 #endif /* SIMULATION */
184 ret = (T_ACI_BAT_RSLT)sAT_PercentALS((T_ACI_CMD_SRC)src_infos_psi->srcId, ALSmode);
185 return (ret);
186 }
187
188 /*
189 +--------------------------------------------------------------------+
190 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
191 | STATE : code ROUTINE : tBAT_PercentALS |
192 +--------------------------------------------------------------------+
193
194 PURPOSE :
195 */
196 GLOBAL T_ACI_BAT_RSLT tBAT_PercentALS (T_ACI_DTI_PRC_PSI *src_infos_psi,
197 T_BAT_cmd_send *cmd)
198 {
199 TRACE_FUNCTION ("tBAT_PercentALS()");
200 return (ACI_BAT_FAIL);
201 }
202
203 /*
204 +--------------------------------------------------------------------+
205 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
206 | STATE : code ROUTINE : qBAT_PercentALS |
207 +--------------------------------------------------------------------+
208
209 PURPOSE :
210 */
211 GLOBAL T_ACI_BAT_RSLT qBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
212 T_BAT_cmd_send *cmd)
213 {
214 T_ACI_BAT_RSLT ret;
215 T_BAT_cmd_response resp;
216 T_BAT_res_que_percent_als als;
217 T_ACI_ALS_MOD als_aci_mode;
218
219 TRACE_FUNCTION ("qBAT_PercentALS()");
220
221 resp.ctrl_response = BAT_RES_QUE_PERCENT_ALS;
222 resp.response.ptr_que_percent_als = &als;
223
224 ret = (T_ACI_BAT_RSLT)qAT_PercentALS((T_ACI_CMD_SRC)src_infos_psi->srcId,&als_aci_mode);
225 switch(als_aci_mode)
226 {
227 case ALS_MOD_SPEECH:
228 als.mode = BAT_P_ALS_MOD_SPEECH;
229 break;
230
231 case ALS_MOD_AUX_SPEECH:
232 als.mode = BAT_P_ALS_MOD_AUX_SPEECH;
233 break;
234
235 default:
236 cmdCmeError(CME_ERR_OpNotSupp);
237 return (ACI_BAT_FAIL);
238 }
239 aci_bat_send(src_infos_psi, &resp);
240 return (ret);
241 }
242
243 /*
244 +--------------------------------------------------------------------+
245 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
246 | STATE : code ROUTINE : sBAT_PercentPPP |
247 +--------------------------------------------------------------------+
248
249 PURPOSE :
250 */
251 #if defined(FF_WAP) || defined(FF_PPP) || defined(FF_SAT_E)
252
253 GLOBAL T_ACI_BAT_RSLT sBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi,
254 T_BAT_cmd_send *cmd)
255 {
256 T_ACI_BAT_RSLT ret;
257
258 TRACE_FUNCTION ("sBAT_PercentPPP()");
259
260 ret = (T_ACI_BAT_RSLT)sAT_PercentPPP((T_ACI_CMD_SRC)src_infos_psi->srcId,
261 (T_ACI_PPP_PROT)cmd->params.ptr_set_percent_ppp->authprot,
262 (CHAR *)cmd->params.ptr_set_percent_ppp->user,
263 (CHAR *)cmd->params.ptr_set_percent_ppp->password,
264 (T_ACI_PPP_CON)cmd->params.ptr_set_percent_ppp->conn_type);
265
266 return (ret);
267 }
268
269 /*
270 +--------------------------------------------------------------------+
271 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
272 | STATE : code ROUTINE : qBAT_PercentPPP |
273 +--------------------------------------------------------------------+
274
275 PURPOSE :
276 */
277
278 GLOBAL T_ACI_BAT_RSLT qBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi,
279 T_BAT_cmd_send *cmd)
280 {
281 T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
282 T_BAT_cmd_response resp;
283 T_BAT_res_que_percent_ppp ppp;
284
285 TRACE_FUNCTION ("qBAT_PercentPPP()");
286
287 resp.ctrl_response = BAT_RES_QUE_PERCENT_PPP;
288 resp.response.ptr_que_percent_ppp = &ppp;
289
290 ret = (T_ACI_BAT_RSLT) qAT_PercentPPP(src_infos_psi->srcId, (ULONG*)&ppp.ipaddr, (ULONG*)&ppp.dns1,(ULONG*)&ppp.dns2);
291 aci_bat_send(src_infos_psi, &resp);
292 return (ret);
293 }
294 #endif /* defined(FF_WAP) || defined(FF_PPP) || defined(FF_SAT_E) */
295